NAME

       ocf_pacemaker_HealthSMART - SMART health status

SYNOPSIS

       [OCF_RESKEY_state=string] [OCF_RESKEY_drives=string] [OCF_RESKEY_devices=string]
       [OCF_RESKEY_temp_lower_limit=string] [OCF_RESKEY_temp_upper_limit=string]
       [OCF_RESKEY_temp_warning=string] [OCF_RESKEY_smartctl=string] [OCF_RESKEY_dampen=string]

       HealthSMART [start | stop | monitor | meta-data | validate-all | reload-agent]

DESCRIPTION

       System health agent that checks the S.M.A.R.T. status of the given drives and updates the
       #health-smart attribute.

SUPPORTED PARAMETERS

       OCF_RESKEY_state = string [/HealthSMART-.state]
           State file

           Location to store the resource state in.

       OCF_RESKEY_drives = string [/dev/sda]
           Drives to check

           The drive(s) to check as a SPACE separated list. Enter the full path to the device,
           e.g. "/dev/sda".

       OCF_RESKEY_devices = string
           Device types

           The device type(s) to assume for the drive(s) being tested as a SPACE separated list.

       OCF_RESKEY_temp_lower_limit = string [0]
           Lower limit for the red smart attribute

           Lower limit of the temperature in deg C of the drive(s). Below this limit the status
           of #health-smart will be red.

       OCF_RESKEY_temp_upper_limit = string [60]
           Upper limit for red smart attribute

           Upper limit of the temperature if deg C of the drives(s). If the drive reports a
           temperature higher than this value the status of #health-smart will be red.

       OCF_RESKEY_temp_warning = string [5]
           Deg C below/above the upper limits for yellow smart attribute

           Number of deg C below/above the upper/lower temp limits at which point the status of
           #health-smart will change to yellow.

       OCF_RESKEY_smartctl = string [/usr/sbin/smartctl]
           The path to the smartctl program

           The path to the smartctl program, used for querying device health.

       OCF_RESKEY_dampen = string [5s]
           Dampening interval

           The time to wait (dampening) for further changes to occur

AUTHOR

       Andrew Beekhof <andrew@beekhof.net>
           Author.