Provided by: libfabric-dev_1.17.0-3ubuntu1_amd64 
NAME
fabric - Fabric Interface Library
SYNOPSIS
#include <rdma/fabric.h>
Libfabric is a high-performance fabric software library designed to provide low-latency
interfaces to fabric hardware.
OVERVIEW
Libfabric provides `process direct I/O' to application software communicating across
fabric software and hardware. Process direct I/O, historically referred to as RDMA,
allows an application to directly access network resources without operating system
interventions. Data transfers can occur directly to and from application memory.
There are two components to the libfabric software:
Fabric Providers
Conceptually, a fabric provider may be viewed as a local hardware NIC driver,
though a provider is not limited by this definition. The first component of
libfabric is a general purpose framework that is capable of handling different
types of fabric hardware. All fabric hardware devices and their software drivers
are required to support this framework. Devices and the drivers that plug into the
libfabric framework are referred to as fabric providers, or simply providers.
Provider details may be found in fi_provider(7).
Fabric Interfaces
The second component is a set of communication operations. Libfabric defines
several sets of communication functions that providers can support. It is not
required that providers implement all the interfaces that are defined; however,
providers clearly indicate which interfaces they do support.
FABRIC INTERFACES
The fabric interfaces are designed such that they are cohesive and not simply a union of
disjoint interfaces. The interfaces are logically divided into two groups: control
interfaces and communication operations. The control interfaces are a common set of
operations that provide access to local communication resources, such as address vectors
and event queues. The communication operations expose particular models of communication
and fabric functionality, such as message queues, remote memory access, and atomic
operations. Communication operations are associated with fabric endpoints.
Applications will typically use the control interfaces to discover local capabilities and
allocate necessary resources. They will then allocate and configure a communication
endpoint to send and receive data, or perform other types of data transfers, with remote
endpoints.
CONTROL INTERFACES
The control interfaces APIs provide applications access to network resources. This
involves listing all the interfaces available, obtaining the capabilities of the
interfaces and opening a provider.
fi_getinfo - Fabric Information
The fi_getinfo call is the base call used to discover and request fabric services
offered by the system. Applications can use this call to indicate the type of
communication that they desire. The results from fi_getinfo, fi_info, are used to
reserve and configure fabric resources.
fi_getinfo returns a list of fi_info structures. Each structure references a single
fabric provider, indicating the interfaces that the provider supports, along with a named
set of resources. A fabric provider may include multiple fi_info structures in the
returned list.
fi_fabric - Fabric Domain
A fabric domain represents a collection of hardware and software resources that
access a single physical or virtual network. All network ports on a system that
can communicate with each other through the fabric belong to the same fabric
domain. A fabric domain shares network addresses and can span multiple providers.
libfabric supports systems connected to multiple fabrics.
fi_domain - Access Domains
An access domain represents a single logical connection into a fabric. It may map
to a single physical or virtual NIC or a port. An access domain defines the
boundary across which fabric resources may be associated. Each access domain
belongs to a single fabric domain.
fi_endpoint - Fabric Endpoint
A fabric endpoint is a communication portal. An endpoint may be either active or
passive. Passive endpoints are used to listen for connection requests. Active
endpoints can perform data transfers. Endpoints are configured with specific
communication capabilities and data transfer interfaces.
fi_eq - Event Queue
Event queues, are used to collect and report the completion of asynchronous
operations and events. Event queues report events that are not directly associated
with data transfer operations.
fi_cq - Completion Queue
Completion queues are high-performance event queues used to report the completion
of data transfer operations.
fi_cntr - Event Counters
Event counters are used to report the number of completed asynchronous operations.
Event counters are considered light-weight, in that a completion simply increments
a counter, rather than placing an entry into an event queue.
fi_mr - Memory Region
Memory regions describe application local memory buffers. In order for fabric
resources to access application memory, the application must first grant permission
to the fabric provider by constructing a memory region. Memory regions are
required for specific types of data transfer operations, such as RMA transfers (see
below).
fi_av - Address Vector
Address vectors are used to map higher level addresses, such as IP addresses, which
may be more natural for an application to use, into fabric specific addresses. The
use of address vectors allows providers to reduce the amount of memory required to
maintain large address look-up tables, and eliminate expensive address resolution
and look-up methods during data transfer operations.
DATA TRANSFER INTERFACES
Fabric endpoints are associated with multiple data transfer interfaces. Each interface
set is designed to support a specific style of communication, with an endpoint allowing
the different interfaces to be used in conjunction. The following data transfer
interfaces are defined by libfabric.
fi_msg - Message Queue
Message queues expose a simple, message-based FIFO queue interface to the
application. Message data transfers allow applications to send and receive data
with message boundaries being maintained.
fi_tagged - Tagged Message Queues
Tagged message lists expose send/receive data transfer operations built on the
concept of tagged messaging. The tagged message queue is conceptually similar to
standard message queues, but with the addition of 64-bit tags for each message.
Sent messages are matched with receive buffers that are tagged with a similar
value.
fi_rma - Remote Memory Access
RMA transfers are one-sided operations that read or write data directly to a remote
memory region. Other than defining the appropriate memory region, RMA operations
do not require interaction at the target side for the data transfer to complete.
fi_atomic - Atomic
Atomic operations can perform one of several operations on a remote memory region.
Atomic operations include well-known functionality, such as atomic-add and compare-
and-swap, plus several other pre-defined calls. Unlike other data transfer
interfaces, atomic operations are aware of the data formatting at the target memory
region.
LOGGING INTERFACE
Logging can be controlled using the FI_LOG_LEVEL, FI_LOG_PROV, and FI_LOG_SUBSYS
environment variables.
FI_LOG_LEVEL
FI_LOG_LEVEL controls the amount of logging data that is output. The following log
levels are defined.
- Warn Warn is the least verbose setting and is intended for reporting errors or warnings.
- Trace
Trace is more verbose and is meant to include non-detailed output helpful to
tracing program execution.
- Info Info is high traffic and meant for detailed output.
- Debug
Debug is high traffic and is likely to impact application performance. Debug
output is only available if the library has been compiled with debugging enabled.
FI_LOG_PROV
The FI_LOG_PROV environment variable enables or disables logging from specific
providers. Providers can be enabled by listing them in a comma separated fashion.
If the list begins with the `^' symbol, then the list will be negated. By default
all providers are enabled.
Example: To enable logging from the psm and sockets provider: FI_LOG_PROV=“psm,sockets”
Example: To enable logging from providers other than psm: FI_LOG_PROV=“^psm”
FI_LOG_SUBSYS
The FI_LOG_SUBSYS environment variable enables or disables logging at the subsystem
level. The syntax for enabling or disabling subsystems is similar to that used for
FI_LOG_PROV. The following subsystems are defined.
- core Provides output related to the core framework and its management of providers.
- fabric
Provides output specific to interactions associated with the fabric object.
- domain
Provides output specific to interactions associated with the domain object.
- ep_ctrl
Provides output specific to endpoint non-data transfer operations, such as CM
operations.
- ep_data
Provides output specific to endpoint data transfer operations.
- av Provides output specific to address vector operations.
- cq Provides output specific to completion queue operations.
- eq Provides output specific to event queue operations.
- mr Provides output specific to memory registration.
PROVIDER INSTALLATION AND SELECTION
The libfabric build scripts will install all providers that are supported by the
installation system. Providers that are missing build prerequisites will be disabled.
Installed providers will dynamically check for necessary hardware on library
initialization and respond appropriately to application queries.
Users can enable or disable available providers through build configuration options. See
`configure –help' for details. In general, a specific provider can be controlled using
the configure option `–enable-'. For example, `–enable-udp' (or `–enable-udp=yes') will
add the udp provider to the build. To disable the provider, `–enable-udp=no' can be used.
Providers can also be enable or disabled at run time using the FI_PROVIDER environment
variable. The FI_PROVIDER variable is set to a comma separated list of providers to
include. If the list begins with the `^' symbol, then the list will be negated.
Example: To enable the udp and tcp providers only, set: FI_PROVIDER=“udp,tcp”
The fi_info utility, which is included as part of the libfabric package, can be used to
retrieve information about which providers are available in the system. Additionally, it
can retrieve a list of all environment variables that may be used to configure libfabric
and each provider. See fi_info(1) for more details.
ENVIRONMENT VARIABLE CONTROLS
Core features of libfabric and its providers may be configured by an administrator through
the use of environment variables. Man pages will usually describe the most commonly
accessed variables, such as those mentioned above. However, libfabric defines interfaces
for publishing and obtaining environment variables. These are targeted for providers, but
allow applications and users to obtain the full list of variables that may be set, along
with a brief description of their use.
A full list of variables available may be obtained by running the fi_info application,
with the -e or –env command line option.
NOTES
System Calls
Because libfabric is designed to provide applications direct access to fabric hardware,
there are limits on how libfabric resources may be used in conjunction with system calls.
These limitations are notable for developers who may be familiar programming to the
sockets interface. Although limits are provider specific, the following restrictions
apply to many providers and should be adhered to by applications desiring portability
across providers.
fork Fabric resources are not guaranteed to be available by child processes. This
includes objects, such as endpoints and completion queues, as well as application
controlled data buffers which have been assigned to the network. For example, data
buffers that have been registered with a fabric domain may not be available in a
child process because of copy on write restrictions.
CUDA deadlock
In some cases, calls to cudaMemcpy within libfabric may result in a deadlock. This
typically occurs when a CUDA kernel blocks until a cudaMemcpy on the host completes. To
avoid this deadlock, cudaMemcpy may be disabled by setting FI_HMEM_CUDA_ENABLE_XFER=0. If
this environment variable is set and there is a call to cudaMemcpy with libfabric, a
warning will be emitted and no copy will occur. Note that not all providers support this
option.
Another mechanism which can be used to avoid deadlock is Nvidia’s gdrcopy. Using gdrcopy
requires an external library and kernel module available at
https://github.com/NVIDIA/gdrcopy. Libfabric must be configured with gdrcopy support
using the --with-gdrcopy option, and be run with FI_HMEM_CUDA_USE_GDRCOPY=1. This may be
used in conjunction with the above option to provide a method for copying to/from CUDA
device memory when cudaMemcpy cannot be used. Again, this may not be supported by all
providers.
ABI CHANGES
libfabric releases maintain compatibility with older releases, so that compiled
applications can continue to work as-is, and previously written applications will compile
against newer versions of the library without needing source code changes. The changes
below describe ABI updates that have occurred and which libfabric release corresponds to
the changes.
Note that because most functions called by applications actually call static inline
functions, which in turn reference function pointers in order to call directly into
providers, libfabric only exports a handful of functions directly. ABI changes are
limited to those functions, most notably the fi_getinfo call and its returned attribute
structures.
The ABI version is independent from the libfabric release version.
ABI 1.0
The initial libfabric release (1.0.0) also corresponds to ABI version 1.0. The 1.0 ABI
was unchanged for libfabric major.minor versions 1.0, 1.1, 1.2, 1.3, and 1.4.
ABI 1.1
A number of external data structures were appended starting with libfabric version 1.5.
These changes included adding the fields to the following data structures. The 1.1 ABI
was exported by libfabric versions 1.5 and 1.6.
fi_fabric_attr
Added api_version
fi_domain_attr
Added cntr_cnt, mr_iov_limit, caps, mode, auth_key, auth_key_size, max_err_data,
and mr_cnt fields. The mr_mode field was also changed from an enum to an integer
flag field.
fi_ep_attr
Added auth_key_size and auth_key fields.
ABI 1.2
The 1.2 ABI version was exported by libfabric versions 1.7 and 1.8, and expanded the
following structure.
fi_info
The fi_info structure was expanded to reference a new fabric object, fid_nic. When
available, the fid_nic references a new set of attributes related to network
hardware details.
ABI 1.3
The 1.3 ABI version was exported by libfabric versions 1.9, 1.10, and 1.11. Added new
fields to the following attributes:
fi_domain_attr
Added tclass
fi_tx_attr
Added tclass
ABI 1.4
The 1.4 ABI version was exported by libfabric 1.12. Added fi_tostr_r, a thread-safe (re-
entrant) version of fi_tostr.
ABI 1.5
ABI version starting with libfabric 1.13. Added new fi_open API call.
ABI 1.6
ABI version starting with libfabric 1.14. Added fi_log_ready for providers.
SEE ALSO
fi_info(1), fi_provider(7), fi_getinfo(3), fi_endpoint(3), fi_domain(3), fi_av(3),
fi_eq(3), fi_cq(3), fi_cntr(3), fi_mr(3)
AUTHORS
OpenFabrics.