Provided by: vienna-rna_2.6.4+dfsg-1build1_amd64 
NAME
RNAeval - manual page for RNAeval 2.6.4
SYNOPSIS
RNAeval [OPTIONS] [<input0>] [<input1>]...
DESCRIPTION
RNAeval 2.6.4
Determine the free energy of a (consensus) secondary structure for (an alignment of) RNA
sequence(s)
Evaluates the free energy of a particular (consensus) secondary structure for an (an
alignment of) RNA molecule(s). The energy unit is kcal/mol and contains a covariance
pseudo-energy term for multiple sequence alignments (--msa option) and corresponding
consensus structures. The program will continue to read new sequences and structures
until a line consisting of the single character '@' or an end of file condition is
encountered. If the input sequence or structure contains the separator character '&' the
program calculates the energy of the co-folding of two RNA strands, where the '&' marks
the boundary between the two strands.
-h, --help
Print help and exit
--detailed-help
Print help, including all details and hidden options, and exit
--full-help
Print help, including hidden options, and exit
-V, --version
Print version and exit
-v, --verbose
Print out energy contribution of each loop in the structure.
(default=off)
I/O Options:
Command line options for input and output (pre-)processing
-i, --infile=filename
Read a file instead of reading from stdin.
The default behavior of RNAeval is to read input from stdin or the file(s) that
follow(s) the RNAeval command. Using this parameter the user can specify input file
names where data is read from. Note, that any additional files supplied to RNAeval
are still processed as well.
-a, --msa
Input is multiple sequence alignment in Stockholm 1.0 format.
(default=off)
Using this flag indicates that the input is a multiple sequence alignment (MSA)
instead of (a) single sequence(s). Note, that only STOCKHOLM format allows one to
specify a consensus structure. Therefore, this is the only supported MSA format for
now!
--mis Output "most informative sequence" instead of simple consensus: For each column of
the alignment output the set of nucleotides with frequency greater than average in
IUPAC notation.
(default=off)
-j, --jobs[=number]
Split batch input into jobs and start processing in parallel using multiple
threads. A value of 0 indicates to use as many parallel threads as computation
cores are available.
(default=`0')
Default processing of input data is performed in a serial fashion, i.e. one
sequence at a time. Using this switch, a user can instead start the computation for
many sequences in the input in parallel. RNAeval will create as many parallel
computation slots as specified and assigns input sequences of the input file(s) to
the available slots. Note, that this increases memory consumption since input
alignments have to be kept in memory until an empty compute slot is available and
each running job requires its own dynamic programming matrices.
--unordered
Do not try to keep output in order with input while parallel processing is in
place.
(default=off)
When parallel input processing (--jobs flag) is enabled, the order in which input
is processed depends on the host machines job scheduler. Therefore, any output to
stdout or files generated by this program will most likely not follow the order of
the corresponding input data set. The default of RNAeval is to use a specialized
data structure to still keep the results output in order with the input data.
However, this comes with a trade-off in terms of memory consumption, since all
output must be kept in memory for as long as no chunks of consecutive, ordered
output are available. By setting this flag, RNAeval will not buffer individual
results but print them as soon as they have been computated.
--noconv
Do not automatically substitute nucleotide "T" with "U".
(default=off)
--auto-id
Automatically generate an ID for each sequence. (default=off)
The default mode of RNAeval is to automatically determine an ID from the input
sequence data if the input file format allows to do that. Sequence IDs are usually
given in the FASTA header of input sequences. If this flag is active, RNAeval
ignores any IDs retrieved from the input and automatically generates an ID for each
sequence. This ID consists of a prefix and an increasing number. This flag can also
be used to add a FASTA header to the output even if the input has none.
--id-prefix=STRING
Prefix for automatically generated IDs (as used in output file names).
(default=`sequence')
If this parameter is set, each sequence will be prefixed with the provided string.
Note: Setting this parameter implies --auto-id.
--id-delim=CHAR
Change the delimiter between prefix and increasing number for automatically
generated IDs (as used in output file names).
(default=`_')
This parameter can be used to change the default delimiter '_' between the prefix
string and the increasing number for automatically generated ID.
--id-digits=INT
Specify the number of digits of the counter in automatically generated alignment
IDs.
(default=`4')
When alignments IDs are automatically generated, they receive an increasing number,
starting with 1. This number will always be left-padded by leading zeros, such that
the number takes up a certain width. Using this parameter, the width can be
specified to the users need. We allow numbers in the range [1:18]. This option
implies --auto-id.
--id-start=LONG
Specify the first number in automatically generated IDs.
(default=`1')
When sequence IDs are automatically generated, they receive an increasing number,
usually starting with 1. Using this parameter, the first number can be specified to
the users requirements. Note: negative numbers are not allowed. Note: Setting this
parameter implies to ignore any IDs retrieved from the input data, i.e. it
activates the --auto-id flag.
Algorithms:
Select additional algorithmic details which should be included in the calculations.
-c, --circ
Assume a circular (instead of linear) RNA molecule.
(default=off)
-g, --gquad
Incoorporate G-Quadruplex formation into the structure prediction algorithm.
(default=off)
Structure Constraints:
Command line options to interact with the structure constraints feature of this
program
--shape=filename
Use SHAPE reactivity data to guide structure predictions.
--shapeMethod=method
Select SHAPE reactivity data incorporation strategy.
(default=`D')
The following methods can be used to convert SHAPE reactivities into pseudo energy
contributions.
'D': Convert by using the linear equation according to Deigan et al 2009.
Derived pseudo energy terms will be applied for every nucleotide involved in a
stacked pair. This method is recognized by a capital 'D' in the provided parameter,
i.e.: --shapeMethod="D" is the default setting. The slope 'm' and the intercept 'b'
can be set to a non-default value if necessary, otherwise m=1.8 and b=-0.6. To
alter these parameters, e.g. m=1.9 and b=-0.7, use a parameter string like this:
--shapeMethod="Dm1.9b-0.7". You may also provide only one of the two parameters
like: --shapeMethod="Dm1.9" or --shapeMethod="Db-0.7".
'Z': Convert SHAPE reactivities to pseudo energies according to Zarringhalam
et al 2012. SHAPE reactivities will be converted to pairing probabilities by using
linear mapping. Aberration from the observed pairing probabilities will be
penalized during the folding recursion. The magnitude of the penalties can affected
by adjusting the factor beta (e.g. --shapeMethod="Zb0.8").
'W': Apply a given vector of perturbation energies to unpaired nucleotides
according to Washietl et al 2012.Perturbation vectors can be calculated by using
RNApvmin.
--shapeConversion=method
Select method for SHAPE reactivity conversion.
(default=`O')
This parameter is useful when dealing with the SHAPE incorporation according to
Zarringhalam et al. The following methods can be used to convert SHAPE reactivities
into the probability for a certain nucleotide to be unpaired.
'M': Use linear mapping according to Zarringhalam et al. 'C': Use a
cutoff-approach to divide into paired and unpaired nucleotides (e.g. "C0.25") 'S':
Skip the normalizing step since the input data already represents probabilities for
being unpaired rather than raw reactivity values 'L': Use a linear model to convert
the reactivity into a probability for being unpaired (e.g. "Ls0.68i0.2" to use a
slope of 0.68 and an intercept of 0.2) 'O': Use a linear model to convert the log
of the reactivity into a probability for being unpaired (e.g. "Os1.6i-2.29" to use
a slope of 1.6 and an intercept of -2.29)
Energy Parameters:
Energy parameter sets can be adapted or loaded from user-provided input files
-T, --temp=DOUBLE
Rescale energy parameters to a temperature of temp C. Default is 37C.
(default=`37.0')
-P, --paramFile=paramfile
Read energy parameters from paramfile, instead of using the default parameter set.
Different sets of energy parameters for RNA and DNA should accompany your
distribution. See the RNAlib documentation for details on the file format. The
placeholder file name 'DNA' can be used to load DNA parameters without the need to
actually specify any input file.
-4, --noTetra
Do not include special tabulated stabilizing energies for tri-, tetra- and hexaloop
hairpins.
(default=off)
Mostly for testing.
--salt=DOUBLE
Set salt concentration in molar (M). Default is 1.021M.
Model Details:
Tweak the energy model and pairing rules additionally using the following
parameters
-d, --dangles=INT
How to treat "dangling end" energies for bases adjacent to helices in free ends and
multi-loops.
(default=`2')
With -d1 only unpaired bases can participate in at most one dangling end. With -d2
this check is ignored, dangling energies will be added for the bases adjacent to a
helix on both sides in any case; this is the default for mfe and partition function
folding. The option -d0 ignores dangling ends altogether (mostly for debugging).
With -d3 mfe folding will allow coaxial stacking of adjacent helices in
multi-loops. At the moment the implementation will not allow coaxial stacking of
the two interior pairs in a loop of degree 3.
--nsp=STRING
Allow other pairs in addition to the usual AU,GC,and GU pairs.
Its argument is a comma separated list of additionally allowed pairs. If the first
character is a "-" then AB will imply that AB and BA are allowed pairs, e.g.
--nsp="-GA" will allow GA and AG pairs. Nonstandard pairs are given 0 stacking
energy.
-e, --energyModel=INT
Set energy model.
Rarely used option to fold sequences from the artificial ABCD... alphabet, where A
pairs B, C-D etc. Use the energy parameters for GC (-e 1) or AU (-e 2) pairs.
--logML
Recalculate energies of structures using a logarithmic energy function for
multi-loops before output.
(default=off)
This option does not effect structure generation, only the energies that are
printed out. Since logML lowers energies somewhat, some structures may be missing.
--cfactor=DOUBLE
Set the weight of the covariance term in the energy function
(default=`1.0')
--nfactor=DOUBLE
Set the penalty for non-compatible sequences in the covariance term of the energy
function
(default=`1.0')
-R, --ribosum_file=ribosumfile
use specified Ribosum Matrix instead of normal
energy model.
Matrixes to use should be 6x6 matrices, the order of the terms is 'AU', 'CG', 'GC',
'GU', 'UA', 'UG'.
-r, --ribosum_scoring
use ribosum scoring matrix. (default=off)
The matrix is chosen according to the minimal and maximal pairwise identities of
the sequences in the file.
--old use old energy evaluation, treating gaps as characters.
(default=off)
--helical-rise=FLOAT
Set the helical rise of the helix in units of Angstrom.
(default=`2.8')
Use with caution! This value will be re-set automatically to 3.4 in case DNA
parameters are loaded via -P DNA and no further value is provided.
--backbone-length=FLOAT
Set the average backbone length for looped regions in units of Angstrom.
(default=`6.0')
Use with caution! This value will be re-set automatically to 6.76 in case DNA
parameters are loaded via -P DNA and no further value is provided.
REFERENCES
If you use this program in your work you might want to cite:
R. Lorenz, S.H. Bernhart, C. Hoener zu Siederdissen, H. Tafer, C. Flamm, P.F. Stadler and
I.L. Hofacker (2011), "ViennaRNA Package 2.0", Algorithms for Molecular Biology: 6:26
I.L. Hofacker, W. Fontana, P.F. Stadler, S. Bonhoeffer, M. Tacker, P. Schuster (1994),
"Fast Folding and Comparison of RNA Secondary Structures", Monatshefte f. Chemie: 125, pp
167-188
R. Lorenz, I.L. Hofacker, P.F. Stadler (2016), "RNA folding with hard and soft
constraints", Algorithms for Molecular Biology 11:1 pp 1-13
The energy parameters are taken from:
D.H. Mathews, M.D. Disney, D. Matthew, J.L. Childs, S.J. Schroeder, J. Susan, M. Zuker,
D.H. Turner (2004), "Incorporating chemical modification constraints into a dynamic
programming algorithm for prediction of RNA secondary structure", Proc. Natl. Acad. Sci.
USA: 101, pp 7287-7292
D.H Turner, D.H. Mathews (2009), "NNDB: The nearest neighbor parameter database for
predicting stability of nucleic acid secondary structure", Nucleic Acids Research: 38, pp
280-282
AUTHOR
Ivo L Hofacker, Peter F Stadler, Ronny Lorenz
REPORTING BUGS
If in doubt our program is right, nature is at fault. Comments should be sent to
rna@tbi.univie.ac.at.