Provided by: tcl9.0-doc_9.0.2+dfsg-1_all 
NAME
http - Client-side implementation of the HTTP/1.1 protocol
SYNOPSIS
package require http ?2.10?
::http::config ?-option value ...?
::http::geturl url ?-option value ...?
::http::formatQuery key value ?key value ...?
::http::quoteString value
::http::reset token ?why?
::http::wait token
::http::status token
::http::size token
::http::error token
::http::postError token
::http::cleanup token
::http::requestLine token
::http::requestHeaders token ?headerName?
::http::requestHeaderValue token headerName
::http::responseLine token
::http::responseCode token
::http::reasonPhrase code
::http::responseHeaders token ?headerName?
::http::responseHeaderValue token headerName
::http::responseInfo token
::http::responseBody token
::http::register proto port command ?socketCmdVarName? ?useSockThread? ?endToEndProxy?
::http::registerError sock ?message?
::http::unregister proto
::http::code token
::http::data token
::http::meta token ?headerName?
::http::metaValue token headerName
::http::ncode token
EXPORTED COMMANDS
Namespace http exports the commands config, formatQuery, geturl, postError, quoteString, reasonPhrase,
register, registerError, requestHeaders, requestHeaderValue, requestLine, responseBody, responseCode,
responseHeaders, responseHeaderValue, responseInfo, responseLine, reset, unregister, and wait.
It does not export the commands cleanup, code, data, error, meta, metaValue, ncode, size, or status.
________________________________________________________________________________________________________________
DESCRIPTION
The http package provides the client side of the HTTP/1.1 protocol, as defined in RFC 9110 to 9112, which
supersede RFC 7230 to RFC 7235, which in turn supersede RFC 2616. The package implements the GET, POST,
and HEAD operations of HTTP/1.1. It allows configuration of a proxy host to get through firewalls. The
package is compatible with the Safesock security policy, so it can be used by untrusted applets to do URL
fetching from a restricted set of hosts. This package can be extended to support additional HTTP
transport protocols, such as HTTPS, by providing a custom socket command, via ::http::register.
The ::http::geturl procedure does a HTTP transaction. Its options determine whether a GET, POST, or
HEAD transaction is performed. The return value of ::http::geturl is a token for the transaction. The
token can be supplied as an argument to other commands, to manage the transaction and examine its
results.
If the -command option is specified, then the HTTP operation is done in the background. ::http::geturl
returns immediately after generating the HTTP request and the -command callback is invoked when the
transaction completes. For this to work, the Tcl event loop must be active. In Tk applications this is
always true. For pure-Tcl applications, the caller can use ::http::wait after calling ::http::geturl to
start the event loop.
Note: The event queue is even used without the -command option. As a side effect, arbitrary commands may
be processed while http::geturl is running.
When the HTTP server has replied to the request, call the command ::http::responseInfo, which returns a
dict of metadata that is essential for identifying a successful transaction and making use of the
response. See section METADATA for details of the information returned. The response itself is returned
by command ::http::responseBody, unless it has been redirected to a file by the -channel option of
::http::geturl.
COMMANDS
::http::config ?options?
The ::http::config command is used to set and query the name of the proxy server and port, and the
User-Agent name used in the HTTP requests. If no options are specified, then the current
configuration is returned. If a single argument is specified, then it should be one of the flags
described below. In this case the current value of that setting is returned. Otherwise, the
options should be a set of flags and values that define the configuration:
-accept mimetypes
The Accept header of the request. The default is */*, which means that all types of
documents are accepted. Otherwise you can supply a comma-separated list of mime type
patterns that you are willing to receive. For example, “image/gif, image/jpeg, text/*”.
-cookiejar command
The cookie store for the package to use to manage HTTP cookies. command is a command 2
prefix list; if the empty list (the default value) is used, no cookies will be sent by 2
requests or stored from responses. The command indicated by command, if supplied, must obey 2
the COOKIE JAR PROTOCOL described below.
-pipeline boolean
Specifies whether HTTP/1.1 transactions on a persistent socket will be pipelined. See the
PERSISTENT SOCKETS section for details. The default is 1.
-postfresh boolean
Specifies whether requests that use the POST method will always use a fresh socket,
overriding the -keepalive option of command http::geturl. See the PERSISTENT SOCKETS
section for details. The default is 0.
-proxyauth string
If non-empty, the string is supplied to the proxy server as the value of the request header
Proxy-Authorization. This option can be used for HTTP Basic Authentication. If the proxy
server requires authentication by another technique, e.g. Digest Authentication, the
-proxyauth option is not useful. In that case the caller must expect a 407 response from
the proxy, compute the authentication value to be supplied, and use the -headers option to
supply it as the value of the Proxy-Authorization header.
-proxyfilter command
The command is a callback that is made during ::http::geturl to determine if a proxy is
required for a given host. One argument, a host name, is added to command when it is
invoked. If a proxy is required, the callback should return a two-element list containing
the proxy server and proxy port. Otherwise the filter command should return an empty list.
The default value of -proxyfilter is http::ProxyRequired, and this command returns the
values of the -proxyhost and -proxyport settings if they are non-empty. The options
-proxyhost, -proxyport, and -proxynot are used only by http::ProxyRequired, and nowhere
else in ::http::geturl. A user-supplied -proxyfilter command may use these options, or
alternatively it may obtain values from elsewhere in the calling script. In the latter
case, any values provided for -proxyhost, -proxyport, and -proxynot are unused.
The ::http::geturl command runs the -proxyfilter callback inside a catch command.
Therefore an error in the callback command does not call the bgerror handler. See the
ERRORS section for details.
-proxyhost hostname
The host name or IP address of the proxy server, if any. If this value is the empty
string, the URL host is contacted directly. See -proxyfilter for how the value is used.
-proxynot list
A Tcl list of domain names and IP addresses that should be accessed directly, not through
the proxy server. The target hostname is compared with each list element using a case-
insensitive string match. It is often convenient to use the wildcard "*" at the start of a
domain name (e.g. *.example.com) or at the end of an IP address (e.g. 192.168.0.*). See
-proxyfilter for how the value is used.
-proxyport number
The port number of the proxy server. See -proxyfilter for how the value is used.
-repost boolean
Specifies what to do if a POST request over a persistent connection fails because the
server has half-closed the connection. If boolean true, the request will be automatically
retried; if boolean false it will not, and the application that uses http::geturl is
expected to seek user confirmation before retrying the POST. The value true should be used
only under certain conditions. See the PERSISTENT SOCKETS section for details. The default
is 0.
-threadlevel level
Specifies whether and how to use the Thread package. Possible values of level are 0, 1 or
2.
0 (the default) do not use Thread
1 use Thread if it is available, do not use it if it is unavailable
2 use Thread if it is available, raise an error if it is unavailable
The Tcl socket -async command can block in adverse cases (e.g. a slow DNS lookup). Using
the Thread package works around this problem, for both HTTP and HTTPS transactions. Values
of level other than 0 are available only to the main interpreter in each thread. See
section THREADS for more information.
-urlencoding encoding
The encoding used for creating the x-url-encoded URLs with ::http::formatQuery and
::http::quoteString. The default is utf-8, as specified by RFC 2718.
-useragent string
The value of the User-Agent header in the HTTP request. In an unsafe interpreter, the
default value depends upon the operating system, and the version numbers of http and Tcl,
and is (for example) “Mozilla/5.0 (Windows; U; Windows NT 10.0) http/2.10.0 Tcl/9.0.0”. A
safe interpreter cannot determine its operating system, and so the default in a safe
interpreter is to use a Windows 10 value with the current version numbers of http and Tcl.
-zip boolean
If the value is boolean true, then by default requests will send a header “Accept-Encoding:
gzip,deflate”. If the value is boolean false, then by default requests will send a header
“Accept-Encoding: identity”. In either case the default can be overridden for an
individual request by supplying a custom Accept-Encoding header in the -headers option of
http::geturl. The default value is 1.
::http::geturl url ?options?
The ::http::geturl command is the main procedure in the package. The -query or -querychannel
option causes a POST operation and the -validate option causes a HEAD operation; otherwise, a GET
operation is performed. The ::http::geturl command returns a token value that can be passed as an
argument to other commands to get information about the transaction. See the METADATA and ERRORS
section for details. The ::http::geturl command blocks until the operation completes, unless the
-command option specifies a callback that is invoked when the HTTP transaction completes.
::http::geturl takes several options:
-binary boolean
Specifies whether to force interpreting the URL data as binary. Normally this is auto-
detected (anything not beginning with a text content type or whose content encoding is gzip
or deflate is considered binary data).
-blocksize size
The block size used when reading the URL. At most size bytes are read at once. After each
block, a call to the -progress callback is made (if that option is specified).
-channel name
Copy the URL contents to channel name instead of saving it in a Tcl variable for retrieval
by ::http::responseBody.
-command callback
The presence of this option causes ::http::geturl to return immediately. After the HTTP
transaction completes, the value of callback is expanded, an additional argument is added,
and the resulting command is evaluated. The additional argument is the token returned from
::http::geturl. This token is the name of an array that is described in the STATE ARRAY
section. Here is a template for the callback:
proc httpCallback {token} {
upvar 0 $token state
# Access state as a Tcl array defined in this proc
...
return
}
The ::http::geturl command runs the -command callback inside a catch command. Therefore an
error in the callback command does not call the bgerror handler. See the ERRORS section
for details.
-guesstype boolean
Attempt to guess the Content-Type and character set when a misconfigured server provides no
information. The default value is false (do nothing). If boolean true then, if the server
does not send a Content-Type header, or if it sends the value "application/octet-stream",
http::geturl will attempt to guess appropriate values. This is not intended to become a
general-purpose tool, and currently it is limited to detecting XML documents that begin
with an XML declaration. In this case the Content-Type is changed to "application/xml",
the binary flag state(binary) is changed to 0, and the character set is changed to the one
specified by the "encoding" tag of the XML line, or to utf-8 if no encoding is specified.
Not used if a -channel is specified.
-handler callback
If this option is absent, http::geturl processes incoming data itself, either appending it
to the state(body) variable or writing it to the -channel. But if the -handler option is
present, http::geturl does not do this processing and instead calls callback. Whenever
HTTP data is available, the value of callback is expanded, an additional two arguments are
added, and the resulting command is evaluated. The two additional arguments are: the
socket for the HTTP data and the token returned from ::http::geturl. The token is the name
of a global array that is described in the STATE ARRAY section. The procedure is expected
to return the number of bytes read from the socket. Here is a template for the callback:
proc httpHandlerCallback {socket token} {
upvar 0 $token state
# Access socket, and state as a Tcl array defined in this proc
# For example...
...
set data [read $socket 1000]
set nbytes [string length $data]
...
return $nbytes
}
The http::geturl code for the -handler option is not compatible with either compression or
chunked transfer-encoding. If -handler is specified, then to work around these issues
http::geturl will reduce the HTTP protocol to 1.0, and override the -zip option (i.e. it
will send the header Accept-Encoding: identity instead of Accept-Encoding: gzip,deflate).
If options -handler and -channel are used together, the handler is responsible for copying
the data from the HTTP socket to the specified channel. The name of the channel is
available to the handler as element -channel of the token array.
The ::http::geturl command runs the -handler callback inside a catch command. Therefore an
error in the callback command does not call the bgerror handler. See the ERRORS section
for details.
-headers keyvaluelist
This option is used to add headers not already specified by ::http::config to the HTTP
request. The keyvaluelist argument must be a list with an even number of elements that
alternate between keys and values. The keys become header field names. Newlines are
stripped from the values so the header cannot be corrupted. For example, if keyvaluelist
is Pragma no-cache then the following header is included in the HTTP request:
Pragma: no-cache
-keepalive boolean
If boolean true, attempt to keep the connection open for servicing multiple requests.
Default is 0.
-method type
Force the HTTP request method to type. ::http::geturl will auto-select GET, POST or HEAD
based on other options, but this option overrides that selection and enables choices like
PUT and DELETE for WebDAV support.
It is the caller's responsibility to ensure that the headers and request body (if any)
conform to the requirements of the request method. For example, if using -method POST to
send a POST with an empty request body, the caller must also supply the option
-headers {Content-Length 0}
-myaddr address
Pass an specific local address to the underlying socket call in case multiple interfaces
are available.
-progress callback
If the -progress option is present, then the callback is made after each transfer of data
from the URL. The value of callback is expanded, an additional three arguments are added,
and the resulting command is evaluated. The three additional arguments are: the token
returned from ::http::geturl, the expected total size of the contents from the Content-
Length response header, and the current number of bytes transferred so far. The token is
the name of a global array that is described in the STATE ARRAY section. The expected
total size may be unknown, in which case zero is passed to the callback. Here is a
template for the progress callback:
proc httpProgress {token total current} {
upvar 0 $token state
# Access state as a Tcl array defined in this proc
...
return
}
-protocol version
Select the HTTP protocol version to use. This should be 1.0 or 1.1 (the default). Should
only be necessary for servers that do not understand or otherwise complain about HTTP/1.1.
-query query
This flag (if the value is non-empty) causes ::http::geturl to do a POST request that
passes the string query verbatim to the server as the request payload. The content format
(and encoding) of query is announced by the request header Content-Type which is set by the
option -type. Any value of -type is permitted, and it is the responsibility of the caller
to supply query in the correct format.
If -type is not specified, it defaults to application/x-www-form-urlencoded, which requires
query to be an x-url-encoding formatted query-string (this -type and query format are used
in a POST submitted from an html form). The ::http::formatQuery procedure can be used to
do the formatting.
-queryblocksize size
The block size used when posting query data to the URL. At most size bytes are written at
once. After each block, a call to the -queryprogress callback is made (if that option is
specified).
-querychannel channelID
This flag causes ::http::geturl to do a POST request that passes the data contained in
channelID to the server. The data contained in channelID must be an x-url-encoding
formatted query unless the -type option below is used. If a Content-Length header is not
specified via the -headers options, ::http::geturl attempts to determine the size of the
post data in order to create that header. If it is unable to determine the size, it
returns an error.
-queryprogress callback
If the -queryprogress option is present, then the callback is made after each transfer of
data to the URL in a POST request (i.e. a call to ::http::geturl with option -query or
-querychannel) and acts exactly like the -progress option (the callback format is the
same).
-strict boolean
If true then the command will test that the URL complies with RFC 3986, i.e. that it has
no characters that should be "x-url-encoded" (e.g. a space should be encoded to "%20").
Default value is 1.
-timeout milliseconds
If milliseconds is non-zero, then ::http::geturl sets up a timeout to occur after the
specified number of milliseconds. A timeout results in a call to ::http::reset and to the
-command callback, if specified. The return value of ::http::status (and the value of the
status key in the dictionary returned by ::http::responseInfo) is timeout after a timeout
has occurred.
-type mime-type
Use mime-type as the Content-Type value, instead of the default value (application/x-www-
form-urlencoded) during a POST operation.
-validate boolean
If boolean is non-zero, then ::http::geturl does an HTTP HEAD request. This server returns
the same status line and response headers as it would for a HTTP GET request, but omits the
response entity (the URL "contents"). The response headers are available after the
transaction using command ::http::responseHeaders or, for selected information,
::http::responseInfo.
::http::formatQuery key value ?key value ...?
This procedure does x-url-encoding of query data. It takes an even number of arguments that are
the keys and values of the query. It encodes the keys and values, and generates one string that
has the proper & and = separators. The result is suitable for the -query value passed to
::http::geturl.
::http::quoteString value
This procedure does x-url-encoding of string. It takes a single argument and encodes it.
::http::reset token ?why?
This command resets the HTTP transaction identified by token, if any. This sets the state(status)
value to why, which defaults to reset, and then calls the registered -command callback.
::http::wait token
This command blocks and waits for the transaction to complete. This only works in trusted code
because it uses vwait. Also, it is not useful for the case where ::http::geturl is called without
the -command option because in this case the ::http::geturl call does not return until the HTTP
transaction is complete, and thus there is nothing to wait for.
::http::status token
This command returns a description of the status of the HTTP transaction. The return value is the
empty string until the HTTP transaction is completed; after completion it has one of the values
ok, eof, error, timeout, and reset. The meaning of these values is described in the section
ERRORS (below).
The name "status" is not related to the terms "status line" and "status code" that are defined for
a HTTP response.
::http::size token
This command returns the number of bytes received so far from the URL in the ::http::geturl call.
::http::error token
This command returns the error information if the HTTP transaction failed, or the empty string if
there was no error. The information is a Tcl list of the error message, stack trace, and error
code.
::http::postError token
A POST request is a call to ::http::geturl with either the -query or -querychannel option. The
::http::postError command returns the error information generated when a HTTP POST request sends
its request-body to the server; or the empty string if there was no error. The information is a
Tcl list of the error message, stack trace, and error code. When this type of error occurs, the
::http::geturl command continues the transaction and attempts to receive a response from the
server.
::http::cleanup token
This procedure cleans up the state associated with the connection identified by token. After this
call, the procedures like ::http::responseBody cannot be used to get information about the
operation. It is strongly recommended that you call this function after you are done with a given
HTTP request. Not doing so will result in memory not being freed, and if your app calls
::http::geturl enough times, the memory leak could cause a performance hit...or worse.
::http::requestLine token
This command returns the "request line" sent to the server. The "request line" is the first line
of a HTTP client request, and has three elements separated by spaces: the HTTP method, the URL
relative to the server, and the HTTP version. Examples:
GET / HTTP/1.1 GET /introduction.html?subject=plumbing HTTP/1.1 POST /forms/order.html HTTP/1.1
::http::requestHeaders token ?headerName?
This command returns the HTTP request header names and values, in the order that they were sent to
the server, as a Tcl list of the form ?name value ...? Header names are case-insensitive and are
converted to lower case. The return value is not a dict because some header names may occur more
than once. If one argument is supplied, all request headers are returned. If two arguments are
supplied, the second provides the value of a header name. Only headers with the requested name
(converted to lower case) are returned. If no such headers are found, an empty list is returned.
::http::requestHeaderValue token headerName
This command returns the value of the HTTP request header named headerName. Header names are
case-insensitive and are converted to lower case. If no such header exists, the return value is
the empty string. If there are multiple headers named headerName, the result is obtained by
joining the individual values with the string ", " (comma and space), preserving their order.
::http::responseLine token
This command returns the first line of the server response: the HTTP "status line". The "status
line" has three elements separated by spaces: the HTTP version, a three-digit numerical "status
code", and a "reason phrase". Only the reason phrase may contain spaces. Examples:
HTTP/1.1 200 OK HTTP/1.0 404 Not Found
The "status code" is a three-digit number in the range 100 to 599. A value of 200 is the normal
return from a GET request, and its matching "reason phrase" is "OK". Codes beginning with 4 or 5
indicate errors. Codes beginning with 3 are redirection errors. In this case the Location
response header specifies a new URL that contains the requested information.
The "reason phrase" is a textual description of the "status code": it may vary from server to
server, and can be changed without affecting the HTTP protocol. The recommended values (RFC 7231
and IANA assignments) for each code are provided by the command ::http::reasonPhrase.
::http::responseCode token
This command returns the "status code" (200, 404, etc.) of the server "status line". If a three-
digit code cannot be found, the full status line is returned. See command ::http::responseLine
for more information on the "status line".
::http::reasonPhrase code
This command returns the IANA recommended "reason phrase" for a particular "status code" returned
by a HTTP server. The argument code is a valid status code, and therefore is an integer in the
range 100 to 599 inclusive. For numbers in this range with no assigned meaning, the command
returns the value "Unassigned". Several status codes are used only in response to the methods
defined by HTTP extensions such as WebDAV, and not in response to a HEAD, GET, or POST request
method.
The "reason phrase" returned by a HTTP server may differ from the recommended value, without
affecting the HTTP protocol. The value returned by ::http::geturl can be obtained by calling
either command ::http::responseLine (which returns the full status line) or command
::http::responseInfo (which returns a dictionary, with the "reason phrase" stored in key
reasonPhrase).
A registry of valid status codes is maintained at https://www.iana.org/assignments/http-status-
codes/http-status-codes.xhtml
::http::responseHeaders token ?headerName?
The response from a HTTP server includes metadata headers that describe the response body and the
transaction itself. This command returns the HTTP response header names and values, in the order
that they were received from the server, as a Tcl list of the form ?name value ...? Header names
are case-insensitive and are converted to lower case. The return value is not a dict because some
header names may occur more than once, notably Set-Cookie. If the second argument is not
supplied, all response headers are returned. If the second argument is supplied, it provides the
value of a header name. Only headers with the requested name (converted to lower case) are
returned. If no such headers are found, an empty list is returned. See section METADATA for more
information.
::http::responseHeaderValue token headerName
This command returns the value of the HTTP response header named headerName. Header names are
case-insensitive and are converted to lower case. If no such header exists, the return value is
the empty string. If there are multiple headers named headerName, the result is obtained by
joining the individual values with the string ", " (comma and space), preserving their order.
Multiple headers with the same name may be processed in this manner, except Set-Cookie which does
not conform to the comma-separated-list syntax and cannot be combined into a single value. Each
Set-Cookie header must be treated individually, e.g. by processing the return value of
::http::responseHeaders token Set-Cookie.
::http::responseInfo token
This command returns a dict of selected response metadata that are essential for identifying a
successful transaction and making use of the response, along with other metadata that are
informational. The keys of the dict are stage, status, responseCode, reasonPhrase, contentType,
binary, redirection, upgrade, error, postError, method, charset, compression, httpRequest,
httpResponse, url, connectionRequest, connectionResponse, connectionActual, transferEncoding,
totalPost, currentPost, totalSize, and currentSize. The meaning of these keys is described in the
section METADATA below.
It is always worth checking the value of binary after a HTTP transaction, to determine whether a
misconfigured server has caused http to interpret a text resource as a binary, or vice versa.
After a POST transaction, check the value of postError to verify that the request body was
uploaded without error.
::http::responseBody token
This command returns the entity sent by the HTTP server (unless -channel was used, in which case
the entity was delivered to the channel, and the command returns the empty string).
Other terms for "entity", with varying precision, include "representation of resource",
"resource", "response body after decoding", "payload", "message body after decoding",
"content(s)", and "file".
::http::register proto port command ?socketCmdVarName? ?useSockThread? ?endToEndProxy?
This procedure allows one to provide custom HTTP transport types such as HTTPS, by registering a
prefix, the default port, and the command to execute to create the Tcl channel. The optional
arguments configure how http uses the custom transport, and have default values that are
compatible with older versions of http in which ::http::register has no optional arguments.
Argument socketCmdVarName is the name of a variable provided by the transport, whose value is the
command used by the transport to open a socket. Its default value is set by the transport and is
"::socket", but if the name of the variable is supplied to ::http::register, then http will set a
new value in order to make optional facilities available. These facilities are enabled by the
optional arguments useSockThread, endToEndProxy, which take boolean values with default value
false.
Iff argument useSockThread is supplied and is boolean true, then iff permitted by the value
[http::config -threadlevel] and by the availability of package Thread, sockets created for the
transport will be opened in a different thread so that a slow DNS lookup will not cause the script
to block.
Iff argument endToEndProxy is supplied and is boolean true, then when http::geturl accesses a
server via a proxy, it will open a channel by sending a CONNECT request to the proxy, and it will
then make its request over this channel. This allows end-to-end encryption for HTTPS requests
made through a proxy.
For example,
package require http
package require tls
::http::register https 443 ::tls::socket ::tls::socketCmd 1 1
set token [::http::geturl https://my.secure.site/]
::http::registerError sock ?message?
This procedure allows a registered protocol handler to deliver an error message for use by http.
Calling this command does not raise an error. The command is useful when a registered protocol
detects an problem (for example, an invalid TLS certificate) that will cause an error to propagate
to http. The command allows http to provide a precise error message rather than a general one.
The command returns the value provided by the last call with argument message, or the empty string
if no such call has been made.
::http::unregister proto
This procedure unregisters a protocol handler that was previously registered via ::http::register,
returning a six-item list of the values that were previously supplied to ::http::register if there
was such a handler, and an error if there was no such handler.
::http::code token
An alternative name for the command ::http::responseLine
::http::data token
An alternative name for the command ::http::responseBody.
::http::meta token ?headerName?
An alternative name for the command ::http::responseHeaders
::http::ncode token
An alternative name for the command ::http::responseCode
ERRORS
The ::http::geturl procedure will raise errors in the following cases: invalid command line options, or
an invalid URL. These errors mean that it cannot even start the network transaction. For synchronous
::http::geturl calls (where -command is not specified), it will raise an error if the URL is on a non-
existent host or at a bad port on an existing host. It will also raise an error for any I/O errors while
writing out the HTTP request line and headers, or reading the HTTP reply headers or data. Because
::http::geturl does not return a token in these cases, it does all the required cleanup and there is no
issue of your app having to call ::http::cleanup.
For asynchronous ::http::geturl calls, all of the above error situations apply, except that if there is
any error while reading the HTTP reply headers or data, no exception is thrown. This is because after
writing the HTTP headers, ::http::geturl returns, and the rest of the HTTP transaction occurs in the
background. The command callback can check if any error occurred during the read by calling
::http::responseInfo to check the transaction status.
Alternatively, if the main program flow reaches a point where it needs to know the result of the
asynchronous HTTP request, it can call ::http::wait and then check status and error, just as the
synchronous call does.
The ::http::geturl command runs the -command, -handler, and -proxyfilter callbacks inside a catch
command. Therefore an error in the callback command does not call the bgerror handler. When debugging
one of these callbacks, it may be convenient to report errors by using a catch command within the
callback command itself, e.g. to write an error message to stdout.
In any case, you must still call ::http::cleanup to delete the state array when you are done.
There are other possible results of the HTTP transaction determined by examining the status from
::http::status (or the value of the status key in the dictionary returned by ::http::responseInfo).
These are described below.
ok If the HTTP transaction completes entirely, then status will be ok. However, you should still
check the ::http::responseLine value to get the HTTP status. The ::http::responseCode procedure
provides just the numeric error (e.g., 200, 404 or 500) while the ::http::responseLine procedure
returns a value like “HTTP 404 File not found”.
eof If the server closes the socket without replying, then no error is raised, but the status of the
transaction will be eof.
error The error message, stack trace, and error code are accessible via ::http::error. The error
message is also provided by the value of the error key in the dictionary returned by
::http::responseInfo.
timeout
A timeout occurred before the transaction could complete.
reset The user has called ::http::reset.
"" (empty string) The transaction has not yet finished.
Another error possibility is that ::http::geturl failed to write the whole of the POST request body
(-query or -querychannel data) to the server. ::http::geturl stores the error message for later
retrieval by the ::http::postError or ::http::responseInfo commands, and then attempts to complete the
transaction. If it can read the server's response the status will be ok, but it is important to call
::http::postError or ::http::responseInfo after every POST to check that the data was sent in full. If
the server has closed the connection the status will be eof.
METADATA
MOST USEFUL METADATA
When a HTTP server responds to a request, it supplies not only the entity requested, but also metadata.
This is provided by the first line (the "status line") of the response, and by a number of HTTP headers.
Further metadata relates to how ::http::geturl has processed the response from the server.
The most important metadata can be accessed with the command ::http::responseInfo. This command returns
a dict of metadata that are essential for identifying a successful transaction and making use of the
response, along with other metadata that are informational. The keys of the dict are:
===== Essential Values =====
stage This value, set by ::http::geturl, describes the stage that the transaction has reached. Values,
in order of the transaction lifecycle, are: "created", "connecting", "header", "body", and
"complete". The other dict keys will not be available until the value of stage is "body" or
"complete". The key currentSize has its final value only when stage is "complete".
status This value, set by ::http::geturl, is "ok" for a successful transaction; "eof", "error",
"timeout", or "reset" for an unsuccessful transaction; or "" if the transaction is still in
progress. The value is the same as that returned by command ::http::status. The meaning of these
values is described in the section ERRORS (above).
responseCode
The "HTTP status code" sent by the server in the first line (the "status line") of the response.
If the value cannot be extracted from the status line, the full status line is returned.
reasonPhrase
The "reason phrase" sent by the server as a description of the HTTP status code. If the value
cannot be extracted from the status line, the full status line is returned.
contentType
The value of the Content-Type response header or, if the header was not supplied, the default
value "application/octet-stream".
binary This boolean value, set by ::http::geturl, describes how the command has interpreted the entity
returned by the server (after decoding any compression specified by the Content-Encoding response
header). This decoded entity is accessible as the return value of the command
::http::responseBody.
The value is true if http has interpreted the decoded entity as binary. The value returned by
::http::responseBody is a Tcl binary string. This is a suitable format for image data, zip files,
etc. ::http::geturl chooses this value if the user has requested a binary interpretation by
passing the option -binary to the command, or if the server has supplied a binary content type in
a Content-Type response header, or if the server has not supplied any Content-Type header.
The value is false in other cases, and this means that http has interpreted the decoded entity as
text. The text has been converted, from the character set notified by the server, into Tcl's
internal Unicode format; the value returned by ::http::responseBody is an ordinary Tcl string.
It is always worth checking the value of "binary" after a HTTP transaction, to determine whether a
misconfigured server has caused http to interpret a text resource as a binary, or vice versa.
redirection
The URL that is the redirection target. The value is that of the Location response header. This
header is sent when a response has status code 3XX (redirection).
upgrade
If not empty, the value indicates the protocol(s) to which the server will switch after completion
of this transaction, while continuing to use the same connection. When the server intends to
switch protocols, it will also send the value "101" as the status code (the responseCode key), and
the word "upgrade" as an element of the Connection response header (the connectionResponse key),
and it will not send a response body. See the section PROTOCOL UPGRADES for more information.
error The error message, if there is one. Further information, including a stack trace and error code,
are available from command ::http::error.
postError
The error message (if any) generated when a HTTP POST request sends its request-body to the
server. Further information, including a stack trace and error code, are available from command
::http::postError. A POST transaction may appear complete, according to the keys stage, status,
and responseCode, but it is important to check this postError key in case an error occurred when
uploading the request-body.
===== Informational Values =====
method The HTTP method used in the request.
charset
The value of the charset attribute of the Content-Type response header. The charset value is used
only for a text resource. If the server did not specify a charset, the value defaults to that of
the variable ::http::defaultCharset, which unless it has been deliberately modified by the caller
is iso8859-1. Incoming text data is automatically converted from the character set defined by
charset to Tcl's internal Unicode representation, i.e. to a Tcl string.
compression
A copy of the Content-Encoding response-header value.
httpRequest
The version of HTTP specified in the request (i.e. sent in the request line). The value is that
of the option -protocol supplied to ::http::geturl (default value "1.1"), unless the command
reduced the value to "1.0" because it was passed the -handler option.
httpResponse
The version of HTTP used by the server (obtained from the response "status line"). The server
uses this version of HTTP in its response, but ensures that this response is compatible with the
HTTP version specified in the client's request. If the value cannot be extracted from the status
line, the full status line is returned.
url The requested URL, typically the URL supplied as an argument to ::http::geturl but without its
"fragment" (the final part of the URL beginning with "#").
connectionRequest
The value, if any, sent to the server in Connection request header(s).
connectionResponse
The value, if any, received from the server in Connection response header(s).
connectionActual
This value, set by ::http::geturl, reports whether the connection was closed after the transaction
(value "close"), or left open (value "keep-alive").
transferEncoding
The value of the Transfer-Encoding response header, if it is present. The value is either
"chunked" (indicating HTTP/1.1 "chunked encoding") or the empty string.
totalPost
The total length of the request body in a POST request.
currentPost
The number of bytes of the POST request body sent to the server so far. The value is the same as
that returned by command ::http::size.
totalSize
A copy of the Content-Length response-header value. The number of bytes specified in a Content-
Length header, if one was sent. If none was sent, the value is 0. A correctly configured server
omits this header if the transfer-encoding is "chunked", or (for older servers) if the server
closes the connection when it reaches the end of the resource.
currentSize
The number of bytes fetched from the server so far.
MORE METADATA
The dictionary returned by ::http::responseInfo is the most useful subset of the available metadata.
Other metadata include:
1. The full "status line" of the response, available as the return value of command ::http::responseLine.
2. The full response headers, available as the return value of command ::http::responseHeaders. This
return value is a list of the response-header names and values, in the order that they were received from
the server.
The return value is not a dict because some header names may occur more than once, notably Set-Cookie. If
the value is read into a dict or into an array (using array set), only the last header with each name
will be preserved.
Some of the header names (metadata keys) are listed below, but the HTTP standard defines several
more, and servers are free to add their own. When a dictionary key is mentioned below, this
refers to the dict value returned by command ::http::responseInfo.
Content-Type
The content type of the URL contents. Examples include text/html, image/gif,
application/postscript and application/x-tcl. Text values typically specify a character
set, e.g. text/html; charset=UTF-8. Dictionary key contentType.
Content-Length
The advertised size in bytes of the contents, available as dictionary key totalSize. The
actual number of bytes read by ::http::geturl so far is available as dictionary key
currentSize.
Content-Encoding
The compression algorithm used for the contents. Examples include gzip, deflate.
Dictionary key content.
Location
This header is sent when a response has status code 3XX (redirection). It provides the URL
that is the redirection target. Dictionary key redirection.
Set-Cookie
This header is sent to offer a cookie to the client. Cookie management is done by the
::http::config option -cookiejar, and so the Set-Cookie headers need not be parsed by user
scripts. See section COOKIE JAR PROTOCOL.
Connection
The value can be supplied as a comma-separated list, or by multiple headers. The list
often has only one element, either "close" or "keep-alive". The value "upgrade" indicates
a successful upgrade request and is typically combined with the status code 101, an Upgrade
response header, and no response body. Dictionary key connectionResponse.
Upgrade
The value indicates the protocol(s) to which the server will switch immediately after the
empty line that terminates the 101 response headers. Dictionary key upgrade.
EVEN MORE METADATA
1. Details of the HTTP request. The request is determined by the options supplied to ::http::geturl
and ::http::config. However, it is sometimes helpful to examine what ::http::geturl actually sent
to the server, and this information is available through commands ::http::requestHeaders and
::http::requestLine.
2. The state array: the internal variables of ::http::geturl. It may sometimes be helpful to examine
this array. Details are given in the next section.
STATE ARRAY
The ::http::geturl procedure returns a token that can be used as an argument to other ::http::* commands,
which examine and manage the state of the HTTP transaction. For most purposes these commands are
sufficient. The token can also be used to access the internal state of the transaction, which is stored
in a Tcl array. This facility is most useful when writing callback commands for the options -command,
-handler, -progress, or -queryprogress. Use the following command inside the proc to define an easy-to-
use array state as a local variable within the proc
upvar 0 $token state
Once the data associated with the URL is no longer needed, the state array should be unset to free up
storage. The ::http::cleanup procedure is provided for that purpose.
The following elements of the array are supported, and are the origin of the values returned by commands
as described below. When a dictionary key is mentioned below, this refers to the dict value returned by
command ::http::responseInfo.
binary For dictionary key binary.
body For command ::http::responseBody.
charset
For dictionary key charset.
coding For dictionary key compression.
connection
For dictionary key connectionActual.
currentsize
For command ::http::size; and for dictionary key currentSize.
error For command ::http::error; part is used in dictionary key error.
http For command ::http::responseLine.
httpResponse
For dictionary key httpResponse.
meta For command ::http::responseHeaders. Further discussion above in the section MORE METADATA.
method For dictionary key method.
posterror
For dictionary key postError.
postErrorFull
For command ::http::postError.
-protocol
For dictionary key httpRequest.
querylength
For dictionary key totalPost.
queryoffset
For dictionary key currentPost.
reasonPhrase
For dictionary key reasonPhrase.
requestHeaders
For command ::http::requestHeaders.
requestLine
For command ::http::requestLine.
responseCode
For dictionary key responseCode.
state For dictionary key stage.
status For command ::http::status; and for dictionary key status.
totalsize
For dictionary key totalSize.
transfer
For dictionary key transferEncoding.
type For dictionary key contentType.
upgrade
For dictionary key upgrade.
url For dictionary key url.
PERSISTENT CONNECTIONS
BASICS
See RFC 7230 Sec 6, which supersedes RFC 2616 Sec 8.1.
A persistent connection allows multiple HTTP/1.1 transactions to be carried over the same TCP connection.
Pipelining allows a client to make multiple requests over a persistent connection without waiting for
each response. The server sends responses in the same order that the requests were received.
If a POST request fails to complete, typically user confirmation is needed before sending the request
again. The user may wish to verify whether the server was modified by the failed POST request, before
sending the same request again.
A HTTP request will use a persistent socket if the call to http::geturl has the option -keepalive true.
It will use pipelining where permitted if the http::config option -pipeline is boolean true (its default
value).
The http package maintains no more than one persistent connection to each server (i.e. each value of
“domain:port”). If http::geturl is called to make a request over a persistent connection while the
connection is busy with another request, the new request will be held in a queue until the connection is
free.
The http package does not support HTTP/1.0 persistent connections controlled by the Keep-Alive header.
SPECIAL CASES
This subsection discusses issues related to closure of the persistent connection by the server, automatic
retry of failed requests, the special treatment necessary for POST requests, and the options for dealing
with these cases.
In accordance with RFC 7230, http::geturl does not pipeline requests that use the POST method. If a POST
uses a persistent connection and is not the first request on that connection, http::geturl waits until it
has received the response for the previous request; or (if http::config option -postfresh is boolean
true) it uses a new connection for each POST.
If the server is processing a number of pipelined requests, and sends a response header “Connection:
close” with one of the responses (other than the last), then subsequent responses are unfulfilled.
http::geturl will send the unfulfilled requests again over a new connection.
A difficulty arises when a HTTP client sends a request over a persistent connection that has been idle
for a while. The HTTP server may half-close an apparently idle connection while the client is sending a
request, but before the request arrives at the server: in this case (an “asynchronous close event”) the
request will fail. The difficulty arises because the client cannot be certain whether the POST modified
the state of the server. For HEAD or GET requests, http::geturl opens another connection and retransmits
the failed request. However, if the request was a POST, RFC 7230 forbids automatic retry by default,
suggesting either user confirmation, or confirmation by user-agent software that has semantic
understanding of the application. The http::config option -repost allows for either possibility.
Asynchronous close events can occur only in a short interval of time. The http package monitors each
persistent connection for closure by the server. Upon detection, the connection is also closed at the
client end, and subsequent requests will use a fresh connection.
If the http::geturl command is called with option -keepalive true, then it will both try to use an
existing persistent connection (if one is available), and it will send the server a “Connection: keep-
alive” request header asking to keep the connection open for future requests.
The http::config options -pipeline, -postfresh, and -repost relate to persistent connections.
Option -pipeline, if boolean true, will pipeline GET and HEAD requests made over a persistent connection.
POST requests will not be pipelined - if the POST is not the first transaction on the connection, its
request will not be sent until the previous response has finished. GET and HEAD requests made after a
POST will not be sent until the POST response has been delivered, and will not be sent if the POST fails.
Option -postfresh, if boolean true, will override the http::geturl option -keepalive, and always open a
fresh connection for a POST request.
Option -repost, if true, permits automatic retry of a POST request that fails because it uses a
persistent connection that the server has half-closed (an “asynchronous close event”). Subsequent GET
and HEAD requests in a failed pipeline will also be retried. The -repost option should be used only if
the application understands that the retry is appropriate - specifically, the application must know that
if the failed POST successfully modified the state of the server, a repeat POST would have no adverse
effect. 2
COOKIE JAR PROTOCOL 2
Cookies are short key-value pairs used to implement sessions within the otherwise-stateless HTTP 2
protocol. (See RFC 6265 for details; Tcl does not implement the Cookie2 protocol as that is rarely seen 2
in the wild.) 2
Cookie storage management commands — “cookie jars” — must support these subcommands which form the HTTP 2
cookie storage management protocol. Note that cookieJar below does not have to be a command name; it is 2
properly a command prefix (a Tcl list of words that will be expanded in place) and admits many possible 2
implementations. 2
Though not formally part of the protocol, it is expected that particular values of cookieJar will 2
correspond to sessions; it is up to the caller of ::http::config to decide what session applies and to 2
manage the deletion of said sessions when they are no longer desired (which should be when they not 2
configured as the current cookie jar). 2
cookieJar getCookies protocol host requestPath 2
This command asks the cookie jar what cookies should be supplied for a particular request. It 2
should take the protocol (typically http or https), host name and requestPath (parsed from the url 2
argument to ::http::geturl) and return a list of cookie keys and values that describe the cookies 2
to supply to the remote host. The list must have an even number of elements. 2
There should only ever be at most one cookie with a particular key for any request (typically the 2
one with the most specific host/domain match and most specific requestPath/path match), but there 2
may be many cookies with different names in any request. 2
cookieJar storeCookie cookieDictionary 2
This command asks the cookie jar to store a particular cookie that was returned by a request; the 2
result of this command is ignored. The cookie (which will have been parsed by the http package) is 2
described by a dictionary, cookieDictionary, that may have the following keys: 2
domain 2
This is always present. Its value describes the domain hostname or prefix that the cookie 2
should be returned for. The checking of the domain against the origin (below) should be 2
careful since sites that issue cookies should only do so for domains related to themselves. 2
Cookies that do not obey a relevant origin matching rule should be ignored. 2
expires 2
This is optional. If present, the cookie is intended to be a persistent cookie and the 2
value of the option is the Tcl timestamp (in seconds from the same base as clock seconds) 2
of when the cookie expires (which may be in the past, which should result in the cookie 2
being deleted immediately). If absent, the cookie is intended to be a session cookie that 2
should be not persisted beyond the lifetime of the cookie jar. 2
hostonly 2
This is always present. Its value is a boolean that describes whether the cookie is a 2
single host cookie (true) or a domain-level cookie (false). 2
httponly 2
This is always present. Its value is a boolean that is true when the site wishes the cookie 2
to only ever be used with HTTP (or HTTPS) traffic. 2
key 2
This is always present. Its value is the key of the cookie, which is part of the 2
information that must be return when sending this cookie back in a future request. 2
origin 2
This is always present. Its value describes where the http package believes it received the 2
cookie from, which may be useful for checking whether the cookie's domain is valid. 2
path 2
This is always present. Its value describes the path prefix of requests to the cookie 2
domain where the cookie should be returned. 2
secure 2
This is always present. Its value is a boolean that is true when the cookie should only 2
used on requests sent over secure channels (typically HTTPS). 2
value 2
This is always present. Its value is the value of the cookie, which is part of the 2
information that must be return when sending this cookie back in a future request. 2
Other keys may always be ignored; they have no meaning in this protocol. 2
PROTOCOL UPGRADES
The HTTP/1.1 Connection and Upgrade request headers inform the server that the client wishes to change
the protocol used over the existing connection (RFC 7230). This mechanism can be used to request a
WebSocket (RFC 6455), a higher version of the HTTP protocol (HTTP 2), or TLS encryption. If the server
accepts the upgrade request, its response code will be 101.
To request a protocol upgrade when calling http::geturl, the -headers option must supply appropriate
values for Connection and Upgrade, and the -command option must supply a command that implements the
requested protocol and can also handle the server response if the server refuses the protocol upgrade.
For upgrade requests http::geturl ignores the value of option -keepalive, and always uses the value 0 so
that the upgrade request is not made over a connection that is intended for multiple HTTP requests.
The Tcllib library websocket implements WebSockets, and makes the necessary calls to commands in the http
package.
There is currently no native Tcl client library for HTTP/2.
The Upgrade mechanism is not used to request TLS in web browsers, because http and https are served over
different ports. It is used by protocols such as Internet Printing Protocol (IPP) that are built on top
of http(s) and use the same TCP port number for both secure and insecure traffic.
In browsers, opportunistic encryption is instead implemented by the Upgrade-Insecure-Requests client
header. If a secure service is available, the server response code is a 307 redirect, and the response
header Location specifies the target URL. The browser must call http::geturl again in order to fetch
this URL. See https://w3c.github.io/webappsec-upgrade-insecure-requests/
THREADS
PURPOSE
Command ::http::geturl uses the Tcl ::socket command with the -async option to connect to a remote
server, but the return from this command can be delayed in adverse cases (e.g. a slow DNS lookup),
preventing the event loop from processing other events. This delay is avoided if the ::socket command is
evaluated in another thread. The Thread package is not part of Tcl but is provided in "Batteries
Included" distributions. Instead of the ::socket command, the http package uses ::http::socket which
makes connections in the manner specified by the value of -threadlevel and the availability of package
Thread.
WITH TLS (HTTPS)
The same -threadlevel configuration applies to both HTTP and HTTPS connections. HTTPS is enabled by
using the http::register command, typically by specifying the ::tls::socket command of the tls package to
handle TLS cryptography. The ::tls::socket command connects to the remote server by using the command
specified by the value of variable ::tls::socketCmd, and this value defaults to "::socket". If
http::geturl finds that ::tls::socketCmd has this value, it replaces it with the value "::http::socket".
If ::tls::socketCmd has a value other than "::socket", i.e. if the script or the Tcl installation has
replaced the value "::socket" with the name of a different command, then http does not change the value.
The script or installation that modified ::tls::socketCmd is responsible for integrating ::http::socket
into its own replacement command.
WITH A CHILD INTERPRETER
The peer thread can transfer the socket only to the main interpreter of the script's thread. Therefore
the thread-based ::http::socket works with non-zero -threadlevel values only if the script runs in the
main interpreter. A child interpreter must use -threadlevel 0 unless the parent interpreter has provided
alternative facilities. The main parent interpreter may grant full -threadlevel facilities to a child
interpreter, for example by aliasing, to ::http::socket in the child, a command that runs http::socket in
the parent, and then transfers the socket to the child.
EXAMPLE
This example creates a procedure to copy a URL to a file while printing a progress meter, and prints the
response headers associated with the URL.
proc httpcopy { url file {chunk 4096} } {
set out [open $file w]
set token [::http::geturl $url -channel $out \
-progress httpCopyProgress -blocksize $chunk]
close $out
# This ends the line started by httpCopyProgress
puts stderr ""
upvar 0 $token state
set max 0
foreach {name value} $state(meta) {
if {[string length $name] > $max} {
set max [string length $name]
}
if {[regexp -nocase ^location$ $name]} {
# Handle URL redirects
puts stderr "Location:$value"
return [httpcopy [string trim $value] $file $chunk]
}
}
incr max
foreach {name value} $state(meta) {
puts [format "%-*s %s" $max $name: $value]
}
return $token
}
proc httpCopyProgress {args} {
puts -nonewline stderr .
flush stderr
}
SEE ALSO
safe(3tcl), socket(3tcl), safesock(3tcl)
KEYWORDS
internet, security policy, socket, www
http 2.10 http(3tcl)