Provided by: fp-compiler-3.2.2_3.2.2+dfsg-34_amd64 
NAME
fpc - Free Pascal Compiler (FPC) binary
SYNOPSIS
fpc [options] [sourcefile]
DESCRIPTION
This binary is the main binary of the Free Pascal Compiler (FPC) which is a Turbo Pascal
and Delphi (7.0) compatible standalone (non GCC frontend) multitarget Pascal compiler.
The compiler uses LD(1) and can use AS(1) (see parameter -Aas), but also has its own
binary object writer.
The current main targets are Go32V2 (Dos DJGPP extender), Freebsd, Linux, MacOS, MacOSX,
MorphOS, Netware, OS/2 and Win32. The other targets (M68K compilers for Atari and Amiga)
are either based on older versions of the compiler or are still in development.
This manpage is meant for quick-reference only. FPC comes with a great (2000+ pages)
manual, which is updated constantly, while this man page can be out of date.
Version number
Starting with release 1.0, a new versioning system has been implemented. If the last
number is even (1.0, 1.0.2), it is stable, and if the last number is odd it is a daily
changing development version.(1.0.5, 1.1) just like the linux kernel.
Version 0.99.5 however is a stable release. It was made before the even/odd version naming
system was introduced.
Usage
The compilation process is started by typing fpc followed by a sourcefile name (normally
with .pas or .pp extension). Before processing the actual processing of the source file,
fpc.cfg(5) the configuration file of the compiler is read which contains the location of
the RTL, other packages (FCL, FreeVision), and optionally default values for some
switches. See the separate manpage of fpc.cfg(5) for more information.
Options
General options
-h if you specify this option, the compiler outputs a list of all options, and exits
after that.
-? idem as -h, but waiting after every screenfull for the enter key.
-i This option tells the compiler to print the copyright information.
You can give it an option, as -ixxx where "xxx" can be one of the following:
D Returns the compiler date.
V Returns the compiler version.
SO Returns the compiler OS.
SP Returns the compiler processor.
TO Returns the target OS.
TP Returns the target Processor.
-l At the top print a line stating which program this is and its version.
-n Tells the compiler not to read the configuration file fpc.cfg(5)
Options for getting feedback
-vxxx Be verbose. "xxx" is a combination of the following:
e Tells the compiler to show only errors. This option is on by default.
i Tells the compiler to show some general information.
w Tells the compiler to issue warnings.
n Tells the compiler to issue notes.
h Tells the compiler to issue hints.
l Tells the compiler to show the line numbers as it processes a file. Numbers
are shown per 100.
u Tells the compiler to print the names of the files it opens.
t Tells the compiler to print the names of the files it tries to open.
p Tells the compiler to print the names of procedures and functions as it is
processing them.
c Tells the compiler to warn you when it processes a conditional.
m Tells the compiler to write which macros are defined.
d Tells the compiler to write other debugging info.
a Tells the compiler to write all possible info. (this is the same as
specifying all options)
0 Tells the compiler to write no messages. This is useful when you want to
override the default setting in the configuration file.
b Tells the compiler to show all procedure declarations if an overloaded
function error occurs.
x Tells the compiler to output some executable info (for Win32 platform only).
r Rhide/GCC compatibility mode: formats the error differently, so they are
understood by RHIDE.
Options concerning files and directories
-exxx tells the compiler that xxx is the directory where it can find the executables as
(the assembler) and ld (the linker).
-FD same as -e.
-Fexxx This option tells the compiler to write errors, etc. to the file xxx
-FExxx set the executable/unit output path to xxx
-Fixxx adds xxx to the path where the compiler searches for its include files.
-Flxxx Adds xxx to the library searching path, and is passe to the linker.
-FLxxx ( Linux only) Tells the compiler to use xxx as the dynamic linker. Default this is
/lib/ld-linux.so.2, or lib/ld-linux.so.1, depending on which one is found.
-Foxxx Adds xxx to the object file path. This path is used when looking for files that
need to be linked in.
-Frxxx tells the compiler that xxx contains the compiler messages. Default the compiler
has built-in messages. Specifying this option will override the default messages.
(useful if you want to use a language other than the default language).
-Fuxxx Adds xxx to the unit path. By default, the compiler only searches for units in the
current directory and the directory where the compiler itself resides. This option
tells the compiler also to look in the directory xxx
-FUxxx Tells the compiler to write units in directory xxx instead of the current
directory.
-Ixxx Add xxx to the include file search path. This path is used when looking for
include files.
Options controlling the kind of output for more information on these options, see also the
programmers manual.
-a Tells the compiler not to delete the assembler file. This also counts for the
(possibly) generated batch script.
-al Tells the compiler to include the sourcecode lines in the assembler file as
comments.
-an Tells the compiler to include node information in the generated assembler file.
This is mainly for use by the compiler developers.
-ap Tells the compiler to use pipes to communicate with the assembler.
-ar Tells the compiler to include register allocation/deallocation information.
-at Tells the compiler to include temporary register allocation/deallocation
information.
-Axxx specifies what kind of assembler should be generated . Here xxx is one of the
following :
AS A unix .o (object) file, using GNU AS
coff coff object file (go32) using internal writer.
default
Use the default writer for the current platform.
elf elf object file (linux, 32-bit only) using internal writer.
nasmcoff
a coff file using the nasm assembler.
nasmelf
a ELF32 file (LINUX only) using the nasm assembler.
nasmobj
a obj file using the nasm assembler.
masm An obj file using the Microsoft masm assembler.
pecoff pecoff object file (win32) using internal writer.
tasm An obj file using the Borland tasm assembler.
wasm An obj file using the Watcom assembler.
-Ccxxx set the default calling convention to XXX.
-CD Create dynamic library.
-Ce Compile using emulated floating point instructions.
-Cfxxx Set the used floating point instruction set to xxx.
-Cg Generate PIC code.
-Chxxx Reserves xxx bytes heap. xxx should be between 1024 and 67107840.
-Ci Generate Input/Output checking code.
-Cn Omit the linking stage.
-Co Generate Integer overflow checking code.
-CR Verify object call validity (method calls mustbe valid).
-Cr Generate Range checking code.
-Csxxx Set stack size to xxx bytes.
-Ct generate stack checking code.
-CX Create a smartlinked library.
-dxxx Define the symbol name xxx This can be used to conditionally compile parts of your
code.
-E Same as -Cn.
-g Generate debugging information for debugging with GDB
-gg idem as -g.
-gd generate debugging info for dbx.
-gh use the heaptrc unit (see the units part of the FPC manual).
-gl use the lineinfo unit for line information (see the units part of the FPC manual).
-gv Generate information for debugging with valgrind.
-gw Generate DWARF debugging information.
-Oxxx optimize the compiler's output; xxx can have one of the following values :
g optimize for size, try to generate smaller code.
G optimize for time, try to generate faster code (default).
r keep certain variables in registers (experimental, use with caution).
u uncertain optimizations
1 Level 1 optimizations (quick optimizations).
2 Level 2 optimizations (-O1 plus some slower optimizations).
3 Level 3 optimizations (-O2 plus -Ou).
pn Specify processor : n can be one of
1 optimize for 386/486
2 optimize for Pentium/PentiumMMX (tm)
3 optimizations for PentiumPro / P-II / Cyrix 6x86 / K6 (tm)
The exact effect of these effects can be found in the programmers part of the
manual.
-oxxx Tells the compiler to use xxx as the name of the output file (executable). Only
with programs.
-pg Generate profiler code for gprof.
-s Tells the compiler not to call the assembler and linker. Instead, the compiler
writes a script, PPAS.BAT under DOS, or ppas.sh under Linux, which can then be
executed to produce an executable.
-sh Tells the compiler to generate a script that can be used to assemble and link on
the host system, not on the target system. Use this when cross-compiling.
-sr Skip register allocation stage in compiler (use with -ar)
-st Tells the compiler to generate a script that can be used to assemble and link on
the target system, not on the host system. Use this when cross-compiling.
-Txxx Specifies the target operating system. xxx can be one of the following:
EMX OS/2 and DOS via the EMX extender.
FREEBSD
FreeBSD
GO32V2 DOS and version 2 of the DJ DELORIE extender.
LINUX Linux.
NETBSD Netbsd.
NETWARE
Novell Netware module (clib)
NETLIBC
Novell Netware module (libc)
OPENBSD
OpenBSD
OS2 OS/2 (native mode)
SunOS Solaris SunOS
WATCOM WatCOM dos extender
WDOSX WDosX Dos extender
WIN32 Windows 32 bit.
-uxxx undefine the symbol xxx if it is defined. This is the opposite of the -d option.
-Xx Executable options. These tell the compiler what kind of executable should be
generated. the parameter x can be one of the following:
c (Linux only, obsolete) Link with the C library. You should only use this
when you start to port Free Pascal to another operating system.
D Link with dynamic libraries (defines the FPC_LINK_DYNAMIC symbol)
d Don't use the standard library path. Use this when cross-compiling, to avoid
linking with the host OS libraries.
Pxxx Prepend the names of binutils (as, ld) with xxx. For use when cross-
compiling.
rxxx Set the library search path to xxx.
s Strip the symbols from the executable.
S Link with static libraries (defines the FPC_LINK_STATIC symbol)
t Link statically (passes -static to the linker)
X Link smart. Using this option sets the FPC_LINK_SMART symbol.
Options concerning the sources (language options) for more information on these options,
see also in the Programmers Manual
-Mmode Specify the language mode. mode can be one of the following:
delphi Delphi-compatibility mode. This loads the objpas unit, and switches on
ansistring mode ( -Sh ).
fpc Default mode.
gpc GNU pascal mode (does nothing at the moment)
macpas Mac pascal mode. This loads the macpas unit and switches on some Mac
extensions (mainly macros)
objfpc Object Pascal mode. This loads the objpas unit.
tp Turbo Pascal mode.
-Rxxx Specifies what assembler you use in your "asm" assembler code blocks. Here xxx is
one of the following:
att Asm blocks contain AT&T assembler.
intel Asm blocks contain Intel assembler.
default
Use default assembler for the selected platform.
-S2 Switch on Delphi 2 extensions.
-Sa Generate code for assertions.
-Sc Support C-style operators, i.e. *=, +=, /= and -=.
-Sd Tries to be Delphi compatible
-Se The compiler stops after the first error. Normally, the compiler tries to continue
compiling after an error, until 50 errors are reached, or a fatal error is reached,
and then it stops. With this switch, the compiler will stop after the first error.
-Sg Support the label and goto commands.
-Sh use ansistrings by default.
-SIxxx Specify the kind of interfaces. xxx can be one of the following:
COM use COM interfaces. (all interfaces descend from IUnknown)
CORBA use CORBA interfaces. (no inheritance is supposed)
-Si Support C++ style INLINE.
-Sm Support C-style macros.
-So Try to be Borland TP 7.0 compatible (no function overloading etc.).
-Sp Try to be GPC (GNU Pascal Compiler) compatible.
-Ss The name of constructors must be "init", and the name of destructors should be
"done".
-St Allow the "static" keyword in objects.
-Un Do not check the unit name. Normally, the unit name is the same as the filename.
This option allows both to be different.
-Ur Create a release unit. This sets a special flag in the unit, causing the compiler
not to look for sources.
-Us Compile a system unit. This option causes the compiler to define only some very
basic types.
SEE ALSO
fpc.cfg(5) ppdep(1) ppudump(1) ppumove(1) ptop(1) h2pas(1) ld(1) as(1)