Provided by: systemd_256.5-2ubuntu3_amd64 bug

NAME

       logind.conf, logind.conf.d - Login manager configuration files

SYNOPSIS

           /etc/systemd/logind.conf
           /run/systemd/logind.conf
           /usr/local/lib/systemd/logind.conf
           /usr/lib/systemd/logind.conf
           /etc/systemd/logind.conf.d/*.conf
           /run/systemd/logind.conf.d/*.conf
           /usr/local/lib/systemd/logind.conf.d/*.conf
           /usr/lib/systemd/logind.conf.d/*.conf

DESCRIPTION

       These files configure various parameters of the systemd login manager, systemd-
       logind.service(8). See systemd.syntax(7) for a general description of the syntax.

CONFIGURATION DIRECTORIES AND PRECEDENCE

       The default configuration is set during compilation, so configuration is only needed when
       it is necessary to deviate from those defaults. The main configuration file is loaded from
       one of the listed directories in order of priority, only the first file found is used:
       /etc/systemd/, /run/systemd/, /usr/local/lib/systemd/ [1], /usr/lib/systemd/. The vendor
       version of the file contains commented out entries showing the defaults as a guide to the
       administrator. Local overrides can also be created by creating drop-ins, as described
       below. The main configuration file can also be edited for this purpose (or a copy in /etc/
       if it's shipped under /usr/), however using drop-ins for local configuration is
       recommended over modifications to the main configuration file.

       In addition to the main configuration file, drop-in configuration snippets are read from
       /usr/lib/systemd/*.conf.d/, /usr/local/lib/systemd/*.conf.d/, and /etc/systemd/*.conf.d/.
       Those drop-ins have higher precedence and override the main configuration file. Files in
       the *.conf.d/ configuration subdirectories are sorted by their filename in lexicographic
       order, regardless of in which of the subdirectories they reside. When multiple files
       specify the same option, for options which accept just a single value, the entry in the
       file sorted last takes precedence, and for options which accept a list of values, entries
       are collected as they occur in the sorted files.

       When packages need to customize the configuration, they can install drop-ins under /usr/.
       Files in /etc/ are reserved for the local administrator, who may use this logic to
       override the configuration files installed by vendor packages. Drop-ins have to be used to
       override package drop-ins, since the main configuration file has lower precedence. It is
       recommended to prefix all filenames in those subdirectories with a two-digit number and a
       dash, to simplify the ordering. This also defines a concept of drop-in priorities to allow
       OS vendors to ship drop-ins within a specific range lower than the range used by users.
       This should lower the risk of package drop-ins overriding accidentally drop-ins defined by
       users. It is recommended to use the range 10-40 for drop-ins in /usr/ and the range 60-90
       for drop-ins in /etc/ and /run/, to make sure that local and transient drop-ins take
       priority over drop-ins shipped by the OS vendor.

       To disable a configuration file supplied by the vendor, the recommended way is to place a
       symlink to /dev/null in the configuration directory in /etc/, with the same filename as
       the vendor configuration file.

OPTIONS

       All options are configured in the [Login] section:

       NAutoVTs=
           Takes a positive integer. Configures how many virtual terminals (VTs) to allocate by
           default that, when switched to and are previously unused, "autovt" services are
           automatically spawned on. These services are instantiated from the template unit
           autovt@.service for the respective VT TTY name, for example, autovt@tty4.service. By
           default, autovt@.service is linked to getty@.service. In other words, login prompts
           are started dynamically as the user switches to unused virtual terminals. Hence, this
           parameter controls how many login "gettys" are available on the VTs. If a VT is
           already used by some other subsystem (for example, a graphical login), this kind of
           activation will not be attempted. Note that the VT configured in ReserveVT= is always
           subject to this kind of activation, even if it is not one of the VTs configured with
           the NAutoVTs= directive. Defaults to 6. When set to 0, automatic spawning of "autovt"
           services is disabled.

       ReserveVT=
           Takes a positive integer. Identifies one virtual terminal that shall unconditionally
           be reserved for autovt@.service activation (see above). The VT selected with this
           option will be marked busy unconditionally, so that no other subsystem will allocate
           it. This functionality is useful to ensure that, regardless of how many VTs are
           allocated by other subsystems, one login "getty" is always available. Defaults to 6
           (in other words, there will always be a "getty" available on Alt-F6.). When set to 0,
           VT reservation is disabled.

           Added in version 190.

       KillUserProcesses=
           Takes a boolean argument. Configures whether the processes of a user should be killed
           when the user logs out. If true, the scope unit corresponding to the session and all
           processes inside that scope will be terminated. If false, the scope is "abandoned",
           see systemd.scope(5), and processes are not killed. Defaults to "no", but see the
           options KillOnlyUsers= and KillExcludeUsers= below.

           In addition to session processes, user process may run under the user manager unit
           user@.service. Depending on the linger settings, this may allow users to run processes
           independent of their login sessions. See the description of enable-linger in
           loginctl(1).

           Note that setting KillUserProcesses=yes will break tools like screen(1) and tmux(1),
           unless they are moved out of the session scope. See example in systemd-run(1).

       KillOnlyUsers=, KillExcludeUsers=
           These settings take space-separated lists of usernames that override the
           KillUserProcesses= setting. A user name may be added to KillExcludeUsers= to exclude
           the processes in the session scopes of that user from being killed even if
           KillUserProcesses=yes is set. If KillExcludeUsers= is not set, the "root" user is
           excluded by default.  KillExcludeUsers= may be set to an empty value to override this
           default. If a user is not excluded, KillOnlyUsers= is checked next. If this setting is
           specified, only the processes in the session scopes of those users will be killed.
           Otherwise, users are subject to the KillUserProcesses=yes setting.

       IdleAction=
           Configures the action to take when the system is idle. Takes one of "ignore",
           "poweroff", "reboot", "halt", "kexec", "suspend", "hibernate", "hybrid-sleep",
           "suspend-then-hibernate", "sleep", and "lock". Defaults to "ignore".

           Note that this requires that user sessions correctly report the idle status to the
           system. The system will execute the action after all sessions report that they are
           idle, no idle inhibitor lock is active, and subsequently, the time configured with
           IdleActionSec= (see below) has expired.

           Added in version 198.

       IdleActionSec=
           Configures the delay after which the action configured in IdleAction= (see above) is
           taken after the system is idle.

           Added in version 198.

       InhibitDelayMaxSec=
           Specifies the maximum time a system shutdown or sleep request is delayed due to an
           inhibitor lock of type "delay" being active before the inhibitor is ignored and the
           operation executes anyway. Defaults to 5.

       UserStopDelaySec=
           Specifies how long to keep the user record and per-user service user@.service around
           for a user after they logged out fully. If set to zero, the per-user service is
           terminated immediately when the last session of the user has ended. If this option is
           configured to non-zero rapid logout/login cycles are sped up, as the user's service
           manager is not constantly restarted. If set to "infinity" the per-user service for a
           user is never terminated again after first login, and continues to run until system
           shutdown. Defaults to 10s.

           Added in version 240.

       SleepOperation=
           Takes a list of sleep operations. Possible values are "suspend", "hibernate",
           "hybrid-sleep", and "suspend-then-hibernate". Controls the candidate sleep operations
           for the "sleep" action. When "sleep" action is performed, the specified sleep
           operations are checked in a fixed order ("suspend-then-hibernate" โ†’ "hybrid-sleep" โ†’
           "suspend" โ†’ "hibernate"), and the first one supported by the machine is used to put
           the system into sleep. Defaults to "suspend-then-hibernate suspend hibernate".

           Added in version 256.

       HandlePowerKey=, HandlePowerKeyLongPress=, HandleRebootKey=, HandleRebootKeyLongPress=,
       HandleSuspendKey=, HandleSuspendKeyLongPress=, HandleHibernateKey=,
       HandleHibernateKeyLongPress=, HandleLidSwitch=, HandleLidSwitchExternalPower=,
       HandleLidSwitchDocked=
           Controls how logind shall handle the system power, reboot and sleep keys and the lid
           switch to trigger actions such as system power-off, reboot or suspend. Can be one of
           "ignore", "poweroff", "reboot", "halt", "kexec", "suspend", "hibernate",
           "hybrid-sleep", "suspend-then-hibernate", "sleep", "lock", and "factory-reset". If
           "ignore", systemd-logind will never handle these keys. If "lock", all running sessions
           will be screen-locked; otherwise, the specified action will be taken in the respective
           event. Only input devices with the "power-switch" udev tag will be watched for key/lid
           switch events.

           HandlePowerKey= defaults to "poweroff", HandleRebootKey= defaults to "reboot",
           HandleSuspendKey= defaults to "suspend", HandleHibernateKey= defaults to "hibernate",
           HandlePowerKeyLongPress= defaults to "ignore", HandleRebootKeyLongPress= defaults to
           "poweroff", HandleSuspendKeyLongPress= defaults to "hibernate",
           HandleHibernateKeyLongPress= defaults to "ignore".  HandleLidSwitch= defaults to
           "suspend".  HandleLidSwitchExternalPower= is completely ignored by default (for
           backwards compatibility) โ€” an explicit value must be set before it will be used to
           determine behaviour.  HandleLidSwitchDocked= defaults to "ignore". If the system is
           inserted in a docking station, or if more than one display is connected, the action
           specified by HandleLidSwitchDocked= occurs; if the system is on external power the
           action (if any) specified by HandleLidSwitchExternalPower= occurs; otherwise the
           HandleLidSwitch= action occurs.

           A different application may disable logind's handling of system power and sleep keys
           and the lid switch by taking a low-level inhibitor lock ("handle-power-key",
           "handle-suspend-key", "handle-hibernate-key", "handle-lid-switch",
           "handle-reboot-key"). This is most commonly used by graphical desktop environments to
           take over suspend and hibernation handling, and to use their own configuration
           mechanisms. If a low-level inhibitor lock is taken, logind will not take any action
           when that key or switch is triggered and the Handle*= settings are irrelevant.

           Added in version 184.

       PowerKeyIgnoreInhibited=, SuspendKeyIgnoreInhibited=, HibernateKeyIgnoreInhibited=,
       LidSwitchIgnoreInhibited=, RebootKeyIgnoreInhibited=
           Controls whether actions that systemd-logind takes when the power, reboot and sleep
           keys and the lid switch are triggered are subject to high-level inhibitor locks
           ("shutdown", "reboot", "sleep", "idle"). Low level inhibitor locks
           ("handle-power-key", "handle-suspend-key", "handle-hibernate-key",
           "handle-lid-switch", "handle-reboot-key"), are always honored, irrespective of this
           setting.

           These settings take boolean arguments. If "no", the inhibitor locks taken by
           applications are respected. If "yes", "shutdown", "reboot" "sleep", and "idle"
           inhibitor locks are ignored.  PowerKeyIgnoreInhibited=, SuspendKeyIgnoreInhibited=,
           HibernateKeyIgnoreInhibited= and RebootKeyIgnoreInhibited= default to "no".
           LidSwitchIgnoreInhibited= defaults to "yes". This means that when systemd-logind is
           handling events by itself (no low level inhibitor locks are taken by another
           application), the lid switch does not respect suspend blockers by default, but the
           power and sleep keys do.

           Added in version 190.

       HoldoffTimeoutSec=
           Specifies a period of time after system startup or system resume in which systemd will
           hold off on reacting to lid events. This is required for the system to properly detect
           any hotplugged devices so systemd can ignore lid events if external monitors, or
           docks, are connected. If set to 0, systemd will always react immediately, possibly
           before the kernel fully probed all hotplugged devices. This is safe, as long as you do
           not care for systemd to account for devices that have been plugged or unplugged while
           the system was off. Defaults to 30s.

           Added in version 220.

       RuntimeDirectorySize=
           Sets the size limit on the $XDG_RUNTIME_DIR runtime directory for each user who logs
           in. Takes a size in bytes, optionally suffixed with the usual K, G, M, and T suffixes,
           to the base 1024 (IEC). Alternatively, a numerical percentage suffixed by "%" may be
           specified, which sets the size limit relative to the amount of physical RAM. Defaults
           to 10%. Note that this size is a safety limit only. As each runtime directory is a
           tmpfs file system, it will only consume as much memory as is needed.

           Added in version 211.

       RuntimeDirectoryInodesMax=
           Sets the limit on number of inodes for the $XDG_RUNTIME_DIR runtime directory for each
           user who logs in. Takes a number, optionally suffixed with the usual K, G, M, and T
           suffixes, to the base 1024 (IEC). Defaults to RuntimeDirectorySize= divided by 4096.
           Note that this size is a safety limit only. As each runtime directory is a tmpfs file
           system, it will only consume as much memory as is needed.

           Added in version 246.

       InhibitorsMax=
           Controls the maximum number of concurrent inhibitors to permit. Defaults to 8192 (8K).

           Added in version 230.

       SessionsMax=
           Controls the maximum number of concurrent user sessions to manage. Defaults to 8192
           (8K). Depending on how the pam_systemd.so module is included in the PAM stack
           configuration, further login sessions will either be refused, or permitted but not
           tracked by systemd-logind.

           Added in version 230.

       RemoveIPC=
           Controls whether System V and POSIX IPC objects belonging to the user shall be removed
           when the user fully logs out. Takes a boolean argument. If enabled, the user may not
           consume IPC resources after the last of the user's sessions terminated. This covers
           System V semaphores, shared memory and message queues, as well as POSIX shared memory
           and message queues. Note that IPC objects of the root user and other system users are
           excluded from the effect of this setting. Defaults to "yes".

           Added in version 212.

       StopIdleSessionSec=
           Specifies a timeout in seconds, or a time span value after which systemd-logind checks
           the idle state of all sessions. Every session that is idle for longer than the timeout
           will be stopped. Note that this option doesn't apply to "greeter" or "lock-screen"
           sessions. Defaults to "infinity" (systemd-logind is not checking the idle state of
           sessions). For details about the syntax of time spans, see systemd.time(7).

           Added in version 252.

SEE ALSO

       systemd(1), systemd-logind.service(8), loginctl(1), systemd-system.conf(5)

NOTES

        1. ๐Ÿ’ฃ๐Ÿ’ฅ๐Ÿงจ๐Ÿ’ฅ๐Ÿ’ฅ๐Ÿ’ฃ Please note that those configuration files must be available at all times.
           If /usr/local/ is a separate partition, it may not be available during early boot, and
           must not be used for configuration.