Provided by: z80asm_1.8-2_amd64 
NAME
z80asm - assembler for the Z80 microprocessor
SYNOPSIS
z80asm [options] [files...]
DESCRIPTION
Z80asm is an assembler for Z80 assembly. If no input files are specified, stdin is used.
If no output file is specified, "a.bin" is used. If "-" is specified as output file,
stdout is used. This makes it possible to use the assembler in a pipeline.
When multiple input files are specified, the assembler first uses all files which were
specified with -i or --input, in the order given. After that, all files which were
specified as non-option arguments are assembled, also in the order given.
OPTIONS
-h, --help
Show summary of options and exit.
-V, --version
Display version information and exit.
-v, --verbose
Be verbose. Specify multiple times to be more verbose. Messages are sent to
standard error.
-l, --list[=filename]
Write a list file. No filename or '-' means stderr.
-L, --label[=filename]
Write a label file. No filename or '-' means stderr.
-p, --label-prefix=prefix
prefix all labels with this prefix.
-i, --input=filename
Specify an input file (-i may be omitted). '-' means stdin.
-o, --output=filename
Specify the output file. '-' or completely omitting the option means stdout.
-I, --includepath=dirname
Add a directory to the include path. The order in which the directories are tried
is from back to front: the last directory specified has the highest priority.
"/usr/share/z80asm" is always in the include path (with lowest priority), you don't
have to specify it.
-f, --force
Produce output even in case of errors. Normally the output, list and label files
are removed when assembly is unsuccesful.
ASSEMBLER DIRECTIVES
All mnemonics and registers are case insensitive. All other text (in particular, labels
and macros) are not. Undocumented opcodes are as much as possible supported:
sll and sli are equal and can both be used.
ixh, ixl, iyh and iyl can be used.
Assembler directives are:
incbin 'filename'
Include a binary file into the resulting assembled file. This can be used to
include text files, or images, sound files, etc. The filename is searched for in
the current directory, and then in the include path, just like for include. Also
like for include, the quotes can be any character (but must match) and no
substitution is performed (so ~ is not your home directory).
defb or db arg, arg, arg, ...
Define bytes.
defm or dm "String", 'String'
Define message. Each character in the string is stored as one byte. Backslash
escapes are allowed, as in characters in expressions. Unlike the argument for
include, the quotes must really be quotes (but they can be single or double quotes.
The closing quote must match the opening quote.)
defb/db and defm/dm are really aliases; either can take both quoted strings and numbers:
defb "This text should be in a buffer\r\n", 0
defs or ds count [, value]
Define space. count bytes are reserved. Each of them is initialised to the
specified value, or 0 if no value is specified.
defw or dw arg, arg, arg, ...
Define words. Each argument is stored as two bytes, the low order byte first.
end End assembly of this source file. Any remaining lines are copied into the list
file (if present), but not assembled.
label: equ expression
Define label to have value expression.
if expression
code block 1
else
code block 2
else
code block 3
...
code block n
endif
Conditionally assemble code. If expression is not 0, all odd code blocks are
assembled, if expression is 0, all even blocks are assembled. Usually only one or
two code blocks are present.
include 'file'
Include file into the source. The quotes around the file for include are
mandatory, but you can choose the quotes yourself. eg, you may use % or even a
letter as a quote. The filename does not undergo any expansion, so \, ~, $, etc
are passed as written (which means ~ will not be your home directory.) The
filename is used as specified, and then prefixed with each directory in the include
path, until it can be opened.
label: macro arg1, arg2, ...
code block
endif
Define a macro. The macro can be used where an opcode is expected. The code block
is then substituted, with the given values for the arguments. This is a textual
substitution, so the following example is valid:
makelabel name
label_name:
endm
This will generate a label with a constructed name (it's not a very useful example,
but it shows the possiblities).
org address
Set the "program counter" to address. This does not add any bytes to the resulting
binary, it only determines how the rest of the code is interpreted (in particular,
the value of labels and $).
seek offset
Seek to position offset in the output file. This can be used for overwiting
previously assembled code, for example for patching a binary which was included
using incbin.
EXPRESSIONS
All expressions can use the following operators, in order of precedence: (a, b and c
denote subexpressions)
a ? b : c
If a is not zero, return b, otherwise c
a | b bitwise or
a ^ b bitwise xor
a & b bitwise and
a == b, a = b, a != b
equality
a <= b, a >= b, a < b, a > b
inequality
a << b, a >> b
bit shift
a + b, a - b
addition and subtraction
a * b, a / b, a % b
multiplication, division and modulo
~a, +a, -a
bitwise not, no effect and negation
?label 1 if label exists, 0 if it does not. This does not generate an error if label does
not exist. Note that this is usually evaluated immediately (if the rest of the
expression permits), and it does not check if the label is defined later. This
means it can be used as the argument of if , to get the functionality of #ifdef in
C.
(a) parenthesis
Literals in expressions may be written as: (case does not matter)
@c11 arbitrary base number (specified by 'c' so c+1 == 10: here base is 13)
14, 14d, @914
decimal number
016, 16o, 16q, &o16, @716
octal number
0Eh, 0xE, &hE, $E, @FE
hexadecimal number (for the first notations, the first character must be 0-9)
%1110, 1110b, &b1110, @11110
binary number
's' ASCII code of 's'
'\n', '\r', '\a', '\t'
Newline, carriage return, alert, tab
'\nnn' Octal ASCII code
$ address of first byte of current command
LABELS
In all expressions, labels may be used. However, there are some expressions where the
value must be computable at once, and therefore only previously defined labels may be
used. This is the case for:
- The argument of org
- The argument of seek
- The argument of equ (eg, a label definition)
- The first argument of ds
- The argument of if
In all other expressions, labels which are defined later may be used.
Labels must consist of letters, digits, underscores and periods, and must not start with a
digit. Labels are case sensitive.
Labels starting with a period (.) are local , which means their scope is only the current
include file or macro definition (and files included/macros called from it). This is
particularly useful for macros, to prevent duplicate definitions when using a macro more
than once.
EXIT STATUS
If assembly was successful, no output is produced (except the result, and messages
triggered by --verbose) and 0 is returned. At any error, there is output on the standard
error and 1 is returned.
NOTES
Parts that are not assembled because of an if statement and macros which are defined but
never used are only checked to have a correct command. The argument is not parsed. This
means that if the file passes through the assembler with no warnings or errors, it may
still not assemble correctly in a different setting (where the if's give different
results).
BUGS
If you find a bug, or want to send comments, please use the web interface at
http://savannah.nongnu.org/projects/z80asm/ or send an e-mail to wijnen@debian.org.
AUTHOR
Z80asm was written by Bas Wijnen <wijnen@debian.org>. Some patches were provided by Jan
Wilmans <jw@dds.nl>
May 10, 2005 Z80ASM(1)