Provided by: corosync-qdevice_3.0.3-2_amd64 
NAME
corosync-qdevice - QDevice daemon
SYNOPSIS
corosync-qdevice [-dfh] [-S option=value[,option2=value2,...]]
DESCRIPTION
corosync-qdevice is a daemon running on each node of a cluster. It provides a configured
number of votes to the quorum subsystem based on a third-party arbitrator's decision. Its
primary use is to allow a cluster to sustain more node failures than standard quorum rules
allow. It is recommended for clusters with an even number of nodes and highly recommended
for 2 node clusters.
OPTIONS
-d Forcefully turn on debug information without the need to change corosync.conf. For
bumping syslog messages priority to info, use this parameter twice.
-f Do not daemonize, run in the foreground.
-h Show short help text
-S Set advanced settings described in its own section below. This option shouldn't be
generally used because most of the options are not safe to change.
CONFIGURATION
corosync-qdevice reads its configuration from corosync.conf file.
The main configuration is within quorum.device sub-key. Each model also has its own
configuration within a similarly named sub-key.
model Specifies the model to be used. This parameter is required. corosync-qdevice is
modular and is able to support multiple different models. The model basically
defines what type of arbitrator is used. Currently only net is supported.
timeout
Specifies how often corosync-qdevice should call the votequorum_qdevice_poll
function. It is also used by the net model to adjust its hearbeat timeout. It is
recommended that you don't change this value. Default is 10000.
sync_timeout
Specifies how often corosync-qdevice should call the votequorum_qdevice_poll
function during a sync phase. It is recommended that you don't change this value.
Default is 30000.
votes The number of votes provided to the cluster by qdevice. Default is (number_of_nodes
- 1) or generally sum(votes_per_node) - 1.
quorum.device.heuristics subkey holds the configuration of the heuristics. Heuristics are
set of commands executed locally on startup, cluster membership change, successful connect
to corosync-qnetd and optionally also at regular times. Commands are executed in parallel.
When all commands finish successfully (their return error code is zero) on time,
heuristics have passed, otherwise they have failed. The heuristics result is sent to
corosync-qnetd and there it's used in calculations to determine which partition should be
quorate.
timeout
Specifies maximum time in milliseconds how long corosync-qdevice waits till the
heuristics commands finish. If some command doesn't finish before the timeout, it's
killed and heuristics fail. This timeout is used for heuristics executed at regular
times. Default value is half of the quorum.device.timeout, so 5000.
sync_timeout
Similar to quorum.device.heuristics.timeout but used during membership changes.
Default value is half of the quorum.device.sync_timeout, so 15000.
interval
Specifies interval between two regular heuristics execution. Default value is 3 *
quorum.device.timeout, so 30000.
mode Can be one of on, sync or off and specifies mode of operation of heuristics.
Default is off, which means heuristics are disabled. When sync is set, heuristics
are executed only during startup, membership change and when connection to
corosync-qnetd is established. When heuristics should be running also on regular
basis, this option should be set to on value.
exec_NAME
defines executables. NAME can be arbitrary valid cmap key name string and it has
no special meaning. The value of this variable must contain a command to execute.
The value is parsed (split) into arguments similarly as Bourne shell would do.
Quoting is possible by using backslash and double quotes.
quorum.device.net subkey holds the configuration for model net.
tls Can be one of on, off or required and specifies if tls should be used. on means a
connection with TLS is attempted first, but if the server doesn't advertise TLS
support then non-TLS will be used. off is used then TLS is not required and it's
then not even tried. This mode is the only one which doesn't need a properly
initialized NSS database. required means TLS is required and if the server doesn't
support TLS, qdevice will exit with error message. Default is on.
host Specifies the IP address or host name of the qnetd server to be used. This
parameter is required.
port Specifies TCP port of qnetd server. Default is 5403.
algorithm
Decision algorithm. Can be one of the ffsplit or lms. (actually there are also
test and 2nodelms, both of which are mainly for developers and shouldn't be used
for production clusters). For a description of what each algorithm means and how
the algorithms differ see their individual sections. Default value is ffsplit.
tie_breaker
can be one of lowest, highest or valid_node_id (number) values. It's used as a
fallback if qdevice has to decide between two or more equal partitions. lowest
means the partition with the lowest node id is chosen. highest means the partition
with highest node id is chosen. And valid_node_id means that the partition
containing the node with the given node id is chosen. Default is lowest.
connect_timeout
Timeout when corosync-qdevice is trying to connect to corosync-qnetd host. Default
is 0.8 * quorum.device.timeout.
force_ip_version
can be one of 0|4|6 and forces the software to use the given IP version. 0
(default value) means IPv6 is preferred and IPv4 should be used as a fallback.
keep_active_partition_tie_breaker
Can be one of on or off and specifies if keep active partition tie breaker should
be used. When this option is enabled and tie happens QNetd will prefer partition
with members of previously active (quorate) partition. This is hard-coded behavior
of LMS algorithm so this setting affects only FFSplit algorithm. Default is on.
Logging configuration is within the logging directive. corosync-qdevice parses and
supports only debug option. The logger_subsys sub-directive can be also used if subsys is
set to QDEVICE.
For corosync-qdevice to work correctly, the nodelist directive has to be used and properly
configured. Also the net model requires that totem.cluster_name option is set.
MODEL NET TLS CONFIGURATION
For model net to work using TLS, it's necessary to create the NSS database, import Qnetd
CA certificate, and get/distribute a valid client certificate.
If pcs is used (recommended) the following steps are not needed because pcs does them
automatically.
corosync-qdevice-net-certutil is the tool to perform required actions semi-automatically.
Please consult the help output of it and its man page. For a first time configuration it
may make sense to start with the -Q option.
If TLS is not required just edit corosync.conf file and set quorum.device.net.tls to off.
Depending on configuration of NSS (stored in nss.config file usually in /etc/crypto-
policies/back-ends/ directory) disabled ciphers or too short keys may be rejected. Proper
solution is to regenerate NSS databases for both corosync-qnetd and corosync-qdevice
daemons. As a quick workaround it's also possible to set environment variable
NSS_IGNORE_SYSTEM_POLICY=1 before running corosync-qdevice daemon.
When NSS is updated it may also be needed to upgrade database into new format. There is no
consensus on recommended way, but following command seems to work just fine (if qdevice
sysconfdir is set to /etc)
# certutil -N -d /etc/corosync/qdevice/net/nssdb -f /etc/corosync/qdevice/net/nssdb/pwdfile.txt
MODEL NET ALGORITHMS
Algorithms are used to change behavior of how corosync-qnetd provides votes to a given
node/partition. Currently there are two algorithms supported.
ffsplit
This one makes sense only for clusters with an even number of nodes. It provides
exactly one vote to the partition with the highest number of active nodes. If there
are two exactly similar partitions, it provides its vote to the partition with
higher score. The score is computed as (number_of_connected_nodes +
number_of_connected_nodes_with_passed_heuristics -
number_of_connected_nodes_with_failed_heuristics) If the scores are equal, the vote
is provided to partition with the most clients connected to the qnetd server. If
this number is also equal, then the tie_breaker is used. It is able to transition
its vote if the currently active partition becomes partitioned and a non-active
partition still has at least 50% of the active nodes. Because of this, a vote is
not provided if the qnetd connection is not active.
To use this algorithm it's required to set the number of votes per node to 1
(default) and the qdevice number of votes has to be also 1. This is achieved by
setting quorum.device.votes key in corosync.conf file to 1.
lms Last-man-standing. If the node is the only one left in the cluster that can see the
qnetd server then we return a vote.
If more than one node can see the qnetd server but some nodes can't see each other
then the cluster is divided up into 'partitions' based on their ring_id and this
algorithm returns a vote to the partition with highest heuristics score (computed
the same way as for the ffsplit algorithm), or if there is more than 1 partition
with equal scores, the largest active partition or, if there is more than 1 equal
partition, the partition that contains the tie_breaker node (lowest, highest, etc).
For LMS to work, the number of qdevice votes has to be set to default (so just
delete quorum.device.votes key from corosync.conf).
ADVANCED SETTINGS
Set by using -S option. The default value is shown in parentheses) Options beginning with
net_ prefix are specific to model net.
lock_file
Lock file location. (/var/run/corosync-qdevice/corosync-qdevice.pid)
local_socket_file
Internal IPC socket file location. (/var/run/corosync-qdevice/corosync-
qdevice.sock)
local_socket_backlog
Parameter passed to listen syscall. (10)
max_cs_try_again
How many times to retry the call to a corosync function which has returned
CS_ERR_TRY_AGAIN. (10)
votequorum_device_name
Name used for qdevice registration. (Qdevice)
ipc_max_clients
Maximum allowed simultaneous IPC clients. (10)
ipc_max_receive_size
Maximum size of a message received by IPC client. (4096)
ipc_max_send_size
Maximum size of a message allowed to be sent to an IPC client. (65536)
master_wins
Force enable/disable master wins. (default is model)
heuristics_ipc_max_send_buffers
Maximum number of heuristics worker send buffers. (128)
heuristics_ipc_max_send_receive_size
Maximum size of a message allowed to be send to, or received from heuristics
worker. (4096)
heuristics_min_timeout
Minimum heuristics timeout accepted by client in ms. (1000)
heuristics_max_timeout
Maximum heuristics timeout accepted by client in ms. (120000)
heuristics_min_interval
Minimum heuristics interval accepted by client in ms. (1000)
heuristics_max_interval
Maximum heuristics interval accepted by client in ms. (3600000)
heuristics_max_execs
Maximum number of exec_ commands. (32)
heuristics_use_execvp
Use execvp instead of execv for executing commands. (off)
heuristics_max_processes
Maximum number of processes running at one time. (160)
heuristics_kill_list_interval
Interval between status is gathered and eventually signal is sent to processes
which didn't finished on time in ms. (5000)
net_nss_db_dir
NSS database directory. (/etc/corosync/qdevice/net/nssdb)
net_initial_msg_receive_size
Initial (used during connection parameters negotiation) maximum size of the receive
buffer for message (maximum allowed message size received from qnetd). (32768)
net_initial_msg_send_size
Initial (used during connection parameter negotiation) maximum size of one send
buffer (message) to be sent to server. (32768)
net_min_msg_send_size
Minimum required size of one send buffer (message) to be sent to server. (32768)
net_max_msg_receive_size
Maximum allowed size of receive buffer for a message sent by server. (16777216)
net_max_send_buffers
Maximum number of send buffers. (10)
net_nss_qnetd_cn
Canonical name of qnetd server certificate. (Qnetd Server)
net_nss_client_cert_nickname
NSS nickname of qdevice client certificate. (Cluster Cert)
net_heartbeat_interval_min
Minimum heartbeat timeout accepted by client in ms. (1000)
net_heartbeat_interval_max
Maximum heartbeat timeout accepted by client in ms. (120000)
net_min_connect_timeout
Minimum connection timeout accepted by client in ms. (1000)
net_max_connect_timeout
Maximum connection timeout accepted by client in ms. (120000)
net_test_algorithm_enabled
Enable test algorithm. (if built with --enable-debug on, otherwise off)
EXAMPLE
Define qdevice with net model connecting to qnetd running on qnetd.example.org host, using
ffsplit algorithm. Heuristics is set to sync mode and executes two commands.
quorum {
provider: corosync_votequorum
device {
votes: 1
model: net
net {
tls: on
host: qnetd.example.org
algorithm: ffsplit
}
heuristics {
mode: sync
exec_ping: /bin/ping -q -c 1 "www.example.org"
exec_test_txt_exists: /usr/bin/test -f /tmp/test.txt
}
}
SEE ALSO
corosync-qdevice-tool(8) corosync-qdevice-net-certutil(8) corosync-qnetd(8)
corosync.conf(5) votequorum_qdevice_poll(3)
AUTHOR
Jan Friesse
2020-10-27 COROSYNC-QDEVICE(8)