Provided by: bip_0.9.3-1.1_amd64 
NAME
bip.conf - Configuration file for BIP IRC Proxy
SYNOPSIS
~/.bip/bip.conf
DESCRIPTION
A BIP configuration file consists of a list of variable affectations or sections. It
contains the global options, networks definitions, users configuration, users connections
declarations. Each section is described in this manpage.
The bip.conf skeleton should be something like this :
option1 = value;
option2 = value;
...
network {
net_opt = value;
...
server { ... };
server { ... };
};
...
user {
user_opt = value;
...
connection {
conn_opt = value;
...
channel { ... };
};
connection {
conn_opt = value;
...
channel { ... };
channel { ... };
...
};
};
SYNTAX RULES
The syntax is quite simple :
• everything after the # character is ignored (comments)
• each variable affectation must be finished with a ;
• each section { } must be finished with a ;
If you use vim you will probably want to use vim with the provided bip.vim syntax file to
avoid common syntax and lexical mistakes. You can also find an example configuration file
along with BIP.
By default, bipdir is the $HOME/.bip directory and the parent directory for client
certificate, configuration, logs, pid, oidentd. If environment variable $HOME doesn't
exist, -s parameter must be used.
GLOBAL OPTIONS
client_side_ssl (default: false)
When true, clients will need to connect to BIP using SSL. You'll also need to
generate a SSL cert/key pair in bipdir/bip.pem (usually ~/.bip/bip.pem or
/var/lib/bip/bip.pem) or client_side_ssl_pem if defined.
client_side_ssl_pem (default: <bipdir>/bip.pem)
Set this to the full path of the cert/key pair bip should use to accept clients SSL
connections.
client_side_ciphers
OpenSSL cipher lists used for clients SSL connections. If not set, OpenSSL default
ciphers will be used.
client_side_dh_param DH parameters filename (default: <bipdir>/dh.pem)
Used for clients SSL connections, Supply at least 2048-bit parameters.
ssl_default_ciphers
OpenSSL cipher lists used for server connections. If not set, OpenSSL default
ciphers will be used.
ip (default: 0.0.0.0)
Listening IP address. This is the IP address bip will listen for incoming client
connections.
log (default: true)
When true, the log system is enabled. Else, BIP will not write a single log file.
Backlog is then stored into memory.
log_system (default: true)
When true, system messages such as connection errors are logged. Else, BIP will not
write system logs.
log_format (default: %u/%n/%Y-%m/%c.%d.log)
Determines the log filename depending on :
- %u username (name in user { }; section)
- %n network name (name in connection { }; section)
- %c channel name
- %Y 4 digits year
- %m 2 digits month
- %d 2 digits day
log_level (default: 1)
Specify the verbosity of BIP from 0 (fatal errors) to 6 (huge debug output)
log_root (default: <bipdir>/logs
Main log directory. Sub-directories and files will be created from there depending
on log_format.
log_sync_interval (default: 5)
Defines the delay between each logfiles sync to the disk. Must be a non null
positive integer.
reconn_timer (default: 120)
Defines the initial delay (in seconds) before a reconnection attempt. The delay
increases with the number of attempts: delay = reconn_timer * number of attempts
pid_file (default: <bipdir>/bip.pid)
Defines the file where BIP's pid will be stored. BIP checks if this file exists and
if the pid is still alive upon startup. If true, BIP refuses to start.
write_oidentd (default: false)
Must be set to true to overwrite oidentd configs.
oidentd_file (default: <bipdir>/.oidentd.conf)
oidentd configuration file (if oidentd enabled).
port (default: 7778)
The port on which BIP should listen for clients.
NETWORK SECTION
This section allows you to declare a network for use in the connection sections. It may
appear more than once in the configuration file.
ssl (default: false)
If true, BIP will connect to this network using SSL only. You cannot mix SSL
servers and non-SSL servers in the same network section. This is by choice, we
believe it's a bad idea.
ssl_ciphers (override global ssl_default_ciphers)
OpenSSL cipher lists used for this network.
name It's the network name used in the connection section. Please note that this value
is not used in log_format, since it uses the variable name from the connection
section.
SERVER SUB-SECTION
BIP will cycle through the server sections list when reconnecting to a network. It may
appear more than once in a network section.
host The server's hostname or IP address.
port (default: 6667)
The server port to connect to.
USER SECTION
This section allows you to define the users allowed to connect to BIP and their options.
It may appear more than once in the configuration file.
admin (default: false)
If a user has admin set to true, he'll become a bip administrator, which allows him
for example to reload bip from IRC or to see the user configuration.
backlog (default: true)
Enable or disable the whole backlog system, which allows clients to see a log
replay upon connection.
backlog_always (default: false)
If true, clients will always receive backlog_lines log lines, even if they were
already sent before. That means : If backlog_always is false, backlog will be reset
whenever there is no more client connected to a network. Else backlog will not be
reset. This option should of course not be enabled if backlog_lines is 0 ! If you
still want to do so, don't forget to /BIP BLRESET sometimes.
backlog_lines (default: 10)
If set to 0, BIP will replay all the logs since last client disconnect. Else, it'll
replay exactly backlog_lines lines on each channel and privates. Be aware that BIP
will replay backlog_lines lines of all privates, even if there are more. For
example if Coyote told you 12 lines and then RoadRunner 6, you'll only have a
replay of the 6 RoadRunner's lines and the last 4 of Coyote's.
backlog_timestamp (default: time)
none disables timestamps in backlogged lines, time or datetime allow one to select
the timestamp format in backlogged lines.
backlog_no_timestamp (default: false)
This parameter is deprecated, use backlog_timestamp instead. false implies
backlog_timestamp = none and true implies backlog_timestamp = time .
backlog_reset_on_talk (default: false)
When true, backlog will be reset upon client talk (channel/private message or
action). It means that next time you log to your bip session, the backlogging will
start at the time right after your last words on that specific channel or query.
backlog_reset_connection (default: false)
When true, backlog_reset_on_talk option above is changed in that the whole network
backlog is reset when you talk in the network.
backlog_msg_only (default: false)
When true, bip will backlog only channel/private messages/notices. No topic change,
nick change, user quit/part/join will be backlogged upon connection.
bip_use_notice (default: false)
If bip_use_notice is true, bip's notifications to the clients will be send as
notices instead of private messages. For example, this setting applies to
disconnection notifications or /BIP command replies.
default_nick
The default nick option for each connection section where no nick is defined. See
CONNECTION SECTION for more details.
default_realname
The default realname option for each connection section where no realname is
defined. See CONNECTION SECTION for more details.
default_user
The default user option for each connection section where no user is defined. See
CONNECTION SECTION for more details.
name The username. It'll be used to authenticate to bip and in log_format.
password
The password. It MUST be generated with bipmkpw or it'll not work.
ssl_check_mode (default: none)
Tells whether BIP should check the server SSL certificate and against what. Can be
none for no check at all, ca to check if the cert is signed by a Certificate
Authority in repository, or basic to check if cert exists in repository. The
repository is defined by ssl_check_store. This allows a "ssh-like" private key
generation scheme. Note that in basic mode:
- expired certificates that are in the store are considered valid.
- CA-signed certificates are considered valid even if not in store.
ssl_check_store (default: not set)
This repository is browsed by BIP when a SSL certificate or CA check is needed. In
ssl_check_mode basic it must be a file, to which certificates you choose to trust
will be appended. In ssl_check_mode ca it may be a single file containing one or
more trusted certificates concatenated together between BEGIN CERTIFICATE and END
CERTIFICATE lines, a directory containing individual certificates in PEM format
which has been processed by c_rehash, or unset, in which case bip will attempt to
use the default certificate store of the OpenSSL it is built against.
ssl_client_certfile (default: not set)
Some networks (OFTC at least) allow you to authenticate to nickserv services using
a client side certificate. Make this variable point to the .pem file to use this
feature.
CONNECTION SUB-SECTION
Each connection section associates a user to the networks he wants to connect to. Thus, it
must be declared in the User sections, and can be used more than once.
away_nick (default: not set)
If set, and if there are no more client attached, BIP will change nickname to this
away_nick. Your nickname will be restored upon client connect.
no_client_away_msg (default: not set)
This options allows you to set an away message. This away message will be set when
the last client disconnects, and removed when a client connects.
follow_nick (default: false)
If set to true, when you change nick, BIP stores the new nickname as the new
default nickname value. Thus, if you are disconnected from the server, BIP will
restore the correct nickname.
autojoin_on_kick (default: true)
If set to false bip will not attempt to re-join a channel from which you were
kicked.
ignore_first_nick (default: false)
If set to true, BIP will ignore the nickname sent by the client upon connect.
Further nickname changes will be processed as usual.
ignore_server_capab (default: true)
By default bip ignores when a server advertises the CAPAB feature. Servers that
support this can prefix each line with a "+" or a "-" depending if a user is
registered or not. xchat checks if a server has the CAPAB feature and enables it.
If you have two clients connected to a bip connection, one that supports this mode
and one that does not, you see the plus and the minuses on each line in the client
that does not support CAPAB. To avoid that, when a server advertises CAPAB bip
simply removes it. You can set this option to false to keep using CAPAB (if you
only use clients that support it for instance).
network
The network name. See the NETWORK SECTION.
log (override global log)
When true, the file logs are enabled for this connection. When false, no log file
is written, logs are kept in memory.
nick BIP will send that string as your nickname upon connect. If not specified and if
default_nickname is specified in the user section, BIP will use that default
nickname string.
on_connect_send
You can specify this field more than once. BIP will send the text as is to the
server. It'd be useful for a greet on connect or to send your NickServ password.
password
This is the IRC server password, which is sent upon connection to the IRC server
only.
realname
BIP will send that string as the realname part (description in whois result) upon
connect. If not specified and if default_realname is specified in the user section,
BIP will use that default realname string.
sasl_mechanism
Tells BIP to use specified SASL mechanism. Currently supported: PLAIN, EXTERNAL.
PLAIN mechanism requires sasl_username and sasl_password and is the default if
these are set.
sasl_username
This connection's username to pass on using SASL authentication.
sasl_password
This connection's password to pass on using SASL authentication.
source_port
If specified, tells BIP to connect from this port to the IRC server.
ssl_check_mode (default: the user's option)
See ssl_check_mode option in User section.
user BIP will send that string as the user part (usually between ! and @ in a whois
result) upon connect. It's also used by the oidentd support (if enabled). If not
specified and if default_user is specified in the user section, BIP will use that
default user string.
vhost If specified, BIP will use vhost as the IP address to bind to when connecting to
the IRC server. It'll allow you to use a specific IP address for this network when
you have more than one. This options is totally useless to people who only have one
IP address.
CHANNEL SUB-SUB-SECTION
This section defines the list of channels to join for a user on a particular network. It
is to be found in the connection sections and appear more than once in a connection
section.
name The channel name (#bip, &bip, ...).
key The channel key if needed.
backlog (default: true)
Enable or disable backlogging of this particular channel. Setting this to true
will NOT enable the backlog system, see the user section.
IRC CLIENT CONFIGURATION
On your IRC client, setup as many IRC servers as connections defined in your connection
section.
Host and port must match values defined in ip and port global option. The password must be
username:password:connectionname where:
• username is the name defined in the user section;
• password is the clear text value of the password corresponding to the hashed
password defined in the user section;
• connectionname is the name defined in connection sub-section.
SEE ALSO
bip(1), bipmkpw(1)
AUTHOR
bip authors:
Arnaud 'nohar' Cornet
Loïc 'Kyoshiro' Gomez
Thanks to jj, YS and lafouine, for hanging around while we were coding.
Crypto shamelessly taken from Christophe 'sexy' Devine.
This man page is written by Loïc 'Kyoshiro' Gomez.
2 January 2022 BIP.CONF(5)