Provided by: sumo_1.18.0+dfsg-4_amd64 
NAME
Eclipse - Road network importer / builder for the traffic simulation SUMO
SYNOPSIS
netconvert [OPTION]*
DESCRIPTION
Eclipse SUMO netconvert Version 1.18.0
Copyright (C) 2001-2023 German Aerospace Center (DLR) and others;
https://sumo.dlr.de
Network importer / builder for the microscopic, multi-modal traffic simulation
SUMO.
Configuration Options:
-c, --configuration-file FILE
Loads the named config on startup
-C, --save-configuration FILE
Saves current configuration into FILE
--save-configuration.relative
Enforce relative paths when saving the configuration
--save-template FILE
Saves a configuration template (empty) into FILE
--save-schema FILE
Saves the configuration schema into FILE
--save-commented
Adds comments to saved template, configuration, or schema
Input Options:
-s, --sumo-net-file FILE
Read SUMO-net from FILE
-n, --node-files FILE
Read XML-node defs from FILE
-e, --edge-files FILE
Read XML-edge defs from FILE
-x, --connection-files FILE
Read XML-connection defs from FILE
-i, --tllogic-files FILE
Read XML-traffic light defs from FILE
-t, --type-files FILE
Read XML-type defs from FILE
--ptstop-files FILE
Reads public transport stops from FILE
--ptline-files FILE
Reads public transport lines from FILE
--polygon-files FILE
Reads polygons from FILE for embedding in network where applicable
--shapefile-prefix FILE
Read shapefiles (ArcView, Tiger, ...) from files starting with 'FILE'
--dlr-navteq-prefix FILE
Read converted Navteq GDF data (unsplitted Elmar-network) from path 'FILE'
--osm-files FILE
Read OSM-network from path 'FILE(s)'
--opendrive-files FILE
Read OpenDRIVE-network from FILE
--visum-file FILE
Read VISUM-net from FILE
--vissim-file FILE
Read VISSIM-net from FILE
--robocup-dir FILE
Read RoboCup-net from DIR
--matsim-files FILE
Read MATsim-net from FILE
--itsumo-files FILE
Read ITSUMO-net from FILE
--heightmap.shapefiles FILE
Read heightmap from ArcGIS shapefile
--heightmap.geotiff FILE
Read heightmap from GeoTIFF
Output Options:
--write-license
Include license info into every output file
--output-prefix STR
Prefix which is applied to all output files. The special string 'TIME' is replaced
by the current time.
--precision INT
Defines the number of digits after the comma for floating point output
--precision.geo INT
Defines the number of digits after the comma for lon,lat output
-H, --human-readable-time
Write time values as hour:minute:second or day:hour:minute:second rather than
seconds
-o, --output-file FILE
The generated net will be written to FILE
-p, --plain-output-prefix FILE
Prefix of files to write plain xml nodes, edges and connections to
--plain-output.lanes
Write all lanes and their attributes even when they are not customized
--junctions.join-output FILE
Writes information about joined junctions to FILE (can be loaded as additional
node-file to reproduce joins
--prefix STR
Defines a prefix for edge and junction names
--amitran-output FILE
The generated net will be written to FILE using Amitran format
--matsim-output FILE
The generated net will be written to FILE using MATsim format
--opendrive-output FILE
The generated net will be written to FILE using OpenDRIVE format
--dlr-navteq-output FILE
The generated net will be written to dlr-navteq files with the given PREFIX
--dlr-navteq.precision INT
The network coordinates are written with the specified level of output precision
--output.street-names
Street names will be included in the output (if available)
--output.original-names
Writes original names, if given, as parameter
--street-sign-output FILE
Writes street signs as POIs to FILE
--ptstop-output FILE
Writes public transport stops to FILE
--ptline-output FILE
Writes public transport lines to FILE
--ptline-clean-up
Clean-up pt stops that are not served by any line
--parking-output FILE
Writes parking areas to FILE
--railway.topology.output FILE
Analyze topology of the railway network
--polygon-output FILE
Write shapes that are embedded in the network input and that are not supported by
polyconvert (OpenDRIVE)
--opendrive-output.straight-threshold FLOAT
Builds parameterized curves whenever the angular change between straight segments
exceeds FLOAT degrees
--opendrive-output.lefthand-left
Write lanes in lefthand networks on the left side (positive indices)
--opendrive-output.shape-match-dist FLOAT
Match loaded shapes to the closest edge within FLOAT and export as road objects
Projection Options:
--simple-projection
Uses a simple method for projection
--proj.scale FLOAT
Scaling factor for input coordinates
--proj.rotate FLOAT
Rotation (clockwise degrees) for input coordinates
--proj.utm
Determine the UTM zone (for a universal transversal mercator projection based on
the WGS84 ellipsoid)
--proj.dhdn
Determine the DHDN zone (for a transversal mercator projection based on the bessel
ellipsoid, "Gauss-Krueger")
--proj STR
Uses STR as proj.4 definition for projection
--proj.inverse
Inverses projection
--proj.dhdnutm
Convert from Gauss-Krueger to UTM
--proj.plain-geo
Write geo coordinates in plain-xml
Processing Options:
--speed-in-kmh
vmax is parsed as given in km/h
--construction-date STR
Use YYYY-MM-DD date to determine the readiness of features under construction
--flatten
Remove all z-data
--plain.extend-edge-shape
If edge shapes do not end at the node positions, extend them
--numerical-ids
Remaps alphanumerical IDs of nodes and edges to ensure that all IDs are integers
--numerical-ids.node-start INT
Remaps IDs of nodes to integers starting at INT
--numerical-ids.edge-start INT
Remaps IDs of edges to integers starting at INT
--reserved-ids FILE
Ensures that generated ids do not included any of the typed IDs from FILE (sumo-gui
selection file format)
--dismiss-vclasses
Removes vehicle class restrictions from imported edges
--geometry.split
Splits edges across geometry nodes
-R, --geometry.remove
Replace nodes which only define edge geometry by geometry points (joins edges)
--geometry.remove.keep-edges.explicit STR[]
Ensure that the given list of edges is not modified
--geometry.remove.keep-edges.input-file FILE
Ensure that the edges in FILE are not modified (Each id on a single line. Selection
files from sumo-gui are also supported)
--geometry.remove.keep-ptstops
Ensure that edges with public transport stops are not modified
--geometry.remove.min-length FLOAT
Allow merging edges with differing attributes when their length is below min-length
--geometry.remove.width-tolerance FLOAT
Allow merging edges with differing lane widths if the difference is below FLOAT
--geometry.remove.max-junction-size FLOAT
Prevent removal of junctions with a size above FLOAT as defined by custom edge
endpoints
--geometry.max-segment-length FLOAT
splits geometry to restrict segment length
--geometry.min-dist FLOAT
reduces too similar geometry points
--geometry.max-angle FLOAT
Warn about edge geometries with an angle above DEGREES in successive segments
--geometry.min-radius FLOAT
Warn about edge geometries with a turning radius less than METERS at the start or
end
--geometry.min-radius.fix
Straighten edge geometries to avoid turning radii less than geometry.min-radius
--geometry.min-radius.fix.railways
Straighten edge geometries to avoid turning radii less than geometry.min-radius
(only railways)
--geometry.junction-mismatch-threshold FLOAT
Warn if the junction shape is to far away from the original node position
--geometry.check-overlap FLOAT
Warn if edges overlap by more than the given threshold value
--geometry.check-overlap.vertical-threshold FLOAT
Ignore overlapping edges if they are separated vertically by the given threshold.
--geometry.avoid-overlap
Modify edge geometries to avoid overlap at junctions
--join-lanes
join adjacent lanes that have the same permissions and which do not admit
lane-changing (sidewalks and disallowed lanes)
--ptline.match-dist FLOAT
Matches stops outside the road network to the referencing pt line when below the
given distance
--ptstop-output.no-bidi
Skips automatic generation of stops on the bidi-edge of a loaded stop
--geometry.max-grade FLOAT
Warn about edge geometries with a grade in % above FLOAT.
--geometry.max-grade.fix
Smooth edge geometries with a grade above the warning threshold.
--offset.disable-normalization
Turn off normalizing node positions
--offset.x FLOAT
Adds FLOAT to net x-positions
--offset.y FLOAT
Adds FLOAT to net y-positions
--offset.z FLOAT
Adds FLOAT to net z-positions
--flip-y-axis
Flips the y-coordinate along zero
--roundabouts.guess
Enable roundabout-guessing
--roundabouts.visibility-distance FLOAT
Default visibility when approaching a roundabout
--opposites.guess
Enable guessing of opposite direction lanes usable for overtaking
--opposites.guess.fix-lengths
Ensure that opposite edges have the same length
--fringe.guess
Enable guessing of network fringe nodes
--fringe.guess.speed-threshold FLOAT
Guess disconnected edges above the given speed as outer fringe
--lefthand
Assumes left-hand traffic on the network
--edges.join
Merges edges which connect the same nodes and are close to each other (recommended
for VISSIM import)
--speed.offset FLOAT
Modifies all edge speeds by adding FLOAT
--speed.factor FLOAT
Modifies all edge speeds by multiplying by FLOAT
--speed.minimum FLOAT
Modifies all edge speeds to at least FLOAT
--edges.join-tram-dist FLOAT
Joins tram edges into road lanes with similar geometry (within FLOAT distance)
Building Defaults Options:
-L, --default.lanenumber INT
The default number of lanes in an edge
--default.lanewidth FLOAT
The default width of lanes
--default.spreadtype STR
The default method for computing lane shapes from edge shapes
-S, --default.speed FLOAT
The default speed on an edge (in m/s)
--default.friction FLOAT
The default friction on an edge
-P, --default.priority INT
The default priority of an edge
--default.type STR
The default edge type
--default.sidewalk-width FLOAT
The default width of added sidewalks
--default.bikelane-width FLOAT
The default width of added bike lanes
--default.crossing-width FLOAT
The default width of a pedestrian crossing
--default.crossing-speed FLOAT
The default speed 'limit' on a pedestrian crossing (in m/s)
--default.walkingarea-speed FLOAT
The default speed 'limit' on a pedestrian walkingarea (in m/s)
--default.allow STR
The default for allowed vehicle classes
--default.disallow STR
The default for disallowed vehicle classes
--default.junctions.keep-clear
Whether junctions should be kept clear by default
--default.junctions.radius FLOAT
The default turning radius of intersections
--default.connection-length FLOAT
The default length when overriding connection lengths
--default.right-of-way STR
The default algorithm for computing right of way rules ('default', 'edgePriority')
TLS Building Options:
--tls.discard-loaded
Does not instatiate traffic lights loaded from other formats than plain-XML
--tls.discard-simple
Does not instatiate traffic lights at geometry-like nodes loaded from other formats
than plain-XML
--tls.set STR[]
Interprets STR[] as list of junctions to be controlled by TLS
--tls.unset STR[]
Interprets STR[] as list of junctions to be not controlled by TLS
--tls.guess
Turns on TLS guessing
--tls.guess.threshold FLOAT
Sets minimum value for the sum of all incoming lane speeds when guessing TLS
--tls.taz-nodes
Sets district nodes as tls-controlled
--tls.guess.joining
Includes node clusters into guess
--tls.join
Tries to cluster tls-controlled nodes
--tls.join-dist FLOAT
Determines the maximal distance for joining traffic lights (defaults to 20)
--tls.join-exclude STR[]
Interprets STR[] as list of tls ids to exclude from joining
--tls.uncontrolled-within
Do not control edges that lie fully within a joined traffic light. This may cause
collisions but allows old traffic light plans to be used
--tls.ignore-internal-junction-jam
Do not build mutually conflicting response matrix, potentially ignoring vehicles
that are stuck at an internal junction when their phase has ended
--tls.guess-signals
Interprets tls nodes surrounding an intersection as signal positions for a larger
TLS. This is typical pattern for OSM-derived networks
--tls.guess-signals.dist FLOAT
Distance for interpreting nodes as signal locations
--tls.guess-signals.slack INT
Number of uncontrolled entry edges to accept and still consider the central node as
a traffic light
--tls.cycle.time INT
Use INT as cycle duration
--tls.green.time INT
Use INT as green phase duration
-D, --tls.yellow.min-decel FLOAT
Defines smallest vehicle deceleration
--tls.yellow.patch-small
Given yellow times are patched even if being too short
--tls.yellow.time INT
Set INT as fixed time for yellow phase durations
--tls.red.time INT
Set INT as fixed time for red phase duration at traffic lights that do not have a
conflicting flow
--tls.allred.time INT
Set INT as fixed time for intermediate red phase after every switch
--tls.minor-left.max-speed FLOAT
Use FLOAT as threshold for allowing left-turning vehicles to move in the same phase
as oncoming straight-going vehicles
--tls.left-green.time INT
Use INT as green phase duration for left turns (s). Setting this value to 0
disables additional left-turning phases
--tls.nema.vehExt INT
Set INT as fixed time for intermediate vehext phase after every switch
--tls.nema.yellow INT
Set INT as fixed time for intermediate NEMA yelow phase after every switch
--tls.nema.red INT
Set INT as fixed time for intermediate NEMA red phase after every switch
--tls.crossing-min.time INT
Use INT as minimum green duration for pedestrian crossings (s).
--tls.crossing-clearance.time INT
Use INT as clearance time for pedestrian crossings (s).
--tls.scramble.time INT
Use INT as green phase duration for pedestrian scramble phase (s).
--tls.half-offset STR[]
TLSs in STR[] will be shifted by half-phase
--tls.quarter-offset STR[]
TLSs in STR[] will be shifted by quarter-phase
--tls.default-type STR
TLSs with unspecified type will use STR as their algorithm
--tls.layout STR
Set phase layout four grouping opposite directions or grouping all movements for
one incoming edge ['opposites', 'incoming']
--tls.no-mixed
Avoid phases with green and red signals for different connections from the same
lane
--tls.min-dur INT
Default minimum phase duration for traffic lights with variable phase length
--tls.max-dur INT
Default maximum phase duration for traffic lights with variable phase length
--tls.group-signals
Assign the same tls link index to connections that share the same states
--tls.ungroup-signals
Assign a distinct tls link index to every connection
--tls.rebuild
rebuild all traffic light plans in the network
Ramp Guessing Options:
--ramps.guess
Enable ramp-guessing
--ramps.guess-acceleration-lanes
Guess on-ramps and mark acceleration lanes if they exist but do not add new lanes
--ramps.max-ramp-speed FLOAT
Treat edges with speed > FLOAT as no ramps
--ramps.min-highway-speed FLOAT
Treat edges with speed < FLOAT as no highways
--ramps.ramp-length FLOAT
Use FLOAT as ramp-length
--ramps.min-weave-length FLOAT
Use FLOAT as minimum ramp-length
--ramps.set STR[]
Tries to handle the given edges as ramps
--ramps.unset STR[]
Do not consider the given edges as ramps
--ramps.no-split
Avoids edge splitting
Edge Removal Options:
--keep-edges.min-speed FLOAT
Only keep edges with speed in meters/second > FLOAT
--remove-edges.explicit STR[]
Remove edges in STR[]
--keep-edges.explicit STR[]
Only keep edges in STR[] or those which are kept due to other keep-edges or
remove-edges options
--keep-edges.input-file FILE
Only keep edges in FILE (Each id on a single line. Selection files from sumo-gui
are also supported) or those which are kept due to other keep-edges or remove-edges
options
--remove-edges.input-file FILE
Remove edges in FILE. (Each id on a single line. Selection files from sumo-gui are
also supported)
--keep-edges.postload
Remove edges after joining
--keep-edges.in-boundary STR[]
Only keep edges which are located within the given boundary (given either as
CARTESIAN corner coordinates <xmin,ymin,xmax,ymax> or as polygon <x0,y0,x1,y1,...>)
--keep-edges.in-geo-boundary STR[]
Only keep edges which are located within the given boundary (given either as
GEODETIC corner coordinates <lon-min,lat-min,lon-max,lat-max> or as polygon
<lon0,lat0,lon1,lat1,...>)
--keep-edges.by-vclass STR[]
Only keep edges which allow one of the vclasses in STR[]
--remove-edges.by-vclass STR[]
Remove edges which allow only vclasses from STR[]
--keep-edges.by-type STR[]
Only keep edges where type is in STR[]
--keep-edges.components INT
Only keep the INT largest weakly connected components
--remove-edges.by-type STR[]
Remove edges where type is in STR[]
--remove-edges.isolated
Removes isolated edges
Unregulated Nodes Options:
--keep-nodes-unregulated
All nodes will be unregulated
--keep-nodes-unregulated.explicit STR[]
Do not regulate nodes in STR[]
--keep-nodes-unregulated.district-nodes
Do not regulate district nodes
Junctions Options:
--junctions.right-before-left.speed-threshold FLOAT
Allow building right-before-left junctions when the incoming edge speeds are below
FLOAT (m/s)
--junctions.left-before-right
Build left-before-right junctions instead of right-before-left junctions
--no-internal-links
Omits internal links
--no-turnarounds
Disables building turnarounds
--no-turnarounds.tls
Disables building turnarounds at tls-controlled junctions
--no-turnarounds.geometry
Disables building turnarounds at geometry-like junctions
--no-turnarounds.except-deadend
Disables building turnarounds except at dead end junctions
--no-turnarounds.except-turnlane
Disables building turnarounds except at at junctions with a dedicated turning lane
--no-turnarounds.fringe
Disables building turnarounds at fringe junctions
--no-left-connections
Disables building connections to left
--junctions.join
Joins junctions that are close to each other (recommended for OSM import)
--junctions.join-dist FLOAT
Determines the maximal distance for joining junctions (defaults to 10)
--junctions.join-exclude STR[]
Interprets STR[] as list of junctions to exclude from joining
--junctions.join-same
Joins junctions that have the same coordinates even if not connected
--max-join-ids INT
Abbreviate junction or TLS id if it joins more than INT junctions
--junctions.corner-detail INT
Generate INT intermediate points to smooth out intersection corners
--junctions.internal-link-detail INT
Generate INT intermediate points to smooth out lanes within the intersection
--junctions.scurve-stretch FLOAT
Generate longer intersections to allow for smooth s-curves when the number of lanes
changes
--junctions.join-turns
Builds common edges for turning connections with common from- and to-edge. This
causes discrepancies between geometrical length and assigned length due to
averaging but enables lane-changing while turning
--junctions.limit-turn-speed FLOAT
Limits speed on junctions to an average lateral acceleration of at most FLOAT
m/s^2)
--junctions.limit-turn-speed.min-angle FLOAT
Do not limit turn speed for angular changes below FLOAT (degrees). The value is
subtracted from the geometric angle before computing the turning radius.
--junctions.limit-turn-speed.min-angle.railway FLOAT
Do not limit turn speed for angular changes below FLOAT (degrees) on railway edges.
The value is subtracted from the geometric angle before computing the turning
radius.
--junctions.limit-turn-speed.warn.straight FLOAT
Warn about turn speed limits that reduce the speed of straight connections by more
than FLOAT
--junctions.limit-turn-speed.warn.turn FLOAT
Warn about turn speed limits that reduce the speed of turning connections (no
u-turns) by more than FLOAT
--junctions.small-radius FLOAT
Default radius for junctions that do not require wide vehicle turns
--junctions.higher-speed
Use maximum value of incoming and outgoing edge speed on junction instead of
average
--junctions.minimal-shape
Build junctions with minimal shapes (igoring edge overlap)
--internal-junctions.vehicle-width FLOAT
Assumed vehicle width for computing internal junction positions
--rectangular-lane-cut
Forces rectangular cuts between lanes and intersections
--check-lane-foes.roundabout
Allow driving onto a multi-lane road if there are foes on other lanes (at
roundabouts)
--check-lane-foes.all
Allow driving onto a multi-lane road if there are foes on other lanes (everywhere)
Pedestrian Options:
--sidewalks.guess
Guess pedestrian sidewalks based on edge speed
--sidewalks.guess.max-speed FLOAT
Add sidewalks for edges with a speed equal or below the given limit
--sidewalks.guess.min-speed FLOAT
Add sidewalks for edges with a speed above the given limit
--sidewalks.guess.from-permissions
Add sidewalks for edges that allow pedestrians on any of their lanes regardless of
speed
--sidewalks.guess.exclude STR[]
Do not guess sidewalks for the given list of edges
--crossings.guess
Guess pedestrian crossings based on the presence of sidewalks
--crossings.guess.speed-threshold FLOAT
At uncontrolled nodes, do not build crossings across edges with a speed above the
threshold
--walkingareas
Always build walking areas even if there are no crossings
--walkingareas.join-dist FLOAT
Do not create a walkingarea between sidewalks that are connected by a pedestrian
junction within FLOAT
Bicycle Options:
--bikelanes.guess
Guess bike lanes based on edge speed
--bikelanes.guess.max-speed FLOAT
Add bike lanes for edges with a speed equal or below the given limit
--bikelanes.guess.min-speed FLOAT
Add bike lanes for edges with a speed above the given limit
--bikelanes.guess.from-permissions
Add bike lanes for edges that allow bicycles on any of their lanes regardless of
speed
--bikelanes.guess.exclude STR[]
Do not guess bikelanes for the given list of edges
Railway Options:
--railway.signals.discard
Discard all railway signal information loaded from other formats than plain-xml
--railway.topology.repair
Repair topology of the railway network
--railway.topology.repair.minimal
Repair topology of the railway network just enough to let loaded public transport
lines to work
--railway.topology.repair.connect-straight
Allow bidirectional rail use wherever rails with opposite directions meet at a
straight angle
--railway.topology.repair.stop-turn
Add turn-around connections at all loaded stops.
--railway.topology.repair.bidi-penalty FLOAT
Penalty factor for adding new bidi edges to connect public transport stops
--railway.topology.all-bidi
Make all rails usable in both direction
--railway.topology.all-bidi.input-file FILE
Make all rails edge ids from FILE usable in both direction
--railway.topology.direction-priority
Set edge priority values based on estimated main direction
--railway.topology.extend-priority
Extend loaded edge priority values based on estimated main direction
--railway.signal.guess.by-stops
Guess signals that guard public transport stops
--railway.access-distance FLOAT
The search radius for finding suitable road accesses for rail stops
--railway.max-accesses INT
The maximum road accesses registered per rail stops
--railway.access-factor FLOAT
The walking length of the access is computed as air-line distance multiplied by
FLOAT
Formats Options:
--discard-params STR[]
Remove the list of keys from all params
--ignore-change-restrictions STR[]
List vehicle classes that may ignore lane changing restrictions ('all' discards all
restrictions)
--osm.skip-duplicates-check
Skips the check for duplicate nodes and edges
--osm.elevation
Imports elevation data
--osm.layer-elevation FLOAT
Reconstruct (relative) elevation based on layer data. Each layer is raised by FLOAT
m
--osm.layer-elevation.max-grade FLOAT
Maximum grade threshold in % at 50km/h when reconstrucing elevation based on layer
data. The value is scaled according to road speed.
--osm.oneway-spread-right
Whether one-way roads should be spread to the side instead of centered
--osm.lane-access
Import lane-specific access restrictions
--osm.bike-access
Import bike lanes and fix directions and permissions on bike paths
--osm.sidewalks
Import sidewalks
--osm.crossings
Import crossings
--osm.turn-lanes
Import turning arrows from OSM to help with connection building
--osm.stop-output.length FLOAT
The default length of a public transport stop in FLOAT m
--osm.stop-output.length.bus FLOAT
The default length of a bus stop in FLOAT m
--osm.stop-output.length.tram FLOAT
The default length of a tram stop in FLOAT m
--osm.stop-output.length.train FLOAT
The default length of a train stop in FLOAT m
--osm.all-attributes
Whether additional attributes shall be imported
--osm.extra-attributes STR[]
List of additional attributes that shall be imported from OSM via
osm.all-attributes (set 'all' to import all)
--osm.speedlimit-none FLOAT
The speed limit to be set when there is no actual speed limit in reality
--matsim.keep-length
The edge lengths given in the MATSIM-file will be kept
--matsim.lanes-from-capacity
The lane number will be computed from the capacity
--shapefile.street-id STR
Read edge ids from column STR
--shapefile.from-id STR
Read from-node ids from column STR
--shapefile.to-id STR
Read to-node ids from column STR
--shapefile.type-id STR
Read type ids from column STR
--shapefile.laneNumber STR
Read lane number from column STR
--shapefile.speed STR
Read speed from column STR
--shapefile.length STR
Read custom edge length from column STR
--shapefile.width STR
Read total edge width from column STR
--shapefile.name STR
Read (non-unique) name from column STR
--shapefile.node-join-dist FLOAT
Distance threshold for determining whether distinct shapes are connected (used when
from-id and to-id are not available)
--shapefile.add-params STR[]
Add the list of field names as edge params
--shapefile.use-defaults-on-failure
Uses edge type defaults on problems
--shapefile.all-bidirectional
Insert edges in both directions
--shapefile.guess-projection
Guess the proper projection
--shapefile.traditional-axis-mapping
Use traditional axis order (lon, lat)
--dlr-navteq.tolerant-permissions
Allow more vehicle classes by default
--dlr-navteq.keep-length
The edge lengths given in the DLR Navteq-file will be kept
--vissim.join-distance FLOAT
Structure join offset
--vissim.default-speed FLOAT
Use FLOAT as default speed
--vissim.speed-norm FLOAT
Factor for edge velocity
--vissim.report-unset-speeds
Writes lanes without an explicit speed set
--visum.language-file FILE
Load language mappings from FILE
--visum.use-type-priority
Uses priorities from types
--visum.use-type-laneno
Uses lane numbers from types
--visum.use-type-speed
Uses speeds from types
--visum.connector-speeds FLOAT
Sets connector speed
--visum.connectors-lane-number INT
Sets connector lane number
--visum.no-connectors
Excludes connectors
--visum.recompute-lane-number
Computes the number of lanes from the edges' capacities
--visum.verbose-warnings
Prints all warnings, some of which are due to VISUM misbehaviour
--visum.lanes-from-capacity.norm FLOAT
The factor for flow to no. lanes conversion
--opendrive.import-all-lanes
Imports all lane types
--opendrive.ignore-widths
Whether lane widths shall be ignored.
--opendrive.curve-resolution FLOAT
The geometry resolution in m when importing curved geometries as line segments.
--opendrive.advance-stopline FLOAT
Allow stop lines to be built beyond the start of the junction if the geometries
allow so
--opendrive.min-width FLOAT
The minimum lane width for determining start or end of variable-width lanes
--opendrive.internal-shapes
Import internal lane shapes
--opendrive.position-ids
Sets edge-id based on road-id and offset in m (legacy)
--opendrive.lane-shapes
Use custom lane shapes to compensate discarded lane types
--opendrive.signal-groups
Use the OpenDRIVE controller information for the generated signal program
Report Options:
-v, --verbose
Switches to verbose output
--print-options
Prints option values before processing
-?, --help
Prints this screen or selected topics
-V, --version
Prints the current version
-X, --xml-validation STR
Set schema validation scheme of XML inputs ("never", "local", "auto" or "always")
--xml-validation.net STR
Set schema validation scheme of SUMO network inputs ("never", "local", "auto" or
"always")
-W, --no-warnings
Disables output of warnings
--aggregate-warnings INT
Aggregate warnings of the same type whenever more than INT occur
-l, --log FILE
Writes all messages to FILE (implies verbose)
--message-log FILE
Writes all non-error messages to FILE (implies verbose)
--error-log FILE
Writes all warnings and errors to FILE
--language STR
Language to use in messages
--ignore-errors
Continue on broken input
--ignore-errors.connections
Continue on invalid connections
--show-errors.connections-first-try
Show errors in connections at parsing
--ignore-errors.edge-type
Continue on unknown edge types
Random Number Options:
--random
Initialises the random number generator with the current system time
--seed INT
Initialises the random number generator with the given value
EXAMPLES
netconvert -c <CONFIGURATION>
generate net with options read from file
netconvert -n ./nodes.xml -e ./edges.xml -v -t ./owntypes.xml
generate net with given nodes, edges, and edge types doing verbose output
REPORTING BUGS
Report bugs at <https://github.com/eclipse/sumo/issues>.
Get in contact via <sumo@dlr.de>.
Build features: Linux-6.8.0-47-generic x86_64 GNU 14.2.0 None FMI Proj GUI Intl
SWIG GDAL FFmpeg OSG GL2PS Eigen
Copyright (C) 2001-2023 German Aerospace Center (DLR) and others;
https://sumo.dlr.de
Eclipse SUMO netconvert Version 1.18.0 is part of SUMO.
This program and the accompanying materials are made available under the terms of the
Eclipse Public License v2.0 which accompanies this distribution, and is available at
http://www.eclipse.org/legal/epl-v20.html
This program may also be made available under the following Secondary
Licenses when the conditions for such availability set forth in the Eclipse
Public License 2.0 are satisfied: GNU General Public License, version 2 or later which is
available at https://www.gnu.org/licenses/old-licenses/gpl-2.0-standalone.html
SPDX-License-Identifier: EPL-2.0 OR GPL-2.0-or-later