Provided by: alsa-utils_1.2.12-1ubuntu1_amd64 
NAME
axfer-transfer - transferrer of audio data frame for sound devices and nodes.
SYNOPSIS
axfer transfer direction [ common-options ] [ backend-options ] [ filepath ]
axfer transfer direction [ common-options ] [ backend-options ] -I | --separate-channels
filepath ...
direction = capture | playback
common-options = ( read OPTIONS section )
backend-options = ( read OPTIONS section )
filepaths = ( read OPTIONS section )
DESCRIPTION
The transfer subcommand of axfer performs transmission of audio data frames for devices
available in supported backends. This program is essentially designed to use alsa-lib APIs
(libasound backend) to handle sound devices supported by Linux sound subsystem (ALSA).
OPTIONS
Direction
capture
Operates for capture transmission.
playback
Operates for playback transmission.
Filepath
Filepath is handled as a path relative to current working directory of run time if it's
not full path from root directory.
The standard input or output is used if filepath is not specified or given as '-' .
For playback transmission, container format of given filepath is detected automatically
and metadata is used for parameters of sample format, channels, rate, duration. If nothing
detected, content of given file path is handled as raw data. In this case, the parameters
should be indicated as options.
Multiple filepaths are allowed with -I | --separate-channels option. In this case,
standard input and output is not available. The same filepath is not allowed except for
paths listed below:
- /dev/null
- /dev/zero
- /dev/full
- /dev/random
- /dev/urandom
Common options
-h, --help
Print help messages and finish run time.
-q, --quiet
Quiet mode. Suppress messages (not sound :))
-v, --verbose
Verbose mode. Runtime dumps supplemental information according to the number of
this option given in command line.
-d, --duration=#
Interrupt after # seconds. A value of zero means infinity. The default is zero, so
if this option is omitted then the transmission process will run until it is
killed. Either -d or -s option is available exclusively.
-s, --samples=#
Interrupt after transmission of # number of data frames. A value of zero means
infinity. The default is zero, so if this options is omitted then the transmission
process will run until it is killed. Either -d or -s option is available
exclusively.
-f, --format=FORMAT
Indicate format of audio sample. This is required for capture transmission, or
playback transmission with files including raw audio data.
Available sample format is listed below:
- [S8|U8|S16|U16|S32|U32][_LE|_BE]
- [S24|U24][_LE|_BE]
- FLOAT[_LE|_BE]
- FLOAT64[_LE|_BE]
- IEC958_SUBFRAME[_LE|_BE]
- MU_LAW
- A_LAW
- [S20|U20][_LE|_BE]
- [S24|U24][_3LE|_3BE]
- [S20|U20][_3LE|_3BE]
- [S18|U18][_3LE|_3BE]
- DSD_U8
- DSD_[U16|U32][_LE|_BE]
If endian-ness is omitted, host endian-ness is used.
Some special formats are available:
- cd (16 bit little endian, 44100, stereo) [= -f S16_LE -c 2 -r 44100]
- cdr (16 bit big endian, 44100, stereo) [= -f S16_BE -c 2 -f 44100]
- dat (16 bit little endian, 48000, stereo) [= -f S16_LE -c 2 -r 48000]
If omitted, U8 is used as a default. Actual available formats are restricted by
each transmission backend.
Unavailable sample format is listed below. These format has size of data frame
unaligned to byte unit.
- IMA_ADPCM
- MPEG
- GSM
- SPECIAL
- G723_24
- G723_24_1B
- G723_40
- G723_40_1B
-c, --channels=#
Indicate the number of audio data samples per frame. This is required for capture
transmission, or playback transmission with files including raw audio data. The
value should be between 1 to 256 . If omitted, 1 is used as a default.
-r, --rate=#
Indicate the number of audio data frame per second. This is required for capture
transmission, or playback transmission with files including raw audio data. If the
value is less than 1000 , it's interpreted by kHz unit. The value should be between
2000 and 192000 . If omitted, 8000 is used as a default.
-t, --file-type=TYPE
Indicate the type of file. This is required for capture transmission. Available
types are listed below:
- wav: Microsoft/IBM RIFF/Wave format
- au, sparc: Sparc AU format
- voc: Creative Tech. voice format
- raw: raw data
When nothing is indicated, for capture transmission, the type is decided according
to suffix of filepath , and raw type is used for fallback.
-I, --separate-channels
Indicate this option when several files are going to be handled. For capture
transmission, if one filepath is given as filepath , a list of filepaths is
generated in a formula '<filepath>-<sequential number>[.suffix]'. The suffix is
omitted when raw format of container is used.
--dump-hw-params
Dump hardware parameters and finish run time if backend supports it.
--xfer-backend=BACKEND
Select backend of transmission from a list below. The default is libasound.
- libasound
- libffado (optional if compiled)
Backend options for libasound
-D, --device=NODE
This option is used to select PCM node in libasound configuration space. Available
nodes are listed by pcm operation of list subcommand.
-N, --nonblock
With this option, PCM substream is opened in non-blocking mode. When audio data
frame is not available in buffer of the PCM substream, I/O operation immediately
returns without blocking process. This option implicitly uses --waiter-type option
as well to prevent heavy consumption of CPU time.
-M, --mmap
With this option, audio data frame is processed directly in buffer of PCM substream
if selected node supports this operation. Without the option, temporary buffers are
used to copy audio data frame for buffer of PCM substream. This option implicitly
uses --waiter-type option as well to prevent heavy consumption of CPU time.
-F, --period-size=#
This option configures given value to period_size hardware parameter of PCM
substream. The parameter indicates the number of audio data frame per period in
buffer of the PCM substream. Actual number is decided as a result of interaction
between each implementation of PCM plugin chained from the selected PCM node, and
in-kernel driver or PCM I/O plugins.
Ideally, the same amount of audio data frame as the value should be handled in one
I/O operation. Actually, it is not, depending on implementation of the PCM plugins,
in-kernel driver, PCM I/O plugins and scheduling model. For 'hw' PCM plugin in
'irq' scheduling model, the value is used to decide intervals of hardware
interrupt, thus the same amount of audio data frame as the value is expected to be
available for one I/O operation.
--period-time=#
This option configures given value to period_time hardware parameter of PCM
substream. This option is similar to --period-size option, however its unit is
micro-second.
-B, --buffer-size=#
This option configures given value to buffer_size hardware parameter of PCM
substream. The parameter indicates the number of audio data frame in buffer of PCM
substream. Actual number is decided as a result of interaction between each
implementation of PCM plugin chained from the selected PCM node, and in-kernel
driver or PCM I/O plugins.
Ideally, this is multiples of the number of audio data frame per period, thus the
size of period. Actually, it is not, depending on implementation of the PCM
plugins, in-kernel driver and PCM I/O plugins.
--buffer-time=#
This option configures given value to buffer_time hardware parameter of PCM
substream. This option is similar to --buffer-size option, however its unit is
micro-second.
--waiter-type=TYPE
This option indicates the type of waiter for event notification. At present, four
types are available; default , select , poll and epoll . With default type,
'snd_pcm_wait()' is used. With select type, 'select(2)' system call is used. With
poll type, 'poll(2)' system call is used. With epoll type, Linux-specific
'epoll(7)' system call is used.
This option should correspond to one of --nonblock or --mmap options, or timer
value of --sched-model option. Neither this option nor --test-nowait is available
at the same time.
--sched-model=MODEL
This option selects scheduling model for process of this program. One of irq or
timer is available. In detail, please read 'SCHEDULING MODEL' section.
When nothing specified, irq model is used.
-A, --avail-min=#
This option configures given value to avail-min software parameter of PCM
substream. In blocking mode, the value is used as threshold of the number of
available audio data frames in buffer of PCM substream to wake up process blocked
by I/O operation. In non-blocking mode, any I/O operation returns -EAGAIN until the
available number of audio data frame reaches the threshold.
This option has an effect in cases neither --mmap nor timer value of --sched-model
option is used.
-R, --start-delay=#
This option configures given value to start_threshold software parameter of PCM
substream. The value is used as threshold to start PCM substream automatically. At
present, this option has an effect in cases neither --mmap nor timer value of
--sched-model option is used.
For playback transmission, when the number of accumulated audio data frame in
buffer of PCM substream to which this program writes out reaches the threshold, the
PCM substream starts automatically without an explicit call of snd_pcm_start() to
the PCM substream.
For capture transmission, this option is useless. The number of accumulated audio
data frame is not increased without an explicit call of snd_pcm_start() to the PCM
substream.
This option has an effect in cases neither --mmap nor timer value of --sched-model
option is used.
-T, --stop-delay=#
This option configures given value to stop_threshold software parameter of PCM
substream. The value is used as threshold to stop PCM substream automatically. At
present, this option has an effect in cases neither --mmap nor timer value of
--sched-model option is used.
For capture transmission, when the number of accumulated audio data frame in buffer
of PCM substream to which a driver or alsa-lib PCM plugins write reaches the
threshold, the PCM substream stops automatically without an explicit call of
snd_pcm_stop() to the PCM substream. This is a case that this program leaves the
audio data frames without reading for a while.
For playback transmission, when the number available audio data frame in buffer of
PCM substream from which a driver or alsa-lib PCM plugins read reaches the
threshold, the PCM substream stops automatically without an explicit call of
snd_pcm_stop() to the PCM substream. This is a case that this program leaves the
audio data frames without writing for a while.
This option has an effect in cases neither --mmap nor timer value of --sched-model
option is used.
--disable-resample
This option has an effect for 'plug' plugin in alsa-lib to suppress conversion of
sampling rate for audio data frame.
--disable-channels
This option has an effect for 'plug' plugin in alsa-lib to suppress conversion of
channels for audio data frame.
--disable-format
This option has an effect for 'plug' plugin in alsa-lib to suppress conversion of
sample format for audio data frame.
--disable-softvol
This option has an effect for 'softvol' plugin in alsa-lib to suppress conversion
of samples for audio data frame via additional control element.
--fatal-errors
This option suppresses recovery operation from XRUN state of running PCM substream,
then process of this program is going to finish as usual.
--test-nowait
This option disables any waiter for I/O event notification. I/O operations are
iterated till any of audio data frame is available. The option brings heavy load in
consumption of CPU time.
Backend options for libffado
This backend is automatically available when configure script detects
ffado_streaming_init() symbol in libffado shared object.
-p, --port=#
This option uses given value to decide which 1394 OHCI controller is used to
communicate. When Linux system has two 1394 OHCI controllers, 0 or 1 are available.
Neither this option nor -g is available at the same time. If nothing specified,
libffado performs to communicate to units on IEEE 1394 bus managed by all of 1394
OHCI controller available in Linux system.
-n, --node=#
This option uses given value to decide which unit is used to communicate. This
option requires -p option to indicate which 1394 OHCI controller is used to
communicate to the specified unit.
-g, --guid=HEXADECIMAL
This option uses given value to decide a target unit to communicate. The value
should be prefixed with '0x' and consists of hexadecimal literal letters (0-9, a-f,
A-F). Neither this option nor -p is available at the same time. If nothing
specified, libffado performs to communicate to units on IEEE 1394 bus managed by
all of 1394 OHCI controller available in Linux system.
--frames-per-period=#
This option uses given value to decide the number of audio data frame in one
read/write operation. The operation is blocked till the number of available audio
data frame exceeds the given value. As a default, 512 audio data frames is used.
--periods-per-buffer=#
This option uses given value to decide the size of intermediate buffer between this
program and libffado. As a default, 2 periods per buffer is used.
--slave
This option allows this program to run slave mode. In this mode, libffado adds unit
directory into configuration ROM of 1394 OHCI controller where Linux system runs.
The unit directory can be found by the other node on the same bus. Linux system
running on the node can transfer isochronous packet with audio data frame to the
unit. This program can receive the packet and demultiplex the audio data frame.
--snoop
This option allows this program to run snoop mode. In this mode, libffado listens
isochronous channels to which device transfers isochronous packet. When isochronous
communication starts by any unit on the same bus, the packets can be handled by
this program.
--sched-priority=#
This option executes pthread_setschedparam() in a call of ffado_streaming_init() to
configure scheduling policy and given value as its priority for threads related to
isochronous communication. The given value should be within RLIMIT_RTPRIO
parameter of process. Please read getrlimit(2) for details.
POSIX SIGNALS
During transmission, SIGINT and SIGTERM will close handled files and PCM substream to be
going to finish run time.
SIGTSTP will suspend PCM substream and SIGCONT will resume it. No XRUNs are expected. With
libffado backend, the suspend/resume is not supported and runtime is aborted immediately.
The other signals perform default behaviours.
EXAMPLES
$ axfer transfer playback -d 1 something
The above will transfer audio data frame in 'something' file for playback during 1 second.
The sample format is detected automatically as a result to parse 'something' as long as
it's compliant to one of Microsoft/IBM RIFF/Wave, Sparc AU, Creative Tech. voice formats.
If nothing detected, -r , -c and -f should be given, or -f should be given with special
format.
$ axfer transfer playback -r 22050 -c 1 -f S16_LE -t raw something
The above will transfer audio data frame in 'something' file including no information of
sample format, as sample format of 22050 Hz, monaural, signed 16 bit little endian PCM for
playback. The transmission continues till catching SIGINT from keyboard or SIGTERM by
kill(1) .
$ axfer transfer capture -d 10 -f cd something.wav
The above will transfer audio data frame to 'something.wav' file as sample format of 44.1
kHz, 2 channels, signed 16 bit little endian PCM, during 10 seconds. The file format is
Microsoft/IBM RIFF/Wave according to suffix of the given filepath .
$ axfer transfer capture -s 1024 -r 48000 -c 2 -f S32_BE -I -t au channels
The above will transfer audio data frame as sample format of 48.0 kHz, 2 channels, signed
32 bit big endian PCM for 1,024 number of data frames to files named 'channels-1.au' and
'channels-2.au'.
SCHEDULING MODEL
In a design of ALSA PCM core, runtime of PCM substream supports two modes; period-wakeup
and no-period-wakeup. These two modes are for different scheduling models.
IRQ-based scheduling model
As a default, period-wakeup mode is used. In this mode, in-kernel drivers should operate
hardware to generate periodical notification for transmission of audio data frame. The
interval of notification is equivalent to the same amount of audio data frame as one
period of buffer, against actual time.
In a handler assigned to the notification, a helper function of ALSA PCM core is called to
update a position to head of hardware transmission, then compare it with a position to
head of application operation to judge overrun/underrun (XRUN) and to wake up blocked
processes.
For this purpose, hardware IRQ of controller for serial audio bus such as Inter-IC sound
is typically used. In this case, the controller generates the IRQ according to
transmission on the serial audio bus. In the handler assigned to the IRQ, direct media
access (DMA) transmission is requested between dedicated host memory and device memory.
If target hardware doesn't support this kind of mechanism, the periodical notification
should be emulated by any timer; e.g. hrtimer, kernel timer. External PCM plugins
generated by PCM plugin SDK in alsa-lib should also emulate the above behaviour.
In this mode, PCM applications are programmed according to typical way of I/O operations.
They execute blocking system calls to read/write audio data frame in buffer of PCM
substream, or blocking system calls to wait until any audio data frame is available. In
axfer , this is called IRQ-based scheduling model and a default behaviour. Users can
explicitly configure this mode by usage of --sched-model option with irq value.
Timer-based scheduling model
The no-period-wakeup mode is an optional mode of runtime of PCM substream. The mode
assumes a specific feature of hardware and assist of in-kernel driver and PCM
applications. In this mode, in-kernel drivers don't operate hardware to generate
periodical notification for transmission of audio data frame. The hardware should
automatically continue transmission of audio data frame without periodical operation of
the drivers; e.g. according to auto-triggered DMA transmission, a chain of registered
descriptors.
In this mode, nothing wakes up blocked processes, therefore PCM applications should be
programmed without any blocking operation. For this reason, this mode is enabled when the
PCM applications explicitly configure hardware parameter to runtime of PCM substream, to
prevent disorder of existing applications. Additionally, nothing maintains timing for
transmission of audio data frame, therefore the PCM applications should voluntarily handle
any timer to queue audio data frame in buffer of the PCM substream for lapse of time.
Furthermore, instead of driver, the PCM application should call a helper function of ALSA
PCM core to update a position to head of hardware transmission and to check XRUN.
In axfer , this is called timer-based scheduling model and available as long as
hardware/driver assists no-period-wakeup runtime. Users should explicitly set this mode by
usage of --sched-model option with timer value.
In the scheduling model, PCM applications need to care of available space on PCM buffer by
lapse of time, typically by yielding CPU and wait for rescheduling. For the yielding,
timeout is calculated for preferable amount of PCM frames to process. This is convenient
to a kind of applications, like sound servers. when an I/O thread of the server wait for
the timeout, the other threads can process audio data frames for server clients.
Furthermore, with usage of rewinding/forwarding, applications can achieve low latency
between transmission position and handling position even if they uses large size of PCM
buffers.
Advantages and issues
Ideally, timer-based scheduling model has some advantages than IRQ-based scheduling model.
At first, no interrupt context runs for PCM substream. The PCM substream is handled in any
process context only. No need to care of race conditions between IRQ and process contexts.
This reduces some concerns for some developers of drivers and applications. Secondary, CPU
time is not used for handlers on the interrupt context. The CPU time can be dedicated for
the other tasks. This is good in a point of Time Sharing System. Thirdly, hardware is not
configured to generate interrupts. This is good in a point of reduction of overall power
consumption possibly.
In either scheduling model, the hardware should allow drivers to read the number of audio
data frame transferred between the dedicated memory and the device memory for audio serial
bus. However, in timer-based scheduling model, fine granularity and accuracy of the value
is important. Actually hardware performs transmission between dedicated memory and device
memory for a small batch of audio data frames or bytes. In a view of PCM applications, the
granularity in current transmission is required to decide correct timeout for each I/O
operation. As of Linux kernel v4.21, ALSA PCM interface between kernel/userspace has no
feature to report it.
COMPATIBILITY TO APLAY
The transfer subcommand of axfer is designed to keep compatibility to aplay(1). However
some options below are not compatible due to several technical reasons.
-I, --separate-channels
This option is supported just for files to store audio data frames corresponding to
each channel. In aplay(1) implementation, this option has an additional effect to
use PCM buffer aligned to non-interleaved order if a target device supports. As of
2018, PCM buffer of non-interleaved order is hardly used by sound devices.
-A, --avail-min=#
This option indicates threshold to wake up blocked process in a unit of audio data
frame. Against aplay(1) implementation, this option has no effect with --mmap
option as well as timer of --sched-model option.
-R, --start-delay=#
This option indicates threshold to start prepared PCM substream in a unit of audio
data frame. Against aplay(1) implementation, this option has no effect with --mmap
option as well as timer of --sched-model option.
-T, --stop-delay=#
This option indicates threshold to stop running PCM substream in a unit of audio
data frame. Against aplay(1) implementation, this option has no effect with --mmap
option as well as timer of --sched-model option.
--max-file-time=#
This option is unsupported. In aplay(1) implementation, the option has an effect
for capture transmission to save files up to the same number of data frames as the
given value by second unit, or the maximum number of data frames supported by used
file format. When reaching to the limitation, used file is closed, then new file is
opened and audio data frames are written. However, this option requires extra
handling of files and shall increase complexity of main loop of axfer.
--use-strftime=FORMAT
This option is unsupported. In aplay(1) implementation, the option has an effect
for capture transmission to generate file paths according to given format in which
some extra formats are available as well as formats supported by strftime(3).
However, this option requires extra string processing for file paths and it's
bothersome if written in C language.
--process-id-file=FILEPATH
This option is unsupported. In aplay(1) implementation, the option has an effect to
create a file for given value and write out process ID to it. This file allows
users to get process ID and send any POSIX signal to aplay process. However, this
idea has some troubles for file locking when multiple aplay processes run with the
same file.
-V, --vumeter=TYPE
This option is not supported at present. In aplay(1) implementation, this option
has an effect to occupy stdout with some terminal control characters and display
vumeter for monaural and stereo channels. However, some problems lay; this feature
is just for audio data frames with PCM format, this feature brings disorder of
terminal after aborting, stdout is not available for pipeline.
-i, --interactive
This option is not supported at present. In aplay(1) implementation, this option
has an effect to occupy stdin for key input and suspend/resume PCM substream
according to pushed enter key. However, this feature requires an additional input
handling in main loop and leave bothersome operation to maintain PCM substream.
-m, --chmap=CH1,CH2,...
ALSA PCM core and control core doesn't support this feature, therefore remapping
should be done in userspace. This brings overhead to align audio data frames,
especially for mmap operation. Furthermore, as of alsa-lib v1.1.8, some plugins
don't support this feature expectedly, thus this option is a lack of transparent
operation. At present, this option is not supported yet not to confuse users.
SIGTSTP, SIGCONT
This performs suspend/resume of PCM substream. In aplay(1) implementation, these
operations bring XRUN state to the substream, and suspend/resume is done in
interactive mode in the above. Some developers use the signal for recovery test
from XRUN. At present, no alternative is supported for the test.
SIGUSR1
This is not supported. In aplay(1) implementation, this signal is assigned to a
handler to close a current file to store audio data frame and open a new file to
continue processing. However, as well as --max-file-time option, this option should
increase complexity of main loop of axfer.
DESIGN
Modular structure
This program consists of three modules; xfer , mapper and container . Each module has an
abstraction layer to enable actual implementation.
-------- ---------- -------------
device <-> | xfer | <-> | mapper | <-> | container | <-> file
-------- ---------- -------------
libasound single wav
libffado multiple au
voc
raw
The xfer module performs actual transmission to devices and nodes. The module can have
several transmission backends. As a default backend, libasound backend is used to perform
transmission via alsa-lib APIs. The module allows each backend to parse own command line
options.
The container module performs to read/write audio data frame via descriptor for
file/stream of multimedia container or raw data. The module automatically detect type of
multimedia container and parse parameters in its metadata of data header. At present,
three types of multimedia containers are supported; Microsoft/IBM RIFF/Wave ( wav ), Sparc
AU ( au ) and Creative Technology voice ( voc ). Additionally, a special container is
prepared for raw audio data ( raw ).
The mapper module handles buffer layout and alignment for transmission of audio data
frame. The module has two implementations; single and multiple . The single backend uses
one container to construct the buffer. The multiple backend uses several containers to
construct it.
Care of copying audio data frame
Between the xfer module and mapper module, a pointer to buffer including audio data frames
is passed. This buffer has two shapes for interleaved and non-interleaved order. For the
former, the pointer points to one buffer. For the latter, the pointer points to an array
in which each element points to one buffer. Between the mapper module and container
module, a pointer to one buffer is passed because supported media containers including raw
type store audio data frames in interleaved order.
In passing audio data frame between the modules, axfer is programmed to avoid copying
between a buffer to another buffer as much as possible. For example, in some scenarios
below, no copying occurs between modules.
- xfer(mmap/interleaved), mapper(single), container(any)
- xfer(mmap/non-interleaved), mapper(multiple), containers(any)
Unit test
For each of the mapper and container module, unit test is available. To run the tests,
execute below command:
$ make test
Each test iterates writing to file and reading to the file for many times and it takes
long time to finish. Please take care of the execution time if running on any CI
environment.
SEE ALSO
axfer(1), axfer-list(1), alsamixer(1), amixer(1)
AUTHOR
Takashi Sakamoto <o-takashi@sakamocchi.jp>