Provided by: manpages-dev_6.8-2_all bug

NAME

       memfd_create - create an anonymous file

LIBRARY

       Standard C library (libc, -lc)

SYNOPSIS

       #define _GNU_SOURCE         /* See feature_test_macros(7) */
       #include <sys/mman.h>

       int memfd_create(const char *name, unsigned int flags);

DESCRIPTION

       memfd_create()  creates an anonymous file and returns a file descriptor that refers to it.
       The file behaves like a regular file, and so can be  modified,  truncated,  memory-mapped,
       and  so  on.   However,  unlike a regular file, it lives in RAM and has a volatile backing
       storage.  Once all references to the file  are  dropped,  it  is  automatically  released.
       Anonymous  memory  is used for all backing pages of the file.  Therefore, files created by
       memfd_create() have the same semantics as other anonymous memory allocations such as those
       allocated using mmap(2) with the MAP_ANONYMOUS flag.

       The initial size of the file is set to 0.  Following the call, the file size should be set
       using ftruncate(2).  (Alternatively, the file may be populated by  calls  to  write(2)  or
       similar.)

       The name supplied in name is used as a filename and will be displayed as the target of the
       corresponding symbolic link in the directory /proc/self/fd/.  The displayed name is always
       prefixed  with  memfd:  and  serves  only for debugging purposes.  Names do not affect the
       behavior of the file descriptor, and as such multiple files can have the same name without
       any side effects.

       The   following   values  may  be  bitwise  ORed  in  flags  to  change  the  behavior  of
       memfd_create():

       MFD_CLOEXEC
              Set the close-on-exec (FD_CLOEXEC) flag  on  the  new  file  descriptor.   See  the
              description of the O_CLOEXEC flag in open(2) for reasons why this may be useful.

       MFD_ALLOW_SEALING
              Allow  sealing  operations on this file.  See the discussion of the F_ADD_SEALS and
              F_GET_SEALS operations in fcntl(2), and also NOTES,  below.   The  initial  set  of
              seals  is  empty.   If  this  flag  is  not  set,  the initial set of seals will be
              F_SEAL_SEAL, meaning that no other seals can be set on the file.

       MFD_HUGETLB (since Linux 4.14)
              The anonymous file will be created in the hugetlbfs filesystem  using  huge  pages.
              See  the  Linux kernel source file Documentation/admin-guide/mm/hugetlbpage.rst for
              more   information   about   hugetlbfs.    Specifying    both    MFD_HUGETLB    and
              MFD_ALLOW_SEALING in flags is supported since Linux 4.16.

       MFD_HUGE_2MB
       MFD_HUGE_1GB
       ...    Used  in  conjunction  with  MFD_HUGETLB  to  select alternative hugetlb page sizes
              (respectively, 2 MB, 1 GB, ...)  on systems  that  support  multiple  hugetlb  page
              sizes.   Definitions  for  known  huge  page  sizes are included in the header file
              <linux/memfd.h>.

              For details on encoding huge page sizes not included in the header  file,  see  the
              discussion of the similarly named constants in mmap(2).

       Unused bits in flags must be 0.

       As  its  return  value,  memfd_create()  returns a new file descriptor that can be used to
       refer to the file.  This file descriptor is opened for both reading and  writing  (O_RDWR)
       and O_LARGEFILE is set for the file descriptor.

       With  respect  to fork(2) and execve(2), the usual semantics apply for the file descriptor
       created by memfd_create().  A copy of the  file  descriptor  is  inherited  by  the  child
       produced  by fork(2) and refers to the same file.  The file descriptor is preserved across
       execve(2), unless the close-on-exec flag has been set.

RETURN VALUE

       On success, memfd_create() returns a new file descriptor.  On error, -1  is  returned  and
       errno is set to indicate the error.

ERRORS

       EFAULT The address in name points to invalid memory.

       EINVAL flags included unknown bits.

       EINVAL name was too long.  (The limit is 249 bytes, excluding the terminating null byte.)

       EINVAL Both MFD_HUGETLB and MFD_ALLOW_SEALING were specified in flags.

       EMFILE The per-process limit on the number of open file descriptors has been reached.

       ENFILE The system-wide limit on the total number of open files has been reached.

       ENOMEM There was insufficient memory to create a new anonymous file.

       EPERM  The MFD_HUGETLB flag was specified, but the caller was not privileged (did not have
              the CAP_IPC_LOCK capability) and is not a member  of  the  sysctl_hugetlb_shm_group
              group; see the description of /proc/sys/vm/sysctl_hugetlb_shm_group in proc(5).

STANDARDS

       Linux.

HISTORY

       Linux 3.17, glibc 2.27.

NOTES

       The  memfd_create()  system  call  provides  a  simple  alternative to manually mounting a
       tmpfs(5) filesystem and creating and opening a  file  in  that  filesystem.   The  primary
       purpose of memfd_create() is to create files and associated file descriptors that are used
       with the file-sealing APIs provided by fcntl(2).

       The memfd_create() system call also has uses without file  sealing  (which  is  why  file-
       sealing  is  disabled,  unless  explicitly requested with the MFD_ALLOW_SEALING flag).  In
       particular, it can be used as an alternative to creating files in tmp or as an alternative
       to  using  the open(2) O_TMPFILE in cases where there is no intention to actually link the
       resulting file into the filesystem.

   File sealing
       In the absence of file sealing, processes that communicate via shared memory  must  either
       trust each other, or take measures to deal with the possibility that an untrusted peer may
       manipulate the shared memory region in problematic ways.  For example, an  untrusted  peer
       might  modify  the  contents of the shared memory at any time, or shrink the shared memory
       region.  The former possibility leaves the local process vulnerable  to  time-of-check-to-
       time-of-use  race  conditions (typically dealt with by copying data from the shared memory
       region before checking and using it).  The latter possibility  leaves  the  local  process
       vulnerable  to SIGBUS signals when an attempt is made to access a now-nonexistent location
       in the shared memory region.  (Dealing with this possibility necessitates  the  use  of  a
       handler for the SIGBUS signal.)

       Dealing  with untrusted peers imposes extra complexity on code that employs shared memory.
       Memory sealing enables that extra complexity to be eliminated, by allowing  a  process  to
       operate  secure  in  the  knowledge  that  its  peer  can't modify the shared memory in an
       undesired fashion.

       An example of the usage of the sealing mechanism is as follows:

       (1)  The first process creates a tmpfs(5) file using memfd_create().  The  call  yields  a
            file descriptor used in subsequent steps.

       (2)  The  first  process  sizes  the file created in the previous step using ftruncate(2),
            maps it using mmap(2), and populates the shared memory with the desired data.

       (3)  The first process uses the fcntl(2) F_ADD_SEALS operation to place one or more  seals
            on the file, in order to restrict further modifications on the file.  (If placing the
            seal F_SEAL_WRITE, then it will be necessary  to  first  unmap  the  shared  writable
            mapping  created  in  the previous step.  Otherwise, behavior similar to F_SEAL_WRITE
            can be achieved by using F_SEAL_FUTURE_WRITE, which will prevent  future  writes  via
            mmap(2)   and  write(2)  from  succeeding  while  keeping  existing  shared  writable
            mappings).

       (4)  A second process obtains a file descriptor for the tmpfs(5) file and maps it.   Among
            the possible ways in which this could happen are the following:

            •  The   process  that  called  memfd_create()  could  transfer  the  resulting  file
               descriptor to the second process  via  a  UNIX  domain  socket  (see  unix(7)  and
               cmsg(3)).  The second process then maps the file using mmap(2).

            •  The second process is created via fork(2) and thus automatically inherits the file
               descriptor and mapping.  (Note that in this case and the next, there is a  natural
               trust  relationship  between  the  two processes, since they are running under the
               same user ID.  Therefore, file sealing would not normally be necessary.)

            •  The second process opens the file /proc/pid/fd/fd, where <pid> is the PID  of  the
               first  process (the one that called memfd_create()), and <fd> is the number of the
               file descriptor returned by the call  to  memfd_create()  in  that  process.   The
               second process then maps the file using mmap(2).

       (5)  The  second  process uses the fcntl(2) F_GET_SEALS operation to retrieve the bit mask
            of seals that has been applied to the file.  This bit mask can be inspected in  order
            to  determine  what kinds of restrictions have been placed on file modifications.  If
            desired, the second process can apply further seals to impose additional restrictions
            (so long as the F_SEAL_SEAL seal has not yet been applied).

EXAMPLES

       Below  are  shown  two example programs that demonstrate the use of memfd_create() and the
       file sealing API.

       The first program, t_memfd_create.c, creates a tmpfs(5) file using memfd_create(), sets  a
       size for the file, maps it into memory, and optionally places some seals on the file.  The
       program accepts up to three command-line arguments, of which the first two  are  required.
       The first argument is the name to associate with the file, the second argument is the size
       to be set for the file, and the optional third argument is a  string  of  characters  that
       specify seals to be set on the file.

       The  second  program, t_get_seals.c, can be used to open an existing file that was created
       via memfd_create() and inspect the set of seals that have been applied to that file.

       The following shell session demonstrates the use of these programs.   First  we  create  a
       tmpfs(5) file and set some seals on it:

           $ ./t_memfd_create my_memfd_file 4096 sw &
           [1] 11775
           PID: 11775; fd: 3; /proc/11775/fd/3

       At  this  point,  the  t_memfd_create  program  continues  to run in the background.  From
       another program, we can obtain a file descriptor for the file created by memfd_create() by
       opening  the  /proc/pid/fd  file  that  corresponds  to  the  file  descriptor  opened  by
       memfd_create().  Using that pathname, we inspect the content of the /proc/pid/fd  symbolic
       link, and use our t_get_seals program to view the seals that have been placed on the file:

           $ readlink /proc/11775/fd/3
           /memfd:my_memfd_file (deleted)
           $ ./t_get_seals /proc/11775/fd/3
           Existing seals: WRITE SHRINK

   Program source: t_memfd_create.c

       #define _GNU_SOURCE
       #include <err.h>
       #include <fcntl.h>
       #include <stdint.h>
       #include <stdio.h>
       #include <stdlib.h>
       #include <string.h>
       #include <sys/mman.h>
       #include <sys/types.h>
       #include <unistd.h>

       int
       main(int argc, char *argv[])
       {
           int           fd;
           char          *name, *seals_arg;
           ssize_t       len;
           unsigned int  seals;

           if (argc < 3) {
               fprintf(stderr, "%s name size [seals]\n", argv[0]);
               fprintf(stderr, "\t'seals' can contain any of the "
                       "following characters:\n");
               fprintf(stderr, "\t\tg - F_SEAL_GROW\n");
               fprintf(stderr, "\t\ts - F_SEAL_SHRINK\n");
               fprintf(stderr, "\t\tw - F_SEAL_WRITE\n");
               fprintf(stderr, "\t\tW - F_SEAL_FUTURE_WRITE\n");
               fprintf(stderr, "\t\tS - F_SEAL_SEAL\n");
               exit(EXIT_FAILURE);
           }

           name = argv[1];
           len = atoi(argv[2]);
           seals_arg = argv[3];

           /* Create an anonymous file in tmpfs; allow seals to be
              placed on the file. */

           fd = memfd_create(name, MFD_ALLOW_SEALING);
           if (fd == -1)
               err(EXIT_FAILURE, "memfd_create");

           /* Size the file as specified on the command line. */

           if (ftruncate(fd, len) == -1)
               err(EXIT_FAILURE, "truncate");

           printf("PID: %jd; fd: %d; /proc/%jd/fd/%d\n",
                  (intmax_t) getpid(), fd, (intmax_t) getpid(), fd);

           /* Code to map the file and populate the mapping with data
              omitted. */

           /* If a 'seals' command-line argument was supplied, set some
              seals on the file. */

           if (seals_arg != NULL) {
               seals = 0;

               if (strchr(seals_arg, 'g') != NULL)
                   seals |= F_SEAL_GROW;
               if (strchr(seals_arg, 's') != NULL)
                   seals |= F_SEAL_SHRINK;
               if (strchr(seals_arg, 'w') != NULL)
                   seals |= F_SEAL_WRITE;
               if (strchr(seals_arg, 'W') != NULL)
                   seals |= F_SEAL_FUTURE_WRITE;
               if (strchr(seals_arg, 'S') != NULL)
                   seals |= F_SEAL_SEAL;

               if (fcntl(fd, F_ADD_SEALS, seals) == -1)
                   err(EXIT_FAILURE, "fcntl");
           }

           /* Keep running, so that the file created by memfd_create()
              continues to exist. */

           pause();

           exit(EXIT_SUCCESS);
       }

   Program source: t_get_seals.c

       #define _GNU_SOURCE
       #include <err.h>
       #include <fcntl.h>
       #include <stdio.h>
       #include <stdlib.h>

       int
       main(int argc, char *argv[])
       {
           int           fd;
           unsigned int  seals;

           if (argc != 2) {
               fprintf(stderr, "%s /proc/PID/fd/FD\n", argv[0]);
               exit(EXIT_FAILURE);
           }

           fd = open(argv[1], O_RDWR);
           if (fd == -1)
               err(EXIT_FAILURE, "open");

           seals = fcntl(fd, F_GET_SEALS);
           if (seals == -1)
               err(EXIT_FAILURE, "fcntl");

           printf("Existing seals:");
           if (seals & F_SEAL_SEAL)
               printf(" SEAL");
           if (seals & F_SEAL_GROW)
               printf(" GROW");
           if (seals & F_SEAL_WRITE)
               printf(" WRITE");
           if (seals & F_SEAL_FUTURE_WRITE)
               printf(" FUTURE_WRITE");
           if (seals & F_SEAL_SHRINK)
               printf(" SHRINK");
           printf("\n");

           /* Code to map the file and access the contents of the
              resulting mapping omitted. */

           exit(EXIT_SUCCESS);
       }

SEE ALSO

       fcntl(2), ftruncate(2), memfd_secret(2), mmap(2), shmget(2), shm_open(3)