Ubuntu Manpage: kernel-install - Add and remove kernel and initrd images to and from the boot partition

Provided by: systemd_256.5-2ubuntu4_amd64

NAME

       kernel-install - Add and remove kernel and initrd images to and from the boot partition

SYNOPSIS

       kernel-install [OPTIONS...] add KERNEL-VERSION KERNEL-IMAGE [INITRD-FILE...]

       kernel-install [OPTIONS...] add-all

       kernel-install [OPTIONS...] remove KERNEL-VERSION

       kernel-install [OPTIONS...] inspect [KERNEL-VERSION] [KERNEL-IMAGE] [INITRD-FILE...]

       kernel-install [OPTIONS...] list

DESCRIPTION

       kernel-install is used to install and remove kernel and initrd images [1] to and from the
       boot partition, referred to as $BOOT here. It will usually be one of /boot/, /efi/, or
       /boot/efi/, see below.

       kernel-install will run the executable files ("plugins") located in the directory
       /usr/lib/kernel/install.d/ and the local administration directory /etc/kernel/install.d/.
       All files are collectively sorted and executed in lexical order, regardless of the
       directory in which they live. However, files with identical filenames replace each other.
       Files in /etc/kernel/install.d/ take precedence over files with the same name in
       /usr/lib/kernel/install.d/. This can be used to override a system-supplied executables
       with a local file if needed; a symbolic link in /etc/kernel/install.d/ with the same name
       as an executable in /usr/lib/kernel/install.d/, pointing to /dev/null, disables the
       executable entirely. Executables must have the extension ".install"; other extensions are
       ignored.

       An executable placed in these directories should return 0 on success. It may also return
       77 to cause the whole operation to terminate (executables later in lexical order will be
       skipped).

COMMANDS

The following commands are understood:

add [[[KERNEL-VERSION] KERNEL-IMAGE] [INITRD-FILE ...]]
This command takes a kernel version string and a path to a kernel image file as
arguments. If the former is omitted, specified as an empty string or as "-" it
defaults to the current kernel version, i.e. the same string uname -r returns. If the
latter is omitted, specified as an empty string or as "-" defaults to
/usr/lib/modules/KERNEL_VERSION/vmlinuz. Optionally, one or more initrd images may be
specified as well (note that plugins might generate additional ones).

The executable files from /usr/lib/kernel/install.d/*.install and
/etc/kernel/install.d/*.install (i.e. the plugins) are called with the following
arguments:

add KERNEL-VERSION $BOOT/ENTRY-TOKEN/KERNEL-VERSION/ KERNEL-IMAGE \
[INITRD-FILE ...]

The third argument directly refers to the path where to place kernel images, initrd
images and other resources for Boot Loader Specification[2] Type #1 entries (the
"entry directory"). If other boot loader schemes are used the parameter may be
ignored.

The ENTRY-TOKEN string is typically the machine ID and is supposed to identify the
local installation on the system. For details see below.

Two default plugins execute the following operations in this case:

• kernel-install creates $BOOT/ENTRY-TOKEN/KERNEL-VERSION, if enabled (see
$KERNEL_INSTALL_LAYOUT).

• 50-depmod.install runs depmod(8) for the KERNEL-VERSION.

• 90-loaderentry.install copies KERNEL-IMAGE to
$BOOT/ENTRY-TOKEN/KERNEL-VERSION/linux. If INITRD-FILEs are provided, it also
copies them to $BOOT/ENTRY-TOKEN/KERNEL_VERSION/INITRD-FILE. This can also be used
to prepend microcode before the actual initrd. It also creates a boot loader entry
according to the Boot Loader Specification[2] (Type #1) in
$BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION.conf. The title of the entry is
the PRETTY_NAME parameter specified in /etc/os-release or /usr/lib/os-release (if
the former is missing), or "Linux KERNEL-VERSION", if unset.

If $KERNEL_INSTALL_LAYOUT is not "bls", this plugin does nothing.

• 90-uki-copy.install copies a file uki.efi from $KERNEL_INSTALL_STAGING_AREA or if
it does not exist the KERNEL-IMAGE argument, only if it has a ".efi" extension, to
$BOOT/EFI/Linux/ENTRY-TOKEN-KERNEL-VERSION.efi.

If $KERNEL_INSTALL_LAYOUT is not "uki", this plugin does nothing.

Added in version 198.

add-all
This is the same as add (see above), but invokes the operation iteratively for every
installed kernel in /usr/lib/modules/. This operation is only supported on systems
where the kernel image is installed in /usr/lib/modules/KERNEL-VERSION/vmlinuz.

Added in version 255.

remove KERNEL-VERSION
This command expects a kernel version string as single argument.

The executable files from /usr/lib/kernel/install.d/*.install and
/etc/kernel/install.d/*.install (i.e. the plugins) are called with the following
arguments:

remove KERNEL-VERSION $BOOT/ENTRY-TOKEN/KERNEL-VERSION/

Afterwards, kernel-install removes the entry directory
$BOOT/ENTRY-TOKEN/KERNEL-VERSION/ and its contents, if it exists.

Two default plugins execute the following operations in this case:

• 50-depmod.install removes the files generated by depmod for this kernel again.

• 90-loaderentry.install removes the file
$BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION.conf.

• 90-uki-copy.install removes the file
$BOOT/EFI/Linux/ENTRY-TOKEN-KERNEL-VERSION.efi.

Added in version 198.

inspect [[[KERNEL-VERSION] KERNEL-IMAGE] [INITRD-FILE ...]]
Takes the same parameters as add.

Shows the various paths and parameters configured or auto-detected. In particular
shows the values of the various $KERNEL_INSTALL_* environment variables listed below,
as they would be passed to plugins. The --json option can be used to get the output of
this verb as a JSON object.

Added in version 251.

list
Shows the various installed kernels. This enumerates the subdirectories of
/usr/lib/modules/, and shows whether a kernel image is installed there.

Added in version 255.

COMPATIBILITY WITH THE KERNEL BUILD SYSTEM

       installkernel [OPTIONS...] VERSION VMLINUZ [MAP] [INSTALLATION-DIR]

       When invoked as installkernel, this program accepts arguments as specified by the kernel
       build system's make install command. The VERSION and VMLINUZ parameters specify the kernel
       version and the kernel binary. The other two parameters (MAP and INSTALLATION-DIR) are
       currently ignored.

THE $BOOT PARTITION

       The partition where the kernels and Boot Loader Specification[2] snippets are located is
       called $BOOT.  kernel-install determines the location of this partition by checking /efi/,
       /boot/, and /boot/efi/ in turn. The first location where $BOOT/loader/entries/ or
       $BOOT/ENTRY-TOKEN/ exists is used.

OPTIONS

The following options are understood:

--esp-path=
Path to the EFI System Partition (ESP). If not specified, /efi/, /boot/, and
/boot/efi/ are checked in turn. It is recommended to mount the ESP to /efi/, if
possible.

--boot-path=
Path to the Extended Boot Loader partition, as defined in the Boot Loader
Specification[2]. If not specified, /boot/ is checked. It is recommended to mount the
Extended Boot Loader partition to /boot/, if possible.

--make-entry-directory=yes|no|auto
Controls creation and deletion of the Boot Loader Specification[2] Type #1 entry
directory on the file system containing resources such as kernel and initrd images
during add and remove, respectively. The directory is named after the entry token, and
is placed immediately below the boot root directory. When "auto", the directory is
created or removed only when the install layout is "bls". Defaults to "auto".

Added in version 254.

--entry-token=
Controls how to name and identify boot loader entries for this kernel installation or
deletion. Takes one of "auto", "machine-id", "os-id", "os-image-id", or an arbitrary
string prefixed by "literal:" as argument.

If set to machine-id the entries are named after the machine ID of the running system
(e.g. "b0e793a9baf14b5fa13ecbe84ff637ac"). See machine-id(5) for details about the
machine ID concept and file.

If set to os-id the entries are named after the OS ID of the running system, i.e. the
ID= field of os-release(5) (e.g. "fedora"). Similarly, if set to os-image-id the
entries are named after the OS image ID of the running system, i.e. the IMAGE_ID=
field of os-release (e.g. "vendorx-cashier-system").

If set to auto (the default), the /etc/kernel/entry-token (or
$KERNEL_INSTALL_CONF_ROOT/entry-token) file will be read if it exists, and the stored
value used. Otherwise if the local machine ID is initialized it is used. Otherwise
IMAGE_ID= from os-release will be used, if set. Otherwise, ID= from os-release will be
used, if set. Otherwise a randomly generated machine ID is used.

Using the machine ID for naming the entries is generally preferable, however there are
cases where using the other identifiers is a good option. Specifically: if the
identification data that the machine ID entails shall not be stored on the
(unencrypted) $BOOT_ROOT partition, or if the ID shall be generated on first boot and
is not known when the entries are prepared. Note that using the machine ID has the
benefit that multiple parallel installations of the same OS can coexist on the same
medium, and they can update their boot loader entries independently. When using
another identifier (such as the OS ID or the OS image ID), parallel installations of
the same OS would try to use the same entry name. To support parallel installations,
the installer must use a different entry token when adding a second installation.

Added in version 254.

-v, --verbose
Output additional information about operations being performed.

Added in version 242.

--root=root
Takes a directory path as an argument. All paths will be prefixed with the given
alternate root path, including config search paths. This is useful to operate on a
system image mounted to the specified directory instead of the host system itself.

Added in version 255.

--image=image
Takes a path to a disk image file or block device node. If specified, all operations
are applied to the file system in the indicated disk image. This option is similar to
--root=, but operates on file systems stored in disk images or block devices. The disk
image should either contain just a file system or a set of file systems within a GPT
partition table, following the Discoverable Partitions Specification[3]. For further
information on supported disk images, see systemd-nspawn(1)'s switch of the same name.

Added in version 255.

-h, --help
Print a short help text and exit.

--version
Print a short version string and exit.

--no-pager
Do not pipe output into a pager.

--json=MODE
Shows output formatted as JSON. Expects one of "short" (for the shortest possible
output without any redundant whitespace or line breaks), "pretty" (for a pretty
version of the same, with indentation and line breaks) or "off" (to turn off JSON
output, the default).

--image-policy=policy
Takes an image policy string as argument, as per systemd.image-policy(7). The policy
is enforced when operating on the disk image specified via --image=, see above. If not
specified defaults to the "*" policy, i.e. all recognized file systems in the image
are used.

--no-legend
Do not print the legend, i.e. column headers and the footer with hints.

ENVIRONMENT VARIABLES

Environment variables exported for plugins
If --verbose is used, $KERNEL_INSTALL_VERBOSE=1 will be exported for plugins. They may
output additional logs in this case.

$KERNEL_INSTALL_IMAGE_TYPE=uki|pe|unknown is set for the plugins to specify the type of
the kernel image.

uki
Unified kernel image.

Added in version 254.

pe
PE binary.

Added in version 254.

unknown
Unknown type.

Added in version 254.

$KERNEL_INSTALL_MACHINE_ID is set for the plugins to the desired machine-id to use. It's
always a 128-bit ID. Normally it's read from /etc/machine-id, but it can also be
overridden via $MACHINE_ID (see below). If not specified via these methods, a fallback
value will generated by kernel-install and used only for a single invocation.

$KERNEL_INSTALL_ENTRY_TOKEN is set for the plugins to the desired entry "token" to use.
It's an identifier that shall be used to identify the local installation, and is often the
machine ID, i.e. same as $KERNEL_INSTALL_MACHINE_ID, but might also be a different type of
identifier, for example a fixed string or the ID=, IMAGE_ID= values from /etc/os-release.
The string passed here will be used to name Boot Loader Specification entries, or the
directories the kernel image and initial RAM disk images are placed into.

Note that while $KERNEL_INSTALL_ENTRY_TOKEN and $KERNEL_INSTALL_MACHINE_ID are often set
to the same value, the latter is guaranteed to be a valid 32 character ID in lowercase
hexadecimals while the former can be any short string. The entry token to use is read from
/etc/kernel/entry-token, if it exists. Otherwise a few possible candidates below $BOOT are
checked for Boot Loader Specification Type 1 entry directories, and if found the entry
token is derived from that. If that is not successful, $KERNEL_INSTALL_MACHINE_ID is used
as fallback.

$KERNEL_INSTALL_BOOT_ROOT is set for the plugins to the absolute path of the root
directory (mount point, usually) of the hierarchy where boot loader entries, kernel
images, and associated resources should be placed. This usually is the path where the
XBOOTLDR partition or the ESP (EFI System Partition) are mounted, and also conceptually
referred to as $BOOT. Can be overridden by setting $BOOT_ROOT (see below).

$KERNEL_INSTALL_LAYOUT=auto|bls|uki|other|... is set for the plugins to specify the
installation layout. Additional layout names may be defined by convention. If a plugin
uses a special layout, it's encouraged to declare its own layout name and configure
layout= in install.conf upon initial installation. The following values are currently
understood:

bls
Standard Boot Loader Specification[2] Type #1 layout, compatible with systemd-boot(7):
entries in $BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION[+TRIES].conf, kernel and
initrds under $BOOT/ENTRY-TOKEN/KERNEL-VERSION/

Implemented by 90-loaderentry.install.

Added in version 250.

uki
Standard Boot Loader Specification[2] Type #2 layout, compatible with systemd-boot(7):
unified kernel images under $BOOT/EFI/Linux as
$BOOT/EFI/Linux/ENTRY-TOKEN-KERNEL-VERSION[+TRIES].efi.

Implemented by 90-uki-copy.install.

Added in version 253.

other
Some other layout not understood natively by kernel-install.

Added in version 250.

auto
Pick the layout automatically. If the kernel is a UKI set layout to uki. If not
default to bls if $BOOT/loader/entries.srel with content "type1" or $BOOT/ENTRY-TOKEN
exists, or other otherwise.

Leaving layout blank has the same effect. This is the default.

Added in version 254.

$KERNEL_INSTALL_INITRD_GENERATOR and $KERNEL_INSTALL_UKI_GENERATOR are set for plugins to
select the initrd and/or UKI generator. This may be configured as initrd_generator= and
uki_generator= in install.conf, see below.

$KERNEL_INSTALL_STAGING_AREA is set for plugins to a path to a directory. Plugins may drop
files in that directory, and they will be installed as part of the loader entry, based on
the file name and extension: Files named initrd* will be installed as INITRD-FILEs, and
files named microcode* will be prepended before INITRD-FILEs.

Environment variables understood by kernel-install
$KERNEL_INSTALL_CONF_ROOT can be set to override the location of the configuration files
read by kernel-install. When set, install.conf, entry-token, and other files will be read
from this directory only. Note that this path is relative to the host, and in particular
symlinks in this directory are resolved relative to the host, even if --root=root is used.
This means that it is generally not correct to use this variable to specify a directory
underneath root if symlinks are used there.

$KERNEL_INSTALL_PLUGINS can be set to override the list of plugins executed by
kernel-install. The argument is a whitespace-separated list of paths.
"KERNEL_INSTALL_PLUGINS=:" may be used to prevent any plugins from running.

$MACHINE_ID can be set for kernel-install to override $KERNEL_INSTALL_MACHINE_ID, the
machine ID.

$BOOT_ROOT can be set for kernel-install to override $KERNEL_INSTALL_BOOT_ROOT, the
installation location for boot entries.

The last two variables may also be set in install.conf. Variables set in the environment
take precedence over the values specified in the config file.

EXIT STATUS

       If every executable returns 0 or 77, 0 is returned, and a non-zero failure code otherwise.

FILES

/etc/kernel/install.d/*.install, /usr/lib/kernel/install.d/*.install
Drop-in files which are executed by kernel-install.

Added in version 198.

/etc/kernel/cmdline, /usr/lib/kernel/cmdline, /proc/cmdline
Specifies the kernel command line to use. The first of the files that is found will be
used. $KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see below
for details.

Added in version 198.

/etc/kernel/devicetree, /usr/lib/kernel/devicetree
Specifies the partial path to the file containing the device tree blob to install with
the kernel and use at boot. The first of the files that is found will be used.
$KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see below for
details.

The devicetree file contains a path, and this path specifies a location relative to
the kernel install tree. A set of locations is checked, including in particular
/usr/lib/modules/KERNEL_VERSION/dtb/, which is the recommended location to place the
dtb files under. For example, with "broadcom/bcm2711-rpi-4-b.dtb" in the devicetree
file, the device tree blob for the Raspberry Pi 4 Model B would be installed, and the
actual file would be /usr/lib/modules/KERNEL_VERSION/dtb/broadcom/bcm2711-rpi-4-b.dtb.

Added in version 255.

/etc/kernel/tries
Read by 90-loaderentry.install and 90-uki-copy.install. If this file exists, a numeric
value is read from it and the naming of the generated entry file or UKI is altered to
include it as $BOOT/loader/entries/ENTRY-TOKEN-KERNEL-VERSION+TRIES.conf or
$BOOT/EFI/Linux/ENTRY-TOKEN-KERNEL-VERSION+TRIES.efi, respectively. This is useful for
boot loaders such as systemd-boot(7) which implement boot attempt counting with a
counter embedded in the entry file name. $KERNEL_INSTALL_CONF_ROOT may be used to
override the search path; see below for details.

Added in version 240.

/etc/kernel/entry-token
If this file exists it is read and used as "entry token" for this system, i.e. is used
for naming Boot Loader Specification entries. See $KERNEL_INSTALL_ENTRY_TOKEN above
for details. $KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see
below for details.

Added in version 251.

/etc/machine-id
The content of this file specifies the machine identification MACHINE-ID.

Added in version 198.

/etc/os-release, /usr/lib/os-release
Read by 90-loaderentry.install. If available, PRETTY_NAME= is read from these files
and used as the title of the boot menu entry. Otherwise, "Linux KERNEL-VERSION" will
be used.

Added in version 198.

/etc/kernel/install.conf, /run/kernel/install.conf, /usr/local/lib/kernel/install.conf,
/usr/lib/kernel/install.conf, /etc/kernel/install.conf.d/*.conf,
/run/kernel/install.conf.d/*.conf, /usr/local/lib/kernel/install.conf.d/*.conf,
/usr/lib/kernel/install.conf.d/*.conf
Configuration file with options for kernel-install, as a series of KEY=VALUE
assignments, compatible with shell syntax, following the same rules as described in
os-release(5). The first of the files that is found will be used.
$KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see below for
details. Drop-in files may also be used to extend the configuration with overrides,
see systemd.unit(5).

Currently, the following keys are supported: MACHINE_ID=, BOOT_ROOT=, layout=,
initrd_generator=, uki_generator=. See the Environment variables section above for
details.

Added in version 250.

/etc/kernel/uki.conf
Ini-style configuration file for ukify(1) which is only effective when
$KERNEL_INSTALL_LAYOUT or layout= in install.conf is set to uki and
$KERNEL_INSTALL_UKI_GENERATOR or uki_generator= in install.conf is set to ukify, or is
unset. $KERNEL_INSTALL_CONF_ROOT may be used to override the search path; see below
for details.

Added in version 255.

/usr/lib/modules/KERNEL-VERSION/
Location for installed kernel modules and other kernel related resources. For each
locally installed kernel a directory named after the kernel version (uname -r) is
kept.

Added in version 255.

/usr/lib/modules/KERNEL-VERSION/vmlinuz
Location for installed kernel images. This is the recommended location for OS package
managers to install kernel images into (as applicable), from which kernel-install add
then copies it into the final boot partition.

Added in version 255.

For various cases listed above, if the $KERNEL_INSTALL_CONF_ROOT environment variable is
set, it will override the search path. The files will be loaded only from the directory
specified by the environment variable. When the variable is not set, the listed paths are
tried in turn, and the first file that exists is used.

NOTES

        1. Nowadays actually CPIO archives used as an "initramfs", rather than "initrd". See
           bootup(7) for an explanation.

        2. Boot Loader Specification
           https://uapi-group.org/specifications/specs/boot_loader_specification

        3. Discoverable Partitions Specification
           https://uapi-group.org/specifications/specs/discoverable_partitions_specification

NAME

SYNOPSIS

DESCRIPTION

COMMANDS

COMPATIBILITY WITH THE KERNEL BUILD SYSTEM

THE $BOOT PARTITION

OPTIONS

ENVIRONMENT VARIABLES

EXIT STATUS

FILES

SEE ALSO

NOTES