Provided by: sbuild_0.87.1ubuntu2_all 
NAME
sbuild-setup - sbuild setup procedure
DESCRIPTION
sbuild uses chroots to build packages within, to provide a minimal and consistent build
environment. This man page describes the procedure to create a chroot by hand using
debootstrap. These are only guidelines; depending upon the setup required, several of the
steps may be omitted entirely.
QUICK START
Simply running sbuild-createchroot will perform all the setup steps described in detail
below. See the section “sbuild-createchroot” below, as well as sbuild-createchroot(8).
CHROOT SETUP
This guide sets up a lenny chroot on a powerpc machine. Adjust the names for other suites
and architectures.
1. Run debootstrap to create the chroot
# mkdir -p /srv/chroot/lenny
The author has each chroot as a separate LVM logical volume (LV). Create and mount an LV
here if required:
# lvcreate -L 4G -n lenny_chroot -Z y volume-group
Add to /etc/fstab and mount (see next section for full fstab example). Finally, run
debootstrap to create the chroot:
# debootstrap --variant=buildd lenny /srv/chroot/lenny http://deb.debian.org/debian/
2. Set up additional mounts
An example /etc/fstab:
/dev/volume-group/lenny_chroot \
/srv/chroot/lenny ext3 defaults 0 2
/dev/pts /srv/chroot/lenny/dev/pts none rw,bind 0 0
tmpfs /srv/chroot/lenny/dev/shm tmpfs defaults 0 0
proc /srv/chroot/lenny/proc proc defaults 0 0
/dev/volume-group/home \
/srv/chroot/lenny/home ext3 quota 0 0
/tmp /srv/chroot/lenny/tmp none rw,bind 0 0
/etc/passwd /srv/chroot/lenny/etc/passwd none ro,bind 0 0
/etc/shadow /srv/chroot/lenny/etc/shadow none ro,bind 0 0
/etc/group /srv/chroot/lenny/etc/group none ro,bind 0 0
/etc/gshadow /srv/chroot/lenny/etc/gshadow none ro,bind 0 0
/etc/resolv.conf \
/srv/chroot/lenny/etc/resolv.conf \
none ro,bind 0 0
If the bind mountpoints don't exist in the chroot, touch them:
# touch /srv/chroot/lenny/etc/resolv.conf
Next, mount them all.
Depending on your kernel version and security considerations, you may wish to do this part
slightly differently. With a Linux kernel, at least version 2.6 is required for bind
mounts, and devpts (CONFIG_UNIX98_PTYS) for /dev/pts. Other guides recommend copying the
files, but this method keeps them up-to-date at no cost.
If using sbuild with schroot, passwd, shadow, group, gshadow and resolv.conf can be
updated automatically at the start of each build, so no action is required here. schroot
can also automatically mount all of the extra filesystems, so all the other mounts may be
omitted.
To disable networking, don't bind mount /etc/resolv.conf. This will prevent APT from
working inside the chroot, but prevents package building from having working network
access (no nameservers).
3. Edit sources.list
Create or edit /srv/chroot/lenny/etc/apt/sources.list, and add all the APT sources
required to obtain binary and source packages for your chosen distribution:
deb http://security.debian.org/ lenny/updates main
deb-src http://security.debian.org/ lenny/updates main
deb http://deb.debian.org/debian/ lenny main
deb-src http://deb.debian.org/debian/ lenny main
4. Configure dchroot or schroot
This is entirely optional, but will make the chroot environment easier to access and
administer.
For dchroot, add the following line to /etc/dchroot.conf:
lenny /srv/chroot/lenny
For schroot, add a group to /etc/schroot/schroot.conf (or a new file
/etc/schroot/chroot.d/lenny), for example:
[lenny]
type=directory
description=Debian lenny (stable)
location=/srv/chroot/lenny
priority=2
groups=root,sbuild
root-groups=sbuild
aliases=stable
run-setup-scripts=true
run-session-scripts=true
For sudo, add a symbolic link to the directory /etc/sbuild/chroot, for example:
# mkdir -p /etc/sbuild/chroot
# ln -s /srv/chroot/lenny /etc/sbuild/chroot/lenny
5. Log into chroot
# dchroot -c lenny
or
$ schroot -c lenny -u root
6. Set up packages for sbuild
While running as root inside the chroot:
# apt-get update
# apt-get dist-upgrade
# apt-get install debconf
# dpkg-reconfigure -plow debconf
Answer the debconf questions as follows:
interface
choose 6/Noninteractive
priority
choose 1/Critical
You only need to run dpkg-reconfigure if you weren't asked the questions during the
debconf install. Next, install the packages required for building packages:
# apt-get install fakeroot build-essential
# apt-get install makedev
# cd /dev/
# /sbin/MAKEDEV generic
# touch /etc/mtab
For some security, we don't bind mount /dev, so it can't access e.g. USB devices
7. sbuild setup
While running as root inside the chroot:
# mkdir /build
# chown root:sbuild /build
# chmod 02775 /build
# mkdir -p /var/lib/sbuild/srcdep-lock
# chown -R root:sbuild /var/lib/sbuild
# chmod -R 02775 /var/lib/sbuild
Note that when using sbuild with schroot, this setup is done at the start of each build,
so is not required here.
8. Finished
Congratulations! You should now have a fully configured and operational chroot.
SBUILD-CREATECHROOT
This script will automatically perform a number of the steps described above, including:
• Running debootstrap.
• Setting up APT sources in /etc/apt/sources.list.
• Setting up a minimal /etc/passwd
• Setting up /build and /var/lib/sbuild with appropriate ownership and permissions.
After it has done this, you do still need to do some manual setup, completing the steps it
missed out above, for example.
USER SETUP
1. Group membership
As root, run:
# sbuild-adduser user
Alternatively, add the user to the sbuild group by hand:
# adduser user sbuild
2. ~/.sbuildrc
Configure the user's ~/.sbuildrc:
$ cp /usr/share/doc/sbuild/examples/example.sbuildrc ~user/.sbuildrc
Edit to set the correct mail address to send log files to, and the correct maintainer name
and/or uploader name.
3. Build directories
Create directories to contain packages and log files. (.sbuildrc may have configured
different locations; the default build directory is the current directory, and the default
$log_dir is ~/logs):
$ mkdir ~/logs
4. sudo setup
This step not required if schroot is used (which is the default, set in sbuild.conf). If
using sbuild with sudo (chroot_mode “split”), sudo needs configuring to give the user
permission to install and remove packages in the chroot, which requires root privileges.
Add the following lines to /etc/sudoers:
username ALL=NOPASSWD: ALL
Defaults:username env_keep+="APT_CONFIG DEBIAN_FRONTEND SHELL"
where username is the name of the user who will run sbuild.
5. Finished
The user should now be able to run sbuild.
$ sbuild ...
AUTHORS
Roger Leigh.
COPYRIGHT
Copyright © 2005-2008 Roger Leigh <rleigh@debian.org>
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
SEE ALSO
debootstrap(1), sbuild(1), sbuild-adduser(8), sbuild-createchroot(8).