NAME

       adelsystem_cbi - Driver for the ADELSYSTEM CB/CBI DC-UPS

SYNOPSIS

       adelsystem_cbi -h

       adelsystem_cbi -a DEVICE_NAME [OPTIONS]

           Note
           This man page only documents the specific features of the adelsystem_cbi driver. For
           information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This is the driver for the adelsystem cb/cbi dc-ups devices.

       The driver has been tested against CBI2801224A, all in one 12/24Vdc DC-UPS.

       More information about this UPS can be found here:
           https://www.adelsystem.com/en/products/dc-ups-/

EXTRA ARGUMENTS

       This driver supports the following optional settings in the ups.conf(5) file:

   Serial:
       ser_baud_rate=value
           A integer specifying the serial port baud rate (default 9600).

       ser_data_bit=value
           A integer specifying the serial port data bit (default 8).

       ser_parity=value
           A character specifying the serial port parity (default N).

       ser_stop_bit=value
           An integer specifying the serial port stop bit (default 1).

   Modbus:
       dev_slave_id=value
           An integer specifying the device modbus slave ID (default 1).

CONFIGURATION

       Here is an example of adelsystem_cbi driver configuration in ups.conf file:

           [adelsystem_cbi]
             driver = adelsystem_cbi
             port = /dev/ttyUSB0
             desc = "adelsystem cb/cbi ups driver"
             # serial settings
             ser_baud_rate = 9600
             ser_parity = N
             ser_data_bit = 8
             ser_stop_bit = 1
             # modbus slave id
             dev_slave_id = 5

INSTANT COMMANDS

       This driver support the following instant commands:

       load.off
           executes "instant poweroff"

INSTALLATION

       This driver is not built by default. You can build it by installing libmodbus and running
       configure --with-modbus=yes.

       You also need to give proper permissions on the local serial device file (/dev/ttyUSB0 for
       example) to allow the run-time NUT driver user account to access it.

AUTHOR

       Dimitris Economou <dimitris.s.economou@gmail.com>

SEE ALSO

   The core driver:
       nutupsdrv(8), ups.conf(5)

   Internet resources:
       •   The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

       •   libmodbus home page: http://libmodbus.org