mcxsubs

mcxsubs -imx <fname> [options] <specs>+

mcxsubs -imx <fname> (input matrix) [-dom <fname> (domain matrix)] [-tf spec (apply tf-spec to input matrix)] [--block (use block matrix)] [--blockc (use complement of block matrix)] [--skin-read (read domain structure without entries)] [--extend (read extended submatrices)] [-tab (read tab file)] [--from-disk (space/speed optimizer)] [-out <fname> (special purpose output file name)] [-efac <num> (random edge selection)] [-dfac <num> (random domain selection)] [-rfac <num> (random column selection)] [-cfac <num> (random row selection)] [--rand-discard (remove random selections)] [--rand-merge (merge random selections)] [--rand-intersect (intersect random selections)] [--rand-exclusive (only random selections)] [-tag-digits k (set precision)] [--tag (tag nodes)] <specs>+

If you are a frequent mcxsubs user with very large graphs, consider converting the input matrix into binary format using mcxconvert and then using the mcxsubs --from-disk option. This should give you a 400-fold speed gain.

mcxsubs lets you extract submatrices/subgraphs corresponding with index sets and (possibly) sets of domains from a given domain matrix (e.g. a matrix representing a clustering). Columns and rows of the target submatrix can be specified both independently and simultaneously, and can be specified as unions of simple index and domain ranges and complements of these.

Because a submatrix or subgraph specification is composed of type, location, column, row, index, and set specifications, the word specification is abbreviated as spec. Multiple submatrices can be specified simultaneously. A submatrix is created for each submatrix spec. Everything encountered after the mcxsubs options are exhausted should be a spec. The syntax of specs is described in the SUBMATRIX SPECIFICATIONS section. By default, the domains of the submatrix will be set to the domains as described in the specification. This can be changed using the uni directives from the fin part.

-imx <fname> (input matrix)
Submatrices will all be selected from the matrix in file <fname>. This option is obligatory, and throughout this manual its argument is called the source matrix.

-dom <fname> (domain matrix)
Submatrices are specified in terms of sets (or domains) of indices. These sets are specified by (the label of) the vectors from the matrix given by this options.

--block (use block matrix)
This replaces the input matrix by the block diagonal matrix induced by the domain matrix specified by the -dom option. It works by including a block for each domain in the domain matrix, and will work if there are overlapping domains. That is, it will not include overlapping parts more than once. The output file name can either be specified in the submatrix specification language using the out(fname) directive, or with the -out option.

--blockc (use complement of block matrix)
This replaces the input matrix by the complement of the block diagonal matrix described above, and selection of the output name is exactly the same.

--skin-read (read domain structure without entries)
This reads a skeleton matrix by only considering its domain structure and not reading any entries, pertaining to the matrix specified by the -imx option. Transform the input matrix values according to the syntax described in mcxio(5).

-tab (read tab file)
Read a tab file. Its domain can be used by the t and T indicators.

--extend (read extended submatrices)
This causes the selection of submatrices where either a row index is in the selected row domain or a columns index is in the selected column domain or both. Equivalently it only excludes matrix entries for which neither the column nor row index is in the selected domains. The resulting matrix has both domains equal to the source matrix.

-out <fname> (special purpose output file name)
This specifies an output name that can be used for special purposes. Normally, output file names are specified in the submatrix specification using the out(fname) directive.

-efac <num> (random edge selection)
num should be inbetween zero and one. It denotes the probability with which each edge is selected.

-dfac <num> (random domain selection)
num should be inbetween zero and one. It denotes the probability with which entries in the domains will make it into the randomized selection used for subsequent processing. By default the randomized selection is intersected with whatever the other selection criteria (if any) yield, i.e. the behaviour under the --rand-intersect option.

If the column and row domain are identical, they are submitted to the same selection process and will end up identical. If you don't want this, use -rfac and -cfac separately.

If you just want a randomized selection, doing

mcxsubs -imx foo -dfac 0.5 'out(foo.rnd)'

will not yield the expected result. Randomized selections only work if a domain has explicitly been specified. The minimal way to achieve this is the following:

mcxsubs -imx foo -dfac 0.5 'dom(cr), out(foo.rnd)'

-rfac <num> (random column selection)
As -dfac, limited to the column domain.

-cfac <num> (random row selection)
As -dfac, limited to the row domain.

--rand-merge (merge random selections)
The random selection(s) of domains identify parts of the matrix that will be merged with the result of the main selection process (default).

--rand-discard (remove random selections)
The random selection(s) of domains identify parts of the matrix that will be removed from the result of the main selection process.

--rand-intersect (intersect random selections)
The random selection(s) of domains identify parts of the matrix that will be intersected with the result of the main selection process. This is the default.

--rand-exclusive (only random selections)
The random selection(s) of domains identify parts of the matrix from which the result of the main selection process will be removed.

-tag-digits k (set precision)
Sets the precision for tagged output. Setting it to -tag-digits -1 disables the output of values altogether - only the node indices and the cluster indices are written.

--tag (tag nodes)
Each node in the column (tail node) listing of the matrix (graph) spec is tagged with the domain it is in. This requires the use of the -dom option. This output mode, called tagged matrix, is currently not recognized by any of the mcl/mcx input routines. It is present to facilitate easier visual inspection of clustering results.

--from-disk (space/speed optimizer)
Use this if the input graph is in binary format, or if the input graph is very large and the subgraph(s) to extract are small in comparison, or if the available memory does not comfortably exceed the size of the graph.

The effect of this option is that the subgraph will be read directly from disk, without reading in the entire graph in advance. This will be done repeatedly for all subgraphs that are specified.

This option reduces memory consumption to the size of the subgraph(s) to be extracted.

For graphs in interchange format, the speed gain is not dramatic. If more than one subgraph is specified, there will most likely be a loss in speed.

With input graphs in binary format, mcxsubs will be *very* much faster, to the extent of 400-fold speed gains. It does not matter whether more than one subgraph is specified.

A submatrix or subgraph spec may contain a number of spec parts. Each part is specified in a function-style notation. Different parts are separated by commas. Parts may occur multiple times, but for most parts only the last one specified will be effective. The spec parts are the following: dom, ext, val, size, fin, and out. These are described below in the sections DOMAINS, EXTENSION, VALUES, SIZE, FINALIZE and OUTPUT.

DOMAINS
The domain part is specified as

dom(X <, Y(ispec) >+)

Here X is the row/column indicator. Rows are indicated with either r or R, columns are indicated with either c or C. X may contain one or two indicators, with a single indicator per column domain and row domain allowed. Uppercase indicators indicate that the complement is being specified relative to the corresponding domain in the target matrix.

Y is the type indicator, it is exactly one of i, I, d, D, c, r, t, or T. The i/I indicators specify that ispec contains a simple index specifation. The d/D specify that ispec contains domain indices. ispec must contain a comma-separated list of integers or integer ranges (e.g. 2, 5, 4-8). c and r are restricted indicators that refer to the domains in the domain matrix. t and T are restricted indicators that refer to the domain encoded in the tab file as specified by the -tab option. Their usage is described further below.

For domain specifications (d/D) the columns indexed by these integers in the matrix specified in the -dom option will be fetched and merged. If -dom was not used the target matrix itself (as specified by the -imx option) will be used. For simple specifications (i/I) the result is simply the list of integers itself. Uppercase indicators indicate that the complement is being specified.

Examples:

dom(cr, i(0-6,10,11-14))
Principal submatrix on indices 0-6, 10, and 11-14 - all column and row indices are from this set. Equivalently, this encodes the subgraph on nodes 0-6, 10, 11-14. The 'c' stands for column, the 'r' for row, and the 'i' for index. It is also possible to specify a 'd' part (standing for domain), this is shown further below.

dom(c, i(0-6,10,11-14)), dom(r, i(1-6,10,11-14))
Equivalent (but less clear) spec of the above.

dom(cR, i(0-6,10,11-14))
Matrix with column indices in 0-6, 10, 11-14, and row indices in the complement of this set. Corresponds with all edges going out from the set 0-6, 10, 11-14. Complements are triggered by the use of a capital; see the next examples.

dom(c, i(0-6,10,11-14)), dom(R, i(1-6,10,11-14))


dom(c, i(0-6,10,11-14)), dom(r, I(1-6,10,11-14))


Both these examples are equivalent to the previous one. In the last example, the capital 'I' indicates that the complement should be taken. In this example, 'r' combined with 'I' has the same effect as 'R' combined with 'i'.

dom(c, d(3,5-9)), dom(r, d(8-14), i(10-30))
Column indices are taken from the domains 3, 5-9 (from the domain matrix specified by -dom), row indices are taken from domains 8-14 plus the indices 10-30.

dom(cR, d(0-2))
Column indices are all indices from domains 0-2, row indices are all other indices. This gives all edges going out from domains 0-2.

The use of 'D' is analogous to that of 'C', 'R', and 'I'. Thus, D(0-3,8,21-30) specifies all indices which are in the complement of the set formed by taking the union of domains 0-3,8,21-30.

The c and r indicators must be followed by a pair of matching parentheses. They specify to take respectively the column domain and the row domain of the domain matrix (cf. -dom).

The t and T indicators must be followed by a pair of matching parentheses. They specify to take the domain found in the tab file or its complement.

As seen above, indices (either representing themselves or domains) are entered as comma-separated lists of single indices, ranges of indices (which may overlap), or staircases of indices (lists of indices with a fixed increment inbetween successive indices). The union of the corresponding elements is taken and passed along. Before anything else, the result set is replaced by its complement if 'I' is specified (for simple indices) or 'D' is specified (for domains). If there is both an index and a set spec string, the union of the results of both is taken and passed along. If the latter result is passed to either 'C' or 'R', it is replaced by its complement.

A range is specified e.g. as 10-14 and it is inclusive, denoting in this case the indices {10,11,12,13,14}.

EXTENSION
The extension part is specified as

ext( < disc(k) | cdisc(k) | rdisc(k) >)

This option requires the input matrix to be held in memory. This implies it will not work with the --from-disk option.

This assumes that the input matrix encodes a graph, so the column and row domains must be equal. It will take the currently selected domain (column domain for disc and cdisc, row domain for rdisc), and add all nodes to it that are reachable in k steps. The disc variant replaces both column and row domains by the extended domain, the other variants just change a single domain.

Setting k to -1 results in adding all nodes that can be reached from the start domain.

VALUES
The value part is specified as

val(<tf-spec>)

It transforms or removes values according to <tf-spec>. Refer to mcxio(5) for a description of the transformation specification syntax and the available transformation primitives.

SIZE
The size part is specified as

size( < lt(x) | ceil(x) | gq(x) | rmgq(x) > + )

Where x is a nonnegative integer, and multiple specifications are separated by commas. The strings 'lt', 'lq', 'gq', 'gt', respectively denote less than, less than or equal to, greater than or equal to, and greater than.

This prunes or removes column vectors based on their size. If lt is used, column vectors are removed if the number of entries exceeds the specified bound. If gq is used, vectors are discarded if the number of entries is smaller than the specified bound. If a column vector has an excess of entries over the bound specified by ceil, the smallest entries are removed. Ties are not arbitrarily broken, implying that the resulting vector may still have more entries than the specified bound.

FINALIZE
The finalize part is specified as fin( < key > ) where key is a string and multiple keys are separated by commas. The corresponding actions are generally applied to the matrix that was extracted according to the domain and value specifications. Exceptions are indicated below. Currently, there is a fixed order in which actions are considered, corresponding with the order in which they are listed below.

skel
This creates an empty submatrix on the specified domains, and does not fill it with the corresponding entries from the source matrix. Options from the fin part that affect the column and row domains of a matrix will still be in effect.

uni


unir


unic


After the submatrix is selected from the source matrix, its domains are changed to mirror one or both of the domains of the source matrix.

tp
The resulting submatrix is replaced by its transpose.

cc
The resulting submatrix is made characteristic.

scrubc


scrubr


scrubg


scrub


Domains are shrunk if there are no corresponding entries in the matrix. This is done for both domains if scrub is specified, for the column domain if scrubc is specified, and for the row domain if scrubr is specified. Thus, with scrubc columns are removed from the domain and the matrix if they are empty. With scrubg the union of the resulting domains is taken.

mapc


mapr


map


The appropriate domains are mapped onto consecutive indices starting at zero.

OUTPUT
The output part is specified as out( fname <, key >* ) that is, the fname option is obligatory if the out part is specified. Currently, key can be a single directive, namely wb specifying that the resulting matrix should be output in binary format.

Stijn van Dongen.

mcx(1), and mclfamily(7) for an overview of all the documentation and the utilities in the mcl family.