Ubuntu Manpage: ocf_heartbeat_IPaddr2 - Manages virtual IPv4 and IPv6 addresses (Linux specific version)

Provided by: resource-agents-base_4.15.1-2ubuntu3_all

NAME

       ocf_heartbeat_IPaddr2 - Manages virtual IPv4 and IPv6 addresses (Linux specific version)

SYNOPSIS

       IPaddr2 [start | stop | status | monitor | meta-data | validate-all]

DESCRIPTION

       This Linux-specific resource manages IP alias IP addresses. It can add an IP alias, or
       remove one. In addition, it can implement Cluster Alias IP functionality if invoked as a
       clone resource.

       If used as a clone, "shared address with a trivial, stateless (autonomous)
       load-balancing/mutual exclusion on ingress" mode gets applied (as opposed to "assume
       resource uniqueness" mode otherwise). For that, Linux firewall (kernel and userspace) is
       assumed, and since recent distributions are ambivalent in plain "iptables" command to
       particular back-end resolution, "iptables-legacy" (when present) gets prioritized so as to
       avoid incompatibilities (note that respective ipt_CLUSTERIP firewall extension in use here
       is, at the same time, marked deprecated, yet said "legacy" layer can make it workable,
       literally, to this day) with "netfilter" one (as in "iptables-nft"). In that case, you
       should explicitly set clone-node-max >= 2, and/or clone-max < number of nodes. In case of
       node failure, clone instances need to be re-allocated on surviving nodes. This would not
       be possible if there is already an instance on those nodes, and clone-node-max=1 (which is
       the default).

       When the specified IP address gets assigned to a respective interface, the resource agent
       sends unsolicited ARP (Address Resolution Protocol, IPv4) or NA (Neighbor Advertisement,
       IPv6) packets to inform neighboring machines about the change. This functionality is
       controlled for both IPv4 and IPv6 by shared 'arp_*' parameters.

SUPPORTED PARAMETERS

ip
The IPv4 (dotted quad notation) or IPv6 address (colon hexadecimal notation) example
IPv4 "192.168.1.1". example IPv6 "2001:db8:DC28:0:0:FC57:D4C8:1FFF".

(unique, required, string, no default)

nic
The base network interface on which the IP address will be brought online. If left
empty, the script will try and determine this from the routing table.

Do NOT specify an alias interface in the form eth0:1 or anything here; rather, specify
the base interface only. If you want a label, see the iflabel parameter.

Prerequisite:

There must be at least one static IP address, which is not managed by the cluster,
assigned to the network interface. If you can not assign any static IP address on the
interface, modify this kernel parameter:

sysctl -w net.ipv4.conf.all.promote_secondaries=1 # (or per device)

(optional, string, no default)

cidr_netmask
The netmask for the interface in CIDR format (e.g., 24 and not 255.255.255.0)

If unspecified, the script will also try to determine this from the routing table.

(optional, string, no default)

broadcast
Broadcast address associated with the IP. It is possible to use the special symbols
'+' and '-' instead of the broadcast address. In this case, the broadcast address is
derived by setting/resetting the host bits of the interface prefix.

(optional, string, no default)

iflabel
You can specify an additional label for your IP address here. This label is appended
to your interface name.

The kernel allows alphanumeric labels up to a maximum length of 15 characters
including the interface name and colon (e.g. eth0:foobar1234)

A label can be specified in nic parameter but it is deprecated. If a label is
specified in nic name, this parameter has no effect.

(optional, string, no default)

lvs_support
Enable support for LVS Direct Routing configurations. In case a IP address is stopped,
only move it to the loopback device to allow the local node to continue to service
requests, but no longer advertise it on the network.

Notes for IPv6: It is not necessary to enable this option on IPv6. Instead, enable
'lvs_ipv6_addrlabel' option for LVS-DR usage on IPv6.

(optional, boolean, default false)

lvs_ipv6_addrlabel
Enable adding IPv6 address label so IPv6 traffic originating from the address's
interface does not use this address as the source. This is necessary for LVS-DR health
checks to realservers to work. Without it, the most recently added IPv6 address
(probably the address added by IPaddr2) will be used as the source address for IPv6
traffic from that interface and since that address exists on loopback on the
realservers, the realserver response to pings/connections will never leave its
loopback. See RFC3484 for the detail of the source address selection.

See also 'lvs_ipv6_addrlabel_value' parameter.

(optional, boolean, default true)

lvs_ipv6_addrlabel_value
Specify IPv6 address label value used when 'lvs_ipv6_addrlabel' is enabled. The value
should be an unused label in the policy table which is shown by 'ip addrlabel list'
command. You would rarely need to change this parameter.

(optional, integer, default 99)

mac
Set the interface MAC address explicitly. Currently only used in case of the Cluster
IP Alias. Leave empty to chose automatically.

(optional, string, no default)

clusterip_hash
Specify the hashing algorithm used for the Cluster IP functionality.

(optional, string, default "sourceip-sourceport")

unique_clone_address
If true, add the clone ID to the supplied value of IP to create a unique address to
manage

(optional, boolean, default false)

arp_interval
Specify the interval between unsolicited ARP (IPv4) or NA (IPv6) packets in
milliseconds.

This parameter is deprecated and used for the backward compatibility only. It is
effective only for the send_arp binary which is built with libnet, and send_ua for
IPv6. It has no effect for other arp_sender.

(optional, integer, default 200)

arp_count
Number of unsolicited ARP (IPv4) or NA (IPv6) packets to send at resource
initialization.

(optional, integer, default 5)

arp_count_refresh
For IPv4, number of unsolicited ARP packets to send during resource monitoring. Doing
so helps mitigate issues of stuck ARP caches resulting from split-brain situations.

(optional, integer, default 0)

arp_bg
Whether or not to send the ARP (IPv4) or NA (IPv6) packets in the background. The
default is true for IPv4 and false for IPv6.

(optional, string, no default)

arp_sender
For IPv4, the program to send ARP packets with on start. Available options are: -
send_arp: default - ipoibarping: default for infiniband interfaces if ipoibarping is
available - iputils_arping: use arping in iputils package - libnet_arping: use another
variant of arping based on libnet

(optional, string, no default)

send_arp_opts
For IPv4, extra options to pass to the arp_sender program. Available options are vary
depending on which arp_sender is used.

A typical use case is specifying '-A' for iputils_arping to use ARP REPLY instead of
ARP REQUEST as Gratuitous ARPs.

(optional, string, no default)

flush_routes
Flush the routing table on stop. This is for applications which use the cluster IP
address and which run on the same physical host that the IP address lives on. The
Linux kernel may force that application to take a shortcut to the local loopback
interface, instead of the interface the address is really bound to. Under those
circumstances, an application may, somewhat unexpectedly, continue to use connections
for some time even after the IP address is deconfigured. Set this parameter in order
to immediately disable said shortcut when the IP address goes away.

(optional, boolean, default false)

run_arping
For IPv4, whether or not to run arping for collision detection check.

(optional, string, default "false")

nodad
For IPv6, do not perform Duplicate Address Detection when adding the address.

(optional, string, default "false")

noprefixroute
Use noprefixroute flag (see 'man ip-address').

(optional, string, default "false")

preferred_lft
For IPv6, set the preferred lifetime of the IP address. This can be used to ensure
that the created IP address will not be used as a source address for routing. Expects
a value as specified in section 5.5.4 of RFC 4862.

(optional, string, default "forever")

network_namespace
Specifies the network namespace to operate within. The namespace must already exist,
and the interface to be used must be within the namespace.

(optional, string, no default)

SUPPORTED ACTIONS

       This resource agent supports the following actions (operations):

       start
           Starts the resource. Suggested minimum timeout: 20s.

       stop
           Stops the resource. Suggested minimum timeout: 20s.

       status
           Performs a status check. Suggested minimum timeout: 20s. Suggested interval: 10s.

       monitor
           Performs a detailed status check. Suggested minimum timeout: 20s. Suggested interval:
           10s.

       meta-data
           Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5s.

       validate-all
           Performs a validation of the resource configuration. Suggested minimum timeout: 20s.

EXAMPLE CRM SHELL

       The following is an example configuration for a IPaddr2 resource using the crm(8) shell:

           primitive p_IPaddr2 ocf:heartbeat:IPaddr2 \
             params \
               ip=string \
             op monitor depth="0" timeout="20s" interval="10s"

EXAMPLE PCS

       The following is an example configuration for a IPaddr2 resource using pcs(8)

           pcs resource create p_IPaddr2 ocf:heartbeat:IPaddr2 \
             ip=string \
             op monitor OCF_CHECK_LEVEL="0" timeout="20s" interval="10s"

AUTHOR

       ClusterLabs contributors (see the resource agent source for information about individual
       authors)

NAME

SYNOPSIS

DESCRIPTION

SUPPORTED PARAMETERS

SUPPORTED ACTIONS

EXAMPLE CRM SHELL

EXAMPLE PCS

SEE ALSO

AUTHOR