Provided by: condor_23.6.2+dfsg-2_amd64 
NAME
condor_userprio - HTCondor Manual
Manage user priorities
SYNOPSIS
condor_userprio -help
condor_userprio [-name negotiatorname] [-pool centralmanagerhostname[:portnumber]] [Edit
option ] | [Display options [username] ] [-inputfile filename]
DESCRIPTION
condor_userprio either modifies priority-related information or displays priority-related
information. Displayed information comes from the accountant log, where the
condor_negotiator daemon stores historical usage information in the file at
$(SPOOL)/Accountantnew.log. Which fields are displayed changes based on command line
arguments. condor_userprio with no arguments, lists the active users along with their
priorities, in increasing priority order. The -all option can be used to display more
detailed information about each user, resulting in a rather wide display, and includes the
following columns:
Effective Priority
The effective priority value of the user, which is used to calculate the user's
share when allocating resources. A lower value means a higher priority, and the
minimum value (highest priority) is 0.5. The effective priority is calculated
by multiplying the real priority by the priority factor.
Real Priority
The value of the real priority of the user. This value follows the user's
resource usage.
Priority Factor
The system administrator can set this value for each user, thus controlling a
user's effective priority relative to other users. This can be used to create
different classes of users.
Res Used
The number of resources currently used.
Accumulated Usage
The accumulated number of resource-hours used by the user since the usage start
time.
Usage Start Time
The time since when usage has been recorded for the user. This time is set when
a user job runs for the first time. It is reset to the present time when the
usage for the user is reset.
Last Usage Time
The most recent time a resource usage has been recorded for the user.
By default only users for whom usage was recorded in the last 24 hours, or whose priority
is greater than the minimum are listed.
The -pool option can be used to contact a different central manager than the local one
(the default).
Options that do not begin with a - are treated as a username and results will restricted
to users that match the given name. More than one username can be specified.
For security purposes of authentication and authorization, specifying an Edit Option
requires the ADMINISTRATOR level of access.
OPTIONS
-help Display usage information and exit.
-name negotiatorname
When querying ads from the condor_collector, only retrieve ads that came from
the negotiator with the given name.
-pool centralmanagerhostname[:portnumber]
Contact the specified centralmanagerhostname with an optional port number,
instead of the local central manager. This can be used to check other pools.
NOTE: The host name (and optional port) specified refer to the host name (and
port) of the condor_negotiator to query for user priorities. This is slightly
different than most HTCondor tools that support a -pool option, and instead
expect the host name (and port) of the condor_collector.
-inputfile filename
Introduced for debugging purposes, read priority information from filename. The
contents of filename are expected to be the same as captured output from running
a condor_userprio -long command.
-delete username
(Edit option) Remove the specified username from HTCondor's accounting.
-resetall
(Edit option) Reset the accumulated usage of all the users to zero.
-resetusage username
(Edit option) Reset the accumulated usage of the user specified by username to
zero.
-setaccum username value
(Edit option) Set the accumulated usage of the user specified by username to the
specified floating point value.
-setbegin username value
(Edit option) Set the begin usage time of the user specified by username to the
specified value.
-setfactor username value
(Edit option) Set the priority factor of the user specified by username to the
specified value.
-setlast username value
(Edit option) Set the last usage time of the user specified by username to the
specified value.
-setprio username value
(Edit option) Set the real priority of the user specified by username to the
specified value.
-setfloor username value
(Edit option) Set the floor for the user specified by username to the specified
value. This value is the sum of the SlotWeight (See: SLOT_WEIGHT in
admin-manual/configuration-macros:condor_startd configuration file macros) of
all running jobs. By default, the slot weight of a running job is the number of
cores allocated to that job.
-setceil username value
(Edit option) Set the ceiling for the user specified by username to the
specified value. This value is the sum of the SlotWeight (See: SLOT_WEIGHT in
admin-manual/configuration-macros:condor_startd configuration file macros) of
all running jobs. By default, the slot weight of a running job is the number of
cores allocated to that job.
-activefrom month day year
(Display option) Display information for users who have some recorded
accumulated usage since the specified date.
-all (Display option) Display all available fields about each group or user.
-allusers
(Display option) Display information for all the users who have some recorded
accumulated usage.
-negotiator
(Display option) Force the query to come from the negotiator instead of the
collector.
-autoformat[:jlhVr,tng] attr1 [attr2 ...] or -af[:jlhVr,tng] attr1 [attr2 ...]
(Display option) Display attribute(s) or expression(s) formatted in a default
way according to attribute types. This option takes an arbitrary number of
attribute names as arguments, and prints out their values, with a space between
each value and a newline character after the last value. It is like the -format
option without format strings.
It is assumed that no attribute names begin with a dash character, so that the
next word that begins with dash is the start of the next option. The autoformat
option may be followed by a colon character and formatting qualifiers to deviate
the output formatting from the default:
j print the job ID as the first field,
l label each field,
h print column headings before the first line of output,
V use %V rather than %v for formatting (string values are quoted),
r print "raw", or unevaluated values,
, add a comma character after each field,
t add a tab character before each field instead of the default space character,
n add a newline character after each field,
g add a newline character between ClassAds, and suppress spaces before each
field.
Use -af:h to get tabular values with headings.
Use -af:lrng to get -long equivalent format.
The newline and comma characters may not be used together. The l and h
characters may not be used together.
-constraint <expr>
(Display option) To be used in conjunction with the -long -modular or the
-autoformat options. Displays users and groups that match the <expr>.
-debug[:<opts>]
(Display option) Without :<opts> specified, use configured debug level to send
debugging output to stderr. With :<opts> specified, these options are debug
levels that override any configured debug levels for this command's execution to
send debugging output to stderr.
-flat (Display option) Display information such that users within hierarchical groups
are not listed with their group.
-getreslist username
(Display option) Display all the resources currently allocated to the user
specified by username.
-grouporder
(Display option) Display submitter information with accounting group entries at
the top of the list, and in breadth-first order within the group hierarchy tree.
-grouprollup
(Display option) For hierarchical groups, the display shows sums as computed for
groups, and these sums include sub groups.
-hierarchical
(Display option) Display information such that users within hierarchical groups
are listed with their group.
-legacy
(Display option) For use with the -long option, displays attribute names and
values as a single ClassAd.
-long (Display option) A verbose output which displays entire ClassAds.
-modular
(Display option) Modifies the display when using the -long option, such that
attribute names and values are shown as distinct ClassAds.
-most (Display option) Display fields considered to be the most useful. This is the
default set of fields displayed.
-priority
(Display option) Display fields with user priority information.
-quotas
(Display option) Display fields relevant to hierarchical group quotas.
-usage (Display option) Display usage information for each group or user.
EXAMPLES
Example 1 Since the output varies due to command line arguments, here is an example of the
default output for a pool that does not use Hierarchical Group Quotas. This default output
is the same as given with the -most Display option.
Last Priority Update: 1/19 13:14
Effective Priority Res Total Usage Time Since
User Name Priority Factor In Use (wghted-hrs) Last Usage
---------------------- ------------ --------- ------ ------------ ----------
www-cndr@cs.wisc.edu 0.56 1.00 0 591998.44 0+16:30
joey@cs.wisc.edu 1.00 1.00 1 990.15 <now>
suzy@cs.wisc.edu 1.53 1.00 0 261.78 0+09:31
leon@cs.wisc.edu 1.63 1.00 2 12597.82 <now>
raj@cs.wisc.edu 3.34 1.00 0 8049.48 0+01:39
jose@cs.wisc.edu 3.62 1.00 4 58137.63 <now>
betsy@cs.wisc.edu 13.47 1.00 0 1475.31 0+22:46
petra@cs.wisc.edu 266.02 500.00 1 288082.03 <now>
carmen@cs.wisc.edu 329.87 10.00 634 2685305.25 <now>
carlos@cs.wisc.edu 687.36 10.00 0 76555.13 0+14:31
ali@proj1.wisc.edu 5000.00 10000.00 0 1315.56 0+03:33
apu@nnland.edu 5000.00 10000.00 0 482.63 0+09:56
pop@proj1.wisc.edu 26688.11 10000.00 1 49560.88 <now>
franz@cs.wisc.edu 29352.06 500.00 109 600277.88 <now>
martha@nnland.edu 58030.94 10000.00 0 48212.79 0+12:32
izzi@nnland.edu 62106.40 10000.00 0 6569.75 0+02:26
marta@cs.wisc.edu 62577.84 500.00 29 193706.30 <now>
kris@proj1.wisc.edu 100597.94 10000.00 0 20814.24 0+04:26
boss@proj1.wisc.edu 318229.25 10000.00 3 324680.47 <now>
---------------------- ------------ --------- ------ ------------ ----------
Number of users: 19 784 4969073.00 0+23:59
Example 2 This is an example of the default output for a pool that uses hierarchical
groups, and the groups accept surplus. This leads to a very wide display.
$ condor_userprio -pool crane.cs.wisc.edu -allusers
Last Priority Update: 1/19 13:18
Group Config Use Effective Priority Res Total Usage Time Since
User Name Quota Surplus Priority Factor In Use (wghted-hrs) Last Usage
------------------------------------ --------- ------- ------------ --------- ------ ------------ ----------
<none> 0.00 yes 1.00 0 6.78 9+03:52
johnsm@crane.cs.wisc.edu 0.50 1.00 0 6.62 9+19:42
John.Smith@crane.cs.wisc.edu 0.50 1.00 0 0.02 9+03:52
Sedge@crane.cs.wisc.edu 0.50 1.00 0 0.05 13+03:03
Duck@crane.cs.wisc.edu 0.50 1.00 0 0.02 31+00:28
other@crane.cs.wisc.edu 0.50 1.00 0 0.04 16+03:42
Duck 2.00 no 1.00 0 0.02 13+02:57
goose@crane.cs.wisc.edu 0.50 1.00 0 0.02 13+02:57
Sedge 4.00 no 1.00 0 0.17 9+03:07
johnsm@crane.cs.wisc.edu 0.50 1.00 0 0.13 9+03:08
Half@crane.cs.wisc.edu 0.50 1.00 0 0.02 31+00:02
John.Smith@crane.cs.wisc.edu 0.50 1.00 0 0.05 9+03:07
other@crane.cs.wisc.edu 0.50 1.00 0 0.01 28+19:34
------------------------------------ --------- ------- ------------ --------- ------ ------------ ----------
Number of users: 10 ByQuota 0 6.97
EXIT STATUS
condor_userprio will exit with a status value of 0 (zero) upon success, and it will exit
with the value 1 (one) upon failure.
AUTHOR
HTCondor Team
COPYRIGHT
1990-2024, Center for High Throughput Computing, Computer Sciences Department, University
of Wisconsin-Madison, Madison, WI, US. Licensed under the Apache License, Version 2.0.
Aug 03, 2024 CONDOR_USERPRIO(1)