NAME

       tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment

NOTE

       This man page only documents the hardware-specific features of the tripplitesu driver. For
       information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports the Tripp Lite SmartOnline family (via the serial port).

EXTRA ARGUMENTS

       This driver supports the following optional settings in the ups.conf(5):

       lowbatt=num
           Set the low battery warning threshold in percent at which shutdown is initiated by
           upsmon(8). By default, the UPS may not report low battery until there are only a few
           seconds left. Common values are around 25—30.

AUTHOR

       Allan N. Hessenflow <allanh@kallisti.com>

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Other drivers for Tripp-Lite hardware:
       tripplite(8), tripplite_usb(8), usbhid-ups(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: https://www.networkupstools.org/