Provided by: fapolicyd_1.3.2+20231212+git973a86d1b4-1.1_amd64 
NAME
fapolicyd.conf - fapolicyd configuration file
DESCRIPTION
The file /etc/fapolicyd/fapolicyd.conf contains configuration information for the
application whitelisting daemon configuration. This file allows the admin to tune the
performance and actions of the fapolicyd during runtime. This file contains one
configuration keyword per line, an equal sign, and then followed by appropriate
configuration information. All option names and values are case insensitive. The keywords
recognized are listed and described below. Each line should be limited to 160 characters
or the line will be skipped. You may add comments to the file by starting the line with a
'#' character.
permissive
This option is either a 0 to mean send policy decisions to the kernel for
enforcement. Or it can be a 1 to mean always allow the access even if policy would
block it. This should only be used for policy testing and debug. The default value
is 0.
nice_val
This option gives fapolicyd a scheduler boost. The number can be from 0 to 20. The
default value is 10.
q_size This option is used to control how big of an internal queue that fapolicyd will
use. If requests come in faster than fapolicyd can answer, the queue holds the
pending requests. If the do_stat_report is enabled, when fapolicyd shutsdown it
will provide some statistics which includes maximum queue depth used. This
information can be used to help tune performance. The default value is 800. Also
note, this value means that fapolicyd gets a file descriptor for that entry. There
is an rlimit cap controlled by systemd's LimitNOFILE setting for the service. You
may also need to adjust it if the q_size exceeds it's value.
uid This can be a number or an account name which fapolicyd should switch to during
startup. The default value is 0 because it is guaranteed to exist. But it is
recommended to use the fapolicyd account if that exists.
gid This can be a number or an group name which fapolicyd should switch to during
startup. The default value is 0 because it is guaranteed to exist. But it is
recommended to use the fapolicyd group if that exists.
do_stat_report
This option controls whether (1) or not (0) fapolicyd should create a usage
statistics report on shutdown. The report is written to /var/log/fapolicyd-
access.log. This report gives information about number of allowed accesses and
denials. Then for both the subject and object cache, it dumps information about
size, hits, misses, and evictions. The default value is 1 which means create the
report.
detailed_report
This option controls whether (1) or not (0) fapolicyd should add subject and object
information to the usage statistics report. This would be information about the
exact process or file path in the cache from most recently used to last recently
used. This can be useful for forensics if an incident had occurred. But if the file
names are sensitive then you may want to turn this off. The default value is 1
meaning add the details.
db_max_size
This option controls how many megabytes to allow the trust database to grow to. If
you have lots of packages installed, then you want to make it bigger. The default
value is 50 megabytes.
subj_cache_size
This option controls how many entries the subject cache holds. You want the size to
be big enough that you are not getting too many evictions compared to hits. But you
don't want to waste memory. Whenever there is an eviction, fapolicyd has to
regenerate information about the subject and this slows performance. There are only
64k processes allowed at any time, so this would be the upper limit. The default
value is 1549.
obj_cache_size
This option controls how many entries the object cache holds. You want the size to
be big enough that you are not getting too many evictions compared to hits. But you
don't want to waste memory. Whenever there is an eviction, fapolicyd has to
regenerate information about the object and this slows performance. The default
value is 8191.
watch_fs
This is a comma separated list of file systems that should be watched for access
permission. No attempt is made to validate the file systems names. They should
exactly match the name presented in the first column of /proc/mounts. If this is
not configured, it will default to watching ext4, xfs, and tmpfs.
trust This is a comma separated list of trust back-ends. If this is not configured,
'rpmdb,file' is default. Fapolicyd supports file back-end that reads content of
/etc/fapolicyd/fapolicyd.trust and use it as a list of trusted files. The second
option is rpmdb backend that generates list of trusted files from rpmdb.
integrity
This option tells fapolicyd which integrity strategy it should use. It can be one
of 4 values:
none This is the default and does no integrity checking.
size Selecting this option will compare the size of the file with what it
was knows to be. This is better than nothing and very fast since
fapolicyd already collects size information during normal processing.
However, an attacker could replace the file and as long as the size
matches, it will not be detected.
ima Selecting this option will use a SHA256 hash that the IMA subsystem
places in a file's extended attributes in addition to the size check.
This means that all file systems holding executable code must support
extended attributes.
sha256 Selecting this option will calculate a SHA256 hash by cryptographic
means. A size check will also be performed.
syslog_format
This option controls how the output from the access decision is formatted. The
format is a comma separated list of subject and object names from the rules. It
does not allow the keyword "all". It also allows for rule, dec, and perm. The
format must include a semi-colon to delineate subject from object keywords. The
typical use is to place information about the access decision, then subject
information, a colon, and the object information. Also note that the more things
being logged, the more it will impact system performance. Also, the event written
is limited to 512 bytes.
Example:
syslog_format = rule,dec,perm,auid,pid,exe,:,path,ftype,trust
rpm_sha256_only
The option set to 1 forces the daemon to work only with SHA256 hashes. This is
useful on the systems where the integrity is set to SHA256 or IMA and some rpms
were originally built with e.g. SHA1. The daemon will ignore these SHA1 entries
therefore they can be added manually via CLI with correct SHA256 to a trust file
later. If set to 0 the daemon stores SHA1 in trustdb as well. This is compatible
with older behavior which works with the integrity set to NONE and SIZE. The NONE
or SIZE integrity setting considers the files installed via rpm as trusted and it
does not care about their hashes at all. On the other hand the integrity set to
SHA256 or IMA will never consider a file with SHA1 in trustdb as trusted. The
default value is 0.
allow_filesystem_mark
When this option is set to 1, it allows fapolicyd to monitor file access events on
the underlying file system when they are bind mounted or are overlayed (e.g. the
overlayfs). Normally they block fapolicyd from seeing events on the underlying file
systems. This may or may not be desirable. For example, you might start seeing
containers accessing things outside of the container but there is no source of
trust for the container. In that case you probably do not want to see access from
the container. Or maybe you do not use containers but want to control anything run
by systemd-run when dynamic users are allowed. In that case you probably want to
turn it on. Not all kernel's support this option. Therefore the default value is 0.
SEE ALSO
fapolicyd(8), fapolicyd-cli(8) and fapolicy.rules(5).
AUTHOR
Steve Grubb