Provided by: nfstest_3.2-3_all 
NAME
nfstest.host - Host module
DESCRIPTION
Provides a set of tools for running commands on the local host or a remote host, including
a mechanism for running commands in the background. It provides methods for mounting and
unmounting from an NFS server and a mechanism to simulate a network partition via the use
of 'iptables'. Currently, there is no mechanism to restore the iptables rules to their
original state.
CLASSES
class Host(baseobj.BaseObj)
Host object
Host() -> New Host object
Usage:
from nfstest.host import Host
# Create host object for local host
x = Host()
# Create host object for remote host
y = Host(host='192.168.0.11')
# Run command to the local host
x.run_cmd("ls -l")
# Send command to the remote host and run it as root
y.run_cmd("ls -l", sudo=True)
# Run command in the background
x.run_cmd("tcpdump", sudo=True, wait=False)
....
....
# Stop command running in the background
x.stop_cmd()
# Mount volume using default options
x.mount()
# Unmount volume
x.umount()
# Start packet trace
x.trace_start()
# Stop packet trace
x.trace_stop()
# Open packet trace
x.trace_open()
# Enable NFS kernel debug
x.nfs_debug_enable(nfsdebug='all'):
# Stop NFS kernel debug
x.nfs_debug_reset()
Methods defined here:
---------------------
__del__(self)
Destructor
__init__(self, **kwargs)
Constructor
Initialize object's private data.
host: Hostname or IP address [default: localhost]
user: User to log in to host [default: '']
server:
NFS server name or IP address [default: None]
nfsversion:
NFS version [default: 4.1]
proto: NFS protocol name [default: 'tcp']
port: NFS server port [default: 2049]
sec: Security flavor [default: 'sys']
nconnect:
Multiple TCP connections option [default: 1]
export:
Exported file system to mount [default: '/']
mtpoint:
Mount point [default: '/mnt/t']
datadir:
Data directory where files are created [default: '']
mtopts:
Mount options [default: 'hard,rsize=4096,wsize=4096']
interface:
Network device interface [default: 'eth0']
nomount:
Debug option so the server is not actually mounted [default: False]
tracename:
Base name for trace files to create [default: 'tracefile']
trcdelay:
Seconds to delay before stopping packet trace [default: 0.0]
tcpdump:
Tcpdump command [default: '/usr/sbin/tcpdump']
tbsize:
Capture buffer size in kB [default: 150000]
notrace:
Debug option so a trace is not actually started [default: False]
rpcdebug:
Set RPC kernel debug flags and save log messages [default: '']
nfsdebug:
Set NFS kernel debug flags and save log messages [default: '']
tracepoints:
List of trace points modules to enable [default: '']
nfsstats:
Get NFS stats [default: False]
dbgname:
Base name for log messages files to create [default: 'dbgfile']
trcpname:
Base name for trace point files to create [default: 'trcpfile']
nfsstatname:
Base name for NFS stats files to create [default: 'nfsstatfile']
messages:
Location of file for system messages [default: '/var/log/messages']
trcevents:
Tracing events directory [default: '/sys/kernel/debug/tracing/events']
trcpipe:
Trace pipe file [default: '/sys/kernel/debug/tracing/trace_pipe']
tmpdir:
Temporary directory where trace/debug files are created
[default: '/tmp']
iptables:
Iptables command [default: '/usr/sbin/iptables']
kill: kill command [default: '/usr/bin/kill']
nfsstat:
nfsstat command [default: '/usr/bin/nfsstat']
sudo: Sudo command [default: '/usr/bin/sudo']
abspath(self, filename, dir=None)
Return the absolute path for the given file name.
cleanup(self)
Gracefully unmount volume and reset network
get_pids(self, pid)
Get all descendant PIDs for the given PID
get_route(self, ipaddr)
Get routing information for destination IP address
Returns a tuple: (gateway, device name, src IP address)
mount(self, **kwargs)
Mount the file system on the given mount point.
server:
NFS server name or IP address [default: self.server]
nfsversion:
NFS version [default: self.nfsversion]
proto: NFS protocol name [default: self.proto]
port: NFS server port [default: self.port]
sec: Security flavor [default: self.sec]
nconnect:
Multiple TCP connections option [default: self.nconnect]
export:
Exported file system to mount [default: self.export]
mtpoint:
Mount point [default: self.mtpoint]
datadir:
Data directory where files are created [default: self.datadir]
mtopts:
Mount options [default: self.mtopts]
Return the mount point.
network_drop(self, ipaddr, port)
Simulate a network drop by dropping all tcp packets going to the
given ipaddr and port using the iptables commands.
network_reset(self)
Reset the network by flushing all the chains in the table using
the iptables command.
nfs_debug_enable(self, **kwargs)
Enable NFS debug messages.
rpcdebug:
Set RPC kernel debug flags and save log messages [default: self.rpcdebug]
nfsdebug:
Set NFS kernel debug flags and save log messages [default: self.nfsdebug]
dbgfile:
Name of log messages file to create, default is a unique name
created in the temporary directory using self.dbgname as the
base name.
nfs_debug_reset(self)
Reset NFS debug messages.
nfsstat_get(self)
Get NFS stats.
nfsstat_init(self)
Initialize NFS stats.
nfsstr(self, version=None, prefix='NFSv')
Return the NFS string for the given NFS version
version:
NFS version, default is the object attribute nfsversion
nfsvers(self, version=None)
Return major and minor version for the given NFS version
version:
NFS version, default is the object attribute nfsversion
run_cmd(self, cmd, sudo=False, dlevel='DBG1', msg='', wait=True)
Run the command to the remote machine using ssh.
There is no user authentication, so remote host must allow
ssh connection without any passwords for the user.
For a localhost the command is just executed and ssh is not used.
The object for the process of the command is stored in object
attribute 'self.process' to be used by methods wait_cmd() and
stop_cmd(). The standard output of the command is also stored
in the object attribute 'self.pstdout' while the standard error
output of the command is stored in 'self.pstderr'.
cmd: Command to execute
sudo: Run command using sudo if option is True
dlevel:
Debug level for displaying the command to the user
msg: Prefix this message to the debug message to be displayed
wait: Wait for command to complete before returning
Return the standard output of the command and the return code or
exit status is stored in the object attribute 'self.returncode'.
stop_cmd(self, process=None, dlevel=None, msg='')
Terminate command started by run_cmd() by calling wait_cmd()
with the 'terminate' option set to True.
process:
The object for the process of the command to terminate,
or terminate all commands started by run_cmd() if this
option is not given
dlevel:
Debug level for displaying the command to the user, default
is the level given by run_cmd()
msg: Prefix this message to the debug message to be displayed
Return the exit status of the last command
sudo_cmd(self, cmd)
Prefix the SUDO command if effective user is not root.
trace_open(self, tracefile=None, **kwargs)
Open the trace file given or the trace file started by trace_start().
All extra options are passed directly to the packet trace object.
Return the packet trace object created, the packet trace object
is also stored in the object attribute pktt.
trace_points_enable(self)
Enable trace points.
trace_points_reset(self)
Reset trace points.
trace_start(self, tracefile=None, interface=None, capsize=None, clients=None)
Start trace on interface given
tracefile:
Name of trace file to create, default is a unique name
created in the temporary directory using self.tracename as the
base name.
capsize:
Use the -C option of tcpdump to split the trace files every
1000000*capsize bytes. See documentation for tcpdump for more
information
clients:
List of Host() objects to monitor
Return the name of the trace file created.
trace_stop(self)
Stop the trace started by trace_start().
umount(self)
Unmount the file system.
wait_cmd(self, process=None, terminate=False, dlevel=None, msg='')
Wait for command started by run_cmd() to finish.
process:
The object for the process of the command to wait for,
or wait for all commands started by run_cmd() if this
option is not given
terminate:
If True, send a signal to terminate the command or commands
and then wait for all commands to finish
dlevel:
Debug level for displaying the command to the user, default
is the level given by run_cmd()
msg: Prefix this message to the debug message to be displayed
Return the exit status of the last command
Static methods defined here:
----------------------------
get_ip_address(host='', ipv6=False)
Get IP address associated with the given host name.
This could be run as an instance or class method.
SEE ALSO
baseobj(3), packet.pktt(3)
BUGS
No known bugs.
AUTHOR
Jorge Mora (mora@netapp.com)