Provided by: gdisk_1.0.10-2_amd64 
NAME
gdisk - Interactive GUID partition table (GPT) manipulator
SYNOPSIS
gdisk [ -l ] device
DESCRIPTION
GPT fdisk (aka gdisk) is a text-mode menu-driven program for creation and manipulation of
partition tables. It will automatically convert an old-style Master Boot Record (MBR)
partition table or BSD disklabel stored without an MBR carrier partition to the newer
Globally Unique Identifier (GUID) Partition Table (GPT) format, or will load a GUID
partition table. When used with the -l command-line option, the program displays the
current partition table and then exits.
GPT fdisk operates mainly on the GPT headers and partition tables; however, it can and
will generate a fresh protective MBR, when required. (Any boot loader code in the
protective MBR will not be disturbed.) If you've created an unusual protective MBR, such
as a hybrid MBR created by gptsync or gdisk's own hybrid MBR creation feature, this should
not be disturbed by most ordinary actions. Some advanced data recovery options require you
to understand the distinctions between the main and backup data, as well as between the
GPT headers and the partition tables. For information on MBR vs. GPT, as well as GPT
terminology and structure, see the extended gdisk documentation at
https://www.rodsbooks.com/gdisk/ or consult Wikipedia.
The gdisk program employs a user interface similar to that of Linux's fdisk, but gdisk
modifies GPT partitions. It also has the capability of transforming MBR partitions or BSD
disklabels into GPT partitions. Like the original fdisk program, gdisk does not modify
disk structures until you explicitly write them to disk, so if you make a mistake, you can
exit from the program with the 'q' option to leave your partitions unmodified.
Ordinarily, gdisk operates on disk device files, such as /dev/sda or /dev/hda under Linux,
/dev/disk0 under Mac OS X, or /dev/ad0 or /dev/da0 under FreeBSD. The program can also
operate on disk image files, which can be either copies of whole disks (made with dd, for
instance) or raw disk images used by emulators such as QEMU or VMWare. Note that only raw
disk images are supported; gdisk cannot work on compressed or other advanced disk image
formats.
The MBR partitioning system uses a combination of cylinder/head/sector (CHS) addressing
and logical block addressing (LBA). The former is klunky and limiting. GPT drops CHS
addressing and uses 64-bit LBA mode exclusively. Thus, GPT data structures, and therefore
gdisk, do not need to deal with CHS geometries and all the problems they create. Users of
fdisk will note that gdisk lacks the options and limitations associated with CHS
geometries.
For best results, you should use an OS-specific partition table program whenever possible.
For example, you should make Mac OS X partitions with the Mac OS X Disk Utility program
and Linux partitions with the Linux gdisk or GNU Parted program.
Upon start, gdisk attempts to identify the partition type in use on the disk. If it finds
valid GPT data, gdisk will use it. If gdisk finds a valid MBR or BSD disklabel but no GPT
data, it will attempt to convert the MBR or disklabel into GPT form. (BSD disklabels are
likely to have unusable first and/or final partitions because they overlap with the GPT
data structures, though.) GPT fdisk can identify, but not use data in, Apple Partition Map
(APM) disks, which are used on 680x0- and PowerPC-based Macintoshes. Upon exiting with the
'w' option, gdisk replaces the MBR or disklabel with a GPT. This action is potentially
dangerous! Your system may become unbootable, and partition type codes may become
corrupted if the disk uses unrecognized type codes. Boot problems are particularly likely
if you're multi-booting with any GPT-unaware OS. If you mistakenly launch gdisk on an MBR
disk, you can safely exit the program without making any changes by using the 'q' option.
The MBR-to-GPT conversion will leave at least one gap in the partition numbering if the
original MBR used logical partitions. These gaps are harmless, but you can eliminate them
by using the 's' option, if you like. (Doing this may require you to update your
/etc/fstab file.)
When creating a fresh partition table, certain considerations may be in order:
* For data (non-boot) disks, and for boot disks used on BIOS-based computers with
GRUB as the boot loader, partitions may be created in whatever order and in
whatever sizes are desired.
* Boot disks for EFI-based systems require an EFI System Partition (gdisk internal
code 0xEF00) formatted as FAT-32. I recommended making this partition 550 MiB.
(Smaller ESPs are common, but some EFIs have flaky FAT drivers that necessitate a
larger partition for reliable operation.) Boot-related files are stored here. (Note
that GNU Parted identifies such partitions as having the "boot flag" set.)
* Some boot loaders for BIOS-based systems make use of a BIOS Boot Partition (gdisk
internal code 0xEF02), in which the secondary boot loader is stored, possibly
without the benefit of a filesystem. (GRUB2 may optionally use such a partition.)
This partition can typically be quite small (roughly 32 to 200 KiB, although 1 MiB
is more common in practice), but you should consult your boot loader documentation
for details.
* If Windows is to boot from a GPT disk, a partition of type Microsoft Reserved
(gdisk internal code 0x0C01) is recommended. This partition should be about 128 MiB
in size. It ordinarily follows the EFI System Partition and immediately precedes
the Windows data partitions. (Note that old versions of GNU Parted create all FAT
partitions as this type, which actually makes the partition unusable for normal
file storage in both Windows and Mac OS X.)
* Some OSes' GPT utilities create some blank space (typically 128 MiB) after each
partition. The intent is to enable future disk utilities to use this space. Such
free space is not required of GPT disks, but creating it may help in future disk
maintenance. You can use GPT fdisk's relative partition positioning option
(specifying the starting sector as '+128M', for instance) to simplify creating such
gaps.
OPTIONS
-l List the partition table for the specified device and then exits.
Most interactions with gdisk occur with its interactive text-mode menus. Three menus
exist: the main menu, the recovery & transformation menu, and the experts' menu. The main
menu provides the functions that are most likely to be useful for typical partitioning
tasks, such as creating and deleting partitions, changing partition type codes, and so on.
Specific functions are:
b Save partition data to a backup file. You can back up your current in-memory
partition table to a disk file using this option. The resulting file is a binary
file consisting of the protective MBR, the main GPT header, the backup GPT header,
and one copy of the partition table, in that order. Note that the backup is of the
current in-memory data structures, so if you launch the program, make changes, and
then use this option, the backup will reflect your changes. Note also that the
restore option is on the recovery & transformation menu; the backup option is on
the main menu to encourage its use.
c Change the GPT name of a partition. This name is encoded as a UTF-16 string, but
proper entry and display of anything beyond basic ASCII values requires suitable
locale and font support. For the most part, Linux ignores the partition name, but
it may be important in some OSes. GPT fdisk sets a default name based on the
partition type code. Note that the GPT partition name is different from the
filesystem name, which is encoded in the filesystem's data structures.
d Delete a partition. This action deletes the entry from the partition table but does
not disturb the data within the sectors originally allocated to the partition on
the disk. If a corresponding hybrid MBR partition exists, gdisk deletes it, as
well, and expands any adjacent 0xEE (EFI GPT) MBR protective partition to fill the
new free space.
i Show detailed partition information. The summary information produced by the 'p'
command necessarily omits many details, such as the partition's unique GUID and the
translation of gdisk's internal partition type code to a plain type name. The 'i'
option displays this information for a single partition.
l Display a summary of partition types. GPT uses a GUID to identify partition types
for particular OSes and purposes. For ease of data entry, gdisk compresses these
into two-byte (four-digit hexadecimal) values that are related to their equivalent
MBR codes. Specifically, the MBR code is multiplied by hexadecimal 0x0100. For
instance, the code for Linux swap space in MBR is 0x82, and it's 0x8200 in gdisk. A
one-to-one correspondence is impossible, though. Most notably, the codes for all
varieties of FAT and NTFS partition correspond to a single GPT code (entered as
0x0700 in gdisk). Some OSes use a single MBR code but employ many more codes in
GPT. For these, gdisk adds code numbers sequentially, such as 0xa500 for a FreeBSD
disklabel, 0xa501 for FreeBSD boot, 0xa502 for FreeBSD swap, and so on. Note that
these two-byte codes are unique to gdisk. The type code list may optionally be
filtered by a search string; for instance, entering linux shows only partition type
codes with descriptions that include the string Linux. This search is performed
case-insensitively.
n Create a new partition. This command is modeled after the equivalent fdisk option,
although some differences exist. You enter a partition number, starting sector, and
an ending sector. Both start and end sectors can be specified in absolute terms as
sector numbers or as positions measured in kibibytes (K), mebibytes (M), gibibytes
(G), tebibytes (T), or pebibytes (P); for instance, 40M specifies a position 40MiB
from the start of the disk. You can specify locations relative to the start or end
of the specified default range by preceding the number by a '+' or '-' symbol, as
in +2G to specify a point 2GiB after the default start sector, or -200M to specify
a point 200MiB before the last available sector. Pressing the Enter key with no
input specifies the default value, which is the start of the largest available
block for the start sector and the end of the same block for the end sector.
Default start and end points may be adjusted to optimize partition alignment.
o Clear out all partition data. This includes GPT header data, all partition
definitions, and the protective MBR. The sector alignment is reset to the default
(1 MiB, or 2048 sectors on a disk with 512-byte sectors).
p Display basic partition summary data. This includes partition numbers, starting and
ending sector numbers, partition sizes, gdisk's partition types codes, and
partition names. For additional information, use the 'i' command.
q Quit from the program without saving your changes. Use this option if you just
wanted to view information or if you make a mistake and want to back out of all
your changes.
r Enter the recovery & transformation menu. This menu includes emergency recovery
options (to fix damaged GPT data structures) and options to transform to or from
other partitioning systems, including creating hybrid MBRs.
s Sort partition entries. GPT partition numbers need not match the order of
partitions on the disk. If you want them to match, you can use this option. Note
that some partitioning utilities sort partitions whenever they make changes. Such
changes will be reflected in your device filenames, so you may need to edit
/etc/fstab if you use this option.
t Change a single partition's type code. You enter the type code using a two-byte
hexadecimal number, as described earlier. You may also enter a GUID directly, if
you have one and gdisk doesn't know it.
v Verify disk. This option checks for a variety of problems, such as incorrect CRCs
and mismatched main and backup data. This option does not automatically correct
most problems, though; for that, you must use options on the recovery &
transformation menu. If no problems are found, this command displays a summary of
unallocated disk space.
w Write data. Use this command to save your changes.
x Enter the experts' menu. Using this option provides access to features you can use
to get into even more trouble than the main menu allows.
? Print the menu. Type this command (or any other unrecognized command) to see a
summary of available options.
The second gdisk menu is the recovery & transformation menu, which provides access to data
recovery options and features related to the transformation of partitions between
partitioning schemes (converting BSD disklabels into GPT partitions or creating hybrid
MBRs, for instance). A few options on this menu duplicate functionality on the main menu,
for the sake of convenience. The options on this menu are:
b Rebuild GPT header from backup. You can use the backup GPT header to rebuild the
main GPT header with this option. It's likely to be useful if your main GPT header
was damaged or destroyed (say, by sloppy use of dd).
c Load backup partition table. Ordinarily, gdisk uses only the main partition table
(although the backup's integrity is checked when you launch the program). If the
main partition table has been damaged, you can use this option to load the backup
from disk and use it instead. Note that this will almost certainly produce no or
strange partition entries if you've just converted an MBR disk to GPT format, since
there will be no backup partition table on disk.
d Use main GPT header and rebuild the backup. This option is likely to be useful if
the backup GPT header has been damaged or destroyed.
e Load main partition table. This option reloads the main partition table from disk.
It's only likely to be useful if you've tried to use the backup partition table
(via 'c') but it's in worse shape then the main partition table.
f Load MBR and build fresh GPT from it. Use this option if your GPT is corrupt or
conflicts with the MBR and you want to use the MBR as the basis for a new set of
GPT partitions.
g Convert GPT into MBR and exit. This option converts as many partitions as possible
into MBR form, destroys the GPT data structures, saves the new MBR, and exits. Use
this option if you've tried GPT and find that MBR works better for you. Note that
this function generates up to four primary MBR partitions or three primary
partitions and as many logical partitions as can be generated. Each logical
partition requires at least one unallocated block immediately before its first
block. Therefore, it may be possible to convert a maximum of four partitions on
disks with tightly-packed partitions; however, if free space was inserted between
partitions when they were created, and if the disk is under 2 TiB in size, it
should be possible to convert all the partitions to MBR form. See also the 'h'
option.
h Create a hybrid MBR. This is an ugly workaround that enables GPT-unaware OSes, or
those that can't boot from a GPT disk, to access up to three of the partitions on
the disk by creating MBR entries for them. Note that these hybrid MBR entries can
easily go out of sync with the GPT entries, particularly when hybrid-unaware GPT
utilities are used to edit the disk. Thus, you may need to re-create the hybrid
MBR if you use such tools. Unlike the 'g' option, this option does not support
converting any partitions into MBR logical partitions.
i Show detailed partition information. This option is identical to the 'i' option on
the main menu.
l Load partition data from a backup file. This option is the reverse of the 'b'
option on the main menu. Note that restoring partition data from anything but the
original disk is not recommended.
m Return to the main menu. This option enables you to enter main-menu commands.
o Print protective MBR data. You can see a summary of the protective MBR's partitions
with this option. This may enable you to spot glaring problems or help identify the
partitions in a hybrid MBR.
p Print the partition table. This option is identical to the 'p' option in the main
menu.
q Quit without saving changes. This option is identical to the 'q' option in the main
menu.
t Transform BSD partitions into GPT partitions. This option works on BSD disklabels
held within GPT (or converted MBR) partitions. Converted partitions' type codes are
likely to need manual adjustment. gdisk will attempt to convert BSD disklabels
stored on the main disk when launched, but this conversion is likely to produce
first and/or last partitions that are unusable. The many BSD variants means that
the probability of gdisk being unable to convert a BSD disklabel is high compared
to the likelihood of problems with an MBR conversion.
v Verify disk. This option is identical to the 'v' option in the main menu.
w Write table to disk and exit. This option is identical to the 'w' option in the
main menu.
x Enter the experts' menu. This option is identical to the 'x' option in the main
menu.
? Print the menu. This option (or any unrecognized entry) displays a summary of the
menu options.
The third gdisk menu is the experts' menu. This menu provides advanced options that aren't
closely related to recovery or transformation between partitioning systems. Its options
are:
a Set attributes. GPT provides a 64-bit attributes field that can be used to set
features for each partition. gdisk supports four attributes: system partition,
read-only, hidden, and do not automount. You can set other attributes, but their
numbers aren't translated into anything useful. In practice, most OSes seem to
ignore these attributes.
b Swap the byte order for the name of the specified partition. Some partitioning
tools, including GPT fdisk 1.0.7 and earlier, can write the partition name in the
wrong byte order on big-endian computers, such as the IBM s390 mainframes and
PowerPC-based Macs. This feature corrects this problem.
c Change partition GUID. You can enter a custom unique GUID for a partition using
this option. (Note this refers to the GUID that uniquely identifies a partition,
not to its type code, which you can change with the 't' main-menu option.)
Ordinarily, gdisk assigns this number randomly; however, you might want to adjust
the number manually if you've wound up with the same GUID on two partitions because
of buggy GUID assignments (hopefully not in gdisk) or sheer incredible coincidence.
d Display the sector alignment value. See the description of the 'l' option for more
details.
e Move backup GPT data structures to the end of the disk. Use this command if you've
added disks to a RAID array, thus creating a virtual disk with space that follows
the backup GPT data structures. This command moves the backup GPT data structures
to the end of the disk, where they belong.
f Randomize the disk's GUID and all partitions' unique GUIDs (but not their partition
type code GUIDs). This function may be used after cloning a disk with another
utility in order to render all GUIDs once again unique.
g Change disk GUID. Each disk has a unique GUID code, which gdisk assigns randomly
upon creation of the GPT data structures. You can generate a fresh random GUID or
enter one manually with this option.
h Recompute CHS values in protective or hybrid MBR. This option can sometimes help if
a disk utility, OS, or BIOS doesn't like the CHS values used by the partitions in
the protective or hybrid MBR. In particular, the GPT specification requires a CHS
value of 0xFFFFFF for over-8GiB partitions, but this value is technically illegal
by the usual standards. Some BIOSes hang if they encounter this value. This option
will recompute a more normal CHS value -- 0xFEFFFF for over-8GiB partitions,
enabling these BIOSes to boot.
i Show detailed partition information. This option is identical to the 'i' option on
the main menu.
j Adjust the location of the main partition table. This value is normally 2, but it
may need to be increased in some cases, such as when a system-on-chip (SoC) is
hard-coded to read boot code from sector 2. I recommend against adjusting this
value unless doing so is absolutely necessary.
k Adjust the location of the backup partition table. This partition table is normally
located just before the backup metadata at the end of the disk, but it may need to
be moved in some very rare cases. I recommend against adjusting this value unless
doing so is absolutely necessary.
l Change the sector alignment value. Disks with more logical sectors per physical
sectors (such as modern Advanced Format drives), some RAID configurations, and many
SSD devices, can suffer performance problems if partitions are not aligned properly
for their internal data structures. On new disks, GPT fdisk attempts to align
partitions on 1 MiB boundaries (2048 sectors on disks with 512-byte sectors) by
default, which optimizes performance for all of these disk types. On
pre-partitioned disks, GPT fdisk attempts to identify the alignment value used on
that disk, but will set 8-sector alignment on disks larger than 300 GB even if
lesser alignment values are detected. In either case, it can be changed by using
this option. The alignment value also affects the default end sector value when
creating a new partition; it will be aligned to one less than a multiple of the
alignment value, if possible. This should keep partitions a multiple of the
alignment value in size. Some disk encryption tools require partitions to be sized
to some value, typically 4096 bytes, so the default alignment of 1 MiB works well
for them.
m Return to the main menu. This option enables you to enter main-menu commands.
n Create a new protective MBR. Use this option if the current protective MBR is
damaged in a way that gdisk doesn't automatically detect and correct, or if you
want to convert a hybrid MBR into a "pure" GPT with a conventional protective MBR.
o Print protective MBR data. You can see a summary of the protective MBR's partitions
with this option. This may enable you to spot glaring problems or help identify the
partitions in a hybrid MBR.
p Print the partition table. This option is identical to the 'p' option in the main
menu.
q Quit without saving changes. This option is identical to the 'q' option in the main
menu.
r Enter the recovery & transformations menu. This option is identical to the 'r'
option on the main menu.
s Resize partition table. The default partition table size is 128 entries.
Officially, sizes of less than 16KB (128 entries, given the normal entry size) are
unsupported by the GPT specification; however, in practice they seem to work, and
can sometimes be useful in converting MBR disks. Larger sizes also work fine. OSes
may impose their own limits on the number of partitions, though.
t Swap two partitions' entries in the partition table. One partition may be empty.
For instance, if partitions 1-4 are defined, transposing 1 and 5 results in a table
with partitions numbered from 2-5. Transposing partitions in this way has no effect
on their disk space allocation; it only alters their order in the partition table.
u Replicate the current device's partition table on another device. You will be
prompted to type the new device's filename. After the write operation completes,
you can continue editing the original device's partition table. Note that the
replicated partition table is an exact copy, including all GUIDs; if the device
should have its own unique GUIDs, you should use the f option on the new disk.
v Verify disk. This option is identical to the 'v' option in the main menu.
z Zap (destroy) the GPT data structures and exit. Use this option if you want to
repartition a GPT disk using fdisk or some other GPT-unaware program. You'll be
given the choice of preserving the existing MBR, in case it's a hybrid MBR with
salvageable partitions or if you've already created new MBR partitions and want to
erase the remnants of your GPT partitions. If you've already created new MBR
partitions, it's conceivable that this option will damage the first and/or last MBR
partitions! Such an event is unlikely, but could occur if your new MBR partitions
overlap the old GPT data structures.
? Print the menu. This option (or any unrecognized entry) displays a summary of the
menu options.
In many cases, you can press the Enter key to select a default option when entering data.
When only one option is possible, gdisk usually bypasses the prompt entirely.
BUGS
Known bugs and limitations include:
* The program compiles correctly only on Linux, FreeBSD, Mac OS X, and Windows.
Linux versions for x86-64 (64-bit), x86 (32-bit), and PowerPC (32-bit) have been
tested, with the x86-64 version having seen the most testing. Under FreeBSD, 32-bit
(x86) and 64-bit (x86-64) versions have been tested. Only 32-bit versions for Mac
OS X and Windows have been tested by the author, although I've heard of 64-bit
versions being successfully compiled.
* The FreeBSD version of the program can't write changes to the partition table to a
disk when existing partitions on that disk are mounted. (The same problem exists
with many other FreeBSD utilities, such as gpt, fdisk, and dd.) This limitation can
be overcome by typing sysctl kern.geom.debugflags=16 at a shell prompt.
* The fields used to display the start and end sector numbers for partitions in the
'p' command are 14 characters wide. This translates to a limitation of about 45
PiB. On larger disks, the displayed columns will go out of alignment.
* In the Windows version, only ASCII characters are supported in the partition name
field. If an existing partition uses non-ASCII UTF-16 characters, they're likely to
be corrupted in the 'i' and 'p' menu options' displays; however, they should be
preserved when loading and saving partitions. Binaries for Linux, FreeBSD, and OS X
support full UTF-16 partition names.
* The program can load only up to 128 partitions (4 primary partitions and 124
logical partitions) when converting from MBR format. This limit can be raised by
changing the #define MAX_MBR_PARTS line in the basicmbr.h source code file and
recompiling; however, such a change will require using a larger-than-normal
partition table. (The limit of 128 partitions was chosen because that number equals
the 128 partitions supported by the most common partition table size.)
* Converting from MBR format sometimes fails because of insufficient space at the
start or (more commonly) the end of the disk. Resizing the partition table (using
the 's' option in the experts' menu) can sometimes overcome this problem; however,
in extreme cases it may be necessary to resize a partition using GNU Parted or a
similar tool prior to conversion with gdisk.
* MBR conversions work only if the disk has correct LBA partition descriptors. These
descriptors should be present on any disk over 8 GiB in size or on smaller disks
partitioned with any but very ancient software.
* BSD disklabel support can create first and/or last partitions that overlap with the
GPT data structures. This can sometimes be compensated by adjusting the partition
table size, but in extreme cases the affected partition(s) may need to be deleted.
* Because of the highly variable nature of BSD disklabel structures, conversions from
this form may be unreliable -- partitions may be dropped, converted in a way that
creates overlaps with other partitions, or converted with incorrect start or end
values. Use this feature with caution!
* Booting after converting an MBR or BSD disklabel disk is likely to be disrupted.
Sometimes re-installing a boot loader will fix the problem, but other times you may
need to switch boot loaders. Except on EFI-based platforms, Windows through at
least Windows 7 doesn't support booting from GPT disks. Creating a hybrid MBR
(using the 'h' option on the recovery & transformation menu) or abandoning GPT in
favor of MBR may be your only options in this case.
AUTHORS
Primary author: Roderick W. Smith (rodsmith@rodsbooks.com)
Contributors:
* Yves Blusseau (1otnwmz02@sneakemail.com)
* David Hubbard (david.c.hubbard@gmail.com)
* Justin Maggard (justin.maggard@netgear.com)
* Dwight Schauer (das@teegra.net)
* Florian Zumbiehl (florz@florz.de)
SEE ALSO
cfdisk(8), cgdisk(8), fdisk(8), mkfs(8), parted(8), sfdisk(8), sgdisk(8), fixparts(8).
https://en.wikipedia.org/wiki/GUID_Partition_Table
https://developer.apple.com/technotes/tn2006/tn2166.html
https://www.rodsbooks.com/gdisk/
AVAILABILITY
The gdisk command is part of the GPT fdisk package and is available from Rod Smith.