NAME

       ModuleDtmfRepeater.conf - Configuration file for the SvxLink server DTMF Repeater module

DESCRIPTION

       svxlink  is  a  general  purpose  voice  service  system  for ham radio use. This man-page
       describe the SvxLink server configuration for the DTMF Repeater module.

       The DTMF Repeater module retransmits all received DTMF digits. This can be used to control
       remote  systems  that is also DTMF controlled. The DTMF muting feature should be used on a
       repeater to not retransmit the received DTMF audio.

CONFIGURATION VARIABLES

       There are a couple of configuration  variables  that  are  common  to  all  modules.   The
       documentation for these can be found in the svxlink.conf(5) manual page.

       The  amplitude, tone length and tone spacing of the generated DTMF digits is configured in
       the configuration section for the LocalTx that is actually transmitting the DTMF.  Have  a
       look  at  the  documentation  for  the  DTMF_TONE_*  configuration  variables  for  a full
       explanation.

       Here is the description of all module specific configuration variables  that  the  SvxLink
       DtmfRepeater module understands.

   ModuleDtmfRepeater
       REPEAT_DELAY
              Specify  a  time,  in  milliseconds,  that the DTMF Repeater module will wait after
              digit reception and squelch close before retransmitting received DTMF  digits.   If
              zero  or  not  specified,  SvxLink  will try to send the digits as soon as they are
              received.

              This variable does not apply when DTMF  digits  are  sent  in  non-activated  mode.
              Digits will then be retransmitted as soon as possible.

FILES

       /etc/svxlink/svxlink.conf (or deprecated /etc/svxlink.conf)
              The system wide configuration file.

       ~/.svxlink/svxlink.conf
              Per user configuration file.

       /etc/svxlink/svxlink.d/ModuleDtmfRepeater.conf
              Global  modularized  configuration  file.  Depends  on  the  CFG_DIR  configuration
              variable setting.

       ~/.svxlink/svxlink.d/ModuleDtmfRepeater.conf
              Per user modularized configuration  file.  Depends  on  the  CFG_DIR  configuration
              variable setting.

AUTHOR

       Tobias Blomberg (SM0SVX) <sm0svx at svxlink dot org>

REPORTING BUGS

       Bugs should be reported using the issue tracker at https://github.com/sm0svx/svxlink.

       Questions about SvxLink should not be asked using the issue tracker. Instead use the group
       set up for this purpose at groups.io: https://groups.io/g/svxlink

SEE ALSO

       svxlink.conf(5)