Provided by: logstalgia_1.1.4-1build3_amd64 
NAME
Logstalgia - a web server access log visualization tool
SYNOPSIS
logstalgia [options] logfile
DESCRIPTION
logstalgia is a visualization tool that replays or streams web server access logs as a
retro arcade game simulation.
REQUIREMENTS
logstalgia's display is rendered using OpenGL and requires a 3D accelerated video card to
run.
Logstalgia supports several standardized access.log formats used by web servers such as
Apache and Nginx (see 'SUPPORTED LOG FORMATS' below).
As logstalgia is designed to playback logs in real time you will need a log from a fairly
busy webserver to achieve interesting results (eg 100s of requests each minute).
OPTIONS
-f Fullscreen.
-WIDTHxHEIGHT
Set the window size. If -f is also supplied, will attempt to set the video mode to
this also. Add ! to make the window non-resizable.
--screen SCREEN
Set the number of the screen to display on.
--high-dpi
Request a high DPI display when creating the window.
On some platforms such as MacOS, the window resolution is specified in points
instead of pixels. The --high-dpi flag may be required to access some higher
resolutions.
E.g. requesting a high DPI 800x600 window may produce a window that is 1600x1200
pixels.
--window-position XxY
Initial window position on your desktop which may be made up of multiple monitors.
This will override the screen setting so don't specify both.
--frameless
Frameless window.
--title TITLE
Set a title.
-b, --background
Background colour in hex.
-x --full-hostnames
Show full request ip/hostname.
-s, --simulation-speed
Simulation speed. Defaults to 1 (1 second-per-second).
-p, --pitch-speed
Speed balls travel across the screen (defaults to 0.15).
-u, --update-rate
Page Summary update speed. Defaults to 5 (5 seconds).
-g name,(HOST|URI|CODE)=regex[,SEP=chars][,MAX=n][,ABBR=n],percent[,colour]
Creates a new named summarizer group for requests for which a specified attribute
(HOST, URI or response CODE) matches a regular expression. Percent specifies a
vertical percentage of screen to use.
SEP=chars can specify a list of separator characters (e.g. /) to split on. The
default separator is /.
MAX=n specifies the max depth into the path to be displayed. (e.g. MAX=1 would show
only root directory names of paths). By default there is 0 (no limit).
ABBR=n specifies the minimum depth at which to allow partially abbreviated strings.
The default is 0 (allow). -1 to disallow.
A colour may optionally be supplied in hexadecimal format (eg FF0000 for red) which
will be applied to all labels and request balls matched to the group.
Examples:
-g "HTML,URI=html?$,30"
-g "Lan,HOST=^192,30"
-g "Success,CODE=^[23],30"
If no groups are specified, the default groups are Images (image files), CSS (.css
files) and Scripts (.js files).
If there is enough space remaining a catch-all group 'Misc' will appear as the last
group.
--address-separators CHARS
List of address separator characters. Defaults to '.:'.
--address-max-depth DEPTH
Maximum depth to display in address summarizer. 0 for no maximum.
--address-abbr-depth DEPTH
Minimum abbreviation depth of address summarizer. 0 to always allow abbreviations,
-1 to never abbreviate.
--path-separators CHARS
Default list of path separator characters. Defaults to /.
--path-max-depth DEPTH
Default maximum path depth shown in the summarizer. 0 for no maximum.
--path-abbr-depth DEPTH
Default minimum path abbreviation depth. 0 to always allow abbreviations, -1 to
never abbreviate.
--paddle-mode MODE
Paddle mode (pid, vhost, single).
vhost - separate paddle for each virtual host in the log file.
pid - separate paddle for each process id in the log file.
single - single paddle (the default).
--paddle-position POSITION
Paddle position as a fraction of the view width (0.25 - 0.75).
--display-fields REQUEST_FIELDS
List of one or more request fields that are shown when the user hovers the mouse
over an individual request:
path - the path of the resource requested
hostname - hostname or IP address
response_size - size of the response in bytes
response_code - response code
method - method
protocol - protocol
timestamp - timestamp of request
referrer - referrer URL of the request
user_agent - user agent
vhost - virtual host name
log_entry - full log entry
pid - the pid of the instance that handled the request
Separate multiple fields with commas (eg "path,hostname")
--sync Read from STDIN, ignoring entries before the current time.
--from, --to "YYYY-MM-DD hh:mm:ss +tz"
Show entries from a specific time period.
If a time zone offset isn't specified the local time zone is used.
Example accepted formats:
"2012-06-30"
"2012-06-30 12:00"
"2012-06-30 12:00:00 +12"
--start-position POSITION
Begin at some position in the log file (between 0.0 and 1.0).
--stop-position POSITION
Stop at some position.
--no-bounce
No bouncing.
--hide-response-code
Hide response code.
--hide-paddle
Hide paddle.
--hide-paddle-tokens
Hide paddle tokens shown in multi-paddle modes.
--hide-url-prefix
Hide URL protocol and hostname prefix of requests.
--disable-auto-skip
Disable automatic skipping of empty time periods.
--disable-progress
Disable the progress bar.
--disable-glow
Disable the glow effect.
--font-size SIZE
Font size.
--glow-duration
Duration of the glow (between 0.0 and 1.0).
--glow-multiplier
Adjust the amount of glow.
--glow-intensity
Intensity of the glow.
-o, --output-ppm-stream FILE
Write frames as PPM to a file ('-' for STDOUT).
-r, --output-framerate FPS
Framerate of output (used with --output-ppm-stream).
--load-config CONFIG_FILE
Load a config file.
--save-config CONFIG_FILE
Save a config file with the current options.
--detect-changes
Automatically reload config file when it is modified.
logfile
The path to the access log file to read or '-' if you wish to supply log entries
via STDIN.
EXAMPLES
Watch an example access.log using the default settings:
logstalgia /usr/share/logstalgia/example.log
Watch the live access.log, starting from the most recent batch of entries in the log
(requires tail). Note than '-' at the end is required for logstalgia to know it needs to
read from STDIN:
tail -f /var/log/apache2/access.log | logstalgia -
To follow the log in real time, use the --sync option. This will start reading from the
next entry received on STDIN:
tail -f /var/log/apache2/access.log | logstalgia --sync
Watch a remote access.log via ssh:
ssh user@example.com tail -f /var/log/apache2/access.log | logstalgia --sync
SUPPORTED LOG FORMATS
Logstalgia supports the following standardized log formats used by web servers like Apache
and Nginx:
NCSA Common Log Format (CLF)
"%h %l %u %t \"%r\" %>s %b"
NCSA Common Log Format with Virtual Host
"%v %h %l %u %t \"%r\" %>s %b"
NCSA extended/combined log format
"%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-agent}i\""
NCSA extended/combined log format with Virtual Host
"%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-agent}i\""
The process id (%P), or some other identifier, may be included as an additional field at
the end of the entry. This can be used with '--paddle-mode pid' where a separate paddle
will be created for each unique value in this field.
CUSTOM LOG FORMAT
Logstalgia now supports a pipe ('|') delimited custom log file format:
timestamp - unix timestamp of the request date.
hostname - hostname of the request
path - path requested
response_code - the response code from the webserver (eg 200)
response_size - the size of the response in bytes
The following are optional:
success - 1 or 0 to indicate if successful
response_colour - response colour in hexidecial (#FFFFFF) format
referrer url - the referrer url
user agent - the user agent
virtual host - the virtual host (to use with --paddle-mode vhost)
pid - process id or some other identifier (--paddle-mode pid)
If success or response_colour are not provided, they will be derived from the
response_code using the normal HTTP conventions (code < 400 = success).
RECORDING VIDEOS
See the guide on the homepage for examples of recording videos with Logstalgia:
https://github.com/acaudwell/Logstalgia/wiki/Videos
INTERFACE
The time shown in the top left of the screen is set initially from the first log entry
read and is incremented according to the simulation speed (-s).
The counter in the bottom right hand corner shows the number of requests displayed since
the start of the current session.
Pressing space at any time will pause/unpause the simulation. While paused you may use the
mouse to inspect the detail of individual requests.
You can click on summarizer group entries on the left and right side of the screen to
filter to requests matching that entry. Click on the filter description to remove the
filter.
Interactive keyboard commands:
(q) Debug Information
(c) Displays Logstalgia logo
(n) Jump forward in time to next log entry.
(+-) Adjust simulation speed.
(<>) Adjust pitch speed.
(F5) Reload config
(F11) Window frame toggle
(F12) Screenshot
(Alt+Enter) Fullscreen toggle
(Ctrl+S) Save config
(Home/End) Adjust address summarizer maximum depth
(Page Up/Down) Adjust group summarizer maximum depth
(Ctrl+Home/End) Adjust address summarizer abbreviation depth
(Ctrl+Page Up/Down) Adjust group summarizer abbreviation depth
(ESC) Quit
AUTHOR
Written by Andrew Caudwell
Project Homepage: http://logstalgia.io
COPYRIGHT
Copyright (C) 2008 Andrew Caudwell (acaudwell@gmail.com)
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version
3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
ACKNOWLEDGEMENTS
Catalyst IT (catalyst.net.nz)
For supporting the development and promotion of Logstalgia!
Logstalgia(1)