Provided by: openbgpd_8.6-1_amd64 
NAME
bgpctl — control the BGP routing daemon
SYNOPSIS
bgpctl [-jnV] [-s socket] command [argument ...]
DESCRIPTION
The bgpctl program controls the bgpd(8) daemon. Commands may be abbreviated to the minimum
unambiguous prefix; for example, s su for show summary.
The options are as follows:
-j Create output as JSON object.
-n Show neighbors' IP addresses instead of their description.
-s socket
Use socket to communicate with bgpd(8) instead of the default
/run/openbgpd/bgpd.sock.<rdomain> where <rdomain> is the routing domain bgpctl is
running in. To administer bgpd(8) in a different routing domain, run bgpctl in said
routing domain.
-V Show the version and exit.
The commands are as follows:
fib [table number] couple
Insert the learned routes into the specified Forwarding Information Base a.k.a. the
kernel routing table.
fib [table number] decouple
Remove the learned routes from the specified Forwarding Information Base a.k.a. the
kernel routing table.
flowspec add family rule [set argument ...]
Add the specified flowspec rule to the list of announced rules. Currently family
can be either inet or inet6. It is possible to set various path attributes with
additional arguments. Adding a rule will replace an existing equal rule, including
rules loaded from the configuration. See bgpd.conf(5) for information on how to
write a flowspec rule.
flowspec delete family rule
Remove the specified flowspec rule from the list of announced rules.
flowspec flush
Remove all dynamically added (i.e. with bgpctl flowspec add) flowspec rules from the
list of announced rules.
flowspec show family
Show all announced flowspec rules. family, if given, limits the output to the given
address family. The supported families are inet and inet6.
log brief
Disable verbose debug logging.
log verbose
Enable verbose debug logging.
neighbor peer clear [reason]
Stop and restart the BGP session to the specified neighbor. If a reason is
provided, the reason is sent as Administrative Shutdown Communication to the
neighbor. peer may be the neighbor's address, description or the word group
followed by a group description.
neighbor peer destroy
Destroy a previously cloned peer. The peer must be down before calling this
function. peer may be the neighbor's address, description or the word group
followed by a group description.
neighbor peer down [reason]
Take the BGP session to the specified neighbor down. If a reason is provided, the
reason is sent as Administrative Shutdown Communication to the neighbor. peer may
be the neighbor's address, description or the word group followed by a group
description.
neighbor peer refresh
Request the neighbor to re-send all routes. Note that the neighbor is not obliged
to re-send all routes, or any routes at all, even if it announced the route refresh
capability. peer may be the neighbor's address, description or the word group
followed by a group description.
neighbor peer up
Bring the BGP session to the specified neighbor up. peer may be the neighbor's
address, description or the word group followed by a group description.
network add prefix [argument ...]
Add the specified prefix to the list of announced networks. It is possible to set
various path attributes with additional arguments. Adding a prefix will replace an
existing equal prefix, including prefixes loaded from the configuration.
network bulk add [argument ...]
Bulk add specified prefixes to the list of announced networks. Prefixes should be
sent via stdin. It is possible to set various path attributes with additional
arguments.
network bulk delete
Bulk remove the specified prefixes from the list of announced networks. Prefixes
should be sent via stdin.
network delete prefix
Remove the specified prefix from the list of announced networks.
network flush
Remove all dynamically added (i.e. with bgpctl network add) prefixes from the list
of announced networks.
network mrt file file filter
Import networks from an MRT table dump for debugging purposes. filter can be
specified similarly to the show mrt command. Only networks matching the filter will
be imported.
network show family
Show all announced networks. family, if given, limits the output to the given
address family. The supported families are inet and inet6.
reload [reason]
Reload the configuration file. Changes to the following neighbor options in
bgpd.conf(5) only take effect when the session is reset: ipsec and tcp md5sig.
show fib filter
Show routes from bgpd(8)'s view of the Forwarding Information Base. filter can be
an IP address, in which case the route to this address is shown, or a flag:
bgp Show only routes originating from bgpd(8) itself.
connected Show only connected routes.
inet Show only IPv4 routes.
inet6 Show only IPv6 routes.
nexthop Show only routes required to reach a BGP nexthop.
static Show only static routes.
table number Show the routing table with ID number instead of the default routing
table with ID 0.
show interfaces
Show the interface states.
show metrics
Dump various BGP statistics in OpenMetrics format.
show mrt [options] filter
Show routes from an MRT table dump file. filter can be an IP address, a CIDR
prefix, an AS filter, a combination or nothing:
address Show best matching route for address.
address/len Show RIB entry for this CIDR prefix.
address/len all Show all entries in the specified range.
address/len or-shorter Show all entries covering and including the specified
prefix.
as as Show all entries with as anywhere in the AS path.
empty-as Show all entries that are internal routes with no AS's in
the AS path.
neighbor ip Show only entries from the specified peer.
peer-as as Show all entries with as as leftmost AS.
source-as as Show all entries with as as rightmost AS.
transit-as as Show all entries with as anywhere but rightmost.
Additionally, the following options are defined:
detail Show more detailed output for matching routes.
family Limit the output to the given address family.
file name Read the MRT dump from file name instead of using stdin.
peers Print the neighbor table of MRT TABLE_DUMP_V2 dumps. Using this on other
table dumps will only show the neighbor of the first entry.
Multiple options and filters can be used at the same time.
show neighbor peer modifier
Show detailed information about the neighbor identified by peer, according to the
given modifier:
messages Show statistics about sent and received BGP messages.
terse Show statistics in an easily parseable terse format. The printed numbers
are the sent and received open, sent and received notifications, sent and
received updates, sent and received keepalives, and sent and received
route refresh messages plus the current and maximum prefix count, the
number of sent and received updates, sent and received withdraws, the
neighbor's address (or subnet, for a template), AS number, and finally
description.
timers Show the BGP timers.
peer may be the neighbor's address, description or the word group followed by a
group description.
show nexthop
Show the list of BGP nexthops and the result of their validity check.
show rib [options] filter
Show routes from the bgpd(8) Routing Information Base. filter can be an IP address,
a CIDR prefix, an AS filter or nothing:
address Show best matching route for address.
address/len Show RIB entry for this CIDR prefix.
address/len all Show all entries in the specified range.
address/len or-shorter Show all entries covering and including the specified
prefix.
as as Show all entries with as anywhere in the AS path.
avs (valid | unknown | invalid)
Show all entries with matching ASAP Validation State (AVS).
community community Show all entries with community community.
empty-as Show all entries that are internal routes with no AS's in
the AS path.
large-community large-community
Show all entries with large-community large-community.
memory Show RIB memory statistics.
neighbor peer Show only entries from the specified peer.
neighbor group description
Show only entries from the specified peer group.
ovs (valid | not-found | invalid)
Show all entries with matching Origin Validation State
(OVS).
path-id pathid Show only entries which match the specified pathid. Must be
used together with either neighbor or out.
peer-as as Show all entries with as as leftmost AS.
source-as as Show all entries with as as rightmost AS.
summary This is the same as the show summary command.
table rib Show only entries from the specified RIB table.
transit-as as Show all entries with as anywhere but rightmost.
Additionally, the following options are defined:
best Alias for selected.
detail Show more detailed output for matching routes.
disqualified Show only routes which are not eligible.
error Show only prefixes which are marked invalid and were treated as
withdrawn.
family Limit the output to the given address family.
filtered Show only routes which were filtered out. Requires rde rib Loc-RIB
include filtered to be set in the config.
in Show routes from the unfiltered Adj-RIB-In. The neighbor needs to be
specified.
leaked Show only routes where a route leak was detected.
out Show the filtered routes sent to a neighbor. The neighbor needs to be
specified.
selected Show only selected routes.
ssv Show each RIB entry as a single line, with fields separated by
semicolons. Only works if detail is specified.
Options are silently ignored when used together with summary or memory. Multiple
options can be used at the same time and the neighbor filter can be combined with
other filters.
show rtr
Show a list of all RTR sessions, including information about the session state.
show sets
Show a list summarizing all roa-set, as-set, prefix-set, and origin-set tables.
show summary
Show a list of all neighbors, including information about the session state and
message counters:
Neighbor Description of the neighbor.
AS Autonomous system number.
MsgRcvd Number of messages received from the neighbor.
MsgSent Number of messages sent to the neighbor.
OutQ Number of outgoing messages queued.
Up/Down Number of days and hours that the session has been up.
State/PrfRcvd State of the session / Number of routes received. The session is up
if there is no information for the State column (Established is not
displayed).
show summary terse
Show a list of all neighbors, including information about the session state, in a
terse format.
show tables
Show a list of all currently loaded fib routing tables.
FILES
/etc/bgpd.conf default bgpd(8) configuration file
/run/openbgpd/bgpd.sock default bgpd(8) control socket
SEE ALSO
bgpd.conf(5), bgpd(8), bgplg(8), bgplgsh(8)
HISTORY
The bgpctl program first appeared in OpenBSD 3.5.