Ubuntu Manpage: snmpd - daemon to respond to SNMP request packets.

Provided by: snmpd_5.9.4+dfsg-1.1ubuntu5_amd64

NAME

       snmpd - daemon to respond to SNMP request packets.

SYNOPSIS

       snmpd [OPTIONS] [LISTENING ADDRESSES]

DESCRIPTION

       snmpd  is  an  SNMP  agent  which binds to a port and awaits requests from SNMP management
       software.  Upon receiving a request, it processes the request(s), collects  the  requested
       information  and/or performs the requested operation(s) and returns the information to the
       sender.

OPTIONS

-a Log the source addresses of incoming requests.

-A Append to the log file rather than truncating it.

-c FILE Read FILE as a configuration file (or a comma-separated list of configuration
files). Note that the loaded file will only understand snmpd.conf tokens, unless
the configuration type is specified in the file as described in the snmp_config
man page under SWITCHING CONFIGURATION TYPES IN MID-FILE.

-C Do not read any configuration files except the ones optionally specified by the -c
option. Note that this behaviour also covers the persistent configuration files.
This may result in dynamically-assigned values being reset following an agent
restart, unless the relevant persistent config files are explicitly loaded using
the -c option.

-d Dump (in hexadecimal) the sent and received SNMP packets.

-D[TOKEN[,...]]
Turn on debugging output for the given TOKEN(s). Without any tokens specified, it
defaults to printing all the tokens (which is equivalent to the keyword "ALL").
You might want to try ALL for extremely verbose output. Note: You can not put a
space between the -D flag and the listed TOKENs.

-f Do not fork() from the calling shell.

-g GID Change the group ID of the snmpd process into GID after opening listening sockets.
This overrides the agentgroup configuration file parameter.

-h, --help
Display a brief usage message and then exit.

-H Display a list of configuration file directives understood by the agent and then
exit.

-I [-]INITLIST
Specifies which modules should (or should not) be initialized when the agent
starts up. If the comma-separated INITLIST is preceded with a '-', it is the list
of modules that should not be started. Otherwise this is the list of the only
modules that should be started.

To get a list of compiled modules, run the agent with the arguments -Dmib_init -H
(assuming debugging support has been compiled in).

-L[eEfFoOsSnN]
Specify where logging output should be directed (standard error or output, to a
file or via syslog). See LOGGING OPTIONS in snmpcmd(1) for details.

-m MIBLIST
Specifies a colon separated list of MIB modules to load for this application.
This overrides the environment variable MIBS. See snmpcmd(1) for details.

-M DIRLIST
Specifies a colon separated list of directories to search for MIBs. This
overrides the environment variable MIBDIRS. See snmpcmd(1) for details.

-n NAME Set an alternative application name (which will affect the configuration files
loaded). By default this will be snmpd, regardless of the name of the actual
binary.

-p FILE Save the process ID of the daemon in FILE.

-q Print simpler output for easier automated parsing.

-r Do not require root access to run the daemon. Specifically, do not exit if files
only accessible to root (such as /dev/kmem etc.) cannot be opened.

-u UID Change the user ID of the snmpd process into UID (which can be given in numerical
or textual form) after opening listening sockets. This overrides the agentuser
configuration file parameter.

-U Instructs the agent to not remove its pid file (see the -p option) on shutdown.
Overrides the leave_pidfile token in the snmpd.conf file, see snmpd.conf(5).

-v, --version
Print version information for the agent and then exit.

-V Symbolically dump SNMP transactions.

-x ADDRESS
Listens for AgentX connections on the specified address rather than the default
"/var/agentx/master". The address can either be a Unix domain socket path, or the
address of a network interface. The format is the same as the format of listening
addresses described below.

-X Run as an AgentX subagent rather than as an SNMP master agent.

--name="value"
Allows one to specify any token ("name") supported in the snmpd.conf file and sets
its value to "value". Overrides the corresponding token in the snmpd.conf file.
See snmpd.conf(5) for the full list of tokens.

LISTENING ADDRESSES

By default, snmpd listens for incoming SNMP requests on UDP port 161 on all IPv4
interfaces. However, it is possible to modify this behaviour by specifying one or more
listening addresses as arguments to snmpd. A listening address takes the form:

[<transport-specifier>:]<transport-address>

At its simplest, a listening address may consist only of a port number, in which case
snmpd listens on that UDP port on all IPv4 interfaces. Otherwise, the <transport-address>
part of the specification is parsed according to the following table:

<transport-specifier> <transport-address> format

udp (default) hostname[:port] or IPv4-address[:port]

tcp hostname[:port] or IPv4-address[:port]

unix pathname

ipx [network]:node[/port]

aal5pvc or pvc [interface.][VPI.]VCI

udp6 or udpv6 or udpipv6 hostname[:port] or IPv6-address[:port]

tcp6 or tcpv6 or tcpipv6 hostname[:port] or IPv6-address[:port]

ssh hostname:port

dtlsudp hostname:port

Note that <transport-specifier> strings are case-insensitive so that, for example, "tcp"
and "TCP" are equivalent. Here are some examples, along with their interpretation:

127.0.0.1:161 listen on UDP port 161, but only on the loopback interface. This
prevents snmpd being queried remotely. The port specification
":161" is not strictly necessary since that is the default SNMP
port.

TCP:1161 listen on TCP port 1161 on all IPv4 interfaces.

ipx:/40000 listen on IPX port 40000 on all IPX interfaces.

unix:/tmp/local-agent listen on the Unix domain socket /tmp/local-agent.

/tmp/local-agent is identical to the previous specification, since the Unix domain
is assumed if the first character of the <transport-address> is
'/'.

PVC:161 listen on the AAL5 permanent virtual circuit with VPI=0 and
VCI=161 (decimal) on the first ATM adapter in the machine.

udp6:10161 listen on port 10161 on all IPv6 interfaces.

ssh:127.0.0.1:22 Allows connections from the snmp subsystem on the ssh server on
port 22. The details of using SNMP over SSH are defined below.

dtlsudp:127.0.0.1:9161 Listen for connections over DTLS on UDP port 9161. The snmp.conf
file must have the serverCert, configuration tokens defined.

Note that not all the transport domains listed above will always be available; for
instance, hosts with no IPv6 support will not be able to use udp6 transport addresses, and
attempts to do so will result in the error "Error opening specified endpoint". Likewise,
since AAL5 PVC support is only currently available on Linux, it will fail with the same
error on other platforms.

Transport Specific Notes

ssh The SSH transport, on the server side, is actually just a unix named pipe that can
be connected to via a ssh subsystem configured in the main ssh server. The pipe
location (configurable with the sshtosnmpsocket token in snmp.conf) is
/var/net-snmp/sshtosnmp. Packets should be submitted to it via the sshtosnmp
application, which also sends the user ID as well when starting the connection.
The TSM security model should be used when packets should process it.

The sshtosnmp command knows how to connect to this pipe and talk to it. It should
be configured in the OpenSSH sshd configuration file (which is normally
/etc/ssh/sshd_config using the following configuration line:

Subsystem snmp /usr/local/bin/sshtosnmp

The sshtosnmp command will need read/write access to the /var/net-snmp/sshtosnmp
pipe. Although it should be fairly safe to grant access to the average user since
it still requires modifications to the ACM settings before the user can perform
operations, paranoid administrators may want to make the /var/net-snmp directory
accessible only by users in a particular group. Use the sshtosnmpsocketperms
snmp.conf configure option to set the permissions, owner and group of the created
socket.

Access control can be granted to the user "foo" using the following style of
simple snmpd.conf settings:

rouser -s tsm foo authpriv

Note that "authpriv" is acceptable assuming as SSH protects everything that way
(assuming you have a non-insane setup). snmpd has no notion of how SSH has
actually protected a packet and thus the snmp agent assumes all packets passed
through the SSH transport have been protected at the authpriv level.

dtlsudp The DTLS protocol, which is based off of TLS, requires both client and server
certificates to establish the connection and authenticate both sides. In order to
do this, the client will need to configure the snmp.conf file with the clientCert
configuration tokens. The server will need to configure the snmp.conf file with
the serverCert configuration tokens defined.

Access control setup is similar to the ssh transport as the TSM security model
should be used to protect the packet.

CONFIGURATION FILES

       snmpd checks for the existence of and parses the following files:

       /etc/snmp/snmp.conf
             Common configuration for the agent and applications. See snmp.conf(5) for details.

       /etc/snmp/snmpd.conf

       /etc/snmp/snmpd.local.conf
             Agent-specific  configuration.   See  snmpd.conf(5)  for  details.   These files are
             optional and may be used to configure  access  control,  trap  generation,  subagent
             protocols and much else besides.

             In  addition  to these two configuration files in /etc/snmp, the agent will read any
             files with the names snmpd.conf and  snmpd.local.conf  in  a  colon  separated  path
             specified in the SNMPCONFPATH environment variable.

       /usr/share/snmp/mibs/
             The agent will also load all files in this directory as MIBs.  It will not, however,
             load any file that begins with a '.' or descend into subdirectories.