Ubuntu Manpage: RhumbSolve -- perform rhumb line calculations

Provided by: geographiclib-tools_2.4-1_amd64

NAME

       RhumbSolve -- perform rhumb line calculations

SYNOPSIS

       RhumbSolve [ -i | -L lat1 lon1 azi12 ] [ -e a f ] [ -u ] [ -d | -: ] [ -w ] [ -p prec ] [
       -E ] [ --comment-delimiter commentdelim ] [ --version | -h | --help ] [ --input-file
       infile | --input-string instring ] [ --line-separator linesep ] [ --output-file outfile ]

DESCRIPTION

The path with constant heading between two points on the ellipsoid at (lat1, lon1) and
(lat2, lon2) is called the rhumb line or loxodrome. Its length is s12 and the rhumb line
has a forward azimuth azi12 along its length. The quantity S12 is the area between the
rhumb line from point 1 to point 2 and the equator; i.e., it is the area, measured
counter-clockwise, of the geodesic quadrilateral with corners (lat1,lon1), (0,lon1),
(0,lon2), and (lat2,lon2). The longitude becomes indeterminate when a rhumb line passes
through a pole, and RhumbSolve reports NaNs for the longitude and the area in this case.

NOTE: the rhumb line is not the shortest path between two points; that is the geodesic and
it is calculated by GeodSolve(1).

RhumbSolve operates in one of three modes:

1. By default, RhumbSolve accepts lines on the standard input containing lat1 lon1 azi12
s12 and prints lat2 lon2 S12 on standard output. This is the direct calculation.

2. With the -i option, RhumbSolve performs the inverse calculation. It reads lines
containing lat1 lon1 lat2 lon2 and prints the values of azi12 s12 S12 for the
corresponding shortest rhumb lines.

3. Command line arguments -L lat1 lon1 azi12 specify a rhumb line. RhumbSolve then
accepts a sequence of s12 values (one per line) on standard input and prints lat2 lon2
S12 for each. This generates a sequence of points on a rhumb line.

OPTIONS

-i perform an inverse calculation (see 2 above).

-L lat1 lon1 azi12
line mode (see 3 above); generate a sequence of points along the rhumb line specified
by lat1 lon1 azi12. The -w flag can be used to swap the default order of the 2
geographic coordinates, provided that it appears before -L.

-e a f
specify the ellipsoid via the equatorial radius, a and the flattening, f. Setting f =
0 results in a sphere. Specify f < 0 for a prolate ellipsoid. A simple fraction,
e.g., 1/297, is allowed for f. By default, the WGS84 ellipsoid is used, a = 6378137
m, f = 1/298.257223563.

-u unroll the longitude. Normally, on output longitudes are reduced to lie in
[-180deg,180deg). However with this option, the returned longitude lon2 is "unrolled"
so that lon2 - lon1 indicates how often and in what sense the geodesic has encircled
the earth.

-d output angles as degrees, minutes, seconds instead of decimal degrees.

-: like -d, except use : as a separator instead of the d, ', and " delimiters.

-w on input and output, longitude precedes latitude (except that on input this can be
overridden by a hemisphere designator, N, S, E, W).

-p prec
set the output precision to prec (default 3); prec is the precision relative to 1 m.
See "PRECISION".

-E By default, the rhumb line calculations are carried out using series expansions valid
for |f| < 0.01. If -E is supplied, exact equations for the rhumb line are used and
the area integral is computed with an accurate fit based on this exact equations;
these are valid for arbitrary eccentricities.

--comment-delimiter commentdelim
set the comment delimiter to commentdelim (e.g., "#" or "//"). If set, the input
lines will be scanned for this delimiter and, if found, the delimiter and the rest of
the line will be removed prior to processing and subsequently appended to the output
line (separated by a space).

--version
print version and exit.

-h print usage and exit.

--help
print full documentation and exit.

--input-file infile
read input from the file infile instead of from standard input; a file name of "-"
stands for standard input.

--input-string instring
read input from the string instring instead of from standard input. All occurrences
of the line separator character (default is a semicolon) in instring are converted to
newlines before the reading begins.

--line-separator linesep
set the line separator character to linesep. By default this is a semicolon.

--output-file outfile
write output to the file outfile instead of to standard output; a file name of "-"
stands for standard output.

INPUT

       RhumbSolve measures all angles in degrees, all lengths (s12) in meters, and all areas
       (S12) in meters^2.  On input angles (latitude, longitude, azimuth, arc length) can be as
       decimal degrees or degrees, minutes, seconds.  For example, "40d30", "40d30'", "40:30",
       "40.5d", and 40.5 are all equivalent.  By default, latitude precedes longitude for each
       point (the -w flag switches this convention); however on input either may be given first
       by appending (or prepending) N or S to the latitude and E or W to the longitude.  Azimuths
       are measured clockwise from north; however this may be overridden with E or W.

       For details on the allowed formats for angles, see the "GEOGRAPHIC COORDINATES" section of
       GeoConvert(1).

PRECISION

       prec gives precision of the output with prec = 0 giving 1 m precision, prec = 3 giving 1
       mm precision, etc.  prec is the number of digits after the decimal point for lengths.  For
       decimal degrees, the number of digits after the decimal point is prec + 5.  For DMS
       (degree, minute, seconds) output, the number of digits after the decimal point in the
       seconds component is prec + 1.  The minimum value of prec is 0 and the maximum is 10.

ERRORS

       An illegal line of input will print an error message to standard output beginning with
       "ERROR:" and causes RhumbSolve to return an exit code of 1.  However, an error does not
       cause RhumbSolve to terminate; following lines will be converted.

ACCURACY

       The algorithm used by RhumbSolve uses either series expansions or (if -E is specified)
       exact formulas for computing the rhumb line and the area.  These series are formulas are
       accurate for |f| < 0.01 and the exact formulas apply for any value of the flattening.  The
       computation of rhumb lines and the area involves the ratio of differences and, for nearly
       east- or west-going rhumb lines, this might result in a large loss of accuracy.  However,
       this problem is avoided by the use of divided differences. For the WGS84 ellipsoid, the
       error is about 10 nanometers using either method.

EXAMPLES

       Route from JFK Airport to Singapore Changi Airport:

          echo 40:38:23N 073:46:44W 01:21:33N 103:59:22E |
          RhumbSolve -i -: -p 0

          103:34:58.2 18523563 45921660958919

       N.B. This is not the route typically taken by aircraft because it's considerably longer
       than the geodesic given by GeodSolve(1).

       Waypoints on the route at intervals of 2000km:

          for ((i = 0; i <= 20; i += 2)); do echo ${i}000000;done |
          RhumbSolve -L 40:38:23N 073:46:44W 103:34:58.2 -: -p 0

          40:38:23.0N 073:46:44.0W 0
          36:24:30.3N 051:28:26.4W 9817078307821
          32:10:26.8N 030:20:57.3W 18224745682005
          27:56:13.2N 010:10:54.2W 25358020327741
          23:41:50.1N 009:12:45.5E 31321269267102
          19:27:18.7N 027:59:22.1E 36195163180159
          15:12:40.2N 046:17:01.1E 40041499143669
          10:57:55.9N 064:12:52.8E 42906570007050
          06:43:07.3N 081:53:28.8E 44823504180200
          02:28:16.2N 099:24:54.5E 45813843358737
          01:46:36.0S 116:52:59.7E 45888525219677

AUTHOR

       RhumbSolve was written by Charles Karney.

HISTORY

       RhumbSolve was added to GeographicLib, <https://geographiclib.sourceforge.io>, in version
       1.37 and substantially rewritten in version 2.2.