NAME

       fallocate - preallocate or deallocate space to a file

SYNOPSIS

       fallocate [-c|-p|-z] [-o offset] -l length [-n] filename

       fallocate -d [-o offset] [-l length] filename

       fallocate -x [-o offset] -l length filename

DESCRIPTION

       fallocate is used to manipulate the allocated disk space for a file, either to deallocate
       or preallocate it. For filesystems which support the fallocate(2) system call,
       preallocation is done quickly by allocating blocks and marking them as uninitialized,
       requiring no IO to the data blocks. This is much faster than creating a file by filling it
       with zeroes.

       The exit status returned by fallocate is 0 on success and 1 on failure.

OPTIONS

       The length and offset arguments may be followed by the multiplicative suffixes KiB
       (=1024), MiB (=1024*1024), and so on for GiB, TiB, PiB, EiB, ZiB, and YiB (the "iB" is
       optional, e.g., "K" has the same meaning as "KiB") or the suffixes KB (=1000), MB
       (=1000*1000), and so on for GB, TB, PB, EB, ZB, and YB.

       The options --collapse-range, --dig-holes, --punch-hole, and --zero-range are mutually
       exclusive.

       -c, --collapse-range
           Removes a byte range from a file, without leaving a hole. The byte range to be
           collapsed starts at offset and continues for length bytes. At the completion of the
           operation, the contents of the file starting at the location offset+length will be
           appended at the location offset, and the file will be length bytes smaller. The option
           --keep-size may not be specified for the collapse-range operation.

           Available since Linux 3.15 for ext4 (only for extent-based files) and XFS.

           A filesystem may place limitations on the granularity of the operation, in order to
           ensure efficient implementation. Typically, offset and length must be a multiple of
           the filesystem logical block size, which varies according to the filesystem type and
           configuration. If a filesystem has such a requirement, the operation will fail with
           the error EINVAL if this requirement is violated.

       -d, --dig-holes
           Detect and dig holes. This makes the file sparse in-place, without using extra disk
           space. The minimum size of the hole depends on filesystem I/O block size (usually 4096
           bytes). Also, when using this option, --keep-size is implied. If no range is specified
           by --offset and --length, then the entire file is analyzed for holes.

           You can think of this option as doing a "cp --sparse" and then renaming the
           destination file to the original, without the need for extra disk space.

           See --punch-hole for a list of supported filesystems.

       -i, --insert-range
           Insert a hole of length bytes from offset, shifting existing data.

       -l, --length length
           Specifies the length of the range, in bytes.

       -n, --keep-size
           Do not modify the apparent length of the file. This may effectively allocate blocks
           past EOF, which can be removed with a truncate.

       -o, --offset offset
           Specifies the beginning offset of the range, in bytes.

       -p, --punch-hole
           Deallocates space (i.e., creates a hole) in the byte range starting at offset and
           continuing for length bytes. Within the specified range, partial filesystem blocks are
           zeroed, and whole filesystem blocks are removed from the file. After a successful
           call, subsequent reads from this range will return zeroes. This option may not be
           specified at the same time as the --zero-range option. Also, when using this option,
           --keep-size is implied.

           Supported for XFS (since Linux 2.6.38), ext4 (since Linux 3.0), Btrfs (since Linux
           3.7), tmpfs (since Linux 3.5) and gfs2 (since Linux 4.16).

       -v, --verbose
           Enable verbose mode.

       -x, --posix
           Enable POSIX operation mode. In that mode allocation operation always completes, but
           it may take longer time when fast allocation is not supported by the underlying
           filesystem.

       -z, --zero-range
           Zeroes space in the byte range starting at offset and continuing for length bytes.
           Within the specified range, blocks are preallocated for the regions that span the
           holes in the file. After a successful call, subsequent reads from this range will
           return zeroes.

           Zeroing is done within the filesystem preferably by converting the range into
           unwritten extents. This approach means that the specified range will not be physically
           zeroed out on the device (except for partial blocks at the either end of the range),
           and I/O is (otherwise) required only to update metadata.

           Option --keep-size can be specified to prevent file length modification.

           Available since Linux 3.14 for ext4 (only for extent-based files) and XFS.

       -h, --help
           Display help text and exit.

       -V, --version
           Print version and exit.

AUTHORS

       Eric Sandeen <sandeen@redhat.com>, Karel Zak <kzak@redhat.com>

SEE ALSO

       truncate(1), fallocate(2), posix_fallocate(3)

REPORTING BUGS

       For bug reports, use the issue tracker at https://github.com/util-linux/util-linux/issues.

AVAILABILITY

       The fallocate command is part of the util-linux package which can be downloaded from Linux
       Kernel Archive <https://www.kernel.org/pub/linux/utils/util-linux/>.