Provided by: apt_2.9.8_amd64 
NAME
apt_preferences - Preference control file for APT
DESCRIPTION
The APT preferences file /etc/apt/preferences and the fragment files in the
/etc/apt/preferences.d/ folder can be used to control which versions of packages will be
selected for installation.
Several versions of a package may be available for installation when the sources.list(5)
file contains references to more than one distribution (for example, stable and testing).
APT assigns a priority to each version that is available. Subject to dependency
constraints, apt-get selects the version with the highest priority for installation. The
APT preferences override the priorities that APT assigns to package versions by default,
thus giving the user control over which one is selected for installation.
Several instances of the same version of a package may be available when the
sources.list(5) file contains references to more than one source. In this case apt-get
downloads the instance listed earliest in the sources.list(5) file. The APT preferences do
not affect the choice of instance, only the choice of version.
Preferences are a strong power in the hands of a system administrator but they can become
also their biggest nightmare if used without care! APT will not question the preferences,
so wrong settings can lead to uninstallable packages or wrong decisions while upgrading
packages. Even more problems will arise if multiple distribution releases are mixed
without a good understanding of the following paragraphs. Packages included in a specific
release aren't tested in (and therefore don't always work as expected in) older or newer
releases, or together with other packages from different releases. You have been warned.
Note that the files in the /etc/apt/preferences.d directory are parsed in alphanumeric
ascending order and need to obey the following naming convention: The files have either no
or "pref" as filename extension and only contain alphanumeric, hyphen (-), underscore (_)
and period (.) characters. Otherwise APT will print a notice that it has ignored a file,
unless that file matches a pattern in the Dir::Ignore-Files-Silently configuration list -
in which case it will be silently ignored.
APT's Default Priority Assignments
If there is no preferences file or if there is no entry in the file that applies to a
particular version then the priority assigned to that version is the priority of the
distribution to which that version belongs. It is possible to single out a distribution,
"the target release", which receives a higher priority than other distributions do by
default. The target release can be set on the apt-get command line or in the APT
configuration file /etc/apt/apt.conf. Note that this has precedence over any general
priority you set in the /etc/apt/preferences file described later, but not over
specifically pinned packages. For example,
apt-get install -t testing some-package
APT::Default-Release "stable";
If the target release has been specified then APT uses the following algorithm to set the
priorities of the versions of a package. Assign:
priority 1
to the versions coming from archives which in their Release files are marked as
"NotAutomatic: yes" but not as "ButAutomaticUpgrades: yes" like the Debian
experimental archive, as well as versions that are not phased on this systems.
priority 100
to the version that is already installed (if any) and to the versions coming from
archives which in their Release files are marked as "NotAutomatic: yes" and
"ButAutomaticUpgrades: yes" like the Debian backports archive since squeeze-backports.
priority 500
to the versions that do not belong to the target release.
priority 990
to the versions that belong to the target release.
The highest of those priorities whose description matches the version is assigned to the
version.
If the target release has not been specified then APT simply assigns priority 100 to all
installed package versions and priority 500 to all uninstalled package versions, except
versions coming from archives which in their Release files are marked as "NotAutomatic:
yes" - these versions get the priority 1 or priority 100 if it is additionally marked as
"ButAutomaticUpgrades: yes".
APT then applies the following rules, listed in order of precedence, to determine which
version of a package to install.
• Never downgrade unless the priority of an available version exceeds 1000.
("Downgrading" is installing a less recent version of a package in place of a more
recent version. Note that none of APT's default priorities exceeds 1000; such high
priorities can only be set in the preferences file. Note also that downgrading a
package can be risky.)
• Install the highest priority version.
• If two or more versions have the same priority, install the most recent one (that is,
the one with the higher version number).
• If two or more versions have the same priority and version number but either the
packages differ in some of their metadata or the --reinstall option is given, install
the uninstalled one.
In a typical situation, the installed version of a package (priority 100) is not as recent
as one of the versions available from the sources listed in the sources.list(5) file
(priority 500 or 990). Then the package will be upgraded when apt-get install some-package
or apt-get upgrade is executed.
More rarely, the installed version of a package is more recent than any of the other
available versions. The package will not be downgraded when apt-get install some-package
or apt-get upgrade is executed.
Sometimes the installed version of a package is more recent than the version belonging to
the target release, but not as recent as a version belonging to some other distribution.
Such a package will indeed be upgraded when apt-get install some-package or apt-get
upgrade is executed, because at least one of the available versions has a higher priority
than the installed version.
Phased Updates
APT understands a field called Phased-Update-Percentage which can be used to control the
rollout of a new version. It is an integer between 0 and 100.
A system's eligibility to a phased update is determined by seeding random number generator
with the package source name, the version number, and /etc/machine-id, and then
calculating an integer in the range [0, 100]. If this integer is larger than the
Phased-Update-Percentage, the version is pinned to 1, and thus held back. Otherwise,
normal policy rules apply.
In case you have multiple systems that you want to receive the same set of updates, you
can set APT::Machine-ID to a UUID such that they all phase the same, or set
APT::Get::Never-Include-Phased-Updates or APT::Get::Always-Include-Phased-Updates to true
such that APT will never/always consider phased updates.
The Effect of APT Preferences
The APT preferences file allows the system administrator to control the assignment of
priorities. The file consists of one or more multi-line records separated by blank lines.
Records can have one of two forms, a specific form and a general form.
• The specific form assigns a priority (a "Pin-Priority") to one or more specified
packages with a specified version or version range. For example, the following record
assigns a high priority to all versions of the perl package whose version number
begins with "5.32". Multiple packages can be separated by spaces.
Package: perl
Pin: version 5.32*
Pin-Priority: 1001
• The general form assigns a priority to all of the package versions in a given
distribution (that is, to all the versions of packages that are listed in a certain
Release file) or to all of the package versions coming from a particular Internet
site, as identified by the site's fully qualified domain name.
This general-form entry in the APT preferences file applies only to groups of
packages. For example, the following record assigns a high priority to all package
versions available from the local site.
Package: *
Pin: origin ""
Pin-Priority: 999
A note of caution: the keyword used here is "origin" which can be used to match a
hostname. The following record will assign a high priority to all versions available
from the server identified by the hostname "ftp.de.debian.org"
Package: *
Pin: origin "ftp.de.debian.org"
Pin-Priority: 999
This should not be confused with the Origin of a distribution as specified in a
Release file. What follows the "Origin:" tag in a Release file is not an Internet
address but an author or vendor name, such as "Debian" or "Ximian".
The following record assigns a low priority to all package versions belonging to any
distribution whose Archive name is "unstable".
Package: *
Pin: release a=unstable
Pin-Priority: 50
The following record assigns a high priority to all package versions belonging to any
distribution whose Codename is "trixie".
Package: *
Pin: release n=trixie
Pin-Priority: 900
The following record assigns a high priority to all package versions belonging to any
release whose Archive name is "stable" and whose release Version number is "12".
Package: *
Pin: release a=stable, v=12
Pin-Priority: 500
The effect of the comma operator is similar to an "and" in logic: All conditions must be
satisfied for the pin to match. There is one exception: For any type of condition (such as
two "a" conditions), only the last such condition is checked.
Matching packages in the Package field
The Package field specifies the package that a pinning priority is applied to. The field
can either contain a binary package name, a source package name (prefixed with "src:"), a
glob(7) expression or a regular expression (surrounded by slashes). Multiple package
names, glob(7) expressions and regular expressions can be listed separated by whitespace
in which case the record will match any of the matched packages.
By default, only packages of the native architecture are matched. To match binary packages
of any architecture, add the :any suffix to the package name. You can also limit matching
to a specific architecture by appending the architecture name to the package name,
separated by a colon character.
For example, the following example uses a glob expression and a regular expression to
assign the priority 500 to all packages from experimental where the name starts with gnome
(as a glob(7)-like expression) or contains the word kde (as a POSIX extended regular
expression surrounded by slashes).
Package: gnome* /kde/
Pin: release a=experimental
Pin-Priority: 500
The rule for those expressions is that they can occur anywhere where a string can occur.
Thus, the following pin assigns the priority 990 to all packages from a release starting
with lunar.
Package: *
Pin: release n=lunar*
Pin-Priority: 990
If a regular expression occurs in a Package field, the behavior is the same as if this
regular expression were replaced with a list of all package names it matches. It is
undecided whether this will change in the future; thus you should always list wild-card
pins first, so later specific pins override it. The pattern "*" in a Package field is not
considered a glob(7) expression in itself.
To pin all binaries produced by the apt source package of this APT's version to 990, you
can do:
Package: src:apt
Pin: version 2.9.8
Pin-Priority: 990
Source package pinning can be combined with regular expressions and glob patterns, and can
also take a binary architecture.
For example, let's pin all binaries for all architectures produced by any source package
containing apt in its name to 990:
Package: src:*apt*:any
Pin: version *
Pin-Priority: 990
The :any suffix makes sure to select binary packages from any architecture. Without that
suffix, apt implicitly assumes the :native suffix which would only select packages from
the native architecture.
How APT Interprets Priorities
Priorities (P) assigned in the APT preferences file must be positive or negative integers.
They are interpreted as follows (roughly speaking):
P >= 1000
causes a version to be installed even if this constitutes a downgrade of the package
990 <= P < 1000
causes a version to be installed even if it does not come from the target release,
unless the installed version is more recent
500 <= P < 990
causes a version to be installed unless there is a version available belonging to the
target release or the installed version is more recent
100 <= P < 500
causes a version to be installed unless there is a version available belonging to some
other distribution or the installed version is more recent
0 < P < 100
causes a version to be installed only if there is no installed version of the package
P < 0
prevents the version from being installed
P = 0
has undefined behaviour, do not use it.
The first specific-form record matching an available package version determines the
priority of the package version. Failing that, the priority of the package is defined as
the maximum of all priorities defined by generic-form records matching the version.
Records defined using patterns in the Pin field other than "*" are treated like
specific-form records.
For example, suppose the APT preferences file contains the three records presented
earlier:
Package: perl
Pin: version 5.32*
Pin-Priority: 1001
Package: *
Pin: origin ""
Pin-Priority: 999
Package: *
Pin: release unstable
Pin-Priority: 50
Then:
• The most recent available version of the perl package will be installed, so long as
that version's version number begins with "5.32". If any 5.32* version of perl is
available and the installed version is 5.36*, then perl will be downgraded.
• A version of any package other than perl that is available from the local system has
priority over other versions, even versions belonging to the target release.
• A version of a package whose origin is not the local system but some other site listed
in sources.list(5) and which belongs to an unstable distribution is only installed if
it is selected for installation and no version of the package is already installed.
Determination of Package Version and Distribution Properties
The locations listed in the sources.list(5) file should provide Packages and Release files
to describe the packages available at that location.
The Packages file is normally found in the directory .../dists/dist-name/component/arch:
for example, .../dists/stable/main/binary-i386/Packages. It consists of a series of
multi-line records, one for each package available in that directory. Only two lines in
each record are relevant for setting APT priorities:
the Package: line
gives the package name
the Version: line
gives the version number for the named package
The Release file is normally found in the directory .../dists/dist-name: for example,
.../dists/stable/Release, or .../dists/bookworm/Release. It consists of a single
multi-line record which applies to all of the packages in the directory tree below its
parent. Unlike the Packages file, nearly all of the lines in a Release file are relevant
for setting APT priorities:
the Archive: or Suite: line
names the archive to which all the packages in the directory tree belong. For example,
the line "Archive: stable" or "Suite: stable" specifies that all of the packages in
the directory tree below the parent of the Release file are in a stable archive.
Specifying this value in the APT preferences file would require the line:
Pin: release a=stable
the Codename: line
names the codename to which all the packages in the directory tree belong. For
example, the line "Codename: trixie" specifies that all of the packages in the
directory tree below the parent of the Release file belong to a version named trixie.
Specifying this value in the APT preferences file would require the line:
Pin: release n=trixie
the Version: line
names the release version. For example, the packages in the tree might belong to
Debian release version 12. Note that there is normally no version number for the
testing and unstable distributions because they have not been released yet. Specifying
this in the APT preferences file would require one of the following lines.
Pin: release v=12
Pin: release a=stable, v=12
Pin: release 12
the Component: line
names the licensing component associated with the packages in the directory tree of
the Release file. For example, the line "Component: main" specifies that all the
packages in the directory tree are from the main component, which entails that they
are licensed under terms listed in the Debian Free Software Guidelines. Specifying
this component in the APT preferences file would require the line:
Pin: release c=main
the Origin: line
names the originator of the packages in the directory tree of the Release file. Most
commonly, this is Debian. Specifying this origin in the APT preferences file would
require the line:
Pin: release o=Debian
the Label: line
names the label of the packages in the directory tree of the Release file. Most
commonly, this is Debian. Specifying this label in the APT preferences file would
require the line:
Pin: release l=Debian
All of the Packages and Release files retrieved from locations listed in the
sources.list(5) file are stored in the directory /var/lib/apt/lists, or in the file named
by the variable Dir::State::Lists in the apt.conf file. For example, the file
debian.lcs.mit.edu_debian_dists_unstable_contrib_binary-i386_Release contains the Release
file retrieved from the site debian.lcs.mit.edu for binary-i386 architecture files from
the contrib component of the unstable distribution.
Optional Lines in an APT Preferences Record
Each record in the APT preferences file can optionally begin with one or more lines
beginning with the word Explanation:. This provides a place for comments.
EXAMPLES
Tracking Stable
The following APT preferences file will cause APT to assign a priority higher than the
default (500) to all package versions belonging to a stable distribution and a
prohibitively low priority to package versions belonging to other Debian distributions.
Explanation: Uninstall or do not install any Debian-originated
Explanation: package versions other than those in the stable distro
Package: *
Pin: release a=stable
Pin-Priority: 900
Package: *
Pin: release o=Debian
Pin-Priority: -10
With a suitable sources.list(5) file and the above preferences file, any of the following
commands will cause APT to upgrade to the latest stable version(s).
apt-get install package-name
apt-get upgrade
apt-get dist-upgrade
The following command will cause APT to upgrade the specified package to the latest
version from the testing distribution; the package will not be upgraded again unless this
command is given again.
apt-get install package/testing
Tracking Testing or Unstable
The following APT preferences file will cause APT to assign a high priority to package
versions from the testing distribution, a lower priority to package versions from the
unstable distribution, and a prohibitively low priority to package versions from other
Debian distributions.
Package: *
Pin: release a=testing
Pin-Priority: 900
Package: *
Pin: release a=unstable
Pin-Priority: 800
Package: *
Pin: release o=Debian
Pin-Priority: -10
With a suitable sources.list(5) file and the above preferences file, any of the following
commands will cause APT to upgrade to the latest testing version(s).
apt-get install package-name
apt-get upgrade
apt-get dist-upgrade
The following command will cause APT to upgrade the specified package to the latest
version from the unstable distribution. Thereafter, apt-get upgrade will upgrade the
package to the most recent testing version if that is more recent than the installed
version, otherwise, to the most recent unstable version if that is more recent than the
installed version.
apt-get install package/unstable
Tracking the evolution of a codename release
The following APT preferences file will cause APT to assign a priority higher than the
default (500) to all package versions belonging to a specified codename of a distribution
and a prohibitively low priority to package versions belonging to other Debian
distributions, codenames and archives. Note that with this APT preference APT will follow
the migration of a release from the archive testing to stable and later oldstable. If you
want to follow for example the progress in testing notwithstanding the codename changes
you should use the example configurations above.
Explanation: Uninstall or do not install any Debian-originated package versions
Explanation: other than those in the distribution codenamed with trixie or sid
Package: *
Pin: release n=trixie
Pin-Priority: 900
Explanation: Debian unstable is always codenamed with sid
Package: *
Pin: release n=sid
Pin-Priority: 800
Package: *
Pin: release o=Debian
Pin-Priority: -10
With a suitable sources.list(5) file and the above preferences file, any of the following
commands will cause APT to upgrade to the latest version(s) in the release codenamed with
trixie.
apt-get install package-name
apt-get upgrade
apt-get dist-upgrade
The following command will cause APT to upgrade the specified package to the latest
version from the sid distribution. Thereafter, apt-get upgrade will upgrade the package to
the most recent trixie version if that is more recent than the installed version,
otherwise, to the most recent sid version if that is more recent than the installed
version.
apt-get install package/sid
FILES
/etc/apt/preferences
Version preferences file. This is where you would specify "pinning", i.e. a preference
to get certain packages from a separate source or from a different version of a
distribution. Configuration Item: Dir::Etc::Preferences.
/etc/apt/preferences.d/
File fragments for the version preferences. Configuration Item:
Dir::Etc::PreferencesParts.
SEE ALSO
apt-get(8) apt-cache(8) apt.conf(5) sources.list(5)
BUGS
APT bug page[1]. If you wish to report a bug in APT, please see
/usr/share/doc/debian/bug-reporting.txt or the reportbug(1) command.
AUTHOR
APT team
NOTES
1. APT bug page
https://bugs.debian.org/src:apt