Provided by: openssl_3.3.1-2ubuntu2_amd64 
NAME
openssl-s_client - SSL/TLS client program
SYNOPSIS
openssl s_client [-help] [-ssl_config section] [-connect host:port] [-host hostname]
[-port port] [-bind host:port] [-proxy host:port] [-proxy_user userid] [-proxy_pass arg]
[-unix path] [-4] [-6] [-quic] [-servername name] [-noservername] [-verify depth]
[-verify_return_error] [-verify_quiet] [-verifyCAfile filename] [-verifyCApath dir]
[-verifyCAstore uri] [-cert filename] [-certform DER|PEM|P12] [-cert_chain filename]
[-build_chain] [-CRL filename] [-CRLform DER|PEM] [-crl_download] [-key filename|uri]
[-keyform DER|PEM|P12|ENGINE] [-pass arg] [-chainCAfile filename] [-chainCApath directory]
[-chainCAstore uri] [-requestCAfile filename] [-dane_tlsa_domain domain]
[-dane_tlsa_rrdata rrdata] [-dane_ee_no_namechecks] [-reconnect] [-showcerts] [-prexit]
[-no-interactive] [-debug] [-trace] [-nocommands] [-adv] [-security_debug]
[-security_debug_verbose] [-msg] [-timeout] [-mtu size] [-no_etm] [-no_ems] [-keymatexport
label] [-keymatexportlen len] [-msgfile filename] [-nbio_test] [-state] [-nbio] [-crlf]
[-ign_eof] [-no_ign_eof] [-psk_identity identity] [-psk key] [-psk_session file] [-quiet]
[-sctp] [-sctp_label_bug] [-fallback_scsv] [-async] [-maxfraglen len] [-max_send_frag]
[-split_send_frag] [-max_pipelines] [-read_buf] [-ignore_unexpected_eof] [-bugs]
[-no_tx_cert_comp] [-no_rx_cert_comp] [-comp] [-no_comp] [-brief] [-legacy_server_connect]
[-no_legacy_server_connect] [-allow_no_dhe_kex] [-prefer_no_dhe_kex] [-sigalgs sigalglist]
[-curves curvelist] [-cipher cipherlist] [-ciphersuites val] [-serverpref] [-starttls
protocol] [-name hostname] [-xmpphost hostname] [-name hostname] [-tlsextdebug]
[-no_ticket] [-sess_out filename] [-serverinfo types] [-sess_in filename] [-serverinfo
types] [-status] [-alpn protocols] [-nextprotoneg protocols] [-ct] [-noct] [-ctlogfile]
[-keylogfile file] [-early_data file] [-enable_pha] [-use_srtp value] [-srpuser value]
[-srppass value] [-srp_lateuser] [-srp_moregroups] [-srp_strength number] [-ktls] [-tfo]
[-nameopt option] [-no_ssl3] [-no_tls1] [-no_tls1_1] [-no_tls1_2] [-no_tls1_3] [-ssl3]
[-tls1] [-tls1_1] [-tls1_2] [-tls1_3] [-dtls] [-dtls1] [-dtls1_2] [-xkey infile] [-xcert
file] [-xchain file] [-xchain_build file] [-xcertform DER|PEM]> [-xkeyform DER|PEM]>
[-CAfile file] [-no-CAfile] [-CApath dir] [-no-CApath] [-CAstore uri] [-no-CAstore]
[-bugs] [-no_comp] [-comp] [-no_ticket] [-serverpref] [-client_renegotiation]
[-legacy_renegotiation] [-no_renegotiation] [-no_resumption_on_reneg]
[-legacy_server_connect] [-no_legacy_server_connect] [-no_etm] [-allow_no_dhe_kex]
[-prefer_no_dhe_kex] [-prioritize_chacha] [-strict] [-sigalgs algs] [-client_sigalgs algs]
[-groups groups] [-curves curves] [-named_curve curve] [-cipher ciphers] [-ciphersuites
1.3ciphers] [-min_protocol minprot] [-max_protocol maxprot] [-record_padding padding]
[-debug_broken_protocol] [-no_middlebox] [-rand files] [-writerand file] [-provider name]
[-provider-path path] [-propquery propq] [-engine id] [-ssl_client_engine id]
[-allow_proxy_certs] [-attime timestamp] [-no_check_time] [-check_ss_sig] [-crl_check]
[-crl_check_all] [-explicit_policy] [-extended_crl] [-ignore_critical] [-inhibit_any]
[-inhibit_map] [-partial_chain] [-policy arg] [-policy_check] [-policy_print] [-purpose
purpose] [-suiteB_128] [-suiteB_128_only] [-suiteB_192] [-trusted_first] [-no_alt_chains]
[-use_deltas] [-auth_level num] [-verify_depth num] [-verify_email email]
[-verify_hostname hostname] [-verify_ip ip] [-verify_name name] [-x509_strict]
[-issuer_checks] [-enable_server_rpk] [-enable_client_rpk] [host:port]
DESCRIPTION
This command implements a generic SSL/TLS client which connects to a remote host using
SSL/TLS. It is a very useful diagnostic tool for SSL servers.
OPTIONS
In addition to the options below, this command also supports the common and client only
options documented in the "Supported Command Line Commands" section of the SSL_CONF_cmd(3)
manual page.
-help
Print out a usage message.
-ssl_config section
Use the specified section of the configuration file to configure the SSL_CTX object.
-connect host:port
This specifies the host and optional port to connect to. It is possible to select the
host and port using the optional target positional argument instead. If neither this
nor the target positional argument are specified then an attempt is made to connect to
the local host on port 4433.
-host hostname
Host to connect to; use -connect instead.
-port port
Connect to the specified port; use -connect instead.
-bind host:port
This specifies the host address and or port to bind as the source for the connection.
For Unix-domain sockets the port is ignored and the host is used as the source socket
address.
-proxy host:port
When used with the -connect flag, the program uses the host and port specified with
this flag and issues an HTTP CONNECT command to connect to the desired server.
-proxy_user userid
When used with the -proxy flag, the program will attempt to authenticate with the
specified proxy using basic (base64) authentication. NB: Basic authentication is
insecure; the credentials are sent to the proxy in easily reversible base64 encoding
before any TLS/SSL session is established. Therefore, these credentials are easily
recovered by anyone able to sniff/trace the network. Use with caution.
-proxy_pass arg
The proxy password source, used with the -proxy_user flag. For more information about
the format of arg see openssl-passphrase-options(1).
-unix path
Connect over the specified Unix-domain socket.
-4 Use IPv4 only.
-6 Use IPv6 only.
-quic
Connect using the QUIC protocol. If specified then the -alpn option must also be
provided.
-servername name
Set the TLS SNI (Server Name Indication) extension in the ClientHello message to the
given value. If -servername is not provided, the TLS SNI extension will be populated
with the name given to -connect if it follows a DNS name format. If -connect is not
provided either, the SNI is set to "localhost". This is the default since OpenSSL
1.1.1.
Even though SNI should normally be a DNS name and not an IP address, if -servername is
provided then that name will be sent, regardless of whether it is a DNS name or not.
This option cannot be used in conjunction with -noservername.
-noservername
Suppresses sending of the SNI (Server Name Indication) extension in the ClientHello
message. Cannot be used in conjunction with the -servername or -dane_tlsa_domain
options.
-cert filename
The client certificate to use, if one is requested by the server. The default is not
to use a certificate.
The chain for the client certificate may be specified using -cert_chain.
-certform DER|PEM|P12
The client certificate file format to use; unspecified by default. See
openssl-format-options(1) for details.
-cert_chain
A file or URI of untrusted certificates to use when attempting to build the
certificate chain related to the certificate specified via the -cert option. The
input can be in PEM, DER, or PKCS#12 format.
-build_chain
Specify whether the application should build the client certificate chain to be
provided to the server.
-CRL filename
CRL file to use to check the server's certificate.
-CRLform DER|PEM
The CRL file format; unspecified by default. See openssl-format-options(1) for
details.
-crl_download
Download CRL from distribution points in the certificate.
-key filename|uri
The client private key to use. If not specified then the certificate file will be
used to read also the key.
-keyform DER|PEM|P12|ENGINE
The key format; unspecified by default. See openssl-format-options(1) for details.
-pass arg
the private key and certificate file password source. For more information about the
format of arg see openssl-passphrase-options(1).
-verify depth
The verify depth to use. This specifies the maximum length of the server certificate
chain and turns on server certificate verification. Currently the verify operation
continues after errors so all the problems with a certificate chain can be seen. As a
side effect the connection will never fail due to a server certificate verify failure.
-verify_return_error
Return verification errors instead of continuing. This will typically abort the
handshake with a fatal error.
-verify_quiet
Limit verify output to only errors.
-verifyCAfile filename
A file in PEM format containing trusted certificates to use for verifying the server's
certificate.
-verifyCApath dir
A directory containing trusted certificates to use for verifying the server's
certificate. This directory must be in "hash format", see openssl-verify(1) for more
information.
-verifyCAstore uri
The URI of a store containing trusted certificates to use for verifying the server's
certificate.
-chainCAfile file
A file in PEM format containing trusted certificates to use when attempting to build
the client certificate chain.
-chainCApath directory
A directory containing trusted certificates to use for building the client certificate
chain provided to the server. This directory must be in "hash format", see
openssl-verify(1) for more information.
-chainCAstore uri
The URI of a store containing trusted certificates to use when attempting to build the
client certificate chain. The URI may indicate a single certificate, as well as a
collection of them. With URIs in the "file:" scheme, this acts as -chainCAfile or
-chainCApath, depending on if the URI indicates a directory or a single file. See
ossl_store-file(7) for more information on the "file:" scheme.
-requestCAfile file
A file containing a list of certificates whose subject names will be sent to the
server in the certificate_authorities extension. Only supported for TLS 1.3
-dane_tlsa_domain domain
Enable RFC6698/RFC7671 DANE TLSA authentication and specify the TLSA base domain which
becomes the default SNI hint and the primary reference identifier for hostname checks.
This must be used in combination with at least one instance of the -dane_tlsa_rrdata
option below.
When DANE authentication succeeds, the diagnostic output will include the lowest
(closest to 0) depth at which a TLSA record authenticated a chain certificate. When
that TLSA record is a "2 1 0" trust anchor public key that signed (rather than
matched) the top-most certificate of the chain, the result is reported as "TA public
key verified". Otherwise, either the TLSA record "matched TA certificate" at a
positive depth or else "matched EE certificate" at depth 0.
-dane_tlsa_rrdata rrdata
Use one or more times to specify the RRDATA fields of the DANE TLSA RRset associated
with the target service. The rrdata value is specified in "presentation form", that
is four whitespace separated fields that specify the usage, selector, matching type
and associated data, with the last of these encoded in hexadecimal. Optional
whitespace is ignored in the associated data field. For example:
$ openssl s_client -brief -starttls smtp \
-connect smtp.example.com:25 \
-dane_tlsa_domain smtp.example.com \
-dane_tlsa_rrdata "2 1 1
B111DD8A1C2091A89BD4FD60C57F0716CCE50FEEFF8137CDBEE0326E 02CF362B" \
-dane_tlsa_rrdata "2 1 1
60B87575447DCBA2A36B7D11AC09FB24A9DB406FEE12D2CC90180517 616E8A18"
...
Verification: OK
Verified peername: smtp.example.com
DANE TLSA 2 1 1 ...ee12d2cc90180517616e8a18 matched TA certificate at depth 1
...
-dane_ee_no_namechecks
This disables server name checks when authenticating via DANE-EE(3) TLSA records. For
some applications, primarily web browsers, it is not safe to disable name checks due
to "unknown key share" attacks, in which a malicious server can convince a client that
a connection to a victim server is instead a secure connection to the malicious
server. The malicious server may then be able to violate cross-origin scripting
restrictions. Thus, despite the text of RFC7671, name checks are by default enabled
for DANE-EE(3) TLSA records, and can be disabled in applications where it is safe to
do so. In particular, SMTP and XMPP clients should set this option as SRV and MX
records already make it possible for a remote domain to redirect client connections to
any server of its choice, and in any case SMTP and XMPP clients do not execute scripts
downloaded from remote servers.
-reconnect
Reconnects to the same server 5 times using the same session ID, this can be used as a
test that session caching is working.
-showcerts
Displays the server certificate list as sent by the server: it only consists of
certificates the server has sent (in the order the server has sent them). It is not a
verified chain.
-prexit
Print session information when the program exits. This will always attempt to print
out information even if the connection fails. Normally information will only be
printed out once if the connection succeeds. This option is useful because the cipher
in use may be renegotiated or the connection may fail because a client certificate is
required or is requested only after an attempt is made to access a certain URL. Note:
the output produced by this option is not always accurate because a connection might
never have been established.
-no-interactive
This flag can be used to run the client in a non-interactive mode.
-state
Prints out the SSL session states.
-debug
Print extensive debugging information including a hex dump of all traffic.
-nocommands
Do not use interactive command letters.
-adv
Use advanced command mode.
-security_debug
Enable security debug messages.
-security_debug_verbose
Output more security debug output.
-msg
Show protocol messages.
-timeout
Enable send/receive timeout on DTLS connections.
-mtu size
Set MTU of the link layer to the specified size.
-no_etm
Disable Encrypt-then-MAC negotiation.
-no_ems
Disable Extended master secret negotiation.
-keymatexport label
Export keying material using the specified label.
-keymatexportlen len
Export the specified number of bytes of keying material; default is 20.
Show all protocol messages with hex dump.
-trace
Show verbose trace output of protocol messages.
-msgfile filename
File to send output of -msg or -trace to, default standard output.
-nbio_test
Tests nonblocking I/O
-nbio
Turns on nonblocking I/O
-crlf
This option translated a line feed from the terminal into CR+LF as required by some
servers.
-ign_eof
Inhibit shutting down the connection when end of file is reached in the input.
-quiet
Inhibit printing of session and certificate information. This implicitly turns on
-ign_eof as well.
-no_ign_eof
Shut down the connection when end of file is reached in the input. Can be used to
override the implicit -ign_eof after -quiet.
-psk_identity identity
Use the PSK identity identity when using a PSK cipher suite. The default value is
"Client_identity" (without the quotes).
-psk key
Use the PSK key key when using a PSK cipher suite. The key is given as a hexadecimal
number without leading 0x, for example -psk 1a2b3c4d. This option must be provided in
order to use a PSK cipher.
-psk_session file
Use the pem encoded SSL_SESSION data stored in file as the basis of a PSK. Note that
this will only work if TLSv1.3 is negotiated.
-sctp
Use SCTP for the transport protocol instead of UDP in DTLS. Must be used in
conjunction with -dtls, -dtls1 or -dtls1_2. This option is only available where
OpenSSL has support for SCTP enabled.
-sctp_label_bug
Use the incorrect behaviour of older OpenSSL implementations when computing endpoint-
pair shared secrets for DTLS/SCTP. This allows communication with older broken
implementations but breaks interoperability with correct implementations. Must be used
in conjunction with -sctp. This option is only available where OpenSSL has support for
SCTP enabled.
-fallback_scsv
Send TLS_FALLBACK_SCSV in the ClientHello.
-async
Switch on asynchronous mode. Cryptographic operations will be performed
asynchronously. This will only have an effect if an asynchronous capable engine is
also used via the -engine option. For test purposes the dummy async engine (dasync)
can be used (if available).
-maxfraglen len
Enable Maximum Fragment Length Negotiation; allowed values are 512, 1024, 2048, and
4096.
-max_send_frag int
The maximum size of data fragment to send. See SSL_CTX_set_max_send_fragment(3) for
further information.
-split_send_frag int
The size used to split data for encrypt pipelines. If more data is written in one go
than this value then it will be split into multiple pipelines, up to the maximum
number of pipelines defined by max_pipelines. This only has an effect if a suitable
cipher suite has been negotiated, an engine that supports pipelining has been loaded,
and max_pipelines is greater than 1. See SSL_CTX_set_split_send_fragment(3) for
further information.
-max_pipelines int
The maximum number of encrypt/decrypt pipelines to be used. This will only have an
effect if an engine has been loaded that supports pipelining (e.g. the dasync engine)
and a suitable cipher suite has been negotiated. The default value is 1. See
SSL_CTX_set_max_pipelines(3) for further information.
-read_buf int
The default read buffer size to be used for connections. This will only have an effect
if the buffer size is larger than the size that would otherwise be used and pipelining
is in use (see SSL_CTX_set_default_read_buffer_len(3) for further information).
-ignore_unexpected_eof
Some TLS implementations do not send the mandatory close_notify alert on shutdown. If
the application tries to wait for the close_notify alert but the peer closes the
connection without sending it, an error is generated. When this option is enabled the
peer does not need to send the close_notify alert and a closed connection will be
treated as if the close_notify alert was received. For more information on shutting
down a connection, see SSL_shutdown(3).
-bugs
There are several known bugs in SSL and TLS implementations. Adding this option
enables various workarounds.
-no_tx_cert_comp
Disables support for sending TLSv1.3 compressed certificates.
-no_rx_cert_comp
Disables support for receiving TLSv1.3 compressed certificate.
-comp
Enables support for SSL/TLS compression. This option was introduced in OpenSSL 1.1.0.
TLS compression is not recommended and is off by default as of OpenSSL 1.1.0. TLS
compression can only be used in security level 1 or lower. From OpenSSL 3.2.0 and
above the default security level is 2, so this option will have no effect without also
changing the security level. Use the -cipher option to change the security level. See
openssl-ciphers(1) for more information.
-no_comp
Disables support for SSL/TLS compression. TLS compression is not recommended and is
off by default as of OpenSSL 1.1.0.
-brief
Only provide a brief summary of connection parameters instead of the normal verbose
output.
-sigalgs sigalglist
Specifies the list of signature algorithms that are sent by the client. The server
selects one entry in the list based on its preferences. For example strings, see
SSL_CTX_set1_sigalgs(3)
-curves curvelist
Specifies the list of supported curves to be sent by the client. The curve is
ultimately selected by the server. For a list of all curves, use:
$ openssl ecparam -list_curves
-cipher cipherlist
This allows the TLSv1.2 and below cipher list sent by the client to be modified. This
list will be combined with any TLSv1.3 ciphersuites that have been configured.
Although the server determines which ciphersuite is used it should take the first
supported cipher in the list sent by the client. See openssl-ciphers(1) for more
information.
-ciphersuites val
This allows the TLSv1.3 ciphersuites sent by the client to be modified. This list will
be combined with any TLSv1.2 and below ciphersuites that have been configured.
Although the server determines which cipher suite is used it should take the first
supported cipher in the list sent by the client. See openssl-ciphers(1) for more
information. The format for this list is a simple colon (":") separated list of
TLSv1.3 ciphersuite names.
-starttls protocol
Send the protocol-specific message(s) to switch to TLS for communication. protocol is
a keyword for the intended protocol. Currently, the only supported keywords are
"smtp", "pop3", "imap", "ftp", "xmpp", "xmpp-server", "irc", "postgres", "mysql",
"lmtp", "nntp", "sieve" and "ldap".
-xmpphost hostname
This option, when used with "-starttls xmpp" or "-starttls xmpp-server", specifies the
host for the "to" attribute of the stream element. If this option is not specified,
then the host specified with "-connect" will be used.
This option is an alias of the -name option for "xmpp" and "xmpp-server".
-name hostname
This option is used to specify hostname information for various protocols used with
-starttls option. Currently only "xmpp", "xmpp-server", "smtp" and "lmtp" can utilize
this -name option.
If this option is used with "-starttls xmpp" or "-starttls xmpp-server", if specifies
the host for the "to" attribute of the stream element. If this option is not
specified, then the host specified with "-connect" will be used.
If this option is used with "-starttls lmtp" or "-starttls smtp", it specifies the
name to use in the "LMTP LHLO" or "SMTP EHLO" message, respectively. If this option is
not specified, then "mail.example.com" will be used.
-tlsextdebug
Print out a hex dump of any TLS extensions received from the server.
-no_ticket
Disable RFC4507bis session ticket support.
-sess_out filename
Output SSL session to filename.
-sess_in filename
Load SSL session from filename. The client will attempt to resume a connection from
this session.
-serverinfo types
A list of comma-separated TLS Extension Types (numbers between 0 and 65535). Each
type will be sent as an empty ClientHello TLS Extension. The server's response (if
any) will be encoded and displayed as a PEM file.
-status
Sends a certificate status request to the server (OCSP stapling). The server response
(if any) is printed out.
-alpn protocols, -nextprotoneg protocols
These flags enable the Enable the Application-Layer Protocol Negotiation or Next
Protocol Negotiation (NPN) extension, respectively. ALPN is the IETF standard and
replaces NPN. The protocols list is a comma-separated list of protocol names that the
client should advertise support for. The list should contain the most desirable
protocols first. Protocol names are printable ASCII strings, for example "http/1.1"
or "spdy/3". An empty list of protocols is treated specially and will cause the
client to advertise support for the TLS extension but disconnect just after receiving
ServerHello with a list of server supported protocols. The flag -nextprotoneg cannot
be specified if -tls1_3 is used.
-ct, -noct
Use one of these two options to control whether Certificate Transparency (CT) is
enabled (-ct) or disabled (-noct). If CT is enabled, signed certificate timestamps
(SCTs) will be requested from the server and reported at handshake completion.
Enabling CT also enables OCSP stapling, as this is one possible delivery method for
SCTs.
-ctlogfile
A file containing a list of known Certificate Transparency logs. See
SSL_CTX_set_ctlog_list_file(3) for the expected file format.
-keylogfile file
Appends TLS secrets to the specified keylog file such that external programs (like
Wireshark) can decrypt TLS connections.
-early_data file
Reads the contents of the specified file and attempts to send it as early data to the
server. This will only work with resumed sessions that support early data and when the
server accepts the early data.
-enable_pha
For TLSv1.3 only, send the Post-Handshake Authentication extension. This will happen
whether or not a certificate has been provided via -cert.
-use_srtp value
Offer SRTP key management, where value is a colon-separated profile list.
-srpuser value
Set the SRP username to the specified value. This option is deprecated.
-srppass value
Set the SRP password to the specified value. This option is deprecated.
-srp_lateuser
SRP username for the second ClientHello message. This option is deprecated.
-srp_moregroups This option is deprecated.
Tolerate other than the known g and N values.
-srp_strength number
Set the minimal acceptable length, in bits, for N. This option is deprecated.
-ktls
Enable Kernel TLS for sending and receiving. This option was introduced in OpenSSL
3.2.0. Kernel TLS is off by default as of OpenSSL 3.2.0.
-tfo
Enable creation of connections via TCP fast open (RFC7413).
-no_ssl3, -no_tls1, -no_tls1_1, -no_tls1_2, -no_tls1_3, -ssl3, -tls1, -tls1_1, -tls1_2,
-tls1_3
See "TLS Version Options" in openssl(1).
-dtls, -dtls1, -dtls1_2
These specify the use of DTLS instead of TLS. See "TLS Version Options" in
openssl(1).
-nameopt option
This specifies how the subject or issuer names are displayed. See
openssl-namedisplay-options(1) for details.
-xkey infile, -xcert file, -xchain file, -xchain_build file, -xcertform DER|PEM, -xkeyform
DER|PEM
Set extended certificate verification options. See "Extended Verification Options" in
openssl-verification-options(1) for details.
-CAfile file, -no-CAfile, -CApath dir, -no-CApath, -CAstore uri, -no-CAstore
See "Trusted Certificate Options" in openssl-verification-options(1) for details.
-bugs, -comp, -no_comp, -no_ticket, -serverpref, -client_renegotiation,
-legacy_renegotiation, -no_renegotiation, -no_resumption_on_reneg, -legacy_server_connect,
-no_legacy_server_connect, -no_etm -allow_no_dhe_kex, -prefer_no_dhe_kex,
-prioritize_chacha, -strict, -sigalgs algs, -client_sigalgs algs, -groups groups, -curves
curves, -named_curve curve, -cipher ciphers, -ciphersuites 1.3ciphers, -min_protocol
minprot, -max_protocol maxprot, -record_padding padding, -debug_broken_protocol,
-no_middlebox
See "SUPPORTED COMMAND LINE COMMANDS" in SSL_CONF_cmd(3) for details.
-rand files, -writerand file
See "Random State Options" in openssl(1) for details.
-provider name
-provider-path path
-propquery propq
See "Provider Options" in openssl(1), provider(7), and property(7).
-engine id
See "Engine Options" in openssl(1). This option is deprecated.
-ssl_client_engine id
Specify engine to be used for client certificate operations.
-allow_proxy_certs, -attime, -no_check_time, -check_ss_sig, -crl_check, -crl_check_all,
-explicit_policy, -extended_crl, -ignore_critical, -inhibit_any, -inhibit_map,
-no_alt_chains, -partial_chain, -policy, -policy_check, -policy_print, -purpose,
-suiteB_128, -suiteB_128_only, -suiteB_192, -trusted_first, -use_deltas, -auth_level,
-verify_depth, -verify_email, -verify_hostname, -verify_ip, -verify_name, -x509_strict
-issuer_checks
Set various options of certificate chain verification. See "Verification Options" in
openssl-verification-options(1) for details.
Verification errors are displayed, for debugging, but the command will proceed unless
the -verify_return_error option is used.
-enable_server_rpk
Enable support for receiving raw public keys (RFC7250) from the server. Use of X.509
certificates by the server becomes optional, and servers that support raw public keys
may elect to use them. Servers that don't support raw public keys or prefer to use
X.509 certificates can still elect to send X.509 certificates as usual.
-enable_client_rpk
Enable support for sending raw public keys (RFC7250) to the server. A raw public key
will be sent by the client, if solicited by the server, provided a suitable key and
public certificate pair is configured. Some servers may nevertheless not request any
client credentials, or may request a certificate.
host:port
Rather than providing -connect, the target hostname and optional port may be provided
as a single positional argument after all options. If neither this nor -connect are
provided, falls back to attempting to connect to localhost on port 4433.
CONNECTED COMMANDS (BASIC)
If a connection is established with an SSL/TLS server then any data received from the
server is displayed and any key presses will be sent to the server. If end of file is
reached then the connection will be closed down.
When used interactively (which means neither -quiet nor -ign_eof have been given), and
neither of -adv or -nocommands are given then "Basic" command mode is entered. In this
mode certain commands are recognized which perform special operations. These commands are
a letter which must appear at the start of a line. All further data after the initial
letter on the line is ignored. The commands are listed below.
Q End the current SSL connection and exit.
R Renegotiate the SSL session (TLSv1.2 and below only).
C Attempt to reconnect to the server using a resumption handshake.
k Send a key update message to the server (TLSv1.3 only)
K Send a key update message to the server and request one back (TLSv1.3 only)
CONNECTED COMMANDS (ADVANCED)
If -adv has been given then "advanced" command mode is entered. As with basic mode, if a
connection is established with an SSL/TLS server then any data received from the server is
displayed and any key presses will be sent to the server. If end of file is reached then
the connection will be closed down.
Special commands can be supplied by enclosing them in braces, e.g. "{help}" or "{quit}".
These commands can appear anywhere in the text entered into s_client, but they are not
sent to the server. Some commands can take an argument by ending the command name with ":"
and then providing the argument, e.g. "{keyup:req}". Some commands are only available
when certain protocol versions have been negotiated.
If a newline appears at the end of a line entered into s_client then this is also sent to
the server. If a command appears on a line on its own with no other text on the same line,
then the newline is suppressed and not sent to the server.
The following commands are recognised.
help
Prints out summary help text about the available commands.
quit
Close the connection to the peer
reconnect
Reconnect to the peer and attempt a resumption handshake
keyup
Send a Key Update message. TLSv1.3 only. This command takes an optional argument. If
the argument "req" is supplied then the peer is also requested to update its keys.
Otherwise if "noreq" is supplied the the peer is not requested to update its keys. The
default is "req".
reneg
Initiate a renegotiation with the server. (D)TLSv1.2 or below only.
fin Indicate FIN on the current stream. QUIC only. Once FIN has been sent any further text
entered for this stream is ignored.
NOTES
This command can be used to debug SSL servers. To connect to an SSL HTTP server the
command:
openssl s_client -connect servername:443
would typically be used (https uses port 443). If the connection succeeds then an HTTP
command can be given such as "GET /" to retrieve a web page.
If the handshake fails then there are several possible causes, if it is nothing obvious
like no client certificate then the -bugs, -ssl3, -tls1, -no_ssl3, -no_tls1 options can be
tried in case it is a buggy server. In particular you should play with these options
before submitting a bug report to an OpenSSL mailing list.
A frequent problem when attempting to get client certificates working is that a web client
complains it has no certificates or gives an empty list to choose from. This is normally
because the server is not sending the clients certificate authority in its "acceptable CA
list" when it requests a certificate. By using this command, the CA list can be viewed and
checked. However, some servers only request client authentication after a specific URL is
requested. To obtain the list in this case it is necessary to use the -prexit option and
send an HTTP request for an appropriate page.
If a certificate is specified on the command line using the -cert option it will not be
used unless the server specifically requests a client certificate. Therefore, merely
including a client certificate on the command line is no guarantee that the certificate
works.
If there are problems verifying a server certificate then the -showcerts option can be
used to show all the certificates sent by the server.
This command is a test tool and is designed to continue the handshake after any
certificate verification errors. As a result it will accept any certificate chain (trusted
or not) sent by the peer. Non-test applications should not do this as it makes them
vulnerable to a MITM attack. This behaviour can be changed by with the
-verify_return_error option: any verify errors are then returned aborting the handshake.
The -bind option may be useful if the server or a firewall requires connections to come
from some particular address and or port.
BUGS
Because this program has a lot of options and also because some of the techniques used are
rather old, the C source for this command is rather hard to read and not a model of how
things should be done. A typical SSL client program would be much simpler.
The -prexit option is a bit of a hack. We should really report information whenever a
session is renegotiated.
SEE ALSO
openssl(1), openssl-sess_id(1), openssl-s_server(1), openssl-ciphers(1), SSL_CONF_cmd(3),
SSL_CTX_set_max_send_fragment(3), SSL_CTX_set_split_send_fragment(3),
SSL_CTX_set_max_pipelines(3), ossl_store-file(7)
HISTORY
The -no_alt_chains option was added in OpenSSL 1.1.0. The -name option was added in
OpenSSL 1.1.1.
The -certform option has become obsolete in OpenSSL 3.0.0 and has no effect.
The -engine option was deprecated in OpenSSL 3.0.
The -enable_client_rpk, -enable_server_rpk, -no_rx_cert_comp, -no_tx_cert_comp, and -tfo
options were added in OpenSSL 3.2.
COPYRIGHT
Copyright 2000-2023 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use this file except
in compliance with the License. You can obtain a copy in the file LICENSE in the source
distribution or at <https://www.openssl.org/source/license.html>.