Provided by: perl-doc_5.40.1-2_all 
NAME
Time::HiRes - High resolution alarm, sleep, gettimeofday, interval timers
SYNOPSIS
use Time::HiRes qw( usleep ualarm gettimeofday tv_interval nanosleep
clock_gettime clock_getres clock_nanosleep clock
stat lstat utime);
usleep ($microseconds);
nanosleep ($nanoseconds);
ualarm ($microseconds);
ualarm ($microseconds, $interval_microseconds);
$t0 = [gettimeofday];
($seconds, $microseconds) = gettimeofday;
$elapsed = tv_interval ( $t0, [$seconds, $microseconds]);
$elapsed = tv_interval ( $t0, [gettimeofday]);
$elapsed = tv_interval ( $t0 );
use Time::HiRes qw ( time alarm sleep );
$now_fractions = time;
sleep ($floating_seconds);
alarm ($floating_seconds);
alarm ($floating_seconds, $floating_interval);
use Time::HiRes qw( setitimer getitimer );
setitimer ($which, $floating_seconds, $floating_interval );
getitimer ($which);
use Time::HiRes qw( clock_gettime clock_getres clock_nanosleep
CLOCK_REALTIME ITIMER_REAL ITIMER_VIRTUAL ITIMER_PROF
ITIMER_REALPROF );
$realtime = clock_gettime(CLOCK_REALTIME);
$resolution = clock_getres(CLOCK_REALTIME);
clock_nanosleep(CLOCK_REALTIME, 1.5e9);
clock_nanosleep(CLOCK_REALTIME, time()*1e9 + 10e9, TIMER_ABSTIME);
my $ticktock = clock();
use Time::HiRes qw( stat lstat );
my @stat = stat("file");
my @stat = stat(FH);
my @stat = lstat("file");
use Time::HiRes qw( utime );
utime $floating_seconds, $floating_seconds, file...;
DESCRIPTION
The "Time::HiRes" module implements a Perl interface to the "usleep", "nanosleep", "ualarm",
"gettimeofday", and "setitimer"/"getitimer" system calls, in other words, high resolution time and
timers. See the "EXAMPLES" section below and the test scripts for usage; see your system documentation
for the description of the underlying "nanosleep" or "usleep", "ualarm", "gettimeofday", and
"setitimer"/"getitimer" calls.
If your system lacks gettimeofday() or an emulation of it you don't get gettimeofday() or the one-
argument form of tv_interval(). If your system lacks all of nanosleep(), usleep(), select(), and "poll",
you don't get Time::HiRes::usleep(), Time::HiRes::nanosleep(), or Time::HiRes::sleep(). If your system
lacks both ualarm() and setitimer() you don't get Time::HiRes::ualarm() or Time::HiRes::alarm().
If you try to import an unimplemented function in the "use" statement it will fail at compile time.
If your subsecond sleeping is implemented with nanosleep() instead of usleep(), you can mix subsecond
sleeping with signals since nanosleep() does not use signals. This, however, is not portable, and you
should first check for the truth value of &Time::HiRes::d_nanosleep to see whether you have nanosleep,
and then carefully read your nanosleep() C API documentation for any peculiarities.
If you are using "nanosleep" for something else than mixing sleeping with signals, give some thought to
whether Perl is the tool you should be using for work requiring nanosecond accuracies.
Remember that unless you are working on a hard realtime system, any clocks and timers will be imprecise,
especially so if you are working in a pre-emptive multiuser system. Understand the difference between
wallclock time and process time (in UNIX-like systems the sum of user and system times). Any attempt to
sleep for X seconds will most probably end up sleeping more than that, but don't be surprised if you end
up sleeping slightly less.
The following functions can be imported from this module. No functions are exported by default.
gettimeofday ()
In array context returns a two-element array with the seconds and microseconds since the epoch. In
scalar context returns floating seconds like Time::HiRes::time() (see below).
usleep ( $useconds )
Sleeps for the number of microseconds (millionths of a second) specified. Returns the number of
microseconds actually slept. Can sleep for more than one second, unlike the "usleep" system call.
Can also sleep for zero seconds, which often works like a thread yield. See also
Time::HiRes::sleep(), and clock_nanosleep().
Do not expect usleep() to be exact down to one microsecond.
nanosleep ( $nanoseconds )
Sleeps for the number of nanoseconds (1e9ths of a second) specified. Returns the number of
nanoseconds actually slept (accurate only to microseconds, the nearest thousand of them). Can sleep
for more than one second. Can also sleep for zero seconds, which often works like a thread yield.
See also Time::HiRes::sleep(), Time::HiRes::usleep(), and clock_nanosleep().
Do not expect nanosleep() to be exact down to one nanosecond. Getting even accuracy of one thousand
nanoseconds is good.
ualarm ( $useconds [, $interval_useconds ] )
Issues a "ualarm" call; the $interval_useconds is optional and will be zero if unspecified, resulting
in "alarm"-like behaviour.
Returns the remaining time in the alarm in microseconds, or "undef" if an error occurred.
ualarm(0) will cancel an outstanding ualarm().
Note that the interaction between alarms and sleeps is unspecified.
tv_interval
tv_interval ( $ref_to_gettimeofday [, $ref_to_later_gettimeofday] )
Returns the floating seconds between the two times, which should have been returned by
gettimeofday(). If the second argument is omitted, then the current time is used.
time ()
Returns a floating seconds since the epoch. This function can be imported, resulting in a nice drop-
in replacement for the "time" provided with core Perl; see the "EXAMPLES" below.
NOTE 1: This higher resolution timer can return values either less or more than the core time(),
depending on whether your platform rounds the higher resolution timer values up, down, or to the
nearest second to get the core time(), but naturally the difference should be never more than half a
second. See also "clock_getres", if available in your system.
NOTE 2: Since Sunday, September 9th, 2001 at 01:46:40 AM GMT, when the time() seconds since epoch
rolled over to 1_000_000_000, the default floating point format of Perl and the seconds since epoch
have conspired to produce an apparent bug: if you print the value of Time::HiRes::time() you seem to
be getting only five decimals, not six as promised (microseconds). Not to worry, the microseconds
are there (assuming your platform supports such granularity in the first place). What is going on is
that the default floating point format of Perl only outputs 15 digits. In this case that means ten
digits before the decimal separator and five after. To see the microseconds you can use either
"printf"/"sprintf" with "%.6f", or the gettimeofday() function in list context, which will give you
the seconds and microseconds as two separate values.
sleep ( $floating_seconds )
Sleeps for the specified amount of seconds. Returns the number of seconds actually slept (a floating
point value). This function can be imported, resulting in a nice drop-in replacement for the "sleep"
provided with perl, see the "EXAMPLES" below.
Note that the interaction between alarms and sleeps is unspecified.
alarm ( $floating_seconds [, $interval_floating_seconds ] )
The "SIGALRM" signal is sent after the specified number of seconds. Implemented using setitimer() if
available, ualarm() if not. The $interval_floating_seconds argument is optional and will be zero if
unspecified, resulting in alarm()-like behaviour. This function can be imported, resulting in a nice
drop-in replacement for the "alarm" provided with perl, see the "EXAMPLES" below.
Returns the remaining time in the alarm in seconds, or "undef" if an error occurred.
NOTE 1: With some combinations of operating systems and Perl releases "SIGALRM" restarts select(),
instead of interrupting it. This means that an alarm() followed by a select() may together take the
sum of the times specified for the alarm() and the select(), not just the time of the alarm().
Note that the interaction between alarms and sleeps is unspecified.
setitimer ( $which, $floating_seconds [, $interval_floating_seconds ] )
Start up an interval timer: after a certain time, a signal ($which) arrives, and more signals may
keep arriving at certain intervals. To disable an "itimer", use $floating_seconds of zero. If the
$interval_floating_seconds is set to zero (or unspecified), the timer is disabled after the next
delivered signal.
Use of interval timers may interfere with alarm(), sleep(), and usleep(). In standard-speak the
"interaction is unspecified", which means that anything may happen: it may work, it may not.
In scalar context, the remaining time in the timer is returned.
In list context, both the remaining time and the interval are returned.
There are usually three or four interval timers (signals) available: the $which can be "ITIMER_REAL",
"ITIMER_VIRTUAL", "ITIMER_PROF", or "ITIMER_REALPROF". Note that which ones are available depends:
true UNIX platforms usually have the first three, but only Solaris seems to have "ITIMER_REALPROF"
(which is used to profile multithreaded programs). Win32 unfortunately does not have interval
timers.
"ITIMER_REAL" results in alarm()-like behaviour. Time is counted in real time; that is, wallclock
time. "SIGALRM" is delivered when the timer expires.
"ITIMER_VIRTUAL" counts time in (process) virtual time; that is, only when the process is running.
In multiprocessor/user/CPU systems this may be more or less than real or wallclock time. (This time
is also known as the user time.) "SIGVTALRM" is delivered when the timer expires.
"ITIMER_PROF" counts time when either the process virtual time or when the operating system is
running on behalf of the process (such as I/O). (This time is also known as the system time.) (The
sum of user time and system time is known as the CPU time.) "SIGPROF" is delivered when the timer
expires. "SIGPROF" can interrupt system calls.
The semantics of interval timers for multithreaded programs are system-specific, and some systems may
support additional interval timers. For example, it is unspecified which thread gets the signals.
See your setitimer(2) documentation.
getitimer ( $which )
Return the remaining time in the interval timer specified by $which.
In scalar context, the remaining time is returned.
In list context, both the remaining time and the interval are returned. The interval is always what
you put in using setitimer().
clock_gettime ( $which )
Return as seconds the current value of the POSIX high resolution timer specified by $which. All
implementations that support POSIX high resolution timers are supposed to support at least the $which
value of "CLOCK_REALTIME", which is supposed to return results close to the results of
"gettimeofday", or the number of seconds since 00:00:00:00 January 1, 1970 Greenwich Mean Time (GMT).
Do not assume that CLOCK_REALTIME is zero, it might be one, or something else. Another potentially
useful (but not available everywhere) value is "CLOCK_MONOTONIC", which guarantees a monotonically
increasing time value (unlike time() or gettimeofday(), which can be adjusted). See your system
documentation for other possibly supported values.
clock_getres ( $which )
Return as seconds the resolution of the POSIX high resolution timer specified by $which. All
implementations that support POSIX high resolution timers are supposed to support at least the $which
value of "CLOCK_REALTIME", see "clock_gettime".
NOTE: the resolution returned may be highly optimistic. Even if the resolution is high (a small
number), all it means is that you'll be able to specify the arguments to clock_gettime() and
clock_nanosleep() with that resolution. The system might not actually be able to measure events at
that resolution, and the various overheads and the overall system load are certain to affect any
timings.
clock_nanosleep ( $which, $nanoseconds, $flags = 0)
Sleeps for the number of nanoseconds (1e9ths of a second) specified. Returns the number of
nanoseconds actually slept. The $which is the "clock id", as with clock_gettime() and
clock_getres(). The flags default to zero but "TIMER_ABSTIME" can specified (must be exported
explicitly) which means that $nanoseconds is not a time interval (as is the default) but instead an
absolute time. Can sleep for more than one second. Can also sleep for zero seconds, which often
works like a thread yield. See also Time::HiRes::sleep(), Time::HiRes::usleep(), and
Time::HiRes::nanosleep().
Do not expect clock_nanosleep() to be exact down to one nanosecond. Getting even accuracy of one
thousand nanoseconds is good.
clock()
Return as seconds the process time (user + system time) spent by the process since the first call to
clock() (the definition is not "since the start of the process", though if you are lucky these times
may be quite close to each other, depending on the system). What this means is that you probably
need to store the result of your first call to clock(), and subtract that value from the following
results of clock().
The time returned also includes the process times of the terminated child processes for which wait()
has been executed. This value is somewhat like the second value returned by the times() of core
Perl, but not necessarily identical. Note that due to backward compatibility limitations the
returned value may wrap around at about 2147 seconds or at about 36 minutes.
stat
stat FH
stat EXPR
lstat
lstat FH
lstat EXPR
As "stat" in perlfunc or "lstat" in perlfunc but with the access/modify/change file timestamps in
subsecond resolution, if the operating system and the filesystem both support such timestamps. To
override the standard stat():
use Time::HiRes qw(stat);
Test for the value of &Time::HiRes::d_hires_stat to find out whether the operating system supports
subsecond file timestamps: a value larger than zero means yes. There are unfortunately no easy ways
to find out whether the filesystem supports such timestamps. UNIX filesystems often do; NTFS does;
FAT doesn't (FAT timestamp granularity is two seconds).
A zero return value of &Time::HiRes::d_hires_stat means that Time::HiRes::stat is a no-op passthrough
for CORE::stat() (and likewise for lstat), and therefore the timestamps will stay integers. The same
thing will happen if the filesystem does not do subsecond timestamps, even if the
&Time::HiRes::d_hires_stat is non-zero.
In any case do not expect nanosecond resolution, or even a microsecond resolution. Also note that
the modify/access timestamps might have different resolutions, and that they need not be
synchronized, e.g. if the operations are
write
stat # t1
read
stat # t2
the access time stamp from t2 need not be greater-than the modify time stamp from t1: it may be equal
or less.
utime LIST
As "utime" in perlfunc but with the ability to set the access/modify file timestamps in subsecond
resolution, if the operating system and the filesystem, and the mount options of the filesystem, all
support such timestamps.
To override the standard utime():
use Time::HiRes qw(utime);
Test for the value of &Time::HiRes::d_hires_utime to find out whether the operating system supports
setting subsecond file timestamps.
As with CORE::utime(), passing undef as both the atime and mtime will call the syscall with a NULL
argument.
The actual achievable subsecond resolution depends on the combination of the operating system and the
filesystem.
Modifying the timestamps may not be possible at all: for example, the "noatime" filesystem mount
option may prohibit you from changing the access time timestamp.
Returns the number of files successfully changed.
EXAMPLES
use Time::HiRes qw(usleep ualarm gettimeofday tv_interval);
$microseconds = 750_000;
usleep($microseconds);
# signal alarm in 2.5s & every .1s thereafter
ualarm(2_500_000, 100_000);
# cancel that ualarm
ualarm(0);
# get seconds and microseconds since the epoch
($s, $usec) = gettimeofday();
# measure elapsed time
# (could also do by subtracting 2 gettimeofday return values)
$t0 = [gettimeofday];
# do bunch of stuff here
$t1 = [gettimeofday];
# do more stuff here
$t0_t1 = tv_interval $t0, $t1;
$elapsed = tv_interval ($t0, [gettimeofday]);
$elapsed = tv_interval ($t0); # equivalent code
#
# replacements for time, alarm and sleep that know about
# floating seconds
#
use Time::HiRes;
$now_fractions = Time::HiRes::time;
Time::HiRes::sleep (2.5);
Time::HiRes::alarm (10.6666666);
use Time::HiRes qw ( time alarm sleep );
$now_fractions = time;
sleep (2.5);
alarm (10.6666666);
# Arm an interval timer to go off first at 10 seconds and
# after that every 2.5 seconds, in process virtual time
use Time::HiRes qw ( setitimer ITIMER_VIRTUAL time );
$SIG{VTALRM} = sub { print time, "\n" };
setitimer(ITIMER_VIRTUAL, 10, 2.5);
use Time::HiRes qw( clock_gettime clock_getres CLOCK_REALTIME );
# Read the POSIX high resolution timer.
my $high = clock_gettime(CLOCK_REALTIME);
# But how accurate we can be, really?
my $reso = clock_getres(CLOCK_REALTIME);
use Time::HiRes qw( clock_nanosleep TIMER_ABSTIME );
clock_nanosleep(CLOCK_REALTIME, 1e6);
clock_nanosleep(CLOCK_REALTIME, 2e9, TIMER_ABSTIME);
use Time::HiRes qw( clock );
my $clock0 = clock();
... # Do something.
my $clock1 = clock();
my $clockd = $clock1 - $clock0;
use Time::HiRes qw( stat );
my ($atime, $mtime, $ctime) = (stat("istics"))[8, 9, 10];
C API
In addition to the perl API described above, a C API is available for extension writers. The following C
functions are available in the modglobal hash:
name C prototype
--------------- ----------------------
Time::NVtime NV (*)()
Time::U2time void (*)(pTHX_ UV ret[2])
Both functions return equivalent information (like "gettimeofday") but with different representations.
The names "NVtime" and "U2time" were selected mainly because they are operating system independent.
("gettimeofday" is Unix-centric, though some platforms like Win32 and VMS have emulations for it.)
Here is an example of using "NVtime" from C:
NV (*myNVtime)(); /* Returns -1 on failure. */
SV **svp = hv_fetchs(PL_modglobal, "Time::NVtime", 0);
if (!svp) croak("Time::HiRes is required");
if (!SvIOK(*svp)) croak("Time::NVtime isn't a function pointer");
myNVtime = INT2PTR(NV(*)(), SvIV(*svp));
printf("The current time is: %" NVff "\n", (*myNVtime)());
DIAGNOSTICS
useconds or interval more than ...
In ualarm() you tried to use number of microseconds or interval (also in microseconds) more than
1_000_000 and setitimer() is not available in your system to emulate that case.
negative time not invented yet
You tried to use a negative time argument.
internal error: useconds < 0 (unsigned ... signed ...)
Something went horribly wrong-- the number of microseconds that cannot become negative just became
negative. Maybe your compiler is broken?
useconds or uinterval equal to or more than 1000000
In some platforms it is not possible to get an alarm with subsecond resolution and later than one second.
unimplemented in this platform
Some calls simply aren't available, real or emulated, on every platform.
CAVEATS
Notice that the core time() maybe rounding rather than truncating. What this means is that the core
time() may be reporting the time as one second later than gettimeofday() and Time::HiRes::time().
Adjusting the system clock (either manually or by services like ntp) may cause problems, especially for
long running programs that assume a monotonously increasing time (note that all platforms do not adjust
time as gracefully as UNIX ntp does). For example in Win32 (and derived platforms like Cygwin and MinGW)
the Time::HiRes::time() may temporarily drift off from the system clock (and the original time()) by up
to 0.5 seconds. Time::HiRes will notice this eventually and recalibrate. Note that since Time::HiRes
1.77 the clock_gettime(CLOCK_MONOTONIC) might help in this (in case your system supports
CLOCK_MONOTONIC).
Some systems have APIs but not implementations: for example QNX and Haiku have the interval timer APIs
but not the functionality.
In pre-Sierra macOS (pre-10.12, OS X) clock_getres(), clock_gettime() and clock_nanosleep() are emulated
using the Mach timers; as a side effect of being emulated the CLOCK_REALTIME and CLOCK_MONOTONIC are the
same timer.
gnukfreebsd seems to have non-functional futimens() and utimensat() (at least as of 10.1): therefore the
hires utime() does not work.
SEE ALSO
Perl modules BSD::Resource, Time::TAI64.
Your system documentation for clock(3), clock_gettime(2), clock_getres(3), clock_nanosleep(3),
clock_settime(2), getitimer(2), gettimeofday(2), setitimer(2), sleep(3), stat(2), ualarm(3).
AUTHORS
D. Wegscheid <wegscd@whirlpool.com> R. Schertler <roderick@argon.org> J. Hietaniemi <jhi@iki.fi> G. Aas
<gisle@aas.no>
COPYRIGHT AND LICENSE
Copyright (c) 1996-2002 Douglas E. Wegscheid. All rights reserved.
Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008 Jarkko Hietaniemi. All rights reserved.
Copyright (C) 2011, 2012, 2013 Andrew Main (Zefram) <zefram@fysh.org>
This program is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.