Provided by: xen-utils-common_4.17.3+10-g091466ba55-1.1ubuntu3_amd64 
NAME
xen-vtpm - Xen virtual Trusted Platform Module (vTPM) subsystem
RUBRIC
Copyright (c) 2010-2012 United States Government, as represented by the Secretary of
Defense. All rights reserved. November 12 2012 Authors: Matthew Fioravante (JHUAPL),
Daniel De Graaf (NSA)
This document describes the virtual Trusted Platform Module (vTPM) subsystem for Xen. The
reader is assumed to have familiarity with building and installing Xen, Linux, and a basic
understanding of the TPM and vTPM concepts.
INTRODUCTION
The goal of this work is to provide a TPM functionality to a virtual guest operating
system (a DomU). This allows programs to interact with a TPM in a virtual system the same
way they interact with a TPM on the physical system. Each guest gets its own unique,
emulated, software TPM. However, each of the vTPM's secrets (Keys, NVRAM, etc) are
managed by a vTPM Manager domain, which seals the secrets to the Physical TPM. If the
process of creating each of these domains (manager, vTPM, and guest) is trusted, the vTPM
subsystem extends the chain of trust rooted in the hardware TPM to virtual machines in
Xen. Each major component of vTPM is implemented as a separate domain, providing secure
separation guaranteed by the hypervisor. The vTPM domains are implemented in mini-os to
reduce memory and processor overhead.
This mini-os vTPM subsystem was built on top of the previous vTPM work done by IBM and
Intel corporation.
DESIGN OVERVIEW
The architecture of vTPM is described below:
+------------------+
| Linux DomU | ...
| | ^ |
| v | |
| xen-tpmfront |
+------------------+
| ^
v |
+------------------+
| mini-os/tpmback |
| | ^ |
| v | |
| vtpm-stubdom | ...
| | ^ |
| v | |
| mini-os/tpmfront |
+------------------+
| ^
v |
+------------------+
| mini-os/tpmback |
| | ^ |
| v | |
| vtpmmgr-stubdom |
| | ^ |
| v | |
| mini-os/tpm_tis |
+------------------+
| ^
v |
+------------------+
| Hardware TPM |
+------------------+
Linux DomU
The Linux based guest that wants to use a vTPM. There many be more than one of these.
xen-tpmfront.ko
Linux kernel virtual TPM frontend driver. This driver provides vTPM access to a para-
virtualized Linux based DomU.
mini-os/tpmback
Mini-os TPM backend driver. The Linux frontend driver connects to this backend driver
to facilitate communications between the Linux DomU and its vTPM. This driver is also
used by vtpmmgr-stubdom to communicate with vtpm-stubdom.
vtpm-stubdom
A mini-os stub domain that implements a vTPM. There is a one to one mapping between
running vtpm-stubdom instances and logical vtpms on the system. The vTPM Platform
Configuration Registers (PCRs) are all initialized to zero.
mini-os/tpmfront
Mini-os TPM frontend driver. The vTPM mini-os domain vtpm-stubdom uses this driver to
communicate with vtpmmgr-stubdom. This driver could also be used separately to
implement a mini-os domain that wishes to use a vTPM of its own.
vtpmmgr-stubdom
A mini-os domain that implements the vTPM manager. There is only one vTPM manager and
it should be running during the entire lifetime of the machine. This domain regulates
access to the physical TPM on the system and secures the persistent state of each
vTPM.
mini-os/tpm_tis
Mini-os TPM version 1.2 TPM Interface Specification (TIS) driver. This driver used by
vtpmmgr-stubdom to talk directly to the hardware TPM. Communication is facilitated by
mapping hardware memory pages into vtpmmgr-stubdom.
Hardware TPM
The physical TPM that is soldered onto the motherboard.
INSTALLATION
Prerequisites:
You must have an x86 machine with a TPM on the motherboard. The only extra software
requirement for compiling vTPM is cmake. You must use libxl to manage domains with vTPMs;
'xm' is deprecated and does not support vTPMs.
Compiling the Xen tree:
Compile and install the Xen tree as usual; be sure that the vTPM domains are enabled when
you run configure.
Compiling the LINUX dom0 kernel:
Because the TPM manager uses direct access to the physical TPM, it may interfere with
access to the TPM by dom0. The simplest solution for this is to prevent dom0 from
accessing the physical TPM by compiling the kernel without a driver or blacklisting the
module. If dom0 needs a TPM but does not need to use it during the boot process (i.e. it
is not using IMA), a virtual TPM can be attached to dom0 after the system is booted.
Access to the physical TPM may be required in order to manage the NVRAM or to perform
other advanced operations where the vTPM is insufficient. In order to prevent
interference, the TPM Manager and dom0 should use different values for the TPM's locality;
since Linux always uses locality 0, using locality 2 for the TPM Manager is recommended.
If both Linux and the TPM Manager attempt to access the TPM at the same time, the TPM
device will return a busy status; some applications will consider this a fatal error
instead of retrying the command at a later time. If a vTPM gets an error when loading its
key, it will currently generate a fresh vTPM image (with a new EK, SRK, and blank NVRAM).
Compiling the LINUX domU kernel:
The domU kernel used by domains with vtpms must include the xen-tpmfront.ko driver. It can
be built directly into the kernel or as a module; however, some features such as IMA
require the TPM to be built in to the kernel.
CONFIG_TCG_TPM=y
CONFIG_TCG_XEN=y
VTPM MANAGER SETUP
Manager disk image setup:
The vTPM Manager requires a disk image to store its encrypted data. The image does not
require a filesystem and can live anywhere on the host disk. The image is not large; the
Xen 4.5 vtpmmgr is limited to using the first 2MB of the image but can support more than
20,000 vTPMs.
Manager config file:
The vTPM Manager domain (vtpmmgr-stubdom) must be started like any other Xen virtual
machine and requires a config file. The manager requires a disk image for storage and
permission to access the hardware memory pages for the TPM. The disk must be presented as
"hda", and the TPM memory pages are passed using the iomem configuration parameter. The
TPM TIS uses 5 pages of IO memory (one per locality) that start at physical address
0xfed40000. By default, the TPM manager uses locality 0 (so only the page at 0xfed40 is
needed); this can be changed on the domain's command line. For full functionality in deep
quotes, using locality 2 is required to manipulate PCR 20-22.
Starting and stopping the manager:
The vTPM manager should be started at boot; you may wish to create an init script to do
this. If a domain builder is used, the TPM Manager should be started by the domain
builder to minimize the trusted computing base for the vTPM manager's secrets.
Once initialization is complete you should see the following:
INFO[VTPM]: Waiting for commands from vTPM's:
The TPM Manager does not respond to shutdown requests; use the destroy command to shut it
down.
VTPM AND LINUX PVM SETUP
vTPM disk image setup:
The vTPM requires a disk image to store its persistent data (RSA keys, NVRAM, etc). The
image does not require a filesystem. The image does not need to be large; 2 Mb should be
sufficient.
vTPM config file:
The vTPM domain requires a configuration file like any other domain. The vTPM requires a
disk image for storage and a TPM frontend driver to communicate with the manager. You are
required to generate a uuid for this vtpm, which is specified on the "vtpm=" line that
describes its connection to the vTPM Manager. The uuidgen application may be used to
generate a uuid, or one from the output of the "manage-vtpmmgr.pl vtpm-add" command may be
used to create a vTPM belonging to a specific group.
If you wish to clear the vTPM data you can either recreate the disk image or change the
uuid.
Linux Guest config file:
The Linux guest config file needs to be modified to include the Linux tpmfront driver. Add
the following line:
vtpm=["backend=domu-vtpm"]
Currently only Linux guests are supported (PV or HVM with PV drivers).
While attaching a vTPM after a guest is booted (using xl vtpm-attach) is supported, the
attached vTPM will not have a record of the boot of the attached guest. Furthermore, if
the vTPM has been freshly created, a malicious guest could then extend any values into
PCRs, potentially forging its boot configuration. Attaching a vTPM to a running domain
should only be used for trusted domains or when measurements have already been sent to the
vTPM from another source.
Using the vTPM in the guest:
If xen-tpmfront was compiled as a module, it must be loaded it in the guest.
# modprobe xen-tpmfront
After the Linux domain boots and the xen-tpmfront driver is loaded, you should see the
following on the vtpm console:
Info: VTPM attached to Frontend X/Y
You can quickly test the vTPM by using the sysfs interface:
# cat /sys/devices/vtpm-0/pubek
# cat /sys/devices/vtpm-0/pcrs
If you have trousers and tpm_tools installed on the guest, the tpm_version command should
return the following:
The version command should return the following:
TPM 1.2 Version Info:
Chip Version: 1.2.0.7
Spec Level: 2
Errata Revision: 1
TPM Vendor ID: ETHZ
TPM Version: 01010000
Manufacturer Info: 4554485a
You should also see the command being sent to the vtpm console as well as the vtpm saving
its state. You should see the vtpm key being encrypted and stored on the vtpmmgr console.
You may wish to write a script to start your vtpm and guest together and to destroy the
vtpm when the guest shuts down.
INTEGRATION WITH PV-GRUB
The vTPM currently starts up with all PCRs set to their default values (all zeros for the
lower 16). This means that any decisions about the trustworthiness of the created domain
must be made based on the environment that created the vTPM and the domU; for example, a
system that only constructs images using a trusted configuration and guest kernel be able
to provide guarantees about the guests and any measurements done that kernel (such as the
IMA TCB log). Guests wishing to use a custom kernel in such a secure environment are
often started using the pv-grub bootloader as the kernel, which then can load the
untrusted kernel without needing to parse an untrusted filesystem and kernel in dom0. If
the pv-grub stub domain succeeds in connecting to a vTPM, it will extend the hash of the
kernel that it boots into PCR #4, and will extend the command line and initrd into PCR #5
before booting so that a domU booted in this way can attest to its early boot state.
MORE INFORMATION
See <xen-vtpmmgr(7)> for more details about how the manager domain works, how to use it,
and its command line parameters.
VTPM DOMAIN OPERATION
The vtpm-stubdom is a mini-OS domain that emulates a TPM for the guest OS to use. It is a
small wrapper around the Berlios TPM emulator version 0.7.4. Commands are passed from the
linux guest via the mini-os TPM backend driver. vTPM data is encrypted and stored via a
disk image provided to the virtual machine. The key used to encrypt the data along with a
hash of the vTPM's data is sent to the vTPM manager for secure storage and later
retrieval. The vTPM domain communicates with the manager using a mini-os tpm front/back
device pair.
VTPM DOMAIN COMMAND LINE ARGUMENTS
Command line arguments are passed to the domain via the 'extra' parameter in the VM config
file. Each parameter is separated by white space. For example:
extra="foo=bar baz"
List of Arguments:
loglevel=<LOG>
Controls the amount of logging printed to the console. The possible values for <LOG>
are:
• error
• info (default)
• debug
clear
Start the Berlios emulator in "clear" mode. (default)
save
Start the Berlios emulator in "save" mode.
deactivated
Start the Berlios emulator in "deactivated" mode. See the Berlios TPM emulator
documentation for details about the startup mode. For all normal use, always use clear
which is the default. You should not need to specify any of these.
maintcmds=<1|0>
Enable to disable the TPM maintenance commands. These commands are used by tpm
manufacturers and thus open a security hole. They are disabled by default.
hwinitpcr=<PCRSPEC>
Initialize the virtual Platform Configuration Registers (PCRs) with PCR values from
the hardware TPM. Each pcr specified by <PCRSPEC> will be initialized with the value
of that same PCR in TPM once at startup. By default all PCRs are zero initialized.
Possible values of <PCRSPEC> are:
• all: copy all pcrs
• none: copy no pcrs (default)
• <N>: copy pcr n
• <X-Y>: copy pcrs x to y (inclusive)
These can also be combined by comma separation, for example: "hwinitpcrs=5,12-16" will
copy pcrs 5, 12, 13, 14, 15, and 16.
REFERENCES
Berlios TPM Emulator: <https://github.com/PeterHuewe/tpm-emulator>