Provided by: ripit_4.0.0~rc20161009-1_all 
NAME:
Ripit - Perl script to create flac, ogg, mp3, m4a (aac), als (mp4), mpc, wv or other files
from an audio CD.
SYNOPSIS:
ripit [options]
DESCRIPTION:
This Perl script makes it a lot easier to extract and compress sound files from an audio
CD or a local directory with wav/flac files. Although Ripit ensures exact copy of the
digital data with different verification possibilities, it aims to enhance the audio
content for a more userfriendly experience. Tracks can be merged or partially ripped,
hidden tracks (aka pregap tracks or HTOA) and ghost songs are detected and can be split,
like all other tracks, into chunks of sound where silence has been trimmed away. Data
tracks can be omitted to prevent ripper failure or waste of time on such tracks.
Ripit supports Flac, Lame, Oggenc, Faac, mp4als, Musepack, Wavpack and ffmpeg. Artist and
song titles are retrieved either with the CDDB_get.pm perl module from freedb.org or using
WebService::MusicBrainz.pm from MusicBrainz.org. Several encoder formats and qualities or
compression levels can be used in the same run (even the same encoder) and encoded into
different directories. Distributed encoding and launch of more than one encoder process in
the same time is possible.
Retrieval and different modifications of metadata is possible to ensure highly customized
tagging, e.g. adding coverart, detection of Various Artists style at different levels of
strictness or album gain, freedom to add any kind of personal tags and change of encoding
format for tags used in mp3. External commands can be launched before and after ripping /
encoding is done (providing access to all internal variables containing metadata), e.g. to
ensure presence of coverart if not retrieved from coverartarchive.org or discogs.com.
Additional processes take care of calculation of md5sums, generation of playlist files,
creation of toc, cue or inf files e.g. enableing to burn the WAV files with text and no
gaps in DAO mode. It is possible to submit and edit CDDB entries at freedb.org or
submission of MusicBrainz data (ISRCs only) provided a login to access the MB site and of
course to save this metadata locally for later use.
VERSION:
Ripit Version 4.0.0
OPTIONS:
[track_selection]
Tracks to rip from. If not specified, all tracks will be ripped. Specify a single
track by using a single number, or a selection of tracks using numbers separated by
commas or hyphens, e. g. 2,6,10, or 3,5,7-9. Using a number followed by a comma or
hyphen will rip from that track to the end of the CD i. e. 3,5- rips track 3 and
from track 5 to the last one.
To rip only audio tracks and to skip all data tracks (trailing or even in between)
the tweeked argument 1-a might be useful. In this case Ripit will try to detect the
number of audio tracks using cdparanoia toc query.
Default: not set.
--merge ordered list of comma separated intervals.
Place a hyphen (-) or a plus (+) between first and last track number to be merged.
Omitting the last number will merge all subsequent tracks. Separate several
intervals with commas. Do not use this option to merge the whole disc into one
track, use option --cdcue or --book instead. Default: not set.
-I, --span starttime-endtime
Define an interval to be ripped when using cdda2wav or cdparanoia. The hyphen is
mandatory. The format of start and end-time is according to cdparanoia hh:mm:ss.ff
in hours/minutes/seconds/frames, but precision is set to seconds, i. e. frames
will be ignored. Zero fields need not be specified and the value of seconds may be
larger than 60 if no minutes and hours are stated. When using cdda2wav this option
translates the values to the -o and -d options of cdda2wav. When using option
merge, end time is related to the last track in the selection. Default: not set.
-o, --outputdir dir
Full path of directory where the sound should go. If not set, $HOME will be used.
Default: not set.
-d, --device cddevice
Path of the device containing the audio CD, default: /dev/cdrom.
--scsidevice cddevice
Device name for special devices if the non ripping commands (except eject commands)
shall be executed on a different device node. This might be useful for some old
SCSI devices. If not set the cddevice of option --device will be used. Default: not
set.
-r, --ripper number
CD ripper to use, 0 - dagrab, 1 - cdparanoia, 2 - cdda2wav, 3 - rip (Morituri)
(breaking parallelism, experimental), 4 - cdd (support not ensured). When data
tracks are encountered because special track selection 1-a has not been used,
cdparanoia and dagrab are supposed to immediately fail and therefore allow Ripit to
create an error.log so that the encoder process can terminate if problems were
encountered. This might not be the case depending the type of "copyprotection" is
used and on the other hand it could be that cdd2wav may fail on such data tracks
and enables Ripit to continue to rip and encode without endless looping. Use the
appropriate ripper according to your needs and switch the ripper if needed or use
the special track selection to omit data tracks.
Note when using rip (Morituri) alle directories must be defined with option
--dirtemplate, including a separate wav directory which will be created by rip
(Morituri). Further inconveniences might be due to the programs limitations and its
recent development activity with behaviour changing almost dayly, breaking every
wrappers capabilities.
Default: 1 - cdparanoia.
--ripopt options
User definable options for specific ripper. Quote them if necessary. Note that
changing the ripper implies to update this option. Default: not set.
--offset number
User definable sample offset for the CD ripper. This will trigger option -O when
using cdparanoia and option -o when using rip (Morituri). Icedax (cdda2wav) seems
not to provide a sample offset. Default: not set.
-Q, --accuracy number
Check ripped files at AccurateRip using Morituri (rip) which must be installed. One
might need to specify a sample offset (see option --offset) to achieve accuracy.
Default: off.
-Y, --verify number
When using cdparanoia rip track number times until md5sum for 2 rips match, maximum
tries is the number given as argument, default: 1, i.e. no checks will be done.
--nicerip number
Set niceness of ripping process, default: 0.
-Z, --disable-paranoia [number]
When using dagrab, the number of retries will be set to 3, with cdparanoia this
option is equal to the -Z option of cdparanoia. The number can be set to 0
(paranoia on), to 1 (paranoia off) or to 2 to switch paranoia off if a track fails
or gets a timeout. Ripit will retry that failed track without paranoia or give up.
Ripping will then continue with paranoia on. Default: 0 ‐ off, i. e. use paranoia
mode.
--ghost
Analyze each wav for gaps and split it into chunks if gaps are detected and/or try
to trim lead-in/out. This may override option merge. Delete blank tracks if only
silence ("zero bytes") are found. Experimental! Default: off.
--extend seconds
When using option --ghost and only if a chunk of sound is detected, enlarge chunk
by amount of seconds at end if possible (no silence will be added), or track may be
trimmed if value is small (e.g. 0.3), use with caution. Default: 2.0.
--prepend seconds
When using option --ghost and only if a chunk of sound is detected, enlarge chunk
by amount of seconds at beginning, if possible (no silence will be added), or track
may be trimmed if value is small (e.g. 0.3), use with caution. Default: 2.0.
-c, --coder number
Encoder(s) to use, 0 - Lame (for mp3), 1 - Oggenc, 2 - Flac, 3 - Faac, 4 - mp4als,
5 - Musepack, 6 - Wavpack, 7 - ffmpeg, a comma separated list, or as an array. The
same encoder may be stated more than once, but different output-directories must be
specified (to prevent overwriting files with identical path) stating the
--dirtemplate for each encoder or using the $quality parameter in option
--dirtemplate or stating the --tracktemplate for each encoder. See below. Default:
0.
--faacopt Faac-options
Pass other options to the encoder. If the same encoder has been stated more than
once, use a comma separated list. Do not use this option for compression level, use
option --quality instead. Quote them with double quotes if needed; default: not
set.
--flacopt Flac-options
Pass other options to the encoder. If the same encoder has been stated more than
once, use a comma separated list. Do not use this option for compression level, use
option --quality instead. Quote them with double quotes if needed; default: not
set.
--flacdecopt Flac decoding options
Additional options for flac when used to decode flac files. Might be needed to
force (over) writing existing wav files: Default: -s (silent).
--lameopt Lame-options
Pass other options to the encoder. If the same encoder has been stated more than
once, use a comma separated list. Do not use this option for quality settings, use
option --quality instead. Quote them with double quotes if needed; default: not
set.
--museopt Musepack-options
Pass other options to the encoder. If the same encoder has been stated more than
once, use a comma separated list. Do not use this option for quality settings, use
option --quality instead. Quote them with double quotes if needed; default: not
set.
--musenc Musepack-encoder
Choose Musepack encoder to be used, either mpcenc or mppenc for older versions;
default: mpcenc.
--mp4opt Mp4als-options
Pass other options to the encoder. Option -MP4 of encoder mp4als is mandatory to
enable tagging of sound files. Use the appropriate options to alter compression
level and speed. If the same encoder has been stated more than once, use a comma
separated list. Quote them with double quotes if needed; default: not set.
--oggencopt Oggenc-options
Pass other options to the encoder. If the same encoder has been stated more than
once, use a comma separated list. Do not use this option for quality settings, use
option --quality instead. Quote them with double quotes if needed; default: not
set.
--wavpackopt Wavpack-options
Pass other options to the encoder. If the same encoder has been stated more than
once, use a comma separated list. Quote them with double quotes if needed; default:
not set.
--ffmpegopt ffmpeg-options
Pass other options to the encoder. If the ffmpeg has been stated more than once,
use a comma separated list. Quote them with double quotes if needed; default: not
set.
--ffmpegsuffix ffmpeg-suffix
The suffix of the formats to be encoded. If ffmpeg has been stated more than once,
use a comma separated list. Quote them with double quotes if needed; default: not
set.
-q, --quality quality
A comma separated list of values or the word "off", passed in the same order as the
list of encoders. If no encoders passed, follow the order of the config file. This
options name might be misleading as lossless encoders do not have a quality but a
compression level instead. Depending the encoder it refers, this option means:
quality for oggenc: (1-10), highest = 10; compression level for Flac: (0-8), lowest
(but fastest) compression = 0; quality for Lame in vbr mode: (0-9), best quality =
0; or quality for Faac: (10-500), highest = 500; mp4als seems not to accept any
compression level, set to zero; quality for Musepack: (0-10), best quality = 10;
default: 5,3,5,100,0,5. Wavpack and ffmpeg have no quality switch, use encoder
options instead. The value "off" turns option quality off, if supported by the
encoder. Encoders that need a quality or compression level will use default value
in case "off" is used.
E. g. --coder 2,0,1,3 --quality 3,4,5,300 sets compression level for Flac to 3,
Lame-quality to 4, Oggenc-quality to 5 and Faac quality to 300.
-v, --vbrmode mode
Option vbrmode defines variable-bitrate, only used with Lame, the mode is either
new or old, see the Lame manpage. The Lame-option quality will be changed to -V
instead of -q if vbr-mode is used; default: not set.
-b, --bitrate rate
Encode "mp3" at this bitrate for Lame. If option --vbrmode used, bitrate is equal
to the -b option, so one might want to set it "off"; or set if "off" if all options
are passed to --lameopt. Default: 128.
-B, --maxrate rate
Option maxrate (bitrate) for Lame when using --vbrmode is translated to the -B
option in Lame or the -M option in Oggenc, default: 0.
-S, --preset mode
Use the preset switch when encoding with Lame. Combined with option --vbrmode new
the "preset fast" setting will be used. Use --vbrmode old not to use fast VBR.
Mode is one of: insane (320 kbps @ CBR), extreme (256 kbps), standard (192 kbps) or
medium (160 kbps) or any other valid bitrate. Default: off.
-W, --chars [list]
Exclude special characters in file names and path. The argument is optional. The
argument accepts a list of any characters. One might escape the characters or use
double quotes to pass them on the command line. The argument also accepts the
presets NTFS, HFS or off. Following characters will be erased, if no argument
stated or the word NTFS is passed: |\:*?$ plus blanks and periods at beginning and
end of file names and directories. When using the word HFS, only colons will be
purged plus blanks and periods at beginning of file names and directories. Pass the
word "off" as argument to set the option off again. Default: off.
--comment comment
Specify a comment for the comment-tag for Lame, Faac, Musepack and Wavpack, or the
description-tag for Oggenc and Flac. The special comment cddbid or discid will
place the cddbid (used by freedb) or the discid (used for MusicBrainz) into the
comment. See also option --mp3tags, --flactags or --oggtags for more special tags
to be added; default: not set.
-g, --genre genre
Specify (and override CDDB) genre, must be a valid ID3-genre if using Lame, can
(but shouldn't) be anything if using other encoders; default: not set.
-y, --year year
Specify (and override CDDB) the year of year-tag for Lame, Faac, Musepack and
Wavpack or the date-tag for Oggenc and Flac; default: not set.
--coverart number
A number or comma separated list of numbers (if several encoders are used)
according to option --coder with values 0 (no) or 1 (yes); default 0.
--coverpath path
Path to the coverart picture to be included in the metadata of the sound files. The
picture must be present or acquired using e.g. the --precmd option to call a
specific script taking care of the process finding coverart or option --coverorg in
combination with option --mb (see below). This option is mandatory in case
--coverart is used. The full path might be given with variables according to the
--dirtemplate and using same quoting rules. Absolutely no checks about existence of
path will happen and a missing path will not be created so that a wrong argument
might lead to failed downloads when using --coverorg. No checks about existence of
coverart will be done if --interaction is set off. In case of re-encoding the
variable $inputdir can be stated. Default: not set.
--coverorg number
Retrieve coverart from coverartarchive.org using the MusicBrainz release ID (not to
be confused with the discid, used to find the release on MusicBrainz). Furthermore
as an experimental feature discogs.com will be used in case a discogs release ID
was listed on the MusicBrainz release page. But this might be out of order any time
as discogs changes page layout frequently. If a cover is downloaded from
coverartarchive.org all other files will get suffixes in their file names not to
overwrite any files. Note that the --coverpath must be set to save the coverart and
must reflect an existing path. Possible values 0 (no) or 1 (yes), default 0.
--coversize format
Resize the provided coverart picture to a fix value according to ImageMagicks
convert command, either values in the format XXXxYYY or only a width to keep aspect
ratio. The original coverart file will be renamed. Possible values: any valid
format, default: not set.
--copycover path
Full path to any kind of file (e.g. the coverart picture) to be copied into all
directories containing encoded files. The argument might consist of variables
according to the --dirtemplate and using same quoting rules. In case of re-encoding
the variable $inputdir can be stated, default: not set.
--flactags FRAME=tag
Additional tags for flac not passed by the encoder to ensure evaluation of special
tags similar to mp3tags. Use option --flacopt "--tag=FRAME=foo" for additional hard
coded tags instead. When using MusicBrainz additional metadata provided can be
added as tags using the scheme FRAME=frame. Supported are ASIN, BARCODE,
CATALOGNUMBER (using tag "catalog"), CDDID, DGID, DISCID aka MUSICBRAINZ_DISCID
(using tag "discid") and MBREID aka MUSICBRAINZ_ALBUMID (using tag mbreid) with the
tag in lower case, e.g. adding an asin: --flactags=ASIN=asin will evaluate the
lower case asin if the variable is defined. Nothing is added if the metadata is not
available. The option is an array, for each additional frame/tag to be added state
the option once. Default: not set
--mp3tags FRAME=[DESCRIPTION]tag
Additional tags to be added to the mp3 file(s) if encoder does not provide options
for the FRAME or if some unofficial FRAMEs shall be used (e.g. a compilation tag
set to 1: TCMP=1). This option only supports basic (id3v2.4) frames in the format
FRAME=tag (e.g. WCOP=http://id3.org/id3v2.4.0-frames) or FRAME=[DESCRIPTION]tag
(e.g. a user defined text annotation for the description ASIN:
TXXX=[ASIN]B003ZYEQ30). Note that the braces must be stated with some content and
do not stand for optional content. More than one --mp3tags statement can be used
if several tags shall be added. Do not add a COMM frame here as this tag is
supported by (older versions of) Lame and the corresponding option exists in Ripit.
The same goes for the APIC frame which has its own option in Ripit. Newer versions
of Lame may support this tags using Lame option --tv to be passed with Ripits
option --lameopt.
No checks on encoding will happen on content stated here, in case option --utftag
is switched off operator has to ensure encoding of the tags.
Special tags will be evaluated in case the metadata is provided e.g. when using MB
and the TXXX tag. Supported are ASIN, CATALOG, BARCODE, CDDBID, DGID, DISCID aka
"MusicBrainz Disc Id" and MBREID aka "MusicBrainz Album Id" with the tag in lower
case, e.g. --mp3tags TXXX=[ASIN]asin will replace asin with the value if the
variable is defined. Default: not set.
--oggtags FRAME=tag
Additional tags for ogg files similar to --flactags. Default: not set.
--vatag number
Analyze track names for "various artists" style and split the metadata in case one
of the delimiters (colon, hyphen, slash or parenthesis) are found. Use unpair
numbers for the scheme "artist ? tracktitle" and pair numbers in the opposite case.
The artist will be compared to the argument of option --vastring (see below). If
the artist must be like --vastring and each track have a delimiter, use 1 (2), if
the artist must be like --vastring while only some tracks contain the delimiter,
use 3 (4), if no restrictions apply for the artist but all track names must have a
delimiter, use 5 (6) and finally, if only a few tracks contain a delimiter to be
used as splitting point, set --vatag to 7 (8). Default: not set.
--vastring string
A string (regular expression) that defines the "various artists" style, e.g.
Varios|VA. Default: \bVA\b|Variou*s|Various\sArtists|Soundtrack|OST
-D, --dirtemplate '"foo parameters"'
Use single and double quotes to pass the parameters of the templates! Allowed are
any legal characters, slashes for multi-level directories and following parameters:
$album, $artist, $iletter, $genre, $quality, $suffix, $trackname, $tracknum, $year
and $trackno; example: '"$suffix $quality/my_snd_dir/$iletter/$artist/$year ‐
$album"'. The parameter $iletter is the initial letter of the artist name;
$trackno is the total number of tracks of the release, this might be helpful to
distinguish different releases with exactly the same name; $quality might be
needed, if one wants to encode the same format at different qualities in the same
run. Note that $quality reflects the encoder options and not the arguments of
option --quality which might be set to "off". Or state different dirtemplates: the
option is an array, so one can use several different dirtemplates in the same order
as the encoders. If less dirtemplates than encoders are stated, the last
dirtemplate will be used for subsequent encoders and the wav-directory, see
EXAMPLES below, but must be defined for all formats including wav in case rip
(Morituri) is used. Default: '"$artist - $album"'.
-T, --tracktemplate '"foo parameters"'
See above. The tracktemplate is not an array, only one can be stated. Additionally
it allows two more variables helpful in case VA-style is detected: $trackartist,
$tracktitle; note: trackartist will be filled with the value of artist in case no
track artist has been found to respect the templates settings, and tracktitle will
hold the pure trackname. Additional album-artist tags will be written, e.g. TPE2
tag for Lame and the artist field will contain the track artist tag. Default:
'"$tracknum $trackname"'.
--trackoffset number
Give a trackoffset to be added to the $tracknum variable (see above). Might be
useful to join multi disc releases into one directory (and to switch option
--overwrite to "y"). Default: 0.
--addtrackoffset
When using MusicBrainz, check for multi discs releases and automatically add a
calculated --trackoffset to the track counter. Ripit will try to detect already
ripped multi disc releases and temporarily switch option --overwrite to "y" in case
the first track of a multi disc release is not present in an existing directory
corresponding to the dirtemplate.
Negate to switch option off again. Default: not set.
--discno number
Set a counter for the disc when using a multi disc release. This option accepts
any integer; when using MB and --discno is set to 1 the discnumber will be set to
the discnumber according to the presented data (read as: switch option on). Using a
number > 1 will force this number and will not be altered if MB gives a different
disc number. Default: 0.
--sshlist list
Comma separated list of remote machines where Ripit should encode. The output path
must be the same for all machines. Specify the login (login@machine) only if not
the same for the remote machine. Else just state the machine names. See EXAMPLES
for more information, default: not set.
--scp If the file system can not be accessed on the remote machines, scp (copy) the WAV
files to the remote machines, default: off.
--local
Only used with option --sshlist; if all encoding shall be done on remote machines,
use --nolocal, default: on.
--mb Access MusicBrainz DB via WebService::MusicBrainz module instead of freedb (see
below). One needs the discid calculation perl module or command to be installed and
in the path. Negate to switch option off again. A non interactive freedb look-up
will be done to retrieve a genre. Default: off.
--mbrels number
Check each track for additional relationships, only vocal and work relationships
are handled. Possible values 0 (no) or 1 (yes); default: 0.
--mbname login
Give the users MusicBrainz login name to submit ISRCs to the database. Saved in
plain when using a config, default: not set.
--mbpass password
Give the users MusicBrainz password to submit ISRCs to the database. Saved in
plain when using a config, default: not set.
--isrc number
Enable ISRC detection with number = 1 (using icedax) and submission to MusicBrainz.
Note that option --mb must be switched on. Possible values 0 (no) or 1 (yes);
default: 0.
--cdtext numer
Check for CD text if no DB entry found, possible values 0 (no) or 1 (yes); default
0; default: 0
-C, --cddbserver server
CDDB server, either freedb.org, freedb2.org or musicbrainz.org. Default
freedb.org. Note, the full address is "mirror".freedb.org, i. e. default is
freedb.freedb.org. Exception: freedb2.org and musicbrainz.org have no mirrors,
their full addresses are: freedb2.org and freedb.musicbrainz.org on port 80 (see
transfer mode).
-t, --transfer mode
Transfer mode, cddb or http, will set default port to 8880 or 80 (for http),
default: cddb. Note: use http mode with CDDB servers freedb2.org or
musicbrainz.org.
-m, --mirror mirror
Choose "freedb" or one of the possible freedb mirrors, default: freedb. For more
information check the web page www.freedb.org. There is no list of mirrors
available these days. This option might be obsolete as freedb uses random servers,
but the default setting is mandatory.
-L, --protocol level
CDDB protocol level for CDDB query. Level = 6 supports UTF-8 and level = 5 not. Use
level = 5 to suppress UTF-8. Cf. option --utftag below. Default: 6.
-P, --proxy address
The http proxy to use when accessing the cddb server. The CDDB protocol must be
http. Default: not set.
-n, --nice number
Set niceness of encoding process, default: 0.
-a, --archive
Read and/or save CDDB files in $HOME/.cddb/"category" directory using the xmcd
format, where the "category" is one of the 11 CDDB categories or in case
MusicBrainz is used an additional category "musicbrainz" will be used. Default:
off.
-e, --eject
Ejects the CD when finished, if hardware supports it. Use --noeject to switch it
off. Default: off.
--ejectcmd command
Command to be used for ejection or loading of CD tray. Should be specified within
FreeBSD even if option --eject is not used to enable Ripit to load the CD tray. One
does not need to mention the words close or eject or options like -t, Ripit does
it. Default: eject.
--ejectopt options
Options for ejection command to be used for ejection or loading of CD tray.
Default: the path to the CD device.
--halt Powers off the machine when finished if configuration supports it, default: off.
-s, --submission
Specify --nosubmission if the computer is offline and the created file cddb.toc
shall be saved in the home directory instead of being submitted. With option
--archive it will also be saved in the $HOME/.cddb directory. The purpose of this
option is also to permit the user to edit the CDDB data for the own track names &
tags and not to overwrite the original CDDB entry. Default: on.
-M, --mail address
Users return email address, needed for submitting an entry to freedb.org. Default:
not set.
--mailopt options
Additional options, added to sendmail command. The reply-to address will be used
with option -r as defined above. Default: -t
-A, --book number
Create an audiobook file, i. e. merge all tracks into one single file, option
--ghost will be switched off.
If encoder faac is used file suffix will be m4b instead of m4a and a chapter file
will be written for chapter marks. The installed version of faac must support the
-w option to write tags.
Note that options --wav and --cdtoc should also be switched off. Possible values 0
(off) or 1 (on); default: off.
--cdcue number
Number n = 1 or 2 to create cue sheets to burn the wavs with CD-Text. The cue
sheets will be copied to the other file formats. Number 1 will switch option
--ghost on to eliminate chunks of silence. Number 2 is experimental but does not
switch option --ghost on and may be used if number 1 fails. Default: off.
--cdtoc number
Number n = 1 to create a toc file to burn the wavs with CD-Text using cdrdao or
cdrecord. Default: off.
--inf number
Number n = 1 to create inf files to burn the wavs with CD-Text using wodim or
cdrecord. Default: off.
-p, --playlist number
Create the m3u playlist file, or use --playlist 0. For file names without full
path use --playlist 2. Default is full path for file names. Default 1 - on.
-i, --interaction
Specify --nointeraction if ripit shall take the first entry found and rip without
any questioning. Default: on.
--lcd Use lcdproc to display status, default: not set.
--lcdhost
Specify the lcdproc host, default: localhost.
--lcdport
Specify the lcdport, default: 13666.
--infolog file
Log operations (system calls, file/directory creation) to file given with full
path; default: not set.
-l, --lowercase number
Lowercase file names and or directories (from tracktemplate and dirtemplate):
number n = 0, off, 1, on for file names and directories, 2, only for file names, 3,
only for directories, default: off.
-u, --underscore
Use underscores (_) instead of spaces in file names, default: off.
--uppercasefirst
Uppercase first letter of each word in file names and tags. Use this option if the
CDDB entry is uppercase only. Default: off.
-U, --utftag
Keep Lame-tags in UTF-8 or decode them (but not the file names) from UTF-8 to
ISO8859-1. Applies only to mp3 (Lame). May be useful for tags with special
characters and if mp3-player doesn't support Unicode. Using Musepack one might
want to pass the Musepack option --unicode to option museopt. Note that combining
with options --threads (and or --sshlist) may lead to issues and must be regarded
as experimental. Default: off.
--rip Rip the CD, to be used as --norip if wav (or flac) files are present. Previously
used for debugging, may be useful to re-encode existing wav or flac files in a
given --inputdir (see below). Option --inputdir is mandatory in case --norip is
used. Default: not set. Note: this option can not be defined in the config file.
--inputdir directory
Full path to the directory with wav or flac files to be re-encoded using option
--norip. See also option --cdid to get awereness on some unexpected behaviour.
Default: not set. Note: this option can not be defined in the config file.
--cdid id
Give a freedb.ord CDDBID or a musicbrainz discid in case lookup shall be done when
re-encoding wav or flac files and existing track names (of wavs) or tags (in flac
files) should be updated when using --norip. If not stated, ripit will try to
detect an ID in playlist, toc or log files or cue sheets to retrieve local or
online metadata. This means: a look-up may happen even if this option is not
stated. This may lead to some unexpected effects, e.g. differing directory or track
names from those stated in option --inputdir, new tracknumbers in case ghost songs
are present, merged multi disc releases and so on. Default: not set. Note: this
option can not be defined in the config file.
--encode
Do encode the wavs. If only the wav-files shall be created, prevent encoding with
--noencode (and use option --wav, see below). Default: on.
-w, --wav
Keep the wav files after encoding instead of deleting them, default: off.
-N, --normalize
Normalizes the wave-files to a given dB-value (default: -12dB). Default: off.
This is useful when encoding
* for hardware or software that doesn't support the replaygain‐feature
* to audio formats without replaygain capabilities.
--normcmd
Command to use for normalizing, default: normalize.
-z, --normopt
Options to pass to normalize. Possible values:
-a -nndB : Normalize to -nn dB, default is -12dB,
Value range: All values <= 0dB
Example : normalize -a -20dB *.wav
-b : Batch mode ‐ loudness differences between
individual tracks of a CD are maintained
-m : Mix mode ‐ all track are normalized to the
same loudness
-v : Verbose operation
-q : Quiet operation
For further options see normalize documentation (http://normalize.nongnu.org).
Please note that normalizing to a high dB value, e.g. -6dB or less will lead to
severe compression of the audio signal, thus losing sound quality. Keeping the
default value of -12dB is recommended.
Default: -b Option v (q) will be set according to verbosity chosen.
-h, --help
Print this and exit.
-V, --version
Print version and exit.
-x, --verbose number
Run silent (do not output comments, status etc.) (number n = 0), with minimal
output (n = 1), normal without encoder messages (n = 2), normal (n = 3), verbose (n
= 4), extremely verbose (n = 5). Default 3.
--config
Read parameters from config file or specify --noconfig to prevent reading it. A
local config file in $HOME/.ripit/ will have higher priority, only if the local
file does not exist, ripit will try to read /etc/ripit/config. Default: on.
--confname
Read parameters from a specific configuration file if special options are needed,
this might be useful if operator wants different settings for discs containing
music than e.g. audio books. Default: config.
--confdir
Read parameters from a config file in a specific directory, default is
$HOME/.ripit/.
--save Add parameters passed on command line to an existing config file. This does not
overwrite other existing settings. Options of an existing config file will be
adopted and the old file saved as config.old no matter if a file named config.old
already exists. Default: off.
--savenew
Save all parameters passed on command line to a new config file, backup an existing
file to config.old no matter if a file named config.old already exists. Creates a
default config file if no options are passed on command line. Default: off.
--loop value
After ejection of the previous CD continue ripping and encoding as soon as a new CD
has been fed. This option forces ejection (--eject). The value is either 0 for
normal use (single run) or 1 for (standard) looping. Experimental value 2 might be
used to force immediate restart of the ripping process even if encoder did not yet
complete. This will spoil the output, this will show the prompt although a child
process is running (waiting for a new CD) and must be terminated explicitly.
The config file will be read out on each run just before ejection of the disc. In
case one alters the config file after ejection, close the tray with the disc
already done for re-reading the config and re-ejection of the disc. Therefore it
might be useful to pass as few options as possible on the CL when using option
--loop, because options passed on the CL can of course not be alterd with the
config file during a loop.
Default: off.
--quitnodb value
Give up CD if no CDDB entry found. Useful if option --loop or --nointeraction are
on. Default behaviour is to let operator enter data or to use default artist, album
and track names. Possible values: 0 - off, 1 - on, default: off
--resume
Resume a previously started session. Default: off.
-O, --overwrite argument
Default behaviour of Ripit is not to overwrite existing directories, a suffix will
be added if directory name exists. Use option overwrite to prevent this and either
overwrite a previous rip (y) or force Ripit to quit (q) or even eject the disc (e).
If ejection is chosen, the disc will be ejected even if option --eject has not been
switched on. Default: off (n)
--dpermission number
Change the directory permission to number. Default: 0755.
--fpermission number
Change the file permission to number. Default: 0644.
--md5sum
Create a MD5-sum file for each type of sound files.
--threads number
Comma separated list of numbers giving maximum of allowed encoders to run at the
same time. In conjunction with option sshlist the number for the local machine is
mandatory and must be stated first. Default: 1.
-X, --execmd command
State a command to be executed when ripit finished. The same variables as in the
dirtemplate can be stated. When using MusicBrainz one can try to use $cd{asin} to
pass the ASIN to the command to be executed. Make sure to escape the command if
needed. Default: not set.
--precmd command
State a command to be executed before ripping started. The same variables as in the
dirtemplate can be stated. When using MusicBrainz one can try e.g. to use $cd{asin}
to pass the ASIN to the command to be executed, which might be useful when
executing a script to retrieve coverart from a site. Make sure to escape the
command if needed. Default: not set.
EXAMPLES
To specify a CD device, type
ripit --device /dev/sr1
To specify the output directory, type
ripit --outputdir /foo/paths/
To rip and encode a special track selection, type
ripit 1,3-6,8-11
To use several encoders in the same run, type
ripit --coder 1,0,2 --quality 3,5,6
In case many encoders are desired, option --threads may be handy on a multicore CPU
(omitting any quality settings in this example)
ripit --coder 0,1,2,4 --threads 4
To use Lame with variable bitrate (VBR), type
ripit --vbrmode new --bitrate 0
Note, one should reset the --bitrate to 0 (zero) if the -b option of Lame is not desired.
According to VBR mode in Lame, use "new" or "old".
It is recommended to use the preset switches for Lame, (see Lame man-page) and specify
fast encoding with --vbrmode new (use --vbrmode old to switch off the fast encoding)
ripit --preset extreme --vbrmode new
To pass options related to the encoder use the according encoder option switch: e.g. to
use the managed mode with oggenc:
ripit -c 1 --oggencopt "--managed -b 192 -M 224 -m 96" --quality "off"
Check for ghost songs and trim very long lead-in/out of each track:
ripit --ghost --prepend 2.0 --extend 2.0
Encode the same format in 2 qualities, at low quality for a portable, at high quality for
home:
ripit --dirtemplate '"cbr/$artist/$year ‐ $album"' \
--dirtemplate '"preset/$artist ‐ $album"' \
--coder 0,0 --bitrate off --quality off,off \
--lameopt "-b 128 -q 2,--preset extreme"
Force Ripit to use one and the same directory for all sound files:
ripit --dirtemplate '"/"' --outputdir="/media/sound" \
--resume
To normalize the wave-files prior to encoding:
ripit --normalize
To normalize the files to -18dB using "mix mode" (see normalize documentation)
ripit --normalize --normopt "-m -a -18dB"
Add coverart retrieved from coverartarchive to the encoded files. Note that instead of a
full path ('"/home/me/$artist - $album/cover.jpg"') the evaluated internal variable
$wavdir has been used to ensure that the cover goes to the right place in case Ripit
alters the $wavdir with some suffix to preven overwriting.
ripit --noconfig -d /dev/cdrom -r 1 -c 2 --mb \
--coverart 1 --coverorg 1 --coverpath '"/$wavdir/cover.jpg"'
Update a config file in ~/home/.ripit/ with options: to use Lame and Oggenc, don't create
a m3u file, archive the CDDB entry files in ~/.cddb/"category"/ and to eject CD when done,
type
ripit --coder 0,1 --playlist 0 --archive --eject --save
To do the job without any interaction, type
ripit --nointeraction
Re-encode wav or flac files in inputdir using a special configuration file with settings
according for re-encoding (e.g. switched overwrite mode on and use MusicBrainz to enable
detection of track-offsets)
ripit --confname config_4.0.0_reenc --inputdir "/home/me/sound/2c - We shall
see/flac" --norip
Rip only first 30 seconds of each track (useful for testing)
ripit --span 0-30
To use a network for encoding, make sure that the output paths are equal on all machines.
ripit --sshlist sun,saturn,earth
where sun, saturn and earth are remote machines on which a user can login via ssh without
entering a password or passphrase! Note that the paths must be equal for the user on all
remote machines! If the login is different on some machines, try
ripit --sshlist login1@sun,login2@saturn,login3@earth
If there is "no" identical path on the remote machines, then the user might enter e.g.
/tmp/ as output directory. If the file-system is not mounted on each remote machine, one
can try to copy the wavs to the remote machines using option --scp.
ripit --sshlist sun,saturn,earth --scp
FILES
User config file (/etc/ripit/config will only be used if there is no $HOME/.ripit/config):
$HOME/.ripit/config
/etc/ripit/config
/usr/share/doc/packages/ripit/README
/usr/share/doc/packages/ripit/HISTORY
/usr/share/doc/packages/ripit/LICENSE
BUGS
Probably there are more than some.
SEE ALSO
cdparanoia(1), lame(1), oggenc(1), flac(1), normalize(1), cdda2wav(1), ffmpeg(1)
AUTHORS
Ripit is maintained by Felix Suwald, please send bugs, wishes comments to
ripit_[at]_suwald_[dot]_com with a concise subject.
For bugs, wishes and comments about lcdproc, please contact
max.kaesbauer_[at]_gmail_[dot]_com.
Former maintainer: Mads Martin Joergensen; RipIT was originally developed by Simon
Quinn.
This manpage was originally created for the Debian GNU/Linux system by help2man 1.36 and
optimized by Elimar Riesebieter <riesebie@lxtec.de>, enhanced and updated by the
maintainer.