Provided by: manpages-ja_0.5.0.0.20221215+dfsg-1_all bug

名前

       standards - C と UNIX の標準規格

説明

       多くのマニュアルページの「準拠 (CONFORMING TO)」の章は、 そのページに記載されたインターフェースが準拠する
       各種の標準規格を示すものである。 以下にこれらの標準規格の簡単な説明を記す。

       V7     バージョン 7 (第 7 版とも呼ばれる) UNIX。 1979 年に AT&T/Bell Labs によりリリースされた。 この時点
              以降、 UNIX システムは BSD と System V の二つの系譜に分かれた。

       4.2BSD カリフォルニア大バークレー校  (the  University  of  California  at Berkeley)  によりリリースされた
              Berkeley   Software    Distribution    リリース    4.2    によって規定された、実装に基づく標準規格
              (implementation  standard)。 バークレーによるリリースの中で TCP/IP スタックとソケット API を含む最
              初のリリースである。

              これより前のBSD の主なリリースとしては 3BSD (1980), 4BSD (1980), 4.1BSD (1981) がある。

       4.3BSD 1986 年にリリースされた 4.2BSD の後継。

       4.4BSD 1993 年にリリースされた 4.3BSD の後継。 バークレー (Berkeley) による最後の大きなリリースである。

       System V
              AT&T の商用 System V (5) リリースの 1983 年版により規定された 実装に基づく標準規格。 一つ前の AT&T
              の大きなリリースは 1981 年にリリースされた System III である。

       System V release 2 (SVr2)
              System  V  の二番目のリリースであり、1985  年に作成された。  SVr2  は正式には  1985 年に発行された
              System V Interface Definition version 1 (SVID 1)  に記載されている。

       System V release 3 (SVr3)
              SVr2  の後継。1986  年にリリースされた。  このリリースは正式には  System  V  Interface  Definition
              version 2 (SVID 2)  に記載されている。

       System V release 4 (SVr4)
              SVr3   の後継。1989   年にリリースされた。  このバージョンの  System  V  については  "Programmer's
              Reference  Manual:  Operating  System  API   (Intel   processors)"   (Prentice-Hall   1992,   ISBN
              0-13-951294-2)  に記載されている。  このリリースは正式には System V Interface Definition version 3
              (SVID 3)  に記載されており、System V の最終的なリリースと考えられている。

       SVID 4 System   V   Interface   Definition   version   4。   1995   年に発行された。   インターネットでは
              ⟨http://www.sco.com/developers/devspecs/⟩ で入手できる。

       C89    最初の  C 言語の標準規格である。 ANSI (American National Standards Institute) により 1989 年の承認
              された (X3.159-1989)。 時には、この規格は ANSI C とも呼ばれるが、 C99 も ANSI 標準なので、この言い
              方はあいまいである。 この規格は 1990 年に ISO (International Standards Organization) による 承認も
              受けており (ISO/IEC 9899:1990)、 そのため ISO C90 として参照されることもたまにある。

       C99    C   言語の標準規格のこの改訂版は   ISO   により   1999   年に承認された   (ISO/IEC    9899:1999)。
              ⟨http://www.open-std.org/jtc1/sc22/wg14/www/standards⟩ からオンラインで入手可能である。

       C11    C    言語の標準規格のこの改訂版は   ISO   により   2011   年に承認された   (ISO/IEC   9899:2011)。
              ⟨http://www.open-std.org/jtc1/sc22/wg14/www/standards⟩ からオンラインで入手可能である。

              LFS The Large File Summit specification, completed in 1996.  This specification defined mechanisms
              that  allowed  32-bit  systems to support the use of large files (i.e., 64-bit file offsets).  See
              ⟨https://www.opengroup.org/platform/lfs.html⟩.

       POSIX.1-1988
              This was the first POSIX standard, ratified by IEEE as  IEEE  Std  1003.1-1988,  and  subsequently
              adopted (with minor revisions) as an ISO standard in 1990.  The term "POSIX" was coined by Richard
              Stallman.

       POSIX.1-1990
              "Portable Operating System Interface  for  Computing  Environments".   IEEE  1003.1-1990  part  1,
              ratified by ISO in 1990 (ISO/IEC 9945-1:1990).

       POSIX.2
              IEEE Std 1003.2-1992.  コマンドとユーティリティについて説明が書かれており、 1993 年に ISO により承
              認された (ISO/IEC 9945-2:1993)。

       POSIX.1b (以前は POSIX.4 とも言われた)
              IEEE Std 1003.1b-1993.  移植可能なオペレーティングシステムのためのリアルタイム機能について  記載さ
              れており、 1996 年の ISO により承認された (ISO/IEC 9945-1:1996)。

       POSIX.1c  (formerly known as POSIX.4a)
              IEEE Std 1003.1c-1995.  POSIX スレッドインターフェースについて記載している。

       POSIX.1d
              IEEE Std 1003.1c-1999.  追加のリアルタイム拡張について記載している。

       POSIX.1g
              IEEE Std 1003.1g-2000.  (ソケットを含めた) ネットワーク API について記載している。

       POSIX.1j
              IEEE Std 1003.1j-2000.  高度なリアルタイム拡張について記載している。

       POSIX.1-1996
              POSIX.1 の 1996 年の改訂版。 POSIX.1b と POSIX.1c を取り込んでいる。

       XPG3   Released  in  1989,  this  was  the first release of the X/Open Portability Guide to be based on a
              POSIX standard (POSIX.1-1988).  This multivolume guide  was  developed  by  the  X/Open  Group,  a
              multivendor consortium.

       XPG4   A revision of the X/Open Portability Guide, released in 1992.  This revision incorporated POSIX.2.

       XPG4v2 XPG4  の 1994年改訂版。 Spec 1170 とも呼ばれる。 1170 とはこの標準規格が定義しているインターフェー
              スの数を表すものである。

       SUS (SUSv1)
              Single UNIX Specification.  この規格は、XPG4v2 やその他の  X/Open  による標準規格  (X/Open  Curses
              Issue 4 version 2, X/Open Networking Service (XNS) Issue 4)  を再構成したものである。 この規格に準
              拠するシステムは UNIX 95 を名乗ることができる。

       SUSv2  Single UNIX Specification version 2. (正しくないが) XPG5 と呼ばれることもある。 この規格は 1997 年
              に登場した。  この規格に準拠するシステムは  UNIX  98  を名乗ることができる。  ⟨http://www.unix.org
              /version2/⟩ も参照のこと。

       POSIX.1-2001, SUSv3
              This was a 2001 revision and consolidation of the POSIX.1,  POSIX.2,  and  SUS  standards  into  a
              single  document,  conducted  under  the  auspices  of  the Austin Group ⟨http://www.opengroup.org
              /austin/⟩.  The standard is available online at ⟨http://www.unix.org/version3/⟩.

              The standard defines two levels of conformance: POSIX conformance, which  is  a  baseline  set  of
              interfaces required of a conforming system; and XSI Conformance, which additionally mandates a set
              of interfaces (the "XSI extension") which are only optional for POSIX conformance.  XSI-conformant
              systems can be branded UNIX 03.

              POSIX.1-2001 文書は 4つの部分に分けることができる:

              XBD: 定義、用語と概念、ヘッダーファイルの仕様。

              XSH: 関数の仕様 (関数とは、実際の実装でのシステムコールと ライブラリ関数のことである)。

              XCU: コマンドとユーティリティの仕様 (以前、 POSIX.2 に記載されていた内容)。

              XRAT: 参考情報と規格のそれ以外の部分

              POSIX.1-2001 は C99 と整合がとられており、 C99 で標準化されたライブラリ関数は POSIX.1-2001 でも 標
              準化されている。

              The Single UNIX Specification version 3 (SUSv3) comprises the Base Specifications containing  XBD,
              XSH,  XCU,  and XRAT as above, plus X/Open Curses Issue 4 version 2 as an extra volume that is not
              in POSIX.1-2001.

              Two Technical Corrigenda (minor fixes and  improvements)   of  the  original  2001  standard  have
              occurred: TC1 in 2003 and TC2 in 2004.

       POSIX.1-2008, SUSv4
              POSIX.1/SUS  の次の改訂版に関する作業は 2008 年に完了し承認された。この標準は ⟨http://www.unix.org
              /version4/⟩.  からオンラインで入手できる。

              この改訂版での変更は POSIX.1-2001/SUSv3 で行われた変更ほど大きくないが、  多くの新しいインターフェ
              イスが追加され、既存の仕様に関しても 種々の詳細が変更されている。 POSIX.1-2001 では任意 (optional)
              とされていたインターフェイスの多くが 2008 年版の標準では必須 (mandatory) になる。 POSIX.1-2001  に
              存在するインターフェイスのいくつかは、  POSIX.1-2008 では廃止予定の印が付けられたり、 標準から完全
              に削除されたりしている。

              The revised standard is  structured  in  the  same  way  as  its  predecessor.   The  Single  UNIX
              Specification  version  4  (SUSv4) comprises the Base Specifications containing XBD, XSH, XCU, and
              XRAT, plus X/Open Curses Issue 7 as an extra volume that is not in POSIX.1-2008.

              Again there are two levels of conformance: the baseline POSIX Conformance,  and  XSI  Conformance,
              which mandates an additional set of interfaces beyond those in the base specification.

              一般には、マニュアルページの「準拠」の章のリストに  POSIX.1-2001  が  あれば、他に注意書きがなけれ
              ば、そのインターフェイスは POSIX.1-2008 にも準拠していると考えてよい。

              この標準の Technical Corrigendum 1 (正誤表 1; 細かな修正と改良) が 2013 年にリリースされた。

              この標準の Technical Corrigendum 2 (正誤表 2) が 2016 年にリリースされた。

              詳しい情報は Austin Group のウェブサイト ⟨http://www.opengroup.org/austin/⟩ に載っている。

       SUSv4 2016 edition
              This is equivalent to POSIX.1-2008, with the addition of Technical Corrigenda  1  and  2  and  the
              XCurses specification.

       POSIX.1-2017
              This  revision of POSIX is technically identical to POSIX.1-2008 with Technical Corrigenda 1 and 2
              applied.

       SUSv4 2018 edition
              This is equivalent to POSIX.1-2017, with the addition of the XCurses specification.

       The interfaces documented in POSIX.1/SUS are available as manual pages under sections 0p (header  files),
       1p (commands), and 3p (functions); thus one can write "man 3p open".

関連項目

       getconf(1),   confstr(3),   pathconf(3),   sysconf(3),  attributes(7),  feature_test_macros(7),  libc(7),
       posixoptions(7), system_data_types(7)

この文書について

       この man ページは Linux man-pages プロジェクトのリリース 5.10  の一部である。プロジェクトの説明とバグ報告
       に関する情報は https://www.kernel.org/doc/man-pages/ に書かれている。