NAME

       sidplayfp - a C64 and SID chip emulator for playing Commodore 64 music.

SYNOPSIS

       sidplayfp [OPTIONS] datafile

DESCRIPTION

       Sidplayfp is a music player that emulates various components from a Commodore 64 (C64)
       computer.  The result is a program which can load and execute C64 machine code programs
       which produce music and sound.  Sidplayfp has been designed for accuracy which results in
       a quite high cpu usage.  Additional playback modes have however been provided to allow
       playback on low specification machines at the cost of accuracy.

OPTIONS

       -h, --help
           Display help.

       -h, --help-debug
           Display additional options helpful for debugging.

       -f<num>
           Set audio output frequency in Hz (default: 48000).

       -nf No filter emulation.  This will reduce CPU overhead at the cost of reduced emulation
           quality.

       -s  Stereo playback.  If the tune is identified as stereo then sid 1 and 2 become the left
           and right channels respectively.  For three sid tunes the chips are mixed as left,
           center and right.

       -m  Mono playback.

       -v|q[level]
           Verbose or quiet (no time display) console output while playing.  Can include an
           optional level, defaults to 1.

       -b<num>
           Set start time in [mins:]secs[.milli] format (compatible with sid2wav).

       -ds<addr>
           Force dual sid environment by adding a second chip at specified address.  This forces
           emulation of 2 sid-chips for stereo playback even if datafile is identified as only
           being mono.  This occurs in the case of the stereo prg format as currently there is no
           way to identify them.  Stereo MUS and SID files are however automatically detected.
           The second sid may be installed in the 0xD420-0xD7FF or 0xDE00-0xDFFF address range.
           Address may  be specified in exadecimal (e.g -ds0xd420) or decimal (e.g.  -ds54304)
           format.

       -ts<addr>
           Add a third chip at specified address.  The sid may be installed in the 0xD420-0xD7FF
           or 0xDE00-0xDFFF address range.  Address may  be specified in exadecimal (e.g
           -ts0xd440) or decimal (e.g.  -ts54336) format.

       -u<num>
           Mute a channel.  May be used more than one time.  Channel 1 to 3 are for the first SID
           chip while channels from 4 to 6 are for the second one and 7 to 9 for the third.

       -g<num>
           Mute samples.  May be used more than one time, 1 for the first SID, 2 for the second
           one and 3 for the third.

       -p<num>
           Set bit precision for file saving. The default is 16 to create 16 bit signed samples,
           but can be set to 32 (32 bit float). Other values will cause invalid output.

       -o<num>
           Select start track number (default: preset).

       -o<l|s> [num]
           Option 'l' will select continuous track looping while 's' will play only the current
           track ignoring the others.  The options can be combined and may include the track
           selection.  The following variations are possible: -ol<num>: will loop selected track
           allowing moving to another one; -os<num>: will play selected track and then stop;
           -ols<num>: will loop selected track;

       -t<num>
           Set play length in [mins:]secs[.milli] format (0 is endless).

       -v<n|p>[f]
           Set VIC clock speed.  'n' is NTSC (America, 60Hz) and 'p' is PAL (Europe, 50Hz).
           Providing an 'f' will prevent speed fixing that tries to compensate automatically for
           the speed difference.  Removing speed fixing simulates what happens on a real C64.
           Options can be written as: -vnf or -vn -vf.

       -m<o|n>[f]
           Set SID chip model.  'o' is the old 6581 and 'n' is the new 8580.  Providing an 'f'
           will force the selected model overriding the one specified by the tune.

       --digiboost
           Enable digiboost hack for 8580 model so the digi samples become audible.

       -r<i|r>[f]
           Set resampling mode.  'i' is interpolation (less expensive) and 'r' resampling
           (accurate).  Providing an 'f' will provide faster resampling sacrificing quality.
           Fast resampling is available only for reSID emulation.  Options can be written as:
           -rif or -ri -rf.

       -w, --wav[name]
           Create WAV-file.  The default output filename is <datafile>[n].wav where [n] is the
           tune number should there be more than one in the sid.  This allows batch conversion of
           sid tunes without them overwriting each other.  By providing a name it is possible to
           override this default behavior.  The output file will be <name> with no tune number
           added and the extension .wav appended if no extension is given.

       --au[name]
           Create AU-file.  The default output filename is <datafile>[n].au. Same notes as the
           wav file applies.

       --resid
           Use VICE's original reSID emulation engine.

       --residfp
           Use reSIDfp emulation engine.

       --hardsid
           Use HardSID device.

       --exsid
           Use exSID device.

       --cpu-debug
           Display cpu register and assembly dumps, available only for debug builds.

       --delay=[num]
           Simulate c64 power on delay as number of cpu cycles.  If greater than 8191 the delay
           will be random.  This is the default.

       --fcurve=<num>|auto
           Controls the filter curve in the ReSIDfp emulation.  Ranges from 0.0 (light) to 1.0
           (dark), the default value is 0.5.  If set to auto it will choose a predefined value
           for 6581 depending on the tune author.

       --frange=<num>|auto
           If available controls the filter range for the 6581 in the ReSIDfp emulation.  Ranges
           from 0.0 (light) to 1.0 (dark), the default value is 0.5.  If set to auto it will
           choose a predefined value for 6581 depending on the tune author.

       -cw<w|a|s>
           Set the strength (width) of combined waveforms.  'w' for weak (thin) waves, 'a' for
           average waves, and 's' for strong (wide) waves.

       --noaudio
           Run without an audio output device.

       --nosid
           Run without sid emulation.

       --none
           Run with no audio output device and no sid emulation.

Key bindings

       1-9 Mute/unmute voice.

       q,w,e
           Mute/unmute samples.

       f   Toggle filter.

       p   Pause/unpause playback.

       Esc Quit player.

       Up/Down Arrows
           Increase/reset playback speed.

       Left/Right Arrows
           Move to previous/next subtune.

       Home/End Arrows
           Go to first/last subtune.

ENVIRONMENT VARIABLES

       HVSC_BASE
           The path to the HVSC base directory. If specified the songlength DB will be loaded
           from here and relative SID tune paths are accepted.

FILES

       sidplayfp.ini
           The configuration file. See sidplayfp.ini(5) for further details.

       kernal
           The c64 kernal rom dump file.

       basic
           The c64 basic rom dump file.

       chargen
           The c64 character generator rom dump file.

BUGS

       The upstream bug tracker can be found at
       <https://github.com/libsidplayfp/sidplayfp/issues/>.

SEE ALSO

       sidplayfp.ini(5)

NOTES

       ROM dumps are not embedded due to copyright issues and must be supplied by the user.
       Check the sidplayfp.ini(5) documentation for configuration details and default search
       paths.

AUTHORS

       Leandro Nini
           Current maintainer.

       Simon White
           Wrote the original Sidplay2.

       Dag Lem
           Wrote the reSID emulation engine.

       Antti S. Lankila
           Wrote the reSIDfp emulation engine as a fork of reSID 0.16.

       The Vice team
           Large part of the emulation is based on the VICE's code.

       Andre Fachat
           Wrote the original reloc65 utility.

       Michael Schwendt
           Wrote the original SidTune library and MD5 class (based on work by L. Peter Deutsch).

       Mikko Kilponen
           Wrote the original man page.

RESOURCES

       Home page: <https://github.com/libsidplayfp/>
       Sidplay2 homepage: <http://sidplay2.sourceforge.net/>
       High Voltage Sid Collection (HVSC): <http://hvsc.c64.org/>

COPYING

       Copyright (C) 2000-2004 Simon White
       Copyright (C) 2007-2010 Antti Lankila
       Copyright (C) 2009-2015 VICE Project
       Copyright (C) 2010-2024 Leandro Nini

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as published by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
       Boston, MA  02110-1301, USA.