Provided by: iproute2_6.10.0-2ubuntu1_amd64 
NAME
tc - show / manipulate traffic control settings
SYNOPSIS
tc [ OPTIONS ] qdisc [ add | change | replace | link | delete ] dev DEV [ parent qdisc-id | root ] [
handle qdisc-id ] [ ingress_block BLOCK_INDEX ] [ egress_block BLOCK_INDEX ] qdisc [ qdisc specific
parameters ]
tc [ OPTIONS ] class [ add | change | replace | delete | show ] dev DEV parent qdisc-id [ classid class-
id ] qdisc [ qdisc specific parameters ]
tc [ OPTIONS ] filter [ add | change | replace | delete | get ] dev DEV [ parent qdisc-id | root ] [
handle filter-id ] protocol protocol prio priority filtertype [ filtertype specific parameters ] flowid
flow-id
tc [ OPTIONS ] filter [ add | change | replace | delete | get ] block BLOCK_INDEX [ handle filter-id ]
protocol protocol prio priority filtertype [ filtertype specific parameters ] flowid flow-id
tc [ OPTIONS ] chain [ add | delete | get ] dev DEV [ parent qdisc-id | root ] filtertype [ filtertype
specific parameters ]
tc [ OPTIONS ] chain [ add | delete | get ] block BLOCK_INDEX filtertype [ filtertype specific parameters
]
tc [ OPTIONS ] [ FORMAT ] qdisc { show | list } [ dev DEV ] [ root | ingress | handle QHANDLE | parent
CLASSID ] [ invisible ]
tc [ OPTIONS ] [ FORMAT ] class show dev DEV
tc [ OPTIONS ] filter show dev DEV
tc [ OPTIONS ] filter show block BLOCK_INDEX
tc [ OPTIONS ] chain show dev DEV
tc [ OPTIONS ] chain show block BLOCK_INDEX
tc [ OPTIONS ] monitor [ file FILENAME ]
OPTIONS := { [ -force ] -b[atch] [ filename ] | [ -n[etns] name ] | [ -N[umeric] ] | [ -nm | -nam[es] ]
| [ { -cf | -c[onf] } [ filename ] ] [ -t[imestamp] ] | [ -t[short] | [ -o[neline] ] | [ -echo ] }
FORMAT := { -s[tatistics] | -d[etails] | -r[aw] | -i[ec] | -g[raph] | -j[json] | -p[retty] | -col[or] }
DESCRIPTION
Tc is used to configure Traffic Control in the Linux kernel. Traffic Control consists of the following:
SHAPING
When traffic is shaped, its rate of transmission is under control. Shaping may be more than
lowering the available bandwidth - it is also used to smooth out bursts in traffic for better
network behaviour. Shaping occurs on egress.
SCHEDULING
By scheduling the transmission of packets it is possible to improve interactivity for traffic that
needs it while still guaranteeing bandwidth to bulk transfers. Reordering is also called
prioritizing, and happens only on egress.
POLICING
Whereas shaping deals with transmission of traffic, policing pertains to traffic arriving.
Policing thus occurs on ingress.
DROPPING
Traffic exceeding a set bandwidth may also be dropped forthwith, both on ingress and on egress.
Processing of traffic is controlled by three kinds of objects: qdiscs, classes and filters.
QDISCS
qdisc is short for 'queueing discipline' and it is elementary to understanding traffic control. Whenever
the kernel needs to send a packet to an interface, it is enqueued to the qdisc configured for that
interface. Immediately afterwards, the kernel tries to get as many packets as possible from the qdisc,
for giving them to the network adaptor driver.
A simple QDISC is the 'pfifo' one, which does no processing at all and is a pure First In, First Out
queue. It does however store traffic when the network interface can't handle it momentarily.
CLASSES
Some qdiscs can contain classes, which contain further qdiscs - traffic may then be enqueued in any of
the inner qdiscs, which are within the classes. When the kernel tries to dequeue a packet from such a
classful qdisc it can come from any of the classes. A qdisc may for example prioritize certain kinds of
traffic by trying to dequeue from certain classes before others.
FILTERS
A filter is used by a classful qdisc to determine in which class a packet will be enqueued. Whenever
traffic arrives at a class with subclasses, it needs to be classified. Various methods may be employed to
do so, one of these are the filters. All filters attached to the class are called, until one of them
returns with a verdict. If no verdict was made, other criteria may be available. This differs per qdisc.
It is important to notice that filters reside within qdiscs - they are not masters of what happens.
The available filters are:
basic Filter packets based on an ematch expression. See tc-ematch(8) for details.
bpf Filter packets using (e)BPF, see tc-bpf(8) for details.
cgroup Filter packets based on the control group of their process. See tc-cgroup(8) for details.
flow, flower
Flow-based classifiers, filtering packets based on their flow (identified by selectable keys). See
tc-flow(8) and tc-flower(8) for details.
fw Filter based on fwmark. Directly maps fwmark value to traffic class. See tc-fw(8).
route Filter packets based on routing table. See tc-route(8) for details.
u32 Generic filtering on arbitrary packet data, assisted by syntax to abstract common operations. See
tc-u32(8) for details.
matchall
Traffic control filter that matches every packet. See tc-matchall(8) for details.
QEVENTS
Qdiscs may invoke user-configured actions when certain interesting events take place in the qdisc. Each
qevent can either be unused, or can have a block attached to it. To this block are then attached filters
using the "tc block BLOCK_IDX" syntax. The block is executed when the qevent associated with the
attachment point takes place. For example, packet could be dropped, or delayed, etc., depending on the
qdisc and the qevent in question.
For example:
tc qdisc add dev eth0 root handle 1: red limit 500K avpkt 1K \
qevent early_drop block 10
tc filter add block 10 matchall action mirred egress mirror dev eth1
CLASSLESS QDISCS
The classless qdiscs are:
choke CHOKe (CHOose and Keep for responsive flows, CHOose and Kill for unresponsive flows) is a
classless qdisc designed to both identify and penalize flows that monopolize the queue. CHOKe is a
variation of RED, and the configuration is similar to RED.
codel CoDel (pronounced "coddle") is an adaptive "no-knobs" active queue management algorithm (AQM)
scheme that was developed to address the shortcomings of RED and its variants.
[p|b]fifo
Simplest usable qdisc, pure First In, First Out behaviour. Limited in packets or in bytes.
fq Fair Queue Scheduler realises TCP pacing and scales to millions of concurrent flows per qdisc.
fq_codel
Fair Queuing Controlled Delay is queuing discipline that combines Fair Queuing with the CoDel AQM
scheme. FQ_Codel uses a stochastic model to classify incoming packets into different flows and is
used to provide a fair share of the bandwidth to all the flows using the queue. Each such flow is
managed by the CoDel queuing discipline. Reordering within a flow is avoided since Codel
internally uses a FIFO queue.
fq_pie FQ-PIE (Flow Queuing with Proportional Integral controller Enhanced) is a queuing discipline that
combines Flow Queuing with the PIE AQM scheme. FQ-PIE uses a Jenkins hash function to classify
incoming packets into different flows and is used to provide a fair share of the bandwidth to all
the flows using the qdisc. Each such flow is managed by the PIE algorithm.
gred Generalized Random Early Detection combines multiple RED queues in order to achieve multiple drop
priorities. This is required to realize Assured Forwarding (RFC 2597).
hhf Heavy-Hitter Filter differentiates between small flows and the opposite, heavy-hitters. The goal
is to catch the heavy-hitters and move them to a separate queue with less priority so that bulk
traffic does not affect the latency of critical traffic.
ingress
This is a special qdisc as it applies to incoming traffic on an interface, allowing for it to be
filtered and policed.
mqprio The Multiqueue Priority Qdisc is a simple queuing discipline that allows mapping traffic flows to
hardware queue ranges using priorities and a configurable priority to traffic class mapping. A
traffic class in this context is a set of contiguous qdisc classes which map 1:1 to a set of
hardware exposed queues.
multiq Multiqueue is a qdisc optimized for devices with multiple Tx queues. It has been added for
hardware that wishes to avoid head-of-line blocking. It will cycle though the bands and verify
that the hardware queue associated with the band is not stopped prior to dequeuing a packet.
netem Network Emulator is an enhancement of the Linux traffic control facilities that allow one to add
delay, packet loss, duplication and more other characteristics to packets outgoing from a selected
network interface.
pfifo_fast
Standard qdisc for 'Advanced Router' enabled kernels. Consists of a three-band queue which honors
Type of Service flags, as well as the priority that may be assigned to a packet.
pie Proportional Integral controller-Enhanced (PIE) is a control theoretic active queue management
scheme. It is based on the proportional integral controller but aims to control delay.
red Random Early Detection simulates physical congestion by randomly dropping packets when nearing
configured bandwidth allocation. Well suited to very large bandwidth applications.
sfb Stochastic Fair Blue is a classless qdisc to manage congestion based on packet loss and link
utilization history while trying to prevent non-responsive flows (i.e. flows that do not react to
congestion marking or dropped packets) from impacting performance of responsive flows. Unlike
RED, where the marking probability has to be configured, BLUE tries to determine the ideal marking
probability automatically.
sfq Stochastic Fairness Queueing reorders queued traffic so each 'session' gets to send a packet in
turn.
tbf The Token Bucket Filter is suited for slowing traffic down to a precisely configured rate. Scales
well to large bandwidths.
CONFIGURING CLASSLESS QDISCS
In the absence of classful qdiscs, classless qdiscs can only be attached at the root of a device. Full
syntax:
tc qdisc add dev DEV root QDISC QDISC-PARAMETERS
To remove, issue
tc qdisc del dev DEV root
The pfifo_fast qdisc is the automatic default in the absence of a configured qdisc.
CLASSFUL QDISCS
The classful qdiscs are:
ATM Map flows to virtual circuits of an underlying asynchronous transfer mode device.
DRR The Deficit Round Robin Scheduler is a more flexible replacement for Stochastic Fairness Queuing.
Unlike SFQ, there are no built-in queues -- you need to add classes and then set up filters to
classify packets accordingly. This can be useful e.g. for using RED qdiscs with different
settings for particular traffic. There is no default class -- if a packet cannot be classified, it
is dropped.
ETS The ETS qdisc is a queuing discipline that merges functionality of PRIO and DRR qdiscs in one
scheduler. ETS makes it easy to configure a set of strict and bandwidth-sharing bands to implement
the transmission selection described in 802.1Qaz.
HFSC Hierarchical Fair Service Curve guarantees precise bandwidth and delay allocation for leaf classes
and allocates excess bandwidth fairly. Unlike HTB, it makes use of packet dropping to achieve low
delays which interactive sessions benefit from.
HTB The Hierarchy Token Bucket implements a rich linksharing hierarchy of classes with an emphasis on
conforming to existing practices. HTB facilitates guaranteeing bandwidth to classes, while also
allowing specification of upper limits to inter-class sharing. It contains shaping elements, based
on TBF and can prioritize classes.
PRIO The PRIO qdisc is a non-shaping container for a configurable number of classes which are dequeued
in order. This allows for easy prioritization of traffic, where lower classes are only able to
send if higher ones have no packets available. To facilitate configuration, Type Of Service bits
are honored by default.
QFQ Quick Fair Queueing is an O(1) scheduler that provides near-optimal guarantees, and is the first
to achieve that goal with a constant cost also with respect to the number of groups and the packet
length. The QFQ algorithm has no loops, and uses very simple instructions and data structures that
lend themselves very well to a hardware implementation.
THEORY OF OPERATION
Classes form a tree, where each class has a single parent. A class may have multiple children. Some
qdiscs allow for runtime addition of classes (HTB) while others (PRIO) are created with a static number
of children.
Qdiscs which allow dynamic addition of classes can have zero or more subclasses to which traffic may be
enqueued.
Furthermore, each class contains a leaf qdisc which by default has pfifo behaviour, although another
qdisc can be attached in place. This qdisc may again contain classes, but each class can have only one
leaf qdisc.
When a packet enters a classful qdisc it can be classified to one of the classes within. Three criteria
are available, although not all qdiscs will use all three:
tc filters
If tc filters are attached to a class, they are consulted first for relevant instructions. Filters
can match on all fields of a packet header, as well as on the firewall mark applied by iptables.
Type of Service
Some qdiscs have built in rules for classifying packets based on the TOS field.
skb->priority
Userspace programs can encode a class-id in the 'skb->priority' field using the SO_PRIORITY
option.
Each node within the tree can have its own filters but higher level filters may also point directly to
lower classes.
If classification did not succeed, packets are enqueued to the leaf qdisc attached to that class. Check
qdisc specific manpages for details, however.
NAMING
All qdiscs, classes and filters have IDs, which can either be specified or be automatically assigned.
IDs consist of a major number and a minor number, separated by a colon - major:minor. Both major and
minor are hexadecimal numbers and are limited to 16 bits. There are two special values: root is signified
by major and minor of all ones, and unspecified is all zeros.
QDISCS A qdisc, which potentially can have children, gets assigned a major number, called a 'handle',
leaving the minor number namespace available for classes. The handle is expressed as '10:'. It is
customary to explicitly assign a handle to qdiscs expected to have children.
CLASSES
Classes residing under a qdisc share their qdisc major number, but each have a separate minor
number called a 'classid' that has no relation to their parent classes, only to their parent
qdisc. The same naming custom as for qdiscs applies.
FILTERS
Filters have a three part ID, which is only needed when using a hashed filter hierarchy.
PARAMETERS
The following parameters are widely used in TC. For other parameters, see the man pages for individual
qdiscs.
RATES Bandwidths or rates. These parameters accept a floating point number, possibly followed by either
a unit (both SI and IEC units supported), or a float followed by a '%' character to specify the
rate as a percentage of the device's speed (e.g. 5%, 99.5%). Warning: specifying the rate as a
percentage means a fraction of the current speed; if the speed changes, the value will not be
recalculated.
bit or a bare number
Bits per second
kbit Kilobits per second
mbit Megabits per second
gbit Gigabits per second
tbit Terabits per second
bps Bytes per second
kbps Kilobytes per second
mbps Megabytes per second
gbps Gigabytes per second
tbps Terabytes per second
To specify in IEC units, replace the SI prefix (k-, m-, g-, t-) with IEC prefix (ki-, mi-, gi- and
ti-) respectively.
TC store rates as a 32-bit unsigned integer in bps internally, so we can specify a max rate of
4294967295 bps.
TIMES Length of time. Can be specified as a floating point number followed by an optional unit:
s, sec or secs
Whole seconds
ms, msec or msecs
Milliseconds
us, usec, usecs or a bare number
Microseconds.
TC defined its own time unit (equal to microsecond) and stores time values as 32-bit unsigned
integer, thus we can specify a max time value of 4294967295 usecs.
SIZES Amounts of data. Can be specified as a floating point number followed by an optional unit:
b or a bare number
Bytes.
kbit Kilobits
kb or k
Kilobytes
mbit Megabits
mb or m
Megabytes
gbit Gigabits
gb or g
Gigabytes
TC stores sizes internally as 32-bit unsigned integer in byte, so we can specify a max size of
4294967295 bytes.
VALUES Other values without a unit. These parameters are interpreted as decimal by default, but you can
indicate TC to interpret them as octal and hexadecimal by adding a '0' or '0x' prefix
respectively.
TC COMMANDS
The following commands are available for qdiscs, classes and filter:
add Add a qdisc, class or filter to a node. For all entities, a parent must be passed, either by
passing its ID or by attaching directly to the root of a device. When creating a qdisc or a
filter, it can be named with the handle parameter. A class is named with the classid parameter.
delete A qdisc can be deleted by specifying its handle, which may also be 'root'. All subclasses and
their leaf qdiscs are automatically deleted, as well as any filters attached to them.
change Some entities can be modified 'in place'. Shares the syntax of 'add', with the exception that the
handle cannot be changed and neither can the parent. In other words, change cannot move a node.
replace
Performs a nearly atomic remove/add on an existing node id. If the node does not exist yet it is
created.
get Displays a single filter given the interface DEV, qdisc-id, priority, protocol and filter-id.
show Displays all filters attached to the given interface. A valid parent ID must be passed.
link Only available for qdiscs and performs a replace where the node must exist already.
MONITOR
The tc utility can monitor events generated by the kernel such as adding/deleting qdiscs, filters or
actions, or modifying existing ones.
The following command is available for monitor :
file If the file option is given, the tc does not listen to kernel events, but opens the given file and
dumps its contents. The file has to be in binary format and contain netlink messages.
OPTIONS
-b, -b filename, -batch, -batch filename
read commands from provided file or standard input and invoke them. First failure will cause
termination of tc.
-force don't terminate tc on errors in batch mode. If there were any errors during execution of the
commands, the application return code will be non zero.
-o, -oneline
output each record on a single line, replacing line feeds with the '\' character. This is
convenient when you want to count records with wc(1) or to grep(1) the output.
-n, -net, -netns <NETNS>
switches tc to the specified network namespace NETNS. Actually it just simplifies executing of:
ip netns exec NETNS tc [ OPTIONS ] OBJECT { COMMAND | help }
to
tc -n[etns] NETNS [ OPTIONS ] OBJECT { COMMAND | help }
-N, -Numeric
Print the number of protocol, scope, dsfield, etc directly instead of converting it to human
readable name.
-cf, -conf <FILENAME>
specifies path to the config file. This option is used in conjunction with other options (e.g.
-nm).
-t, -timestamp
When tc monitor runs, print timestamp before the event message in format:
Timestamp: <Day> <Month> <DD> <hh:mm:ss> <YYYY> <usecs> usec
-ts, -tshort
When tc monitor runs, prints short timestamp before the event message in format:
[<YYYY>-<MM>-<DD>T<hh:mm:ss>.<ms>]
-echo Request the kernel to send the applied configuration back.
FORMAT
The show command has additional formatting options:
-s, -stats, -statistics
output more statistics about packet usage.
-d, -details
output more detailed information about rates and cell sizes.
-r, -raw
output raw hex values for handles.
-p, -pretty
for u32 filter, decode offset and mask values to equivalent filter commands based on TCP/IP. In
JSON output, add whitespace to improve readability.
-iec print rates in IEC units (ie. 1K = 1024).
-g, -graph
shows classes as ASCII graph. Prints generic stats info under each class if -s option was
specified. Classes can be filtered only by dev option.
-c[color][={always|auto|never}
Configure color output. If parameter is omitted or always, color output is enabled regardless of
stdout state. If parameter is auto, stdout is checked to be a terminal before enabling color
output. If parameter is never, color output is disabled. If specified multiple times, the last one
takes precedence. This flag is ignored if -json is also given.
-j, -json
Display results in JSON format.
-nm, -name
resolve class name from /etc/iproute2/tc_cls file or from file specified by -cf option. This file
is just a mapping of classid to class name:
# Here is comment
1:40 voip # Here is another comment
1:50 web
1:60 ftp
1:2 home
tc will not fail if -nm was specified without -cf option but /etc/iproute2/tc_cls file does not
exist, which makes it possible to pass -nm option for creating tc alias.
-br, -brief
Print only essential data needed to identify the filter and action (handle, cookie, etc.) and
stats. This option is currently only supported by tc filter show and tc actions ls commands.
EXAMPLES
tc -g class show dev eth0
Shows classes as ASCII graph on eth0 interface.
tc -g -s class show dev eth0
Shows classes as ASCII graph with stats info under each class.
HISTORY
tc was written by Alexey N. Kuznetsov and added in Linux 2.2.
SEE ALSO
tc-basic(8), tc-bfifo(8), tc-bpf(8), tc-cake(8), tc-cgroup(8), tc-choke(8), tc-codel(8), tc-drr(8), tc-
ematch(8), tc-ets(8), tc-flow(8), tc-flower(8), tc-fq(8), tc-fq_codel(8), tc-fq_pie(8), tc-fw(8), tc-
gact(8), tc-hfsc(7), tc-hfsc(8), tc-htb(8), tc-mqprio(8), tc-pfifo(8), tc-pfifo_fast(8), tc-pie(8), tc-
red(8), tc-route(8), tc-sfb(8), tc-sfq(8), tc-stab(8), tc-tbf(8), tc-u32(8)
User documentation at http://lartc.org/, but please direct bugreports and patches to:
<netdev@vger.kernel.org>
AUTHOR
Manpage maintained by bert hubert (ahu@ds9a.nl)