NAME

       pmdaib - Infiniband performance metrics domain agent (PMDA)

SYNOPSIS

       $PCP_PMDAS_DIR/infiniband/pmdaib [-c configFile] [-D debug] [-d domain] [-l logfile] [-w]

DESCRIPTION

       pmdaib  is  a  Performance  Metrics  Domain  Agent  (PMDA)  which  exports information and
       performance metrics about local Infiniband HCAs and local or remote Infiniband GUIDs.

       A brief description of the pmdaib command line options follows:

       -c   Location  of  the  config   file.    By   default,   the   config   file   is   named
            $PCP_PMDAS_DIR/infiniband/config.  See CONFIG FILE for more information.

       -D   A debug values, as specified by pmdbg (1)

       -d   Specify an alternate performance metrics domain number.  Almost never necessary.

       -l   Location  of  the  log  file.   By  default,  a  log  file named ib.log is written to
            $PCP_LOG_DIR/pmcd.  If the log file cannot be created or is not writable,  output  is
            written to the standard error instead.

       -w   Write  out the default config file to $PCP_PMDAS_DIR/infiniband and exit immediately.
            The written config file will contain the local HCA ports.  It will not  overwrite  an
            existing  file.  This argument should only be used to create the template config file
            and should never appear in pmcd.conf.  See CONFIG FILE for more  information  on  the
            file format and on monitoring remote GUIDs.

CONFIG FILE

       By  default, the PMDA will operate without using a config file.  In this mode of operation
       the local HCA ports will be monitored.  Note that if a new HCA is  added  to  the  machine
       that  instance  domain  naming  may change because it will always be based on the kernel's
       naming.

       In cases where this is not acceptable, or in the case where monitoring  remote  Infiniband
       ports  is  required,  a  config file must be created.  A "template" file can be created by
       running the pmdaib daemon with the -w argument.  This will create a config file  with  the
       local ports and GUIDs.

       If  the  config  file is executable then it will be run and the output will be used as the
       config file.

       The config file is composed of line-based records.  Blank lines and everything  after  the
       hash (#) character are ignored.  Each line has 6 fields:

       [instName] [portGUID] [portNum] via [localPortName]:[localPortNum]

       The  first  field is used to give a static instance name to the Infiniband port that has a
       specific GUID.  All of the other fields must be properly specified in order to  monitor  a
       particular port.

       For  example,  to  monitor  port 1 of the local HCA called 'mthca0' a possible config file
       line would be:

       myPort1 0xdeadbeef01234567 1 via mthca0:1

       Remote ports can be easily monitored by specifying the GUID  of  the  HCA  or  switch  and
       specifying  the  remote port number.  The localPortName:localPortNum tuple specifies which
       local HCA and port to use as the "first hop" in contacting  the  remote  GUID.   E.g.,  to
       monitor  port  13 of a remote switch which is connected to the fabric on the first port of
       the second HCA:

       switch13 0xfeeffeefabcdabcd 13 via mthca1:1

SEE ALSO

       PCPIntro(1), pmcd(1), PMAPI(3) and ibnetdiscover(8).