Provided by: gccgo-go_1.23~2_amd64 
NAME
go-build - compile the packages named by the import paths
SYNOPSIS
go build [-o output] [build flags] [packages]
DESCRIPTION
Build compiles the packages named by the import paths, along with their dependencies, but
it does not install the results.
If the arguments to build are a list of .go files from a single directory, build treats
them as a list of source files specifying a single package.
When compiling packages, build ignores files that end in ‘_test.go’.
When compiling a single main package, build writes the resulting executable to an output
file named after the first source file (‘go build ed.go rx.go’ writes ‘ed’ or ‘ed.exe’) or
the source code directory (‘go build unix/sam’ writes ‘sam’ or ‘sam.exe’). The ‘.exe’
suffix is added when writing a Windows executable.
When compiling multiple packages or a single non-main package, build compiles the packages
but discards the resulting object, serving only as a check that the packages can be built.
The -o flag forces build to write the resulting executable or object to the named output
file or directory, instead of the default behavior described in the last two paragraphs.
If the named output is an existing directory or ends with a slash or backslash, then any
resulting executables will be written to that directory.
The -i flag installs the packages that are dependencies of the target.
The -i flag is deprecated. Compiled packages are cached automatically.
OPTIONS
The build flags are shared by the build, clean, get, install, list, run, and test
commands:
-a force rebuilding of packages that are already up-to-date.
-n print the commands but do not run them.
-p n the number of programs, such as build commands or test binaries, that can be run in
parallel.
The default is GOMAXPROCS, normally the number of CPUs available.
-race enable data race detection.
Supported only on linux/amd64, freebsd/amd64, darwin/amd64, darwin/arm64,
windows/amd64, linux/ppc64le and linux/arm64 (only for 48-bit VMA).
-msan enable interoperation with memory sanitizer. Supported only on linux/amd64,
linux/arm64 and only with Clang/LLVM as the host C compiler. On linux/arm64, pie
build mode will be used.
-asan enable interoperation with address sanitizer. Supported only on linux/arm64,
linux/amd64. Supported only on linux/amd64 or linux/arm64 and only with GCC 7 and
higher or Clang/LLVM 9 and higher.
-v print the names of packages as they are compiled.
-work print the name of the temporary work directory and do not delete it when exiting.
-x print the commands.
-asmflags '[pattern=]arg list'
arguments to pass on each go tool asm invocation.
-buildmode mode
build mode to use. See ‘go help buildmode’ for more.
-buildvcs
Whether to stamp binaries with version control information. By default, version
control information is stamped into a binary if the main package and the main
module containing it are in the repository containing the current directory (if
there is a repository). Use -buildvcs=false to omit version control information.
-compiler name
name of compiler to use, as in runtime.Compiler (gccgo or gc)
-gccgoflags 'arg list'
arguments to pass on each gccgo compiler/linker invocation
-gcflags 'arg list'
arguments to pass on each go tool compile invocation.
-installsuffix suffix
a suffix to use in the name of the package installation directory, in order to keep
output separate from default builds. If using the -race flag, the install suffix
is automatically set to race or, if set explicitly, has _race appended to it.
Likewise for the -msan and -asan flag. Using a -buildmode option that requires non-
default compile flags has a similar effect.
-ldflags 'flag list'
arguments to pass on each go tool link invocation.
-linkshared
build code that will be linked against shared libraries previously created with
-buildmode=shared.
-mod mode
module download mode to use: readonly, vendor, or mod. By default, if a vendor
directory is present and the go version in go.mod is 1.14 or higher, the go command
acts as if -mod=vendor were set. Otherwise, the go command acts as if
-mod=readonly were set. See https://golang.org/ref/mod#build-commands for details.
-modcacherw
leave newly-created directories in the module cache read-write instead of making
them read-only.
-modfile file
in module aware mode, read (and possibly write) an alternate go.mod file instead of
the one in the module root directory. A file named "go.mod" must still be present
in order to determine the module root directory, but it is not accessed. When
-modfile is specified, an alternate go.sum file is also used: its path is derived
from the -modfile flag by trimming the ".mod" extension and appending ".sum".
-overlay file
read a JSON config file that provides an overlay for build operations. The file is
a JSON struct with a single field, named ‘Replace’, that maps each disk file path
(a string) to its backing file path, so that a build will run as if the disk file
path exists with the contents given by the backing file paths, or as if the disk
file path does not exist if its backing file path is empty. Support for the
-overlay flag has some limitations: importantly, cgo files included from outside
the include path must be in the same directory as the Go package they are included
from, and overlays will not appear when binaries and tests are run through go run
and go test respectively.
-pkgdir dir
install and load all packages from dir instead of the usual locations. For
example, when building with a non-standard configuration, use -pkgdir to keep
generated packages in a separate location.
-tags tag,list
a comma-separated list of additional build tags to consider satisfied during the
build. For more information about build tags, see ‘go help buildconstraint’.
(Earlier versions of Go used a space-separated list, and that form is deprecated
but still recognized.)
-trimpath
remove all file system paths from the resulting executable. Instead of absolute
file system paths, the recorded file names will begin either a module path@version
(when using modules), or a plain import path (when using the standard library, or
GOPATH).
-toolexec 'cmd args'
a program to use to invoke toolchain programs like vet and asm. For example,
instead of running asm, the go command will run ‘cmd args /path/to/asm <arguments
for asm>’.
The TOOLEXEC_IMPORTPATH environment variable will be set, matching ‘go list -f
{{.ImportPath}}’ for the package being built.
The -asmflags, -gccgoflags, -gcflags, and -ldflags flags accept a space-separated list of
arguments to pass to an underlying tool during the build. To embed spaces in an element in
the list, surround it with either single or double quotes. The argument list may be
preceded by a package pattern and an equal sign, which restricts the use of that argument
list to the building of packages matching that pattern (see ‘go help packages’ for a
description of package patterns). Without a pattern, the argument list applies only to the
packages named on the command line. The flags may be repeated with different patterns in
order to specify different arguments for different sets of packages. If a package matches
patterns given in multiple flags, the latest match on the command line wins. For example,
‘go build -gcflags=-S fmt’ prints the disassembly only for package fmt, while ‘go build
-gcflags=all=-S fmt’ prints the disassembly for fmt and all its dependencies.
For more about specifying packages, see go-packages(7).
For more about where packages and binaries are installed, see go-gopath(1).
For more about calling between Go and C/C++, run ‘go help c’.
Note: Build adheres to certain conventions such as those described by ‘go help gopath’.
Not all projects can follow these conventions, however. Installations that have their own
conventions or that use a separate software build system may choose to use lower-level
invocations such as ‘go tool compile’ and ‘go tool link’ to avoid some of the overheads
and design decisions of the build tool.
SEE ALSO
go-install(1), go-get(1), go-clean(1).
AUTHOR
This manual page was written by Michael Stapelberg <stapelberg@debian.org> and is
maintained by the Debian Go Compiler Team <team+go-compiler@tracker.debian.org> based on
the output of ‘go help build’ for the Debian project (and may be used by others).
2022-08-02 GO-BUILD(1)