Provided by: syslinux_6.04~git20190206.bf6db5b4+dfsg1-3ubuntu4_amd64 
NAME
syslinux - install the SYSLINUX bootloader on a FAT filesystem
SYNOPSIS
syslinux [OPTIONS] device
DESCRIPTION
Syslinux is a boot loader for the Linux operating system which operates off an MS-
DOS/Windows FAT filesystem. It is intended to simplify first-time installation of Linux,
and for creation of rescue and other special-purpose boot disks.
In order to create a bootable Linux floppy using Syslinux, prepare a normal MS-DOS
formatted floppy. Copy one or more Linux kernel files to it, then execute the command:
syslinux --install /dev/fd0
This will alter the boot sector on the disk and copy a file named ldlinux.sys into its
root directory.
On boot time, by default, the kernel will be loaded from the image named LINUX on the boot
floppy. This default can be changed, see the section on the syslinux configuration file.
If the Shift or Alt keys are held down during boot, or the Caps or Scroll locks are set,
syslinux will display a lilo(8) -style "boot:" prompt. The user can then type a kernel
file name followed by any kernel parameters. The SYSLINUX bootloader does not need to know
about the kernel file in advance; all that is required is that it is a file located in the
root directory on the disk.
Syslinux supports the loading of initial ramdisks (initrd) and the bzImage kernel format.
OPTIONS
-i, --install
Install SYSLINUX on a new medium, overwriting any previously installed bootloader.
-U, --update
Install SYSLINUX on a new medium if and only if a version of SYSLINUX is already
installed.
-s, --stupid
Install a "safe, slow and stupid" version of SYSLINUX. This version may work on
some very buggy BIOSes on which SYSLINUX would otherwise fail. If you find a
machine on which the -s option is required to make it boot reliably, please send as
much info about your machine as you can, and include the failure mode.
-f, --force
Force install even if it appears unsafe.
-r, --raid
RAID mode. If boot fails, tell the BIOS to boot the next device in the boot
sequence (usually the next hard disk) instead of stopping with an error message.
This is useful for RAID-1 booting.
-d, --directory subdirectory
Install the SYSLINUX control files in a subdirectory with the specified name
(relative to the root directory on the device).
-t, --offset offset
Indicates that the filesystem is at an offset from the base of the device or file.
--once command
Declare a boot command to be tried on the first boot only.
-O, --clear-once
Clear the boot-once command.
-H, --heads head-count
Override the detected number of heads for the geometry.
-S, --sectors sector-count
Override the detected number of sectors for the geometry.
-z, --zipdrive
Assume zipdrive geometry (--heads 64 --sectors 32).
FILES
Configuration file
All the configurable defaults in SYSLINUX can be changed by putting a file called
syslinux.cfg in the install directory of the boot disk. This is a text file in either UNIX
or DOS format, containing one or more of the following items (case is insensitive for
keywords).
This list is out of date.
In the configuration file blank lines and comment lines beginning with a hash mark (#) are
ignored.
default kernel [ options ... ]
Sets the default command line. If syslinux boots automatically, it will act just as
if the entries after "default" had been typed in at the "boot:" prompt.
If no DEFAULT or UI statement is found, or the configuration file is missing
entirely, SYSLINUX drops to the boot: prompt with an error message (if NOESCAPE is
set, it stops with a "boot failed" message; this is also the case for PXELINUX if
the configuration file is not found.)
NOTE: Until SYSLINUX 3.85, if no configuration file is present, or no
"default" entry is present in the configuration file, the default is "linux auto".
Even earlier versions of SYSLINUX used to automatically
append the string "auto" to whatever the user specified using the DEFAULT command.
As of version 1.54, this is no longer true, as it caused problems when using a
shell as a substitute for "init." You may want to include this option manually.
append options ...
Add one or more options to the kernel command line. These are added both for
automatic and manual boots. The options are added at the very beginning of the
kernel command line, usually permitting explicitly entered kernel options to
override them. This is the equivalent of the lilo(8)
"append" option.
label label
kernel image
append options ...
Indicates that if label is entered as the kernel to boot, syslinux should instead
boot image, and the specified "append" options should be used instead of the ones
specified in the global section of the file (before the first "label" command.) The
default for image is the same as label, and if no "append" is given the default is
to use the global entry (if any). Use "append -" to use no options at all. Up to
128 "label" entries are permitted.
The "image" doesn't have to be a Linux kernel; it can be a boot sector (see
below.)
implicit flag_val
If flag_val is 0, do not load a kernel image unless it has been explicitly named in
a "label" statement. The default is 1.
timeout timeout
Indicates how long to wait at the "boot:" prompt until booting automatically, in
units of 1/10 s. The timeout is cancelled as soon as the user types anything on the
keyboard, the assumption being that the user will complete the command line already
begun. A timeout of zero will disable the timeout completely, this is also the
default. The maximum possible timeout value is 35996; corresponding to just below
one hour.
serial port [ baudrate ]
Enables a serial port to act as the console. "port" is a number (0 = /dev/ttyS0 =
COM1, etc.); if "baudrate" is omitted, the baud rate defaults to 9600 bps. The
serial parameters are hardcoded to be 8 bits, no parity, 1 stop bit.
For this directive to be guaranteed to work properly, it should be the first
directive in the configuration file.
font filename
Load a font in .psf format before displaying any output (except the copyright line,
which is output as ldlinux.sys itself is loaded.) syslinux only loads the font onto
the video card; if the .psf file contains a Unicode table it is ignored. This only
works on EGA and VGA cards; hopefully it should do nothing on others.
kbdmap keymap
Install a simple keyboard map. The keyboard remapper used is very simplistic (it
simply remaps the keycodes received from the BIOS, which means that only the key
combinations relevant in the default layout - usually U.S. English - can be
mapped) but should at least help people with AZERTY keyboard layout and the
locations of = and , (two special characters used heavily on the Linux kernel
command line.)
The included program keytab-lilo.pl(8) from the lilo(8)
distribution can be used to create such keymaps.
display filename
Displays the indicated file on the screen at boot time (before the boot: prompt, if
displayed). Please see the section below on DISPLAY files. If the file is missing,
this option is simply ignored.
prompt flag_val
If flag_val is 0, display the "boot:" prompt only if the Shift or Alt key is
pressed, or Caps Lock or Scroll lock is set (this is the default). If flag_val is
1, always display the "boot:" prompt.
f1 filename
f2 filename
...
f9 filename
f10 filename
f11 filename
f12 filename
Displays the indicated file on the screen when a function key is pressed at the
"boot:" prompt. This can be used to implement pre-boot online help (presumably for
the kernel command line options.)
When using the serial console, press <Ctrl-F><digit> to get to the help screens,
e.g. <Ctrl-F>2 to get to the f2 screen. For f10-f12, hit <Ctrl-F>A, <Ctrl-F>B,
<Ctrl-F>C. For compatiblity with earlier versions, f10 can also be entered as
<Ctrl-F>0.
Display file format
DISPLAY and function-key help files are text files in either DOS or UNIX format (with or
without <CR>). In addition, the following special codes are interpreted:
<FF> = <Ctrl-L> = ASCII 12
Clear the screen, home the cursor. Note that the screen is filled with the current
display color.
<SI><bg><fg>, <SI> = <Ctrl-O> = ASCII 15
Set the display colors to the specified background and foreground colors, where
<bg> and <fg> are hex digits, corresponding to the standard PC display attributes:
0 = black 8 = dark grey
1 = dark blue 9 = bright blue
2 = dark green a = bright green
3 = dark cyan b = bright cyan
4 = dark red c = bright red
5 = dark purple d = bright purple
6 = brown e = yellow
7 = light grey f = white
Picking a bright color (8-f) for the background results in the corresponding dark
color (0-7), with the foreground flashing.
colors are not visible over the serial console.
<CAN>filename<newline>, <CAN> = <Ctrl-X> = ASCII 24
If a VGA display is present, enter graphics mode and display the graphic included
in the specified file. The file format is an ad hoc format called LSS16; the
included Perl program "ppmtolss16" can be used to produce these images. This Perl
program also includes the file format specification.
The image is displayed in 640x480 16-color mode. Once in graphics mode, the
display attributes (set by <SI> code sequences) work slightly differently: the
background color is ignored, and the foreground colors are the 16 colors specified
in the image file. For that reason, ppmtolss16 allows you to specify that certain
colors should be assigned to specific color indicies.
Color indicies 0 and 7, in particular, should be chosen with care: 0 is the
background color, and 7 is the color used for the text printed by SYSLINUX itself.
<EM>, <EM> = <Ctrl-U> = ASCII 25
If we are currently in graphics mode, return to text mode.
<DLE>..<ETB>, <Ctrl-P>..<Ctrl-W> = ASCII 16-23
These codes can be used to select which modes to print a certain part of the
message file in. Each of these control characters select a specific set of modes
(text screen, graphics screen, serial port) for which the output is actually
displayed:
Character Text Graph Serial
------------------------------------------------------
<DLE> = <Ctrl-P> = ASCII 16 No No No
<DC1> = <Ctrl-Q> = ASCII 17 Yes No No
<DC2> = <Ctrl-R> = ASCII 18 No Yes No
<DC3> = <Ctrl-S> = ASCII 19 Yes Yes No
<DC4> = <Ctrl-T> = ASCII 20 No No Yes
<NAK> = <Ctrl-U> = ASCII 21 Yes No Yes
<SYN> = <Ctrl-V> = ASCII 22 No Yes Yes
<ETB> = <Ctrl-W> = ASCII 23 Yes Yes Yes
For example:
<DC1>Text mode<DC2>Graphics mode<DC4>Serial port<ETB>
... will actually print out which mode the console is in!
<SUB> = <Ctrl-Z> = ASCII 26
End of file (DOS convention).
Other operating systems
This version of syslinux supports chain loading of other operating systems (such as MS-DOS
and its derivatives, including Windows 95/98).
Chain loading requires the boot sector of the foreign operating system to be stored in a
file in the root directory of the filesystem. Because neither Linux kernels, nor boot
sector images have reliable magic numbers, syslinux will look at the file extension. The
following extensions are recognised:
none or other Linux kernel image
BSS Boot sector (DOS superblock will be patched in)
BS Boot sector
For filenames given on the command line, syslinux will search for the file by adding
extensions in the order listed above if the plain filename is not found. Filenames in
KERNEL statements must be fully qualified.
Novice protection
Syslinux will attempt to detect if the user is trying to boot on a 286 or lower class
machine, or a machine with less than 608K of low ("DOS") RAM (which means the Linux boot
sequence cannot complete). If so, a message is displayed and the boot sequence aborted.
Holding down the Ctrl key while booting disables this feature.
The compile time and date of a specific syslinux version can be obtained by the DOS
command "type ldlinux.sys". This is also used as the signature for the LDLINUX.SYS file,
which must match the boot sector
Any file that syslinux uses can be marked hidden, system or readonly if so is convenient;
syslinux ignores all file attributes. The SYSLINUX installed automatically sets the
readonly attribute on LDLINUX.SYS.
Bootable CD-ROMs
SYSLINUX can be used to create bootdisk images for El Torito-compatible bootable CD-ROMs.
However, it appears that many BIOSes are very buggy when it comes to booting CD-ROMs. Some
users have reported that the following steps are helpful in making a CD-ROM that is
bootable on the largest possible number of machines:
• Use the -s (safe, slow and stupid) option to SYSLINUX
• Put the boot image as close to the beginning of the ISO 9660 filesystem as
possible.
A CD-ROM is so much faster than a floppy that the -s option shouldn't matter from a speed
perspective.
Of course, you probably want to use ISOLINUX instead. See the documentation file
isolinux.doc.
Booting from a FAT partition on a hard disk
SYSLINUX can boot from a FAT filesystem partition on a hard disk (including FAT32). The
installation procedure is identical to the procedure for installing it on a floppy, and
should work under either DOS or Linux. To boot from a partition, SYSLINUX needs to be
launched from a Master Boot Record or another boot loader, just like DOS itself would. A
sample master boot sector (mbr.bin) is included with SYSLINUX.
BUGS
I would appreciate hearing of any problems you have with SYSLINUX. I would also like to
hear from you if you have successfully used SYSLINUX, especially if you are using it for a
distribution.
If you are reporting problems, please include all possible information about your system
and your BIOS; the vast majority of all problems reported turn out to be BIOS or hardware
bugs, and I need as much information as possible in order to diagnose the problems.
There is a mailing list for discussion among SYSLINUX users and for announcements of new
and test versions. To join, send a message to majordomo@linux.kernel.org with the line:
subscribe syslinux
in the body of the message. The submission address is syslinux@linux.kernel.org.
SEE ALSO
lilo(8), keytab-lilo.pl(8), fdisk(8), mkfs(8), superformat(1).
AUTHOR
This manual page is a modified version of the original syslinux documentation by H. Peter
Anvin <hpa@zytor.com>. The conversion to a manpage was made by Arthur Korn
<arthur@korn.ch>.