Provided by: calibre_7.16.0+ds-3_all bug

NAME

       ebook-convert - ebook-convert

          ebook-convert input_file output_file [options]

       Convert an e-book from one format to another.

       input_file  is the input and output_file is the output. Both must be specified as the first two arguments
       to the command.

       The output e-book format is guessed from the file extension of output_file. output_file can  also  be  of
       the special format .EXT where EXT is the output file extension. In this case, the name of the output file
       is derived from the name of the input file. Note that  the  filenames  must  not  start  with  a  hyphen.
       Finally,  if  output_file  has  no  extension,  then it is treated as a folder and an "open e-book" (OEB)
       consisting of HTML files is written to that folder. These files are the files that  would  normally  have
       been passed to the output plugin.

       After  specifying  the  input  and  output  file  you  can customize the conversion by specifying various
       options. The available options depend on the input and output file types. To get help on them specify the
       input and output file and then use the -h option.

       For full documentation of the conversion system see E-book conversion

       Whenever you pass arguments to ebook-convert that have spaces in them, enclose the arguments in quotation
       marks. For example: "/some path/with spaces"

       The options and default values for the options change depending on both the input and output formats,  so
       you should always check with:

          ebook-convert myfile.input_format myfile.output_format -h

       Below  are the options that are common to all conversion, followed by the options specific to every input
       and output format.

       • VALG FOR INNDATAVALG FOR UTDATAUTSEENDE OG FØLELSEHEURISTIC PROCESSINGSØK OG ERSTATTSTRUCTURE DETECTIONINNHOLDSFORTEGNELSEMETADATAFEILSØK

       --help, -h
              show this help message and exit

       --input-profile
              Spesifiser inndataprofilen. Inndataprofilen gir konverteringssystemet informasjon om hvordan tolke
              den  varierende  informasjonen  i  inndatadokumentet.  For eksempel oppløsningens avhengighet (for
              eksempel  lengde  i  piksler).  Valgmulighetene  er:  cybookg3,  cybook_opus,  default,  hanlinv3,
              hanlinv5,  illiad,  irexdr1000,  irexdr800,  kindle,  msreader,  mobipocket,  nook, sony, sony300,
              sony900

       --list-recipes
              List builtin recipe names. You can create an e-book from a builtin recipe like this: ebook-convert
              "Recipe Name.recipe" output.epub

       --output-profile
              Specify  the  output  profile.  The output profile tells the conversion system how to optimize the
              created document for the specified device. In some  cases,  an  output  profile  can  be  used  to
              optimize  the  output for a particular device, but this is rarely necessary. Choices are:cybookg3,
              cybook_opus,  default,  generic_eink,  generic_eink_hd,  generic_eink_large,  hanlinv3,  hanlinv5,
              illiad,   ipad,   ipad3,   irexdr1000,   irexdr800,   jetbook5,  kindle,  kindle_dx,  kindle_fire,
              kindle_oasis,  kindle_pw,  kindle_pw3,  kindle_scribe,  kindle_voyage,  kobo,  tablet,   msreader,
              mobipocket,  nook,  nook_color,  nook_hd_plus,  pocketbook_inkpad3, pocketbook_lux, pocketbook_hd,
              pocketbook_900, pocketbook_pro_912, galaxy, sony, sony300, sony900, sony-landscape, sonyt3

       --version
              show program's version number and exit

VALG FOR INNDATA

       Valgmuligheter for å kontrollere prosesseringen av inndata mobi filen

       --input-encoding
              Spesifiser tegnsettkoden til dokumentet. Om valgt, vil dette valget overskrive enhver koding laget
              av  dokumentet  selv.  Det  er spesielt nyttig for dokumenter som ikke angir et kodesett eller som
              viser feilmeldinger.

VALG FOR UTDATA

       Valgmuligheter for å kontrollere prosesseringen av utdata epub

       --dont-split-on-page-breaks
              Turn off splitting at page breaks. Normally, input files are automatically  split  at  every  page
              break  into  two  files.  This  gives  an  output  e-book  that can be parsed faster and with less
              resources. However, splitting is slow and if your source file contains a very large number of page
              breaks, you should turn off splitting on page breaks.

       --epub-flatten
              Dette  valget  behøves  kun  dersom  du  ønkser  å  benytte  EPUB  med FBReaderj. Det vil redusere
              filsystemet i EPUB ved at det setter alle filer til toppnivå.

       --epub-inline-toc
              Insert an inline Table of Contents that will appear as part of the main book content.

       --epub-max-image-size
              The maximum image size (width x height). A value of none means use the screen size from the output
              profile.  A  value  of profile means no maximum size is specified. For example, a value of 100x200
              will cause all images to be resized so that their width is no  more  than  100  pixels  and  their
              height  is no more than 200 pixels. Note that this only affects the size of the actual image files
              themselves. Any given image may be rendered at a different size depending on the  styling  applied
              to it in the document.

       --epub-toc-at-end
              Put the inserted inline Table of Contents at the end of the book instead of the start.

       --epub-version
              The version of the EPUB file to generate. EPUB 2 is the most widely compatible, only use EPUB 3 if
              you know you actually need it.

       --extract-to
              Extract the contents of the generated EPUB file to the  specified  folder.  The  contents  of  the
              folder are first deleted, so be careful.

       --flow-size
              Split  all HTML files larger than this size (in KB). This is necessary as most EPUB readers cannot
              handle large file sizes. The default of 260KB is the size required for Adobe Digital Editions. Set
              to 0 to disable size based splitting.

       --no-default-epub-cover
              Normalt,  dersom  inndatafilen ikke har noe omslag, og du ikke ønsker å spesifisere ett, så vil et
              standard omslag bli generert med tittel, forfatter osv. Dette valget slår av genereringen av dette
              omslaget.

       --no-svg-cover
              Bruk  ikke  SVG  til  bokomslaget. Dette valget dersom din EPUB skal benyttes på en enhet som ikke
              støtter SVG, som iPhone eller JetBook Lite. Uten dette valget vil slike enheter vise omslaget  som
              en tom side.

       --preserve-cover-aspect-ratio
              Når  SVG  omslag  benyttes,  vil  dette  valget  gjøre  at  omslaget  skaleres  til å benytte hele
              skjermområdet, men fortsatt beholde dets aspektområde (høyde og bredde). Dette betyr  at  det  kan
              oppstå  hvite  avgrensninger  på  sidene,  toppen  og  bunnen av et bilde, men bildet vil ikke bli
              forskjøvet. Uten dette valget kan bildet bli noe forskjøvet, men ingen avgrensninger vil oppstå.

       --pretty-print
              Om spesifisert, vil Utdata programtillegget forsøke å lage data som er så lesbart som  mulig.  Det
              er mulig at dette ikke har effekt for enkelte av programtilleggene.

       --toc-title
              Title for any generated inline table of contents.

UTSEENDE OG FØLELSE

       Valgmuligheter for å kontrollere utseendeinnstillinger for utdata

       --asciiize
              Transliterate  Unicode  characters  to  an  ASCII  representation. Use with care because this will
              replace Unicode characters with ASCII. For instance it will replace "Pelé" with "Pele". Also, note
              that  in  cases  where  there  are  multiple  representations of a character (characters shared by
              Chinese and Japanese for instance) the representation  based  on  the  current  calibre  interface
              language will be used.

       --base-font-size
              The  base  font  size  in  pts. All font sizes in the produced book will be rescaled based on this
              size. By choosing a larger size you can make the fonts in the output bigger  and  vice  versa.  By
              default,  when  the  value  is  zero, the base font size is chosen based on the output profile you
              chose.

       --change-justification
              Forandre  tekstjustering.  en  verdi  for  "venstre"  endrer  all  justert  tekst  i  kilden   til
              venstrejustert  tekst  (f.eks.  ujustert).  En  verdi  for  "juster" endrer all ujustert tekst til
              justert. en verdi for "original" (standard) forandrer ikke justeringen i  kildefilen.  Legg  merke
              til at kun noen utdataformater støtter justeringer.

       --disable-font-rescaling
              Slå av all omskalering av fontstørrelser.

       --embed-all-fonts
              Embed  every  font  that  is  referenced in the input document but not already embedded. This will
              search your system for the fonts, and if found, they will be embedded. Embedding will only work if
              the  format you are converting to supports embedded fonts, such as EPUB, AZW3, DOCX or PDF. Please
              ensure that you have the proper license for embedding the fonts used in this document.

       --embed-font-family
              Embed the specified font family into the book. This specifies the "base" font used for  the  book.
              If  the  input document specifies its own fonts, they may override this base font. You can use the
              filter style information option to remove fonts from the input document. Note that font  embedding
              only works with some output formats, principally EPUB, AZW3 and DOCX.

       --expand-css
              By  default,  calibre  will  use  the  shorthand  form  for various CSS properties such as margin,
              padding, border, etc. This option will cause it to use the full expanded form instead.  Note  that
              CSS  is  always expanded when generating EPUB files with the output profile set to one of the Nook
              profiles as the Nook cannot handle shorthand CSS.

       --extra-css
              Enten stien til CSS stilsett eller rå CSS. Denne CSSen vil bli  avhengig  av  stilsettreglene  fra
              kildefilen, slik at den kan bli brukt til å tilsidesette disse reglene.

       --filter-css
              A  comma  separated  list of CSS properties that will be removed from all CSS style rules. This is
              useful if the presence of some style information prevents it from being overridden on your device.
              For example: font-family,color,margin-left,margin-right

       --font-size-mapping
              Kartlegging  fra  CSS  fontnavn  til  fontstørrelser  i  poeng.  Et  eksempel  på innstillinger er
              12,12,14,16,18,20,22,24. Dette er kartleggingen for størrelsene  xx-liten  til  xx-stor,  med  den
              siste  størrelsen  som store fonter. Font-omskaleringsalgoritmene benytter disse størrelsene til å
              omskalere fontene på en hensiktsmessig  måte.  Standard  er  å  benytte  kartleggingen  basert  på
              utdataprofilen du benytter.

       --insert-blank-line
              Sett  inn  en  blank  linje mellom avsnitt. Dette vil ikke fungere dersom kildefilen ikke benytter
              avsnitt (<p> eller <div> tagger).

       --insert-blank-line-size
              Set the height of the inserted blank lines (in em). The height of  the  lines  between  paragraphs
              will be twice the value set here.

       --keep-ligatures
              Preserve  ligatures present in the input document. A ligature is a combined character of a pair of
              characters like ff, fi, fl et cetera. Most readers do not have  support  for  ligatures  in  their
              default  fonts, so they are unlikely to render correctly. By default, calibre will turn a ligature
              into the corresponding pair of normal characters. Note  that  ligatures  here  mean  only  unicode
              ligatures not ligatures created via CSS or font styles. This option will preserve them instead.

       --line-height
              Linjehøyde  i  poeng. Kontrollerer avstanden mellom påfølgende linjer med tekst. Dette gjelder kun
              elementer som ikke definerer sin egen linjehøyde. I de fleste  tilfeller  er  valget  med  minimum
              linjehøyde det mest anvendelige. Som standard benyttes ikke manipulasjon av linjehøyde.

       --linearize-tables
              Noen  dårlig utformede dokumenter benytter tabeller til å styre formgivingen av teksten i en side.
              Når man konverterer disse dokumentene, vil disse dokumentene ofte ha tekst som strekker seg utover
              bokkantene,  samt andre artefakter. Dette valget vil utvinne innholdet fra tabellene og presentere
              det på en lineær måte.

       --margin-bottom
              Set the bottom margin in pts. Default is 5.0. Setting this to less than zero will cause no  margin
              to  be  set  (the  margin setting in the original document will be preserved). Note: Page oriented
              formats such as PDF and DOCX have their own margin settings that take precedence.

       --margin-left
              Set the left margin in pts. Default is 5.0. Setting this to less than zero will cause no margin to
              be  set  (the  margin  setting  in  the  original document will be preserved). Note: Page oriented
              formats such as PDF and DOCX have their own margin settings that take precedence.

       --margin-right
              Set the right margin in pts. Default is 5.0. Setting this to less than zero will cause  no  margin
              to  be  set  (the  margin setting in the original document will be preserved). Note: Page oriented
              formats such as PDF and DOCX have their own margin settings that take precedence.

       --margin-top
              Set the top margin in pts. Default is 5.0. Setting this to less than zero will cause no margin  to
              be  set  (the  margin  setting  in  the  original document will be preserved). Note: Page oriented
              formats such as PDF and DOCX have their own margin settings that take precedence.

       --minimum-line-height
              Den minste linjehøyden som prosenttall av elementets kalkulerte tegnstørrelse. calibre  vil  sikre
              at  hvert  element har en linjehøyde med minst denne innstillingen, uansett hva inndata-dokumentet
              spesifiserer.  Sett  null  for  å  slå  av.  Standard  er  120%.  Benytt  denne  innstillingen   i
              innstillingene  til  den  direkte  linjehøydens  spesifikasjon,  om  du  ikke vet hva du gjør. For
              eksempel så kan du få dobbel linjeavstand ved å sette innstillingen til 240.

       --remove-paragraph-spacing
              Fjern avstand mellom avsnitt. Setter også en kommando for avsnitt  på  1,5.  Avstandsfjerning  vil
              ikke fungere dersom kildefilen ikke benytter avsnitt (<p> eller <div> emndeord).

       --remove-paragraph-spacing-indent-size
              When  calibre removes blank lines between paragraphs, it automatically sets a paragraph indent, to
              ensure that paragraphs can be easily distinguished. This option controls the width of that  indent
              (in  em). If you set this value negative, then the indent specified in the input document is used,
              that is, calibre does not change the indentation.

       --smarten-punctuation
              Convert plain quotes, dashes and  ellipsis  to  their  typographically  correct  equivalents.  For
              details, see https://daringfireball.net/projects/smartypants.

       --subset-embedded-fonts
              Subset  all embedded fonts. Every embedded font is reduced to contain only the glyphs used in this
              document. This decreases the size of the font files. Useful if you are  embedding  a  particularly
              large font with lots of unused glyphs.

       --transform-css-rules
              Path  to  a  file  containing  rules  to transform the CSS styles in this book. The easiest way to
              create such a file is to use the wizard for creating rules in the calibre GUI. Access  it  in  the
              "Look  &  feel->Transform styles" section of the conversion dialog. Once you create the rules, you
              can use the "Export" button to save them to a file.

       --transform-html-rules
              Path to a file containing rules to transform the HTML in this book. The easiest way to create such
              a  file  is  to  use  the  wizard  for creating rules in the calibre GUI. Access it in the "Look &
              feel->Transform HTML" section of the conversion dialog. Once you create the rules, you can use the
              "Export" button to save them to a file.

       --unsmarten-punctuation
              Convert fancy quotes, dashes and ellipsis to their plain equivalents.

HEURISTIC PROCESSING

       Modify   the   document   text   and   structure   using   common  patterns.  Disabled  by  default.  Use
       --enable-heuristics to enable.  Individual actions can be disabled with the --disable-* options.

       --disable-dehyphenate
              Analyser ord med bindestrek i dokumentet. Dokumentet selv benyttes som ordbok for å avgjøre om  en
              bindestrek skal beholdes eller fjernes.

       --disable-delete-blank-paragraphs
              Fjern tomme avsnitt fra dokumentet når de finnes mellom annenhvert avsnitt

       --disable-fix-indents
              Gjør om innrykk laget fra flere sidebrytinger til CSS-innrykk.

       --disable-format-scene-breaks
              Left  aligned  scene break markers are center aligned. Replace soft scene breaks that use multiple
              blank lines with horizontal rules.

       --disable-italicize-common-cases
              Søk etter vanlige ord og mønstre som noterer seg skråskrift og gjør dem om til skråskrift.

       --disable-markup-chapter-headings
              Finn uformaterte kapitteloverskrifter og undertekst til overskrifter. Forandre dem til  h2  og  h3
              nøkkelord.  Denne  innstillingen  vil  ikke  lage  en  TOC,  men  kan  benyttes  i  sammenheng med
              strukturdeteksjon for å lage en.

       --disable-renumber-headings
              Ser etter hendelser av etterfølgende <h1> eller <h2> tagger. Taggene blir omnummerert for å hindre
              splittelse av kapitteloverskriftenes senter.

       --disable-unwrap-lines
              Pakk opp linjer som bruker interpunksjon og andre formateringsspor.

       --enable-heuristics
              Slå  på  heuristisk  oppgavekjøring.  Dette valget må legges inn før noen heuristiske oppgaver kan
              kjøres.

       --html-unwrap-factor
              Skala brukt for å bestemme lengden som en linje skal pakkes opp. Gyldige  verdier  er  et  desimal
              mellom  0  og  1.  Standard  er 0.4, like under medianlinjens lengde. Dersom bare noen få linjer i
              dokumentet behøves pakkes opp, bør denne verdien reduseres.

       --replace-scene-breaks
              Replace scene breaks with the specified text. By default, the text  from  the  input  document  is
              used.

SØK OG ERSTATT

       Modifiser dokumentets tekst og struktur ved å benytte egendefinerte mønstre.

       --search-replace
              Path  to  a  file  containing  search  and  replace  regular  expressions.  The  file must contain
              alternating lines of regular expression followed by replacement pattern (which  can  be  an  empty
              line).  The  regular  expression  must  be  in  the Python regex syntax and the file must be UTF-8
              encoded.

       --sr1-replace
              Erstatning for å erstatte tekst funnet med srl-søk.

       --sr1-search
              Søker etter mønster (ordinære uttrykk) som skal erstattes med srl-replace.

       --sr2-replace
              Erstatning for å erstatte tekst funnet med sr2-søk.

       --sr2-search
              Søk etter mønster (regulære uttrykk) som skal erstattes med sr2-replace.

       --sr3-replace
              Erstatning for å erstatte tekst funnet med sr3-søk.

       --sr3-search
              Søk etter mønster (regulært uttrykk) som skal erstattes med sr3-erstatning.

STRUCTURE DETECTION

       Kontrollerer auto detektering av dokument strukturen.

       --add-alt-text-to-img
              When an <img> tag has no alt  attribute,  check  the  associated  image  file  for  metadata  that
              specifies  alternate  text,  and use it to fill in the alt attribute. The alt attribute is used by
              screen readers for assisting the visually challenged.

       --chapter
              An XPath expression to detect chapter titles. The default is to consider <h1> or  <h2>  tags  that
              contain the words "chapter", "book", "section", "prologue", "epilogue" or "part" as chapter titles
              as well as any tags that have class="chapter". The expression used must  evaluate  to  a  list  of
              elements.  To  disable  chapter  detection,  use the expression "/". See the XPath Tutorial in the
              calibre User Manual for further help on using this feature.

       --chapter-mark
              Spesifiser hvordan å markere detekterte kapitler. Verdien "pagebreak" vil sette inn sideavslutning
              før  kapitler. Verdien "rule" vil sette inn en linje før kapitler. Verdien "none" vil ikke medføre
              kapittel markering og verdien "both" vil  bruke  både  sideavslutning  og  linjer  for  å  markere
              kapitler.

       --disable-remove-fake-margins
              Some  documents  specify  page  margins  by  specifying a left and right margin on each individual
              paragraph. calibre will try to detect and remove these margins.  Sometimes,  this  can  cause  the
              removal of margins that should not have been removed. In this case you can disable the removal.

       --insert-metadata
              Insert  the  book metadata at the start of the book. This is useful if your e-book reader does not
              support displaying/searching metadata directly.

       --page-breaks-before
              An XPath expression. Page breaks are inserted before the specified elements. To  disable  use  the
              expression: /

       --prefer-metadata-cover
              Bruk omslagsbilde fra kildefilen fremfor spesifisert omslagsbilde.

       --remove-first-image
              Remove  the first image from the input e-book. Useful if the input document has a cover image that
              is not identified as a cover. In this case, if you set a cover in  calibre,  the  output  document
              will end up with two cover images if you do not specify this option.

       --start-reading-at
              An  XPath expression to detect the location in the document at which to start reading. Some e-book
              reading programs (most prominently the Kindle) use this location as the position at which to  open
              the book. See the XPath tutorial in the calibre User Manual for further help using this feature.

INNHOLDSFORTEGNELSE

       Kontroller   automatisk   generering  av  innholdsliste.  Som  standardvalg,  dersom  kildefilen  har  en
       innholdsliste, vil denne bli benyttet som preferanse til den automatiske genererte versjonen.

       --duplicate-links-in-toc
              When creating a TOC from links in the input document, allow duplicate  entries,  i.e.  allow  more
              than one entry with the same text, provided that they point to a different location.

       --level1-toc
              XPath  expression  that  specifies all tags that should be added to the Table of Contents at level
              one. If this is specified, it takes precedence over other forms of auto-detection. See  the  XPath
              Tutorial in the calibre User Manual for examples.

       --level2-toc
              XPath  expression  that  specifies all tags that should be added to the Table of Contents at level
              two. Each entry is added under the previous level one entry. See the XPath Tutorial in the calibre
              User Manual for examples.

       --level3-toc
              XPath  expression  that  specifies all tags that should be added to the Table of Contents at level
              three. Each entry is added under the previous level two entry.  See  the  XPath  Tutorial  in  the
              calibre User Manual for examples.

       --max-toc-links
              Høyeste  antall lenker som legges til TOC. Sett 0 for å slå av. Standard er: 50. Lenker legges kun
              til TOC dersom færre enn terskelantallet for kapitler har blitt oppdaget.

       --no-chapters-in-toc
              Ikke legg til automatisk oppdagede kapitler til innholdsregisteret.

       --toc-filter
              Fjern oppføringer fra innholdsfortegnelsen hvis  titler  samsvarer  med  de  spesifiserte  vanlige
              uttrykkene. Samsvarende oppføringer og alle deres under-uttrykk er fjernet.

       --toc-threshold
              Om  færre  enn  dette  antallet  kapitler  blir  oppdaget, legges lenker til innholdsfortegnelsen.
              Standard: 6

       --use-auto-toc
              Normalt, om kildefilen allerede  har  en  innholdsliste,  benyttes  den  som  preferanse  til  den
              auto-genererte listen. Med dette valget blir den auto-genererte alltid benyttet.

METADATA

       Valgmuligheter for å legge inn metadata i utdatafilen

       --author-sort
              Streng som skal benyttes når man sorterer etter forfatter.

       --authors
              Sett inn forfatter. Om flere forfattere skal benyttes, må disse separeres med et-tegnet - &

       --book-producer
              Legg inn bokprodusent.

       --comments
              Set the e-book description.

       --cover
              Legg inn forsidebilde til den spesifiserte filen eller URL adressen

       --isbn Legg inn ISBN for boken.

       --language
              Velg språk

       --pubdate
              Set  the  publication date (assumed to be in the local timezone, unless the timezone is explicitly
              specified)

       --publisher
              Set the e-book publisher.

       --rating
              Legg inn bedømmelse. Må være et nummer mellom 1 og 5.

       --read-metadata-from-opf, --from-opf, -m
              Les metadata fra den spesifiserte OPF filen. Metadata lest fra denne  filen  vil  overskrive  alle
              metadata i kildefilen.

       --series
              Set the series this e-book belongs to.

       --series-index
              Legg inn indeksen til boken i denne serien.

       --tags Legg inn emneord for boken. Benytt en kommaseparert listing.

       --timestamp
              Set the book timestamp (no longer used anywhere)

       --title
              Bestem tittelen.

       --title-sort
              Tittelversjonen som skal benyttes til sortering.

FEILSØK

       Valgmuligheter for hjelp med feilsøk av konverteringen

       --debug-pipeline, -d
              Save  the  output from different stages of the conversion pipeline to the specified folder. Useful
              if you are unsure at which stage of the conversion process a bug is occurring.

       --verbose, -v
              Level of verbosity. Specify multiple times for greater verbosity. Specifying it twice will  result
              in full verbosity, once medium verbosity and zero times least verbosity.

AUTHOR

       Kovid Goyal

COPYRIGHT

       Kovid Goyal