Provided by: ipv6toolkit_2.0+ds.1-2build2_amd64 
NAME
path6 - A versatile IPv6-based traceroute tool
SYNOPSIS
path6 [-d] [-i INTERFACE] [-s SRC_ADDR[/LEN]] [-S LINK_SRC_ADDR] [-D LINK_DST_ADDR] [-y
FRAG_SIZE] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-r LIMIT]
[-p PROBE_TYPE] [-P PAYLOAD_SIZE] [-a DST_PORT] [-X TCP_FLAGS] [-v] [-h]
DESCRIPTION
path6 is an IPv6 traceroute tool, with full support for IPv6 Extension Headers. It is part
of the SI6 Networks' IPv6 Toolkit: a security assessment suite for the IPv6 protocols.
OPTIONS
path6 takes its parameters as command-line options. Each of the options can be specified
with a short name (one character preceded with the hyphen character, as e.g. "-i") or with
a long name (a string preceded with two hyphen characters, as e.g. "--interface").
Most of probe packet details can be specified by means of the available options. When TCP
or UDP probe packets are employed, the Source Port of the probe packets is used to encode
the probe packet number.
The current version of the tool will only print IPv6 addresses and will not try to
reverse-map such IPv6 addresses into hostnames.
-i interface, --interface interface
This option specifies the network interface to be used by the path6 tool. It can be
used for overriding the output interface selected based on the local routing table.
-s SRC_ADDR, --src-address SRC_ADDR
This option specifies the IPv6 source address (or IPv6 prefix) to be used for the
Source Address of the attack packets. If a prefix is specified, the Source Address
is randomly selected from that prefix.
-d DST_ADDR, --dst-address DST_ADDR
This option specifies the IPv6 Destination Address of the target.
-S SRC_LINK_ADDR, --src-link-address SRC_LINK_ADDR
This option can be used to override the link-layer Source Address of the packets.
-D DST_LINK_ADDR, --dst-link-address DST_LINK_ADDR
This option can be used to override the link-layer Destination Address of the
outgoing packets.
-y SIZE, --frag-hdr SIZE
This option specifies that the probe packets must be fragmented. The fragment size
must be specified as an argument to this option.
-u HDR_SIZE, --dst-opt-hdr HDR_SIZE
This option specifies that a Destination Options header is to be included in the
outgoing packet(s). The extension header size must be specified as an argument to
this option (the header is filled with padding options). Multiple Destination
Options headers may be specified by means of multiple "-u" options.
-U HDR_SIZE, --dst-opt-u-hdr HDR_SIZE
This option specifies a Destination Options header to be included in the
"unfragmentable part" of the outgoing packet(s). The header size must be specified
as an argument to this option (the header is filled with padding options). Multiple
Destination Options headers may be specified by means of multiple "-U" options.
-H HDR_SIZE, --hbh-opt-hdr HDR_SIZE
This option specifies that a Hop-by-Hop Options header is to be included in the
outgoing packet(s). The header size must be specified as an argument to this option
(the header is filled with padding options). Multiple Hop-by-Hop Options headers
may be specified by means of multiple "-H" options.
-p PROBE_TYPE, --probe-type PROBE_TYPE
This option specifies the protocol to be used for the probe packets. Possible
arguments are: "icmp" (for ICMPv6 Echo Request), "tcp" (for TCP), and "udp" (for
UDP). If left unspecified, the probe packets default to ICMPv6 Echo Request.
-P PAYLOAD_SIZE, --payload-size PAYLOAD_SIZE
This option specifies the payload size of the probe packets.
-o SRC_PORT, --src-port SRC_PORT
This option specifies the TCP/UDP Source Port. If left unspecified, the Source Port
is randomized from the range 1024-65535.
-a DST_PORT, --dst-port DST_PORT
This option specifies the TCP/UDP Destination Port. If left unspecified, the
Destination Port defaults to 80 for the TCP case, and a randomized value (in the
range 60000-65000) for the UDP case.
-X TCP_FLAGS, --tcp-flags TCP_FLAGS
This option is used to set specific the TCP flags. The flags are specified as "F"
(FIN), "S" (SYN), "R" (RST), "P" (PSH), "A" (ACK), "U" (URG), "X" (no flags).
If this option is left unspecified, the ACK bit is set on all probe packets.
-v, --verbose
This option selects the "verbosity" of the tool. If this option is left
unspecified, only minimum information is printed.
-h, --help
Print help information for the path6 tool.
EXAMPLES
The following sections illustrate typical use cases of the path6 tool.
Example #1
# scan6 -i eth0 -L -e -v
Perform host scanning on the local network ("-L" option) using interface "eth0" ("-i"
option). Use both ICMPv6 echo requests and unrecognized IPv6 options of type 10xxxxxx
(default). Print link-link layer addresses along with IPv6 addresses ("-e" option). Be
verbose ("-v" option).
Example #2
# scan6 -d 2001:db8::/64 --tgt-virtual-machines all --ipv4-host 10.10.10.0/24
Scan for virtual machines (both VirtualBox and vmware) in the prefix 2001:db8::/64. The
additional information about the IPv4 prefix employed by the host system is leveraged to
reduce the search space.
Example #3
# scan6 -d 2001:db8::/64 --tgt-ipv4-embedded ipv4-32 --ipv4-host 10.10.10.0/24
Scan for IPv6 addresses of the network 2001:db8::/64 that embed the IPv4 prefix
10.10.10.0/24 (with the 32-bit encoding).
Example #4
# scan6 -d 2001:db8:0-500:0-1000
Scan for IPv6 addresses of the network 2001:db8::/64, varying the two lowest order 16-bit
words of the addresses in the range 0-500 and 0-1000, respectively.
Example #5
# scan6 -d fc00::/64 --tgt-vendor 'Dell Inc' -p tcp
Scan for network devices manufactured by 'Dell Inc' in the target prefix fc00::/64. The
tool will employ TCP segments as the probe packets (rather than the default ICMPv6 echo
requests).
SEE ALSO
ipv6toolkit.conf(5)
draft-ietf-opsec-ipv6-host-scanning (eal-world>) for a discussion aof
<http://tools.ietf.org/html/draft-gont-v6ops-ipv6-ehs-in-
support of IPv6 packets with extension headers in the IPv6 Internet.
AUTHOR
The path6 tool and the corresponding manual pages were produced by Fernando Gont
<fgont@si6networks.com> for SI6 Networks <http://www.si6networks.com>.
COPYRIGHT
Copyright (c) 2014-2015 Fernando Gont.
Permission is granted to copy, distribute and/or modify this document under the terms of
the GNU Free Documentation License, Version 1.3 or any later version published by the Free
Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. A copy of the license is available at <http://www.gnu.org/licenses/fdl.html>.
PATH6(1)