Provided by: magic_8.3.105+ds.1-1.1_amd64 
NAME
magic - format of .mag files read/written by Magic
DESCRIPTION
Magic uses its own internal ASCII format for storing cells in disk files. Each cell name
is stored in its own file, named name.mag.
The first line in a .mag file is the string
magic
to identify this as a Magic file.
The next line is optional and is used to identify the technology in which a cell was
designed. If present, it should be of the form
tech techname
If absent, the technology defaults to a system-wide standard, currently nmos.
The next line is also optional and gives a timestamp for the cell. The line is of the
format
timestamp stamp
where stamp is a number of seconds since 00:00 GMT January 1, 1970 (i.e, the Unix time
returned by the library function time()). It should be the last time this cell or any of
its children changed. The timestamp is used to detect when a child is edited outside the
context of its parent (the parent stores the last timestamp it saw for each of its
children; see below). When this occurs, the design-rule checker must recheck the entire
area of the child for subcell interaction errors. If this field is omitted in a cell,
Magic supplies a default value that forces the rechecks.
Next come lines describing the contents of the cell. There are three kinds of groups of
lines, describing mask rectangles, subcell uses, and labels. Each group must appear
contiguously in the file, but the order between groups is arbitrary.
Each group of mask rectangles is headed with a line of the format
<< layer >>
where layer is a layername known in the current technology (see the tech line above).
Each line after this header has the format
rect xbot ybot xtop ytop
where (xbot, ybot) is the lower-left corner of the rectangle in Magic (lambda)
coordinates, and (xtop, ytop) is the upper-right corner. Degenerate rectangles are not
allowed; xbot must be strictly less than xtop, and ybot strictly less than ytop. The
smallest legal value of xbot or ybot is −67108858, and the largest legal value for xtop or
ytop is 67108858. Values that approach these limits (within a factor of 100 or 1000) may
cause numerical overflows in Magic even though they are not strictly illegal. We
recommend using coordinates around zero as much as possible.
Rectangles should be non-overlapping, although this is not essential. They should also
already have been merged into maximal horizontal strips (the neighbor to the right or left
of a rectangle should not be of the same type), but this is also not essential.
The second kind of line group describes a single cell use. Each cell use group is of the
following form:
use filename use-id
array xlo xhi xsep ylo yhi ysep
timestamp stamp
transform a b c d e f
box xbot ybot xtop ytop
A group specifies a single instance of the cell named filename, with instance-identifier
use-id. The instance-identifier use-id must be unique among all cells used by this .mag
file. If use-id is not specified, a unique one is generated automatically.
The array line need only be present if the cell is an array. If so, the X indices run
from xlo to xhi inclusive, with elements being separated from each other in the X
dimension by xsep lambda. The Y indices run from ylo to yhi inclusive, with elements
being separated from each other in the Y dimension by ysep lambda. If xlo and xhi are
equal, xsep is ignored; similarly if ylo and yhi are equal, ysep is ignored.
The timestamp line is optional; if present, it gives the last time this cell was aware
that the child filename changed. If there is no timestamp line, a timestamp of 0 is
assumed. When the subcell is read in, this value is compared to the actual value at the
beginning of the child cell. If there is a difference, the ``timestamp mismatch'' message
is printed, and Magic rechecks design-rules around the child.
The transform line gives the geometric transform from coordinates of the child filename
into coordinates of the cell being read. The six integers a, b, c, d, e, and f are part
of the following transformation matrix, which is used to postmultiply all coordinates in
the child filename whenever their coordinates in the parent are required:
a d 0
b e 0
c f 1
Finally, box gives an estimate of the bounding box of cell filename (covering all the
elements of the array if an array line was present), in coordinates of the cell being
read.
The third kind of line group in a .mag file is a list of labels. It begins with the line
<< labels >>
and is followed by zero or more lines of the following form:
rlabel layer xbot ybot xtop ytop position text
Here layer is the name of one of the layers specified in the technology file for this
cell. The label is attached to material of this type. Layer may be space, in which case
the label is not considered to be attached to any layer.
Labels are rectangular. The lower-left corner of the label (the part attached to any
geometry if layer is non-space) is at (xbot, ybot), and the upper-right corner at
(xtop, ytop). The width of the rectangle or its height may be zero. In fact, most labels
in Magic have a lower-left equal to their upper right.
The text of the label, text, may be any sequence of characters not including a newline.
This text is located at one of nine possible orientations relative to the center of the
label's rectangle. Position is an integer between 0 and 8, each of which corresponds to a
different orientation:
0 center
1 north
2 northeast
3 east
4 southeast
5 south
6 southwest
7 west
8 northwest
A .mag file is terminated by the line
<< end >>
Everything following this line is ignored.
Any line beginning with a pound sigh (``#'') is considered to be a comment and ignored.
Beware, however, that these comments are discarded by Magic when it reads a cell, so if
that cell is written again by Magic, the comments will be lost.
NOTE FOR PROGRAMS THAT GENERATE MAGIC FILES
Magic's incremental design rule checker expects that every cell is either completely
checked, or contains information to tell the checker which areas of the cell have yet to
be examined for design-rule violations. To make sure that the design-rule checker
verifies all the material that has been generated for a cell, programs that generate .mag
files should place the following rectangle in each file:
<< checkpaint >>
rect xbot ybot xtop ytop
This rectangle may appear anywhere a list of rectangles is allowed; immediately following
the timestamp line at the beginning of a .mag file is a good place. The coordinates xbot
etc. should be large enough to completely cover anything in the cell, and must surround
all this material by at least one lambda. Be careful, however, not to make this area too
ridiculously large. For example, if you use the maximum and minimum legal tile
coordinates, it will take the design-rule checker an extremely long time to recheck the
area.
SEE ALSO
magic(1)