Provided by: libexcel-valuereader-xlsx-perl_1.15-1_all 
NAME
Excel::ValueReader::XLSX - extracting values from Excel workbooks in XLSX format, fast
SYNOPSIS
my $reader = Excel::ValueReader::XLSX->new(xlsx => $filename_or_handle);
# .. or with syntactic sugar :
my $reader = Excel::ValueReader::XLSX->new($filename_or_handle);
# .. or with LibXML backend :
my $reader = Excel::ValueReader::XLSX->new(xlsx => $filename_or_handle,
using => 'LibXML');
foreach my $sheet_name ($reader->sheet_names) {
my $grid = $reader->values($sheet_name);
my $n_rows = @$grid;
print "sheet $sheet_name has $n_rows rows; ",
"first cell contains : ", $grid->[0][0];
}
foreach my $table_name ($reader->table_names) {
my ($columns, $rows) = $reader->table($table_name);
my $n_data_rows = @$rows;
my $n_columns = @$columns;
print "table $table_name has $n_data_rows rows and $n_columns columns; ",
"column 'foo' in first row contains : ", $rows->[0]{foo};
}
my $first_grid = $reader->values(1); # if using numerical indices, start at 1
DESCRIPTION
Purpose
This module reads the contents of an Excel file in XLSX format. Unlike other modules like
Spreadsheet::ParseXLSX or Spreadsheet::XLSX, there is no support for reading formulas, formats or other
Excel internal information; all you get are plain values -- but you get them much faster ! Besides, this
module also has support for parsing Excel tables.
Backends
Two different backends may be used for extracting values :
Regex
this backend uses regular expressions to parse the XML content.
LibXML
this backend uses XML::LibXML::Reader to parse the XML content. It is probably safer but about three
times slower than the Regex backend (but still much faster than Spreadsheet::ParseXLSX).
The default is the "Regex" backend.
Sheet numbering
Although worksheets are usually accessed by name, they may also be accessed by numerical indices,
starting at value 1. Some other Perl parsing modules use a different convention, where the first sheet
has index 0. Here index 1 was chosen to be consistent with the common API for "collections" in Microsoft
Office object model.
METHODS
new
my $reader = Excel::ValueReader::XLSX->new(xlsx => $filename_or_handle,
using => $backend,
%date_formatting_options);
The "xlsx" argument is mandatory and points to the ".xlsx" file to be parsed, or is an open filehandle.
The "using" argument is optional; it specifies the backend to be used for parsing; default is 'Regex'.
As syntactic sugar, a shorter form is admitted :
my $reader = Excel::ValueReader::XLSX->new($filename_or_handle);
Optional parameters for formatting date and time values are described in the "DATE AND TIME FORMATS"
section below.
sheet_names
my @sheets = $reader->sheet_names;
Returns the list of worksheet names, in the same order as in the Excel file.
active_sheet
my $active_sheet_number = $reader->active_sheet;
Returns the numerical index (starting at 1) of the sheet that was active when the file was last saved.
May return "undef".
values
my $grid = $reader->values($sheet);
Returns a bidimensional array of scalars, corresponding to cell values in the specified worksheet. The
$sheet argument can be either a sheet name or a sheet position (starting at 1).
Unlike the original Excel cells, positions in the grid are zero-based, so for example the content of cell
B3 is in "$grid->[1][2]". The grid is sparse : the size of each row depends on the position of the last
non-empty cell in that row. Thanks to Perl's auto-vivification mechanism, any attempt to access a non-
existent cell will automatically create the corresponding cell within the grid. The number of rows and
columns in the grid can be computed like this :
my $nb_rows = @$grid;
my $nb_cols = max map {scalar @$_} @$grid; # must import List::Util::max
table_names
my @table_names = $reader->table_names;
Returns the list of names of tables registered in this workbook.
table
my $rows = $reader->table(name => $table_name); # or just : $reader->table($table_name)
# or
my ($columns, $rows) = $reader->table(name => $table_name);
# or
my ($columns, $rows) = $reader->table(sheet => $sheet [, ref => $range]
[, columns => \@columns]
[, no_headers => 1]
);
In its simplest form, this method returns the content of an Excel table referenced by its table name (in
Excel, the table name appears and can be modified through the ribbon tab entry "Table tools / Design").
The table name is passed either through the named argument "name", or positionally as unique argument to
the method.
Rows are returned as hashrefs, where keys of the hashes correspond to column names in the table. In
scalar context, the method just returns an arrayref to the list of rows. In list context, the method
returns a pair, where the first element is an arrayref of column names, and the second element is an
arrayref to the list of rows.
Instead of specifying a table name, it is also possible to give a sheet name or sheet number. By
default, this considers the whole sheet content as a single table, where column names are on the first
row. However, additional arguments can be supplied to change the default behaviour :
ref a specific range of cells within the sheet that contain the table rows and columns. The range must
be expressed using traditional Excel notation, like for example "C9:E23" (columns 3 to 5, rows 9 to
23).
columns
an arrayref containing the list of column names. If absent, column names will be taken from the
first row in the table.
no_headers
if true, the first row in the table will be treated as a regular data row, instead of being treated
as a list of column names. In that case, since column names cannot be inferred from cell values in
the first row, the "columns" argument to the method must be present.
AUXILIARY METHODS
A1_to_num
my $col_num = $reader->A1_to_num('A'); # 1
$col_num = $reader->A1_to_num('AZ'); # 52
$col_num = $reader->A1_to_num('AA'); # 26
$col_num = $reader->A1_to_num('ABC'); # 731
Converts a column expressed as a sequence of capital letters (in Excel's "A1" notation) into the
corresponding numeric value.
formatted_date
my $date = $reader->formatted_date($numeric_date, $excel_date_format);
Given a numeric date, this method returns a string date formatted according to the date formatter routine
explained in the next section. The $excel_date_format argument should be the Excel format string for that
specific cell; it is used only for for deciding if the numeric value should be presented as a date, as a
time, or both. Optionally, a custom date formatter callback could be passed as third argument.
DATE AND TIME FORMATS
Date and time handling
In Excel, date and times values are stored as numeric values, where the integer part represents the date,
and the fractional part represents the time. What distinguishes such numbers from ordinary numbers is the
numeric format applied to the cells where they appear.
Numeric formats in Excel are complex to reproduce, in particular because they are locale-dependent;
therefore the present module does not attempt to faithfully interpret Excel formats. It just infers from
formats which cells should be presented as date and/or time values. All such values are then presented
through the same date_formatter routine. The default formatter is based on "strftime" in POSIX; other
behaviours may be specified through the "date_formatter" parameter (explained below).
Parameters for the default strftime formatter
When using the default strftime formatter, the following parameters may be passed to the constructor :
date_format
The "strftime" in POSIX format for representing dates. The default is "%d.%m.%Y".
time_format
The "strftime" in POSIX format for representing times. The default is "%H:%M:%S".
datetime_format
The "strftime" in POSIX format for representing date and time together. The default is the
concatenation of "date_format" and "time_format", with a space in between.
Writing a custom formatter
A custom algorithm for date formatting can be specified as a parameter to the constructor
my $reader = Excel::ValueReader::XLSX->new(xlsx => $filename,
date_formatter => sub {...});
If this parameter is "undef", date formatting is canceled and therefore date and time values will be
presented as plain numbers.
If not "undef", the date formatting routine will we called as :
$date_formater->($excel_date_format, $year, $month, $day, $hour, $minute, $second, $millisecond);
where
• $excel_date_format is the Excel numbering format associated to that cell, like for example "mm-dd-yy"
or "h:mm:ss AM/PM". See the Excel documentation for the syntax description. This is useful to decide
if the value should be presented as a date, a time, or both. The present module uses a simple
heuristic : if the format contains "d" or "y", it should be presented as a date; if the format
contains "h" or "s", it should be presented as a time. The letter "m" is not taken into consideration
because it is ambiguous : depending on the position in the format string, it may represent either a
"month" or a "minute".
• "year" is the full year, such as 1993 or 2021. The date system of the Excel file (either 1900 or
1904, see
<https://support.microsoft.com/en-us/office/date-systems-in-excel-e7fe7167-48a9-4b96-bb53-5612a800b487>)
is properly taken into account. Excel has no support for dates prior to 1900 or 1904, so the "year"
component will always be above this value.
• "month" is the numeric value of the month, starting at 1
• "day" is the numeric value of the day in month, starting at 1
• $hour, $minute, $second, $millisecond obviously contain the corresponding numeric values.
CAVEATS
• This module was optimized for speed, not for completeness of OOXML-SpreadsheetML support; so there
may be some edge cases where the output is incorrect with respect to the original Excel data.
• Embedded newline characters in strings are stored in Excel as "\r\n", following the old Windows
convention. When retrieved through the "Regex" backend, the result contains the original "\r" and
"\n" characters; but when retrieved through the LibXML, "\r" are silently removed by the
"XML::LibXML" package.
SEE ALSO
The official reference for OOXML-SpreadsheetML format is in
<https://www.ecma-international.org/publications/standards/Ecma-376.htm>.
Introductory material on XLSX file structure can be found at
<http://officeopenxml.com/anatomyofOOXML-xlsx.php>.
The CPAN module Data::XLSX::Parser is claimed to be in alpha stage; it seems to be working but the
documentation is insufficient -- I had to inspect the test suite to understand how to use it.
Another unpublished but working module for parsing Excel files in Perl can be found at
<https://github.com/jmcnamara/excel-reader-xlsx>. Some test cases were borrowed from that distribution.
Conversions from and to Excel internal date format can also be performed through the
DateTime::Format::Excel module.
BENCHMARKS
Below are some benchmarks computed with the program "benchmark.pl" in this distribution. The task was to
parse an Excel file of five worksheets with about 62600 rows in total, and report the number of rows per
sheet. Reported figures are in seconds.
Excel::ValueReader::XLSX::Regex 11 elapsed, 10 cpu, 0 system
Excel::ValueReader::XLSX::LibXML 35 elapsed, 34 cpu, 0 system
[unpublished] Excel::Reader::XLSX 39 elapsed, 37 cpu, 0 system
Spreadsheet::ParseXLSX 244 elapsed, 240 cpu, 1 system
Data::XLSX::Parser 37 elapsed, 35 cpu, 0 system
These figures show that the regex version is about 3 times faster than the LibXML version, and about 22
times faster than Spreadsheet::ParseXLSX. Tests with a bigger file of about 90000 rows showed similar
ratios.
Modules "Excel::Reader::XLSX" (unpublished) and Data::XLSX::Parser are based on XML::LibXML like
Excel::ValueReader::XLSX::Backend::LibXML; execution times for those three modules are very close.
ACKNOWLEDGMENTS
• David Flink signaled (and fixed) a bug about strings with embedded newline characters, and signaled
that the 'r' attribute in cells is optional.
• Ulibuck signaled bugs several minor bugs on the LibXML backend.
• H.Merijn Brand suggested additions to the API and several improvements to the code source.
• Ephraim Stevens signaled a bug in the table() method with 'ref' param.
AUTHOR
Laurent Dami, <dami at cpan.org>
COPYRIGHT AND LICENSE
Copyright 2020-2023 by Laurent Dami.
This library is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.
perl v5.40.0 2025-02-01 Excel::ValueReader::XLSX(3pm)