Provided by: pcs_0.12.1-2ubuntu1_all 
NAME
pcs - pacemaker/corosync configuration system
SYNOPSIS
pcs [-f file] [-h] [commands]...
DESCRIPTION
Control and configure pacemaker and corosync.
OPTIONS
-h, --help
Display usage and exit.
-f file
Perform actions on file instead of active CIB.
Commands supporting the option use the initial state of the specified file as their input and then
overwrite the file with the state reflecting the requested operation(s).
A few commands only use the specified file in read-only mode since their effect is not a CIB
modification.
--debug
Print all network traffic and external commands run.
--version
Print pcs version information. List pcs capabilities if --full is specified.
--request-timeout=<timeout>
Timeout for each outgoing request to another node in seconds. Default is 60s.
Commands:
cluster
Configure cluster options and nodes.
resource
Manage cluster resources.
stonith
Manage fence devices.
constraint
Manage resource constraints.
property
Manage pacemaker properties.
acl
Manage pacemaker access control lists.
qdevice
Manage quorum device provider on the local host.
quorum
Manage cluster quorum settings.
booth
Manage booth (cluster ticket manager).
status
View cluster status.
config
View and manage cluster configuration.
pcsd
Manage pcs daemon.
host
Manage hosts known to pcs/pcsd.
node
Manage cluster nodes.
alert
Manage pacemaker alerts.
client
Manage pcsd client configuration.
dr
Manage disaster recovery configuration.
tag
Manage pacemaker tags.
resource
[status [<resource id | tag id>] [node=<node>] [--hide-inactive]]
Show status of all currently configured resources. If --hide-inactive is specified, only show
active resources. If a resource or tag id is specified, only show status of the specified resource
or resources in the specified tag. If node is specified, only show status of resources configured
for the specified node.
config [--output-format text|cmd|json] [<resource id>]...
Show options of all currently configured resources or if resource ids are specified show the
options for the specified resource ids. There are 3 formats of output available: 'cmd', 'json' and
'text', default is 'text'. Format 'text' is a human friendly output. Format 'cmd' prints pcs
commands which can be used to recreate the same configuration. Format 'json' is a machine oriented
output of the configuration.
list [filter] [--nodesc]
Show list of all available resource agents (if filter is provided then only resource agents
matching the filter will be shown). If --nodesc is used then descriptions of resource agents are
not printed.
describe [<standard>:[<provider>:]]<type> [--full]
Show options for the specified resource. If --full is specified, all options including advanced
and deprecated ones are shown.
create <resource id> [<standard>:[<provider>:]]<type> [<resource options>] [op <operation action>
<operation options> [<operation action> <operation options>]...] [meta <meta options>] [clone [<clone
id>] [<clone meta options>] | promotable [<clone id>] [<promotable meta options>] | --group <group id>
[--before <resource id> | --after <resource id>] | bundle <bundle id>] [--disabled] [--agent-validation]
[--no-default-ops] [--wait[=n]]
create --future <resource id> [<standard>:[<provider>:]]<type> [<resource options>] [op <operation
action> <operation options> [<operation action> <operation options>]...] [meta <meta options>] [clone
[<clone id>] [meta <clone meta options>] | promotable [<clone id>] [meta <promotable meta options>] |
group <group id> [before <resource id> | after <resource id>] | bundle <bundle id>] [--disabled]
[--agent-validation] [--no-default-ops] [--wait[=n]]
Create specified resource.
If clone is used, a clone resource is created. If promotable is used, a promotable clone resource
is created.
If --group is specified, the resource is added to the group named. You can use --before or --after
to specify the position of the added resource relatively to some resource already existing in the
group.
If bundle is specified, resource will be created inside of the specified bundle.
If --disabled is specified, the resource is not started automatically.
If --agent-validation is specified, resource agent validate-all action will be used to validate
resource options and will prevent creating a misconfigured resource. If --agent-validation is not
specified, the validation will be done anyway, but it will only produce warnings not preventing
the resource from being created.
If --no-default-ops is specified, only monitor operations are created for the resource and all
other operations use default settings.
If --wait is specified, pcs will wait up to 'n' seconds for the resource to start and then return
0 if the resource is started, or 1 if the resource has not yet started. If 'n' is not specified it
defaults to 60 minutes.
Specifying --future switches to the new command format that changes the way clone and promotable
meta options are expected to be specified.
Example: Create a new resource called 'VirtualIP' with IP address 192.168.0.99, netmask of 32,
monitored everything 30 seconds, on eth2:
pcs resource create VirtualIP ocf:heartbeat:IPaddr2 ip=192.168.0.99 cidr_netmask=32 nic=eth2 op
monitor interval=30s
delete <resource id|group id|bundle id|clone id>...
Deletes the specified resources, groups, bundles or clones (and all resources within the
groups/bundles/clones).
remove <resource id|group id|bundle id|clone id>...
Deletes the specified resources, groups, bundles or clones (and all resources within the
groups/bundles/clones).
enable <resource id | tag id>... [--wait[=n]]
Allow the cluster to start the resources. Depending on the rest of the configuration (constraints,
options, failures, etc), the resources may remain stopped. If --wait is specified, pcs will wait
up to 'n' seconds for the resources to start and then return 0 if the resources are started, or 1
if the resources have not yet started. If 'n' is not specified it defaults to 60 minutes.
disable <resource id | tag id>... [--safe [--brief] [--no-strict]] [--simulate [--brief]] [--wait[=n]]
Attempt to stop the resources if they are running and forbid the cluster from starting them again.
Depending on the rest of the configuration (constraints, options, failures, etc), the resources
may remain started.
If --safe is specified, no changes to the cluster configuration will be made if other than
specified resources would be affected in any way. If --brief is also specified, only errors are
printed.
If --no-strict is specified, no changes to the cluster configuration will be made if other than
specified resources would get stopped or demoted. Moving resources between nodes is allowed.
If --simulate is specified, no changes to the cluster configuration will be made and the effect of
the changes will be printed instead. If --brief is also specified, only a list of affected
resources not specified in the command will be printed.
If --wait is specified, pcs will wait up to 'n' seconds for the resources to stop and then return
0 if the resources are stopped or 1 if the resources have not stopped. If 'n' is not specified it
defaults to 60 minutes.
safe-disable <resource id | tag id>... [--brief] [--no-strict] [--simulate [--brief]] [--wait[=n]]
[--force]
Attempt to stop the resources if they are running and forbid the cluster from starting them again.
Depending on the rest of the configuration (constraints, options, failures, etc), the resources
may remain started. No changes to the cluster configuration will be made if other than specified
resources would be affected in any way.
If --brief is specified, only errors are printed.
If --no-strict is specified, no changes to the cluster configuration will be made if other than
specified resources would get stopped or demoted. Moving resources between nodes is allowed.
If --simulate is specified, no changes to the cluster configuration will be made and the effect of
the changes will be printed instead. If --brief is also specified, only a list of affected
resources not specified in the command will be printed.
If --wait is specified, pcs will wait up to 'n' seconds for the resources to stop and then return
0 if the resources are stopped or 1 if the resources have not stopped. If 'n' is not specified it
defaults to 60 minutes.
If --force is specified, checks for safe disable will be skipped.
restart <resource id> [node] [--wait=n]
Restart the resource specified. If a node is specified and if the resource is a clone or bundle it
will be restarted only on the node specified. If --wait is specified, then we will wait up to 'n'
seconds for the resource to be restarted and return 0 if the restart was successful or 1 if it was
not.
debug-start <resource id> [--full]
This command will force the specified resource to start on this node ignoring the cluster
recommendations and print the output from starting the resource. Using --full will give more
detailed output. This is mainly used for debugging resources that fail to start.
debug-stop <resource id> [--full]
This command will force the specified resource to stop on this node ignoring the cluster
recommendations and print the output from stopping the resource. Using --full will give more
detailed output. This is mainly used for debugging resources that fail to stop.
debug-promote <resource id> [--full]
This command will force the specified resource to be promoted on this node ignoring the cluster
recommendations and print the output from promoting the resource. Using --full will give more
detailed output. This is mainly used for debugging resources that fail to promote.
debug-demote <resource id> [--full]
This command will force the specified resource to be demoted on this node ignoring the cluster
recommendations and print the output from demoting the resource. Using --full will give more
detailed output. This is mainly used for debugging resources that fail to demote.
debug-monitor <resource id> [--full]
This command will force the specified resource to be monitored on this node ignoring the cluster
recommendations and print the output from monitoring the resource. Using --full will give more
detailed output. This is mainly used for debugging resources that fail to be monitored.
move <resource id> [destination node] [--promoted] [--strict] [--wait[=n]]
Move the resource off the node it is currently running on. This is achieved by creating a
-INFINITY location constraint to ban the node. If destination node is specified the resource will
be moved to that node by creating an INFINITY location constraint to prefer the destination node.
The constraint needed for moving the resource will be automatically removed once the resource is
running on its new location. The command will fail in case it is not possible to verify that the
resource will not be moved back after deleting the constraint. If this happens after the location
constraint has been created, the constraint will be left in the configuration.
If --strict is specified, the command will also fail if other resources would be affected.
If --promoted is used the scope of the command is limited to the Promoted role and promotable
clone id must be used (instead of the resource id).
If --wait is specified, pcs will wait up to 'n' seconds for the resource to move and then return 0
on success or 1 on error. If 'n' is not specified it defaults to 60 minutes.
NOTE: This command has been changed in pcs-0.11. It is equivalent to command 'resource move
<resource id> --autodelete' from pcs-0.10.9. Legacy functionality of the 'resource move' command
is still available as 'resource move-with-constraint <resource id>'.
If you want the resource to preferably avoid running on some nodes but be able to failover to them
use 'pcs constraint location avoids'.
move-with-constraint <resource id> [destination node] [lifetime=<lifetime>] [--promoted] [--wait[=n]]
Move the resource off the node it is currently running on by creating a -INFINITY location
constraint to ban the node. If destination node is specified the resource will be moved to that
node by creating an INFINITY location constraint to prefer the destination node.
If lifetime is specified then the constraint will expire after that time, otherwise it defaults to
infinity and the constraint can be cleared manually with 'pcs resource clear' or 'pcs constraint
delete'. Lifetime is expected to be specified as ISO 8601 duration (see
https://en.wikipedia.org/wiki/ISO_8601#Durations).
If --promoted is used the scope of the command is limited to the Promoted role and promotable
clone id must be used (instead of the resource id).
If --wait is specified, pcs will wait up to 'n' seconds for the resource to move and then return 0
on success or 1 on error. If 'n' is not specified it defaults to 60 minutes.
If you want the resource to preferably avoid running on some nodes but be able to failover to them
use 'pcs constraint location avoids'.
ban <resource id> [node] [--promoted] [lifetime=<lifetime>] [--wait[=n]]
Prevent the resource id specified from running on the node (or on the current node it is running
on if no node is specified) by creating a -INFINITY location constraint.
If --promoted is used the scope of the command is limited to the Promoted role and promotable
clone id must be used (instead of the resource id).
If lifetime is specified then the constraint will expire after that time, otherwise it defaults to
infinity and the constraint can be cleared manually with 'pcs resource clear' or 'pcs constraint
delete'. Lifetime is expected to be specified as ISO 8601 duration (see
https://en.wikipedia.org/wiki/ISO_8601#Durations).
If --wait is specified, pcs will wait up to 'n' seconds for the resource to move and then return 0
on success or 1 on error. If 'n' is not specified it defaults to 60 minutes.
If you want the resource to preferably avoid running on some nodes but be able to failover to them
use 'pcs constraint location avoids'.
clear <resource id> [node] [--promoted] [--expired] [--wait[=n]]
Remove constraints created by move and/or ban on the specified resource (and node if specified).
If --promoted is used the scope of the command is limited to the Promoted role and promotable
clone id must be used (instead of the resource id).
If --expired is specified, only constraints with expired lifetimes will be removed.
If --wait is specified, pcs will wait up to 'n' seconds for the operation to finish (including
starting and/or moving resources if appropriate) and then return 0 on success or 1 on error. If
'n' is not specified it defaults to 60 minutes.
standards
List available resource agent standards supported by this installation (OCF, LSB, etc.).
providers
List available OCF resource agent providers.
agents [standard[:provider]]
List available agents optionally filtered by standard and provider.
update <resource id> [resource options] [op [<operation action> <operation options>]...] [meta <meta
options>] [--agent-validation] [--wait[=n]]
Add, remove or change options of specified resource, clone or multi-state resource. Unspecified
options will be kept unchanged. If you wish to remove an option, set it to empty value, i.e.
'option_name='.
If an operation (op) is specified it will update the first found operation with the same action on
the specified resource. If no operation with that action exists then a new operation will be
created. (WARNING: all existing options on the updated operation will be reset if not specified.)
If you want to create multiple monitor operations you should use the 'op add' & 'op remove'
commands.
If --agent-validation is specified, resource agent validate-all action will be used to validate
resource options and will prevent creating a misconfigured resource. If --agent-validation is not
specified, the validation will be done anyway, but it will only produce warnings not preventing
the resource from being updated.
If --wait is specified, pcs will wait up to 'n' seconds for the changes to take effect and then
return 0 if the changes have been processed or 1 otherwise. If 'n' is not specified it defaults to
60 minutes.
op add <resource id> <operation action> [operation properties]
Add operation for specified resource.
op delete <resource id> <operation action> [<operation properties>...]
Remove specified operation (note: you must specify the exact operation properties to properly
remove an existing operation).
op delete <operation id>
Remove the specified operation id.
op remove <resource id> <operation action> [<operation properties>...]
Remove specified operation (note: you must specify the exact operation properties to properly
remove an existing operation).
op remove <operation id>
Remove the specified operation id.
op defaults [config] [--all | --no-check-expired] [--full] [--output-format text|cmd|json]
List currently configured default values for operations. If --all is specified, also list expired
sets of values. If --full is specified, also list ids. If --no-expire-check is specified, do not
evaluate whether sets of values are expired. There are 3 formats of output available: 'cmd',
'json' and 'text', default is 'text'. Format 'text' is a human friendly output. Format 'cmd'
prints pcs commands which can be used to recreate the same configuration. Format 'json' is a
machine oriented output of the configuration.
op defaults <name>=<value>...
Set default values for operations.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
op defaults set create [<set options>] [meta [<name>=<value>]...] [rule [<expression>]]
Create a new set of default values for resource / stonith device operations. You may specify a
rule describing resources / stonith devices and / or operations to which the set applies.
Set options are: id, score
Expression looks like one of the following:
op <operation name> [interval=<interval>]
resource [<standard>]:[<provider>]:[<type>]
defined|not_defined <node attribute>
<node attribute> lt|gt|lte|gte|eq|ne [string|integer|number|version] <value>
date gt|lt <date>
date in_range [<date>] to <date>
date in_range <date> to duration <duration options>
date-spec <date-spec options>
<expression> and|or <expression>
(<expression>)
You may specify all or any of 'standard', 'provider' and 'type' in a resource expression. For
example: 'resource ocf::' matches all resources of 'ocf' standard, while 'resource ::Dummy'
matches all resources of 'Dummy' type regardless of their standard and provider.
Dates are expected to conform to ISO 8601 format.
Duration options are: years, months, weeks, days, hours, minutes, seconds. Value for these options
is an integer.
Date-spec options are: years, weekyears, months, weeks, yeardays, monthdays, weekdays, hours,
minutes, seconds. Value for these options is an integer or a range written as integer-integer.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
op defaults set delete [<set id>]...
Delete specified options sets.
op defaults set remove [<set id>]...
Delete specified options sets.
op defaults set update <set id> [meta [<name>=<value>]...]
Add, remove or change values in specified set of default values for resource / stonith device
operations. Unspecified options will be kept unchanged. If you wish to remove an option, set it to
empty value, i.e. 'option_name='.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
op defaults update <name>=<value>...
Add, remove or change default values for operations. This is a simplified command useful for cases
when you only manage one set of default values. Unspecified options will be kept unchanged. If you
wish to remove an option, set it to empty value, i.e. 'option_name='.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
meta <resource id> <meta options> [--wait[=n]]
Add specified options to the specified resource. Meta options should be in the format of
name=value, options may be removed by setting an option without a value. If --wait is specified,
pcs will wait up to 'n' seconds for the changes to take effect and then return 0 if the changes
have been processed or 1 otherwise. If 'n' is not specified it defaults to 60 minutes.
Example: pcs resource meta TestResource failure-timeout=50 resource-stickiness=
group list
Show all currently configured resource groups and their resources.
group add <group id> <resource id> [resource id] ... [resource id] [--before <resource id> | --after
<resource id>] [--wait[=n]]
Add the specified resource to the group, creating the group if it does not exist. If the resource
is present in another group it is moved to the new group. If the group remains empty after move,
it is deleted (for cloned groups, the clone is deleted as well). The delete operation may fail in
case the group is referenced within the configuration, e.g. by constraints. In that case, use 'pcs
resource ungroup' command prior to moving all resources out of the group.
You can use --before or --after to specify the position of the added resources relatively to some
resource already existing in the group. By adding resources to a group they are already in and
specifying --after or --before you can move the resources in the group.
If --wait is specified, pcs will wait up to 'n' seconds for the operation to finish (including
moving resources if appropriate) and then return 0 on success or 1 on error. If 'n' is not
specified it defaults to 60 minutes.
group delete <group id> [resource id]... [--wait[=n]]
Remove the group (note: this does not remove any resources from the cluster) or if resources are
specified, remove the specified resources from the group. If --wait is specified, pcs will wait
up to 'n' seconds for the operation to finish (including moving resources if appropriate) and the
return 0 on success or 1 on error. If 'n' is not specified it defaults to 60 minutes.
group remove <group id> [resource id]... [--wait[=n]]
Remove the group (note: this does not remove any resources from the cluster) or if resources are
specified, remove the specified resources from the group. If --wait is specified, pcs will wait
up to 'n' seconds for the operation to finish (including moving resources if appropriate) and the
return 0 on success or 1 on error. If 'n' is not specified it defaults to 60 minutes.
ungroup <group id> [resource id]... [--wait[=n]]
Remove the group (note: this does not remove any resources from the cluster) or if resources are
specified, remove the specified resources from the group. If --wait is specified, pcs will wait
up to 'n' seconds for the operation to finish (including moving resources if appropriate) and the
return 0 on success or 1 on error. If 'n' is not specified it defaults to 60 minutes.
clone <resource id | group id> [<clone id>] [meta <clone meta options>] [--wait[=n]]
Set up the specified resource or group as a clone. If --wait is specified, pcs will wait up to 'n'
seconds for the operation to finish (including starting clone instances if appropriate) and then
return 0 on success or 1 on error. If 'n' is not specified it defaults to 60 minutes.
promotable <resource id | group id> [<clone id>] [meta <clone meta options>] [--wait[=n]]
Set up the specified resource or group as a promotable clone. This is an alias for 'pcs resource
clone <resource id> promotable=true'.
unclone <clone id | resource id | group id> [--wait[=n]]
Remove the specified clone or the clone which contains the specified group or resource (the
resource or group will not be removed). If --wait is specified, pcs will wait up to 'n' seconds
for the operation to finish (including stopping clone instances if appropriate) and then return 0
on success or 1 on error. If 'n' is not specified it defaults to 60 minutes.
bundle create <bundle id> container <container type> [<container options>] [network <network options>]
[port-map <port options>]... [storage-map <storage options>]... [meta <meta options>] [--disabled]
[--wait[=n]]
Create a new bundle encapsulating no resources. The bundle can be used either as it is or a
resource may be put into it at any time. If --disabled is specified, the bundle is not started
automatically. If --wait is specified, pcs will wait up to 'n' seconds for the bundle to start and
then return 0 on success or 1 on error. If 'n' is not specified it defaults to 60 minutes.
bundle reset <bundle id> [container <container options>] [network <network options>] [port-map <port
options>]... [storage-map <storage options>]... [meta <meta options>] [--disabled] [--wait[=n]]
Configure specified bundle with given options. Unlike bundle update, this command resets the
bundle according given options - no previous options are kept. Resources inside the bundle are
kept as they are. If --disabled is specified, the bundle is not started automatically. If --wait
is specified, pcs will wait up to 'n' seconds for the bundle to start and then return 0 on success
or 1 on error. If 'n' is not specified it defaults to 60 minutes.
bundle update <bundle id> [container <container options>] [network <network options>] [port-map (add
<port options>) | (delete | remove <id>...)]... [storage-map (add <storage options>) | (delete | remove
<id>...)]... [meta <meta options>] [--wait[=n]]
Add, remove or change options of specified bundle. Unspecified options will be kept unchanged. If
you wish to remove an option, set it to empty value, i.e. 'option_name='.
If you wish to update a resource encapsulated in the bundle, use the 'pcs resource update' command
instead and specify the resource id.
If --wait is specified, pcs will wait up to 'n' seconds for the operation to finish (including
moving resources if appropriate) and then return 0 on success or 1 on error. If 'n' is not
specified it defaults to 60 minutes.
manage <resource id | tag id>... [--monitor]
Set resources listed to managed mode (default). If --monitor is specified, enable all monitor
operations of the resources.
unmanage <resource id | tag id>... [--monitor]
Set resources listed to unmanaged mode. When a resource is in unmanaged mode, the cluster is not
allowed to start nor stop the resource. If --monitor is specified, disable all monitor operations
of the resources.
defaults [config] [--all | --no-check-expired] [--full] [--output-format text|cmd|json]
List currently configured default values for resources / stonith devices. If --all is specified,
also list expired sets of values. If --full is specified, also list ids. If --no-expire-check is
specified, do not evaluate whether sets of values are expired. There are 3 formats of output
available: 'cmd', 'json' and 'text', default is 'text'. Format 'text' is a human friendly output.
Format 'cmd' prints pcs commands which can be used to recreate the same configuration. Format
'json' is a machine oriented output of the configuration.
defaults <name>=<value>...
Set default values for resources / stonith devices.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
defaults set create [<set options>] [meta [<name>=<value>]...] [rule [<expression>]]
Create a new set of default values for resources / stonith devices. You may specify a rule
describing resources / stonith devices to which the set applies.
Set options are: id, score
Expression looks like one of the following:
resource [<standard>]:[<provider>]:[<type>]
date gt|lt <date>
date in_range [<date>] to <date>
date in_range <date> to duration <duration options>
date-spec <date-spec options>
<expression> and|or <expression>
(<expression>)
You may specify all or any of 'standard', 'provider' and 'type' in a resource expression. For
example: 'resource ocf::' matches all resources of 'ocf' standard, while 'resource ::Dummy'
matches all resources of 'Dummy' type regardless of their standard and provider.
Dates are expected to conform to ISO 8601 format.
Duration options are: years, months, weeks, days, hours, minutes, seconds. Value for these options
is an integer.
Date-spec options are: years, weekyears, months, weeks, yeardays, monthdays, weekdays, hours,
minutes, seconds. Value for these options is an integer or a range written as integer-integer.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
defaults set delete [<set id>]...
Delete specified options sets.
defaults set remove [<set id>]...
Delete specified options sets.
defaults set update <set id> [meta [<name>=<value>]...]
Add, remove or change values in specified set of default values for resources / stonith devices.
Unspecified options will be kept unchanged. If you wish to remove an option, set it to empty
value, i.e. 'option_name='.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
defaults update <name>=<value>...
Add, remove or change default values for resources / stonith devices. This is a simplified command
useful for cases when you only manage one set of default values. Unspecified options will be kept
unchanged. If you wish to remove an option, set it to empty value, i.e. 'option_name='.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
cleanup [<resource id | stonith id>] [node=<node>] [operation=<operation> [interval=<interval>]]
[--strict]
Make the cluster forget failed operations from history of the resource / stonith device and
re-detect its current state. This can be useful to purge knowledge of past failures that have
since been resolved.
If the named resource is part of a group, or one numbered instance of a clone or bundled resource,
the clean-up applies to the whole collective resource unless --strict is given.
If a resource id / stonith id is not specified then all resources / stonith devices will be
cleaned up.
If a node is not specified then resources / stonith devices on all nodes will be cleaned up.
refresh [<resource id | stonith id>] [node=<node>] [--strict]
Make the cluster forget the complete operation history (including failures) of the resource /
stonith device and re-detect its current state. If you are interested in forgetting failed
operations only, use the 'pcs resource cleanup' command.
If the named resource is part of a group, or one numbered instance of a clone or bundled resource,
the refresh applies to the whole collective resource unless --strict is given.
If a resource id / stonith id is not specified then all resources / stonith devices will be
refreshed.
If a node is not specified then resources / stonith devices on all nodes will be refreshed.
failcount [show [<resource id | stonith id>] [node=<node>] [operation=<operation> [interval=<interval>]]]
[--full]
Show current failcount for resources and stonith devices, optionally filtered by a resource /
stonith device, node, operation and its interval. If --full is specified do not sum failcounts per
resource / stonith device and node. Use 'pcs resource cleanup' or 'pcs resource refresh' to reset
failcounts.
relocate dry-run [resource1] [resource2] ...
The same as 'relocate run' but has no effect on the cluster.
relocate run [resource1] [resource2] ...
Relocate specified resources to their preferred nodes. If no resources are specified, relocate
all resources. This command calculates the preferred node for each resource while ignoring
resource stickiness. Then it creates location constraints which will cause the resources to move
to their preferred nodes. Once the resources have been moved the constraints are deleted
automatically. Note that the preferred node is calculated based on current cluster status,
constraints, location of resources and other settings and thus it might change over time.
relocate show
Display current status of resources and their optimal node ignoring resource stickiness.
relocate clear
Remove all constraints created by the 'relocate run' command.
utilization [<resource id> [<name>=<value> ...]]
Add specified utilization options to specified resource. If resource is not specified, shows
utilization of all resources. If utilization options are not specified, shows utilization of
specified resource. Utilization option should be in format name=value, value has to be integer.
Options may be removed by setting an option without a value. Example: pcs resource utilization
TestResource cpu= ram=20 For the utilization configuration to be in effect, cluster property
'placement-strategy' must be configured accordingly.
relations <resource id> [--full]
Display relations of a resource specified by its id with other resources in a tree structure.
Supported types of resource relations are: ordering constraints, ordering set constraints,
relations defined by resource hierarchy (clones, groups, bundles). If --full is used, more verbose
output will be printed.
cluster
setup <cluster name> (<node name> [addr=<node address>]...)... [transport knet|udp|udpu [<transport
options>] [link <link options>]... [compression <compression options>] [crypto <crypto options>]] [totem
<totem options>] [quorum <quorum options>] [--no-cluster-uuid] ([--enable] [--start [--wait[=<n>]]]
[--no-keys-sync]) | [--corosync_conf <path>]
Create a cluster from the listed nodes and synchronize cluster configuration files to them. If
--corosync_conf is specified, do not connect to other nodes and save corosync.conf to the
specified path; see 'Local only mode' below for details.
Nodes are specified by their names and optionally their addresses. If no addresses are specified
for a node, pcs will configure corosync to communicate with that node using an address provided in
'pcs host auth' command. Otherwise, pcs will configure corosync to communicate with the node using
the specified addresses.
Transport knet:
This is the default transport. It allows configuring traffic encryption and compression as well as
using multiple addresses (links) for nodes.
Transport options are: ip_version, knet_pmtud_interval, link_mode
Link options are: link_priority, linknumber, mcastport, ping_interval, ping_precision,
ping_timeout, pong_count, transport (udp or sctp)
Each 'link' followed by options sets options for one link in the order the links are defined by
nodes' addresses. You can set link options for a subset of links using a linknumber. See examples
below.
Compression options are: level, model, threshold
Crypto options are: cipher, hash, model
By default, encryption is enabled with cipher=aes256 and hash=sha256. To disable encryption, set
cipher=none and hash=none.
Transports udp and udpu:
These transports are limited to one address per node. They do not support traffic encryption nor
compression.
Transport options are: ip_version, netmtu
Link options are: bindnetaddr, broadcast, mcastaddr, mcastport, ttl
Totem and quorum can be configured regardless of used transport.
Totem options are: block_unlisted_ips, consensus, downcheck, fail_recv_const,
heartbeat_failures_allowed, hold, join, max_messages, max_network_delay, merge, miss_count_const,
send_join, seqno_unchanged_const, token, token_coefficient, token_retransmit,
token_retransmits_before_loss_const, window_size
Quorum options are: auto_tie_breaker, last_man_standing, last_man_standing_window, wait_for_all
Transports and their options, link, compression, crypto and totem options are all documented in
corosync.conf(5) man page; knet link options are prefixed 'knet_' there, compression options are
prefixed 'knet_compression_' and crypto options are prefixed 'crypto_'. Quorum options are
documented in votequorum(5) man page.
--no-cluster-uuid will not generate a unique ID for the cluster. --enable will configure the
cluster to start on nodes boot. --start will start the cluster right after creating it. --wait
will wait up to 'n' seconds for the cluster to start. --no-keys-sync will skip creating and
distributing pcsd SSL certificate and key and corosync and pacemaker authkey files. Use this if
you provide your own certificates and keys.
Local only mode:
By default, pcs connects to all specified nodes to verify they can be used in the new cluster and
to send cluster configuration files to them. If this is not what you want, specify --corosync_conf
option followed by a file path. Pcs will save corosync.conf to the specified file and will not
connect to cluster nodes. These are the tasks that pcs skips in that case:
* make sure the nodes are not running or configured to run a cluster already
* make sure cluster packages are installed on all nodes and their versions are compatible
* make sure there are no cluster configuration files on any node (run 'pcs cluster destroy' and
remove pcs_settings.conf file on all nodes)
* synchronize corosync and pacemaker authkeys, /etc/corosync/authkey and /etc/pacemaker/authkey
respectively, and the corosync.conf file
* authenticate the cluster nodes against each other ('pcs cluster auth' or 'pcs host auth'
command)
* synchronize pcsd certificates (so that pcs web UI can be used in an HA mode)
Examples:
Create a cluster with default settings:
pcs cluster setup newcluster node1 node2
Create a cluster using two links:
pcs cluster setup newcluster node1 addr=10.0.1.11 addr=10.0.2.11 node2 addr=10.0.1.12
addr=10.0.2.12
Set link options for all links. Link options are matched to the links in order. The first link
(link 0) has sctp transport, the second link (link 1) has mcastport 55405:
pcs cluster setup newcluster node1 addr=10.0.1.11 addr=10.0.2.11 node2 addr=10.0.1.12
addr=10.0.2.12 transport knet link transport=sctp link mcastport=55405
Set link options for the second and fourth links only. Link options are matched to the links based
on the linknumber option (the first link is link 0):
pcs cluster setup newcluster node1 addr=10.0.1.11 addr=10.0.2.11 addr=10.0.3.11 addr=10.0.4.11
node2 addr=10.0.1.12 addr=10.0.2.12 addr=10.0.3.12 addr=10.0.4.12 transport knet link linknumber=3
mcastport=55405 link linknumber=1 transport=sctp
Create a cluster using udp transport with a non-default port:
pcs cluster setup newcluster node1 node2 transport udp link mcastport=55405
config [show] [--output-format text|cmd|json] [--corosync_conf <path>]
Show cluster configuration. There are 3 formats of output available: 'cmd', 'json' and 'text',
default is 'text'. Format 'text' is a human friendly output. Format 'cmd' prints pcs commands
which can be used to recreate the same configuration. Format 'json' is a machine oriented output
of the configuration. If --corosync_conf is specified, configuration file specified by <path> is
used instead of the current cluster configuration.
config update [transport <transport options>] [compression <compression options>] [crypto <crypto
options>] [totem <totem options>] [--corosync_conf <path>]
Update cluster configuration. Unspecified options will be kept unchanged. If you wish to remove an
option, set it to empty value, i.e. 'option_name='.
If --corosync_conf is specified, update cluster configuration in a file specified by <path>.
All options are documented in corosync.conf(5) man page. There are different transport options for
transport types. Compression and crypto options are only available for knet transport. Totem
options can be set regardless of the transport type.
Transport options for knet transport are: ip_version, knet_pmtud_interval, link_mode
Transport options for udp and updu transports are: ip_version, netmtu
Compression options are: level, model, threshold
Crypto options are: cipher, hash, model
Totem options are: block_unlisted_ips, consensus, downcheck, fail_recv_const,
heartbeat_failures_allowed, hold, join, max_messages, max_network_delay, merge, miss_count_const,
send_join, seqno_unchanged_const, token, token_coefficient, token_retransmit,
token_retransmits_before_loss_const, window_size
config uuid generate [--corosync_conf <path>] [--force]
Generate a new cluster UUID and distribute it to all cluster nodes. Cluster UUID is not used by
the cluster stack in any way, it is provided to easily distinguish between multiple clusters in a
multi-cluster environment since the cluster name does not have to be unique.
If --corosync_conf is specified, update cluster configuration in file specified by <path>.
If --force is specified, existing UUID will be overwritten.
authkey corosync [<path>]
Generate a new corosync authkey and distribute it to all cluster nodes. If <path> is specified, do
not generate a key and use key from the file.
start [--all | <node>... ] [--wait[=<n>]] [--request-timeout=<seconds>]
Start a cluster on specified node(s). If no nodes are specified then start a cluster on the local
node. If --all is specified then start a cluster on all nodes. If the cluster has many nodes then
the start request may time out. In that case you should consider setting --request-timeout to a
suitable value. If --wait is specified, pcs waits up to 'n' seconds for the cluster to get ready
to provide services after the cluster has successfully started.
stop [--all | <node>... ] [--request-timeout=<seconds>]
Stop a cluster on specified node(s). If no nodes are specified then stop a cluster on the local
node. If --all is specified then stop a cluster on all nodes. If the cluster is running resources
which take long time to stop then the stop request may time out before the cluster actually stops.
In that case you should consider setting --request-timeout to a suitable value.
kill Force corosync and pacemaker daemons to stop on the local node (performs kill -9). Note that init
system (e.g. systemd) can detect that cluster is not running and start it again. If you want to
stop cluster on a node, run pcs cluster stop on that node.
enable [--all | <node>... ]
Configure cluster to run on node boot on specified node(s). If node is not specified then cluster
is enabled on the local node. If --all is specified then cluster is enabled on all nodes.
disable [--all | <node>... ]
Configure cluster to not run on node boot on specified node(s). If node is not specified then
cluster is disabled on the local node. If --all is specified then cluster is disabled on all
nodes.
auth [-u <username>] [-p <password>]
Authenticate pcs/pcsd to pcsd on nodes configured in the local cluster.
status View current cluster status (an alias of 'pcs status cluster').
rename Rename configured cluster. The cluster has to be stopped to complete this operation.
Manual steps are needed in case the cluster uses GFS2 filesystem or DLM:
for GFS2:
The lock table name on each GFS2 filesystem must be updated to reflect the new name of the
cluster so that the filesystems can be mounted.
for DLM:
The DLM cluster name in the shared volume groups metadata must be updated so that the volume
groups can start.
sync Sync cluster configuration (files which are supported by all subcommands of this command) to all
cluster nodes.
sync corosync
Sync corosync configuration to all nodes found from current corosync.conf file.
cib [filename] [scope=<scope> | --config]
Get the raw xml from the CIB (Cluster Information Base). If a filename is provided, we save the
CIB to that file, otherwise the CIB is printed. Specify scope to get a specific section of the
CIB. Valid values of the scope are: acls, alerts, configuration, constraints, crm_config, fencing-
topology, nodes, op_defaults, resources, rsc_defaults, tags. --config is the same as
scope=configuration. Do not specify a scope if you want to edit the saved CIB using pcs (pcs -f
<command>).
cib-push <filename> [--wait[=<n>]] [diff-against=<filename_original> | scope=<scope> | --config]
Push the raw xml from <filename> to the CIB (Cluster Information Base). You can obtain the CIB by
running the 'pcs cluster cib' command, which is recommended first step when you want to perform
desired modifications (pcs -f <command>) for the one-off push.
If diff-against is specified, pcs diffs contents of filename against contents of filename_original
and pushes the result to the CIB.
Specify scope to push a specific section of the CIB. Valid values of the scope are: acls, alerts,
configuration, constraints, crm_config, fencing-topology, nodes, op_defaults, resources,
rsc_defaults, tags. --config is the same as scope=configuration. Use of --config is recommended.
Do not specify a scope if you need to push the whole CIB or be warned in the case of outdated CIB.
If --wait is specified wait up to 'n' seconds for changes to be applied.
WARNING: the selected scope of the CIB will be overwritten by the current content of the specified
file.
Example:
pcs cluster cib > original.xml
cp original.xml new.xml
pcs -f new.xml constraint location apache prefers node2
pcs cluster cib-push new.xml diff-against=original.xml
cib-upgrade
Upgrade the CIB to conform to the latest version of the document schema.
edit [scope=<scope> | --config]
Edit the cib in the editor specified by the $EDITOR environment variable and push out any changes
upon saving. Specify scope to edit a specific section of the CIB. Valid values of the scope are:
acls, alerts, configuration, constraints, crm_config, fencing-topology, nodes, op_defaults,
resources, rsc_defaults, tags. --config is the same as scope=configuration. Use of --config is
recommended. Do not specify a scope if you need to edit the whole CIB or be warned in the case of
outdated CIB.
node add <node name> [addr=<node address>]... [watchdog=<watchdog path>] [device=<SBD device path>]...
[--start [--wait[=<n>]]] [--enable] [--no-watchdog-validation]
Add the node to the cluster and synchronize all relevant configuration files to the new node. This
command can only be run on an existing cluster node.
The new node is specified by its name and optionally its addresses. If no addresses are specified
for the node, pcs will configure corosync to communicate with the node using an address provided
in 'pcs host auth' command. Otherwise, pcs will configure corosync to communicate with the node
using the specified addresses.
Use 'watchdog' to specify a path to a watchdog on the new node, when SBD is enabled in the
cluster. If SBD is configured with shared storage, use 'device' to specify path to shared
device(s) on the new node.
If --start is specified also start cluster on the new node, if --wait is specified wait up to 'n'
seconds for the new node to start. If --enable is specified configure cluster to start on the new
node on boot. If --no-watchdog-validation is specified, validation of watchdog will be skipped.
WARNING: By default, it is tested whether the specified watchdog is supported. This may cause a
restart of the system when a watchdog with no-way-out-feature enabled is present. Use
--no-watchdog-validation to skip watchdog validation.
node delete <node name> [<node name>]...
Shutdown specified nodes and remove them from the cluster.
node remove <node name> [<node name>]...
Shutdown specified nodes and remove them from the cluster.
node add-remote <node name> [<node address>] [options] [op <operation action> <operation options>
[<operation action> <operation options>]...] [meta <meta options>] [--wait[=<n>]]
Add the node to the cluster as a remote node. Sync all relevant configuration files to the new
node. Start the node and configure it to start the cluster on boot. Options are port and
reconnect_interval. Operations and meta belong to an underlying connection resource
(ocf:pacemaker:remote). If node address is not specified for the node, pcs will configure
pacemaker to communicate with the node using an address provided in 'pcs host auth' command.
Otherwise, pcs will configure pacemaker to communicate with the node using the specified
addresses. If --wait is specified, wait up to 'n' seconds for the node to start.
node delete-remote <node identifier>
Shutdown specified remote node and remove it from the cluster. The node-identifier can be the name
of the node or the address of the node.
node remove-remote <node identifier>
Shutdown specified remote node and remove it from the cluster. The node-identifier can be the name
of the node or the address of the node.
node add-guest <node name> <resource id> [options] [--wait[=<n>]]
Make the specified resource a guest node resource. Sync all relevant configuration files to the
new node. Start the node and configure it to start the cluster on boot. Options are remote-addr,
remote-port and remote-connect-timeout. If remote-addr is not specified for the node, pcs will
configure pacemaker to communicate with the node using an address provided in 'pcs host auth'
command. Otherwise, pcs will configure pacemaker to communicate with the node using the specified
addresses. If --wait is specified, wait up to 'n' seconds for the node to start.
node delete-guest <node identifier>
Shutdown specified guest node and remove it from the cluster. The node-identifier can be the name
of the node or the address of the node or id of the resource that is used as the guest node.
node remove-guest <node identifier>
Shutdown specified guest node and remove it from the cluster. The node-identifier can be the name
of the node or the address of the node or id of the resource that is used as the guest node.
node clear <node name>
Remove specified node from various cluster caches. Use this if a removed node is still considered
by the cluster to be a member of the cluster.
link add <node_name>=<node_address>... [options <link options>]
Add a corosync link. One address must be specified for each cluster node. If no linknumber is
specified, pcs will use the lowest available linknumber.
Link options (documented in corosync.conf(5) man page) are: link_priority, linknumber, mcastport,
ping_interval, ping_precision, ping_timeout, pong_count, transport (udp or sctp)
link delete <linknumber> [<linknumber>]...
Remove specified corosync links.
link remove <linknumber> [<linknumber>]...
Remove specified corosync links.
link update <linknumber> [<node_name>=<node_address>...] [options <link options>]
Add, remove or change node addresses / link options of an existing corosync link. Use this if you
cannot add / remove links which is the preferred way. Unspecified options will be kept unchanged.
If you wish to remove an option, set it to empty value, i.e. 'option_name='.
Link options (documented in corosync.conf(5) man page) are:
for knet transport: link_priority, mcastport, ping_interval, ping_precision, ping_timeout,
pong_count, transport (udp or sctp)
for udp and udpu transports: bindnetaddr, broadcast, mcastaddr, mcastport, ttl
uidgid List the current configured uids and gids of users allowed to connect to corosync.
uidgid add [uid=<uid>] [gid=<gid>]
Add the specified uid and/or gid to the list of users/groups allowed to connect to corosync.
uidgid delete [uid=<uid>] [gid=<gid>]
Remove the specified uid and/or gid from the list of users/groups allowed to connect to corosync.
uidgid remove [uid=<uid>] [gid=<gid>]
Remove the specified uid and/or gid from the list of users/groups allowed to connect to corosync.
corosync [node]
Get the corosync.conf from the specified node or from the current node if node not specified.
reload corosync
Reload the corosync configuration on the current node.
destroy [--all] [--yes]
Permanently destroy the cluster on the current node, killing all cluster processes and removing
all cluster configuration files. Using --all will attempt to destroy the cluster on all nodes in
the local cluster.
WARNING: This command permanently removes any cluster configuration that has been created. It is
recommended to run 'pcs cluster stop' before destroying the cluster. To prevent accidental running
of this command, --yes or interactive user response is required in order to proceed.
verify [--full] [-f <filename>]
Checks the pacemaker configuration (CIB) for syntax and common conceptual errors. If no filename
is specified the check is performed on the currently running cluster. If --full is used more
verbose output will be printed.
report [--from "YYYY-M-D H:M:S" [--to "YYYY-M-D H:M:S"]] <dest> [--overwrite]
Create a tarball containing everything needed when reporting cluster problems. If --from and --to
are not used, the report will include the past 24 hours. No existing files will be overwritten,
unless --overwrite is specified.
stonith
[status [<resource id | tag id>] [node=<node>] [--hide-inactive]]
Show status of all currently configured stonith devices. If --hide-inactive is specified, only
show active stonith devices. If a resource or tag id is specified, only show status of the
specified resource or resources in the specified tag. If node is specified, only show status of
resources configured for the specified node.
config [--output-format text|cmd|json] [<stonith id>]...
Show options of all currently configured stonith devices or if stonith device ids are specified
show the options for the specified stonith device ids. There are 3 formats of output available:
'cmd', 'json' and 'text', default is 'text'. Format 'text' is a human friendly output. Format
'cmd' prints pcs commands which can be used to recreate the same configuration. Format 'json' is a
machine oriented output of the configuration.
Note: The 'json' output format does not include fencing levels. Use 'pcs stonith level config
--output-format=json' to get fencing levels.
list [filter] [--nodesc]
Show list of all available stonith agents (if filter is provided then only stonith agents matching
the filter will be shown). If --nodesc is used then descriptions of stonith agents are not
printed.
describe <stonith agent> [--full]
Show options for specified stonith agent. If --full is specified, all options including advanced
and deprecated ones are shown.
create <stonith id> <stonith device type> [stonith device options] [op <operation action> <operation
options> [<operation action> <operation options>]...] [meta <meta options>] [--disabled]
[--agent-validation] [--wait[=n]]
Create stonith device with specified type and options.
If--disabled is specified the stonith device is not used.
If --agent-validation is specified, stonith agent validate-all action will be used to validate
stonith device options and will prevent creating a misconfigured stonith device. If
--agent-validation is not specified, the validation will be done anyway, but it will only produce
warnings not preventing the stonith device from being created.
If --wait is specified, pcs will wait up to 'n' seconds for the stonith device to start and then
return 0 if the stonith device is started, or 1 if the stonith device has not yet started. If 'n'
is not specified it defaults to 60 minutes.
Example: Create a device for nodes node1 and node2
pcs stonith create MyFence fence_virt pcmk_host_list=node1,node2
Example: Use port p1 for node n1 and ports p2 and p3 for node n2
pcs stonith create MyFence fence_virt 'pcmk_host_map=n1:p1;n2:p2,p3'
update <stonith id> [stonith options] [op [<operation action> <operation options>]...] [meta <meta
options>] [--agent-validation] [--wait[=n]]
Add, remove or change options of specified stonith device. Unspecified options will be kept
unchanged. If you wish to remove an option, set it to empty value, i.e. 'option_name='.
If an operation (op) is specified it will update the first found operation with the same action on
the specified stonith device. If no operation with that action exists then a new operation will be
created. (WARNING: all existing options on the updated operation will be reset if not specified.)
If you want to create multiple monitor operations you should use the 'op add' & 'op remove'
commands.
If --agent-validation is specified, stonith agent validate-all action will be used to validate
stonith device options and will prevent creating a misconfigured stonith device. If
--agent-validation is not specified, the validation will be done anyway, but it will only produce
warnings not preventing the stonith device from being updated.
If --wait is specified, pcs will wait up to 'n' seconds for the changes to take effect and then
return 0 if the changes have been processed or 1 otherwise. If 'n' is not specified it defaults to
60 minutes.
update-scsi-devices <stonith id> (set <device-path> [<device-path>...]) | (add <device-path>
[<device-path>...] delete|remove <device-path> [<device-path>...] )
Update scsi fencing devices without affecting other resources. You must specify either list of set
devices or at least one device for add or delete/remove devices. Stonith resource must be running
on one cluster node. Each device will be unfenced on each cluster node running cluster. Supported
fence agents: fence_scsi, fence_mpath.
delete <stonith id>...
Remove stonith resources from configuration.
remove <stonith id>...
Remove stonith resources from configuration.
op add <stonith id> <operation action> [operation properties]
Add operation for specified stonith device.
op delete <stonith id> <operation action> [<operation properties>...]
Remove specified operation (note: you must specify the exact operation properties to properly
remove an existing operation).
op delete <operation id>
Remove the specified operation id.
op remove <stonith id> <operation action> [<operation properties>...]
Remove specified operation (note: you must specify the exact operation properties to properly
remove an existing operation).
op remove <operation id>
Remove the specified operation id.
op defaults [config] [--all | --no-check-expired] [--full] [--output-format text|cmd|json]
This command is an alias of 'resource op defaults [config]' command.
List currently configured default values for operations. If --all is specified, also list expired
sets of values. If --full is specified, also list ids. If --no-expire-check is specified, do not
evaluate whether sets of values are expired. There are 3 formats of output available: 'cmd',
'json' and 'text', default is 'text'. Format 'text' is a human friendly output. Format 'cmd'
prints pcs commands which can be used to recreate the same configuration. Format 'json' is a
machine oriented output of the configuration.
op defaults <name>=<value>...
This command is an alias of 'resource op defaults' command.
Set default values for operations.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
op defaults set create [<set options>] [meta [<name>=<value>]...] [rule [<expression>]]
This command is an alias of 'resource op defaults set create' command.
Create a new set of default values for resource / stonith device operations. You may specify a
rule describing resources / stonith devices and / or operations to which the set applies.
Set options are: id, score
Expression looks like one of the following:
op <operation name> [interval=<interval>]
resource [<standard>]:[<provider>]:[<type>]
defined|not_defined <node attribute>
<node attribute> lt|gt|lte|gte|eq|ne [string|integer|number|version] <value>
date gt|lt <date>
date in_range [<date>] to <date>
date in_range <date> to duration <duration options>
date-spec <date-spec options>
<expression> and|or <expression>
(<expression>)
You may specify all or any of 'standard', 'provider' and 'type' in a resource expression. For
example: 'resource ocf::' matches all resources of 'ocf' standard, while 'resource ::Dummy'
matches all resources of 'Dummy' type regardless of their standard and provider.
Dates are expected to conform to ISO 8601 format.
Duration options are: years, months, weeks, days, hours, minutes, seconds. Value for these options
is an integer.
Date-spec options are: years, weekyears, months, weeks, yeardays, monthdays, weekdays, hours,
minutes, seconds. Value for these options is an integer or a range written as integer-integer.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
op defaults set delete [<set id>]...
This command is an alias of 'resource op defaults set delete' command.
Delete specified options sets.
op defaults set remove [<set id>]...
This command is an alias of 'resource op defaults set delete' command.
Delete specified options sets.
op defaults set update <set id> [meta [<name>=<value>]...]
This command is an alias of 'resource op defaults set update' command.
Add, remove or change values in specified set of default values for resource / stonith device
operations. Unspecified options will be kept unchanged. If you wish to remove an option, set it to
empty value, i.e. 'option_name='.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
op defaults update <name>=<value>...
This command is an alias of 'resource op defaults update' command.
Add, remove or change default values for operations. This is a simplified command useful for cases
when you only manage one set of default values. Unspecified options will be kept unchanged. If you
wish to remove an option, set it to empty value, i.e. 'option_name='.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
meta <stonith id> <meta options> [--wait[=n]]
Add specified options to the specified stonith device. Meta options should be in the format of
name=value, options may be removed by setting an option without a value. If --wait is specified,
pcs will wait up to 'n' seconds for the changes to take effect and then return 0 if the changes
have been processed or 1 otherwise. If 'n' is not specified it defaults to 60 minutes.
Example: pcs stonith meta test_stonith failure-timeout=50 resource-stickiness=
defaults [config] [--all | --no-check-expired] [--full] [--output-format text|cmd|json]
This command is an alias of 'resource defaults [config]' command.
List currently configured default values for resources / stonith devices. If --all is specified,
also list expired sets of values. If --full is specified, also list ids. If --no-expire-check is
specified, do not evaluate whether sets of values are expired. There are 3 formats of output
available: 'cmd', 'json' and 'text', default is 'text'. Format 'text' is a human friendly output.
Format 'cmd' prints pcs commands which can be used to recreate the same configuration. Format
'json' is a machine oriented output of the configuration.
defaults <name>=<value>...
This command is an alias of 'resource defaults' command.
Set default values for resources / stonith devices.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
defaults set create [<set options>] [meta [<name>=<value>]...] [rule [<expression>]]
This command is an alias of 'resource defaults set create' command.
Create a new set of default values for resources / stonith devices. You may specify a rule
describing resources / stonith devices to which the set applies.
Set options are: id, score
Expression looks like one of the following:
resource [<standard>]:[<provider>]:[<type>]
date gt|lt <date>
date in_range [<date>] to <date>
date in_range <date> to duration <duration options>
date-spec <date-spec options>
<expression> and|or <expression>
(<expression>)
You may specify all or any of 'standard', 'provider' and 'type' in a resource expression. For
example: 'resource ocf::' matches all resources of 'ocf' standard, while 'resource ::Dummy'
matches all resources of 'Dummy' type regardless of their standard and provider.
Dates are expected to conform to ISO 8601 format.
Duration options are: years, months, weeks, days, hours, minutes, seconds. Value for these options
is an integer.
Date-spec options are: years, weekyears, months, weeks, yeardays, monthdays, weekdays, hours,
minutes, seconds. Value for these options is an integer or a range written as integer-integer.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
defaults set delete [<set id>]...
This command is an alias of 'resource defaults set delete' command.
Delete specified options sets.
defaults set remove [<set id>]...
This command is an alias of 'resource defaults set delete' command.
Delete specified options sets.
defaults set update <set id> [meta [<name>=<value>]...]
This command is an alias of 'resource defaults set update' command.
Add, remove or change values in specified set of default values for resources / stonith devices.
Unspecified options will be kept unchanged. If you wish to remove an option, set it to empty
value, i.e. 'option_name='.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
defaults update <name>=<value>...
This command is an alias of 'resource defaults update' command.
Add, remove or change default values for resources / stonith devices. This is a simplified command
useful for cases when you only manage one set of default values. Unspecified options will be kept
unchanged. If you wish to remove an option, set it to empty value, i.e. 'option_name='.
NOTE: Defaults do not apply to resources / stonith devices which override them with their own
defined values.
cleanup [<resource id | stonith id>] [node=<node>] [operation=<operation> [interval=<interval>]]
[--strict]
This command is an alias of 'resource cleanup' command.
Make the cluster forget failed operations from history of the resource / stonith device and
re-detect its current state. This can be useful to purge knowledge of past failures that have
since been resolved.
If the named resource is part of a group, or one numbered instance of a clone or bundled resource,
the clean-up applies to the whole collective resource unless --strict is given.
If a resource id / stonith id is not specified then all resources / stonith devices will be
cleaned up.
If a node is not specified then resources / stonith devices on all nodes will be cleaned up.
refresh [<resource id | stonith id>] [node=<node>] [--strict]
This command is an alias of 'resource refresh' command.
Make the cluster forget the complete operation history (including failures) of the resource /
stonith device and re-detect its current state. If you are interested in forgetting failed
operations only, use the 'pcs resource cleanup' command.
If the named resource is part of a group, or one numbered instance of a clone or bundled resource,
the refresh applies to the whole collective resource unless --strict is given.
If a resource id / stonith id is not specified then all resources / stonith devices will be
refreshed.
If a node is not specified then resources / stonith devices on all nodes will be refreshed.
failcount [show [<resource id | stonith id>] [node=<node>] [operation=<operation> [interval=<interval>]]]
[--full]
This command is an alias of 'resource failcount show' command.
Show current failcount for resources and stonith devices, optionally filtered by a resource /
stonith device, node, operation and its interval. If --full is specified do not sum failcounts per
resource / stonith device and node. Use 'pcs resource cleanup' or 'pcs resource refresh' to reset
failcounts.
enable <stonith id>... [--wait[=n]]
Allow the cluster to use the stonith devices. If --wait is specified, pcs will wait up to 'n'
seconds for the stonith devices to start and then return 0 if the stonith devices are started, or
1 if the stonith devices have not yet started. If 'n' is not specified it defaults to 60 minutes.
disable <stonith id>... [--wait[=n]]
Attempt to stop the stonith devices if they are running and disallow the cluster to use them. If
--wait is specified, pcs will wait up to 'n' seconds for the stonith devices to stop and then
return 0 if the stonith devices are stopped or 1 if the stonith devices have not stopped. If 'n'
is not specified it defaults to 60 minutes.
level [config] [--output-format text|cmd|json]
Lists all of the fencing levels currently configured. There are 3 formats of output available:
'cmd', 'json' and 'text', default is 'text'. Format 'text' is a human friendly output. Format
'cmd' prints pcs commands which can be used to recreate the same configuration. Format 'json' is a
machine oriented output of the configuration.
level add <level> <target> <stonith id> [<stonith id>...] [id=<level id>]
Add the fencing level for the specified target with the list of stonith devices to attempt for
that target at that level. Fence levels are attempted in numerical order (starting with 1). If a
level succeeds (meaning all devices are successfully fenced in that level) then no other levels
are tried, and the target is considered fenced. Target may be a node name <node_name> or
%<node_name> or node%<node_name>, a node name regular expression regexp%<node_pattern> or a node
attribute value attrib%<name>=<value>. Id for the fencing level will be generated if not specified
by the id option.
level delete <level> [target <target>] [stonith <stonith id>...]
Removes the fence level for the level, target and/or devices specified. If no target or devices
are specified then the fence level is removed. Target may be a node name <node_name> or
%<node_name> or node%<node_name>, a node name regular expression regexp%<node_pattern> or a node
attribute value attrib%<name>=<value>.
level remove <level> [target <target>] [stonith <stonith id>...]
Removes the fence level for the level, target and/or devices specified. If no target or devices
are specified then the fence level is removed. Target may be a node name <node_name> or
%<node_name> or node%<node_name>, a node name regular expression regexp%<node_pattern> or a node
attribute value attrib%<name>=<value>.
level clear [target <target> | stonith <stonith id>...]
Clears the fence levels on the target (or stonith id) specified or clears all fence levels if a
target/stonith id is not specified. Target may be a node name <node_name> or %<node_name> or
node%<node_name>, a node name regular expression regexp%<node_pattern> or a node attribute value
attrib%<name>=<value>. Example: pcs stonith level clear stonith dev_a dev_b
level verify
Verifies all fence devices and nodes specified in fence levels exist.
fence <node> [--off]
Fence the node specified (if --off is specified, use the 'off' API call to stonith which will turn
the node off instead of rebooting it).
confirm <node> [--yes]
Confirm to the cluster that the specified node is powered off. This allows the cluster to recover
from a situation where no stonith device is able to fence the node. This command should ONLY be
used after manually ensuring that the node is powered off and has no access to shared resources.
WARNING: If this node is not actually powered off or it does have access to shared resources, data
corruption/cluster failure can occur. To prevent accidental running of this command, --yes or
interactive user response is required in order to proceed.
NOTE: It is not checked if the specified node exists in the cluster in order to be able to work
with nodes not visible from the local cluster partition.
history [show [<node>]]
Show fencing history for the specified node or all nodes if no node specified.
history cleanup [<node>]
Cleanup fence history of the specified node or all nodes if no node specified.
history update
Update fence history from all nodes.
sbd enable [watchdog=<path>[@<node>]]... [device=<path>[@<node>]]... [<SBD_OPTION>=<value>]...
[--no-watchdog-validation]
Enable SBD in cluster. Default path for watchdog device is /dev/watchdog. Allowed SBD options:
SBD_WATCHDOG_TIMEOUT (default: 5), SBD_DELAY_START (default: no), SBD_STARTMODE (default: always)
and SBD_TIMEOUT_ACTION. SBD options are documented in sbd(8) man page. It is possible to specify
up to 3 devices per node. If --no-watchdog-validation is specified, validation of watchdogs will
be skipped.
WARNING: Cluster has to be restarted in order to apply these changes.
WARNING: By default, it is tested whether the specified watchdog is supported. This may cause a
restart of the system when a watchdog with no-way-out-feature enabled is present. Use
--no-watchdog-validation to skip watchdog validation.
Example of enabling SBD in cluster with watchdogs on node1 will be /dev/watchdog2, on node2
/dev/watchdog1, /dev/watchdog0 on all other nodes, device /dev/sdb on node1, device /dev/sda on
all other nodes and watchdog timeout will bet set to 10 seconds:
pcs stonith sbd enable watchdog=/dev/watchdog2@node1 watchdog=/dev/watchdog1@node2
watchdog=/dev/watchdog0 device=/dev/sdb@node1 device=/dev/sda SBD_WATCHDOG_TIMEOUT=10
sbd disable
Disable SBD in cluster.
WARNING: Cluster has to be restarted in order to apply these changes.
sbd device setup device=<path> [device=<path>]... [watchdog-timeout=<integer>]
[allocate-timeout=<integer>] [loop-timeout=<integer>] [msgwait-timeout=<integer>] [--yes]
Initialize SBD structures on device(s) with specified timeouts.
WARNING: All content on the specified device(s) will be overwritten. To prevent accidental
running of this command, --yes or interactive user response is required in order to proceed.
sbd device message <device-path> <node> <message-type>
Manually set a message of the specified type on the device for the node. Possible message types
(they are documented in sbd(8) man page): test, reset, off, crashdump, exit, clear
sbd status [--full]
Show status of SBD services in cluster and local device(s) configured. If --full is specified,
also dump of SBD headers on device(s) will be shown.
sbd config
Show SBD configuration in cluster.
sbd watchdog list
Show all available watchdog devices on the local node.
WARNING: Listing available watchdogs may cause a restart of the system when a watchdog with
no-way-out-feature enabled is present.
sbd watchdog test [<watchdog-path>] [--yes]
This operation is expected to force-reboot the local system without following any shutdown
procedures using a watchdog. If no watchdog is specified, available watchdog will be used if only
one watchdog device is available on the local system. To prevent accidental running of this
command, --yes or interactive user response is required in order to proceed.
acl
[config]
List all current access control lists.
enable Enable access control lists.
disable
Disable access control lists.
role create <role id> [description=<description>] [((read | write | deny) (xpath <query> | id <id>))...]
Create a role with the id and (optional) description specified. Each role can also have an
unlimited number of permissions (read/write/deny) applied to either an xpath query or the id of a
specific element in the cib.
Permissions are applied to the selected XML element's entire XML subtree (all elements enclosed
within it). Write permission grants the ability to create, modify, or remove the element and its
subtree, and also the ability to create any "scaffolding" elements (enclosing elements that do not
have attributes other than an ID). Permissions for more specific matches (more deeply nested
elements) take precedence over more general ones. If multiple permissions are configured for the
same match (for example, in different roles applied to the same user), any deny permission takes
precedence, then write, then lastly read.
An xpath may include an attribute expression to select only elements that match the expression,
but the permission still applies to the entire element (and its subtree), not to the attribute
alone. For example, using the xpath "//*[@name]" to give write permission would allow changes to
the entirety of all elements that have a "name" attribute and everything enclosed by those
elements. There is no way currently to give permissions for just one attribute of an element. That
is to say, you can not define an ACL that allows someone to read just the dc-uuid attribute of the
cib tag - that would select the cib element and give read access to the entire CIB.
role delete <role id>
Delete the role specified and remove it from any users/groups it was assigned to.
role remove <role id>
Delete the role specified and remove it from any users/groups it was assigned to.
role assign <role id> [to] user|group <username/group>
Assign a role to a user or group already created with 'pcs acl user|group create'.
role unassign <role id> [from] user|group <username/group>
Remove a role from the specified user or group.
user create <username> [<role id>]...
Create an ACL for the user specified and assign roles to the user.
user delete <username>
Remove the user specified (and roles assigned will be unassigned for the specified user).
user remove <username>
Remove the user specified (and roles assigned will be unassigned for the specified user).
group create <group> [<role id>]...
Create an ACL for the group specified and assign roles to the group.
group delete <group>
Remove the group specified (and roles assigned will be unassigned for the specified group).
group remove <group>
Remove the group specified (and roles assigned will be unassigned for the specified group).
permission add <role id> ((read | write | deny) (xpath <query> | id <id>))...
Add the listed permissions to the role specified. Permissions are applied to either an xpath query
or the id of a specific element in the CIB.
Permissions are applied to the selected XML element's entire XML subtree (all elements enclosed
within it). Write permission grants the ability to create, modify, or remove the element and its
subtree, and also the ability to create any "scaffolding" elements (enclosing elements that do not
have attributes other than an ID). Permissions for more specific matches (more deeply nested
elements) take precedence over more general ones. If multiple permissions are configured for the
same match (for example, in different roles applied to the same user), any deny permission takes
precedence, then write, then lastly read.
An xpath may include an attribute expression to select only elements that match the expression,
but the permission still applies to the entire element (and its subtree), not to the attribute
alone. For example, using the xpath "//*[@name]" to give write permission would allow changes to
the entirety of all elements that have a "name" attribute and everything enclosed by those
elements. There is no way currently to give permissions for just one attribute of an element. That
is to say, you can not define an ACL that allows someone to read just the dc-uuid attribute of the
cib tag - that would select the cib element and give read access to the entire CIB.
permission delete <permission id>
Remove the permission id specified (permission id's are listed in parenthesis after permissions in
'pcs acl' output).
permission remove <permission id>
Remove the permission id specified (permission id's are listed in parenthesis after permissions in
'pcs acl' output).
property
[config [<property>... | --all | --defaults | (--output-format text|cmd|json)]] | [--all | --defaults |
(--output-format text|cmd|json)]
List property settings (default: lists configured properties). If --defaults is specified will
show all property defaults, if --all is specified, current configured properties will be shown
with unset properties and their defaults. See 'pcs property describe' for a description of the
properties. There are 3 formats of output available: 'cmd', 'json' and 'text', default is 'text'.
Format 'text' is a human friendly output. Format 'cmd' prints pcs commands which can be used to
recreate the same configuration. Format 'json' is a machine oriented output of the configuration.
defaults [<property>...] | [--full]
List all property defaults or only defaults for specified properties. If --full is specified, all
properties defaults including advanced are shown.
describe [<property>...] [--output-format text|json] [--full]
Show cluster properties. There are 2 formats of output available: 'json' and 'text', default is
'text'. Format 'text' is a human friendly output. Format 'json' is a machine oriented output of
the configuration. If --full is specified, all properties descriptions including advanced are
shown.
set <property>=[<value>] ... [--force]
Set specific pacemaker properties (if the value is blank then the property is removed from the
configuration). If a property is not recognized by pcs the property will not be created unless
the --force is used. See 'pcs property describe' for a description of the properties.
unset <property> ...
Remove property from configuration. See 'pcs property describe' for a description of the
properties.
constraint
[config] [--full] [--all] [--output-format text|cmd|json]
List all current constraints that are not expired. If --all is specified also show expired
constraints. If --full is specified also list the constraint ids. There are 3 formats of output
available: 'cmd', 'json' and 'text', default is 'text'. Format 'text' is a human friendly output.
Format 'cmd' prints pcs commands which can be used to recreate the same configuration. Format
'json' is a machine oriented output of the configuration.
location <resource> prefers <node>[=<score>] [<node>[=<score>]]...
Create a location constraint on a resource to prefer the specified node with score (default score:
INFINITY). Resource may be either a resource id <resource_id> or %<resource_id> or
resource%<resource_id>, or a resource name regular expression regexp%<resource_pattern>.
location <resource> avoids <node>[=<score>] [<node>[=<score>]]...
Create a location constraint on a resource to avoid the specified node with score (default score:
INFINITY). Resource may be either a resource id <resource_id> or %<resource_id> or
resource%<resource_id>, or a resource name regular expression regexp%<resource_pattern>.
location <resource> rule [id=<rule id>] [resource-discovery=<option>] [role=Promoted|Unpromoted]
[constraint-id=<id>] [score=<score> | score-attribute=<attribute>] <expression>
Creates a location constraint with a rule on the specified resource where expression looks like
one of the following:
defined|not_defined <node attribute>
<node attribute> lt|gt|lte|gte|eq|ne [string|integer|number|version] <value>
date gt|lt <date>
date in_range <date> to <date>
date in_range <date> to duration <duration options>...
date-spec <date-spec options>...
<expression> and|or <expression>
( <expression> )
Dates are expected to conform to ISO 8601 format.
Duration options are: years, months, weeks, days, hours, minutes, seconds. Value for these options
is an integer.
Date-spec options are: years, weekyears, months, weeks, yeardays, monthdays, weekdays, hours,
minutes, seconds. Value for these options is an integer or a range written as integer-integer.
Resource may be either a resource id <resource_id> or %<resource_id> or resource%<resource_id>, or
a resource name regular expression regexp%<resource_pattern>.
If score is omitted it defaults to INFINITY. If id is omitted one is generated from the resource
id. If resource-discovery is omitted it defaults to 'always'.
location [config [resources [<resource reference>...]] | [nodes [<node>...]]] [--full] [--all]
[--output-format text|cmd|json]
List all the current location constraints that are not expired. If 'resources' is specified,
location constraints are displayed per resource. If 'nodes' is specified, location constraints are
displayed per node. If specific nodes, resources or resource name regular expressions are
specified, only constraints containing those will be shown. Resource reference may be either a
resource id <resource_id> or %<resource_id> or resource%<resource_id>, or a resource name regular
expression regexp%<resource_pattern>. If --full is specified show the internal constraint id's as
well. If --all is specified show the expired constraints. There are 3 formats of output available:
'cmd', 'json' and 'text', default is 'text'. Format 'text' is a human friendly output. Format
'cmd' prints pcs commands which can be used to recreate the same configuration. Format 'json' is a
machine oriented output of the configuration.
location add <id> <resource> <node> [score=<score>] [resource-discovery=<option>]
Add a location constraint with the appropriate id for the specified resource, node name and score
(default score: INFINITY). Resource may be either a resource id <resource_id> or %<resource_id> or
resource%<resource_id>, or a resource name regular expression regexp%<resource_pattern>.
location delete <id>...
Remove location constraints with the specified ids.
location remove <id>...
Remove location constraints with the specified ids.
order [config] [--full] [--output-format text|cmd|json]
List all current ordering constraints (if --full is specified show the internal constraint id's as
well). There are 3 formats of output available: 'cmd', 'json' and 'text', default is 'text'.
Format 'text' is a human friendly output. Format 'cmd' prints pcs commands which can be used to
recreate the same configuration. Format 'json' is a machine oriented output of the configuration.
order [action] <resource id> then [action] <resource id> [options]
Add an ordering constraint specifying actions (start, stop, promote, demote) and if no action is
specified the default action will be start. Available options are
kind=Optional/Mandatory/Serialize, symmetrical=true/false, require-all=true/false and
id=<constraint-id>.
order set <resource1> [resourceN]... [options] [set <resourceX> ... [options]] [setoptions
[constraint_options]]
Create an ordered set of resources. Available options are sequential=true/false,
require-all=true/false and action=start/promote/demote/stop. Available constraint_options are
id=<constraint-id>, kind=Optional/Mandatory/Serialize and symmetrical=true/false.
order delete <resource1> [resourceN]...
Remove resource from any ordering constraint
order remove <resource1> [resourceN]...
Remove resource from any ordering constraint
colocation [config] [--full] [--output-format text|cmd|json]
List all current colocation constraints (if --full is specified show the internal constraint id's
as well). There are 3 formats of output available: 'cmd', 'json' and 'text', default is 'text'.
Format 'text' is a human friendly output. Format 'cmd' prints pcs commands which can be used to
recreate the same configuration. Format 'json' is a machine oriented output of the configuration.
colocation add [<role>] <source resource id> with [<role>] <target resource id> [score=<score>]
[<options>] [id=<constraint-id>]
Request <source resource> to run on the same node where pacemaker has determined <target resource>
should run. Positive values of score mean the resources should be run on the same node, negative
values mean the resources should not be run on the same node. Specifying 'INFINITY' (or
'-INFINITY') for the score forces <source resource> to run (or not run) with <target resource>
(score defaults to "INFINITY"). A role can be: 'Promoted', 'Unpromoted', 'Started', 'Stopped' (if
no role is specified, it defaults to 'Started').
colocation set <resource1> [resourceN]... [options] [set <resourceX> ... [options]] [setoptions
[constraint_options]]
Create a colocation constraint with a resource set. Available options are sequential=true/false
and role=Stopped/Started/Promoted/Unpromoted. Available constraint_options are id and score.
colocation delete <source resource id> <target resource id>
Remove colocation constraints with specified resources.
colocation remove <source resource id> <target resource id>
Remove colocation constraints with specified resources.
ticket [config] [--full] [--output-format text|cmd|json]
List all current ticket constraints (if --full is specified show the internal constraint id's as
well). There are 3 formats of output available: 'cmd', 'json' and 'text', default is 'text'.
Format 'text' is a human friendly output. Format 'cmd' prints pcs commands which can be used to
recreate the same configuration. Format 'json' is a machine oriented output of the configuration.
ticket add <ticket> [<role>] <resource id> [<options>] [id=<constraint-id>]
Create a ticket constraint for <resource id>. Available option is
loss-policy=fence/stop/freeze/demote. A role can be Promoted, Unpromoted, Started or Stopped.
ticket set <resource1> [<resourceN>]... [<options>] [set <resourceX> ... [<options>]] setoptions
<constraint_options>
Create a ticket constraint with a resource set. Available options are
role=Stopped/Started/Promoted/Unpromoted. Required constraint option is ticket=<ticket>. Optional
constraint options are id=<constraint-id> and loss-policy=fence/stop/freeze/demote.
ticket delete <ticket> <resource id>
Remove all ticket constraints with <ticket> from <resource id>.
ticket remove <ticket> <resource id>
Remove all ticket constraints with <ticket> from <resource id>.
delete <constraint id>...
Remove constraint(s) or constraint rules with the specified id(s).
remove <constraint id>...
Remove constraint(s) or constraint rules with the specified id(s).
ref <resource>...
List constraints referencing specified resource.
qdevice
status <device model> [--full] [<cluster name>]
Show runtime status of specified model of quorum device provider. Using --full will give more
detailed output. If <cluster name> is specified, only information about the specified cluster
will be displayed.
setup model <device model> [--enable] [--start]
Configure specified model of quorum device provider. Quorum device then can be added to clusters
by running "pcs quorum device add" command in a cluster. --start will also start the provider.
--enable will configure the provider to start on boot.
destroy <device model>
Disable and stop specified model of quorum device provider and delete its configuration files.
start <device model>
Start specified model of quorum device provider.
stop <device model>
Stop specified model of quorum device provider.
kill <device model>
Force specified model of quorum device provider to stop (performs kill -9). Note that init system
(e.g. systemd) can detect that the qdevice is not running and start it again. If you want to stop
the qdevice, run "pcs qdevice stop" command.
enable <device model>
Configure specified model of quorum device provider to start on boot.
disable <device model>
Configure specified model of quorum device provider to not start on boot.
quorum
[config]
Show quorum configuration.
status Show quorum runtime status.
device add [<generic options>] model <device model> [<model options>] [heuristics <heuristics options>]
Add a quorum device to the cluster. Quorum device should be configured first with "pcs qdevice
setup". It is not possible to use more than one quorum device in a cluster simultaneously.
Currently the only supported model is 'net'. It requires model options 'algorithm' and 'host' to
be specified. Options are documented in corosync-qdevice(8) man page; generic options are
'sync_timeout' and 'timeout', for model net options check the quorum.device.net section, for
heuristics options see the quorum.device.heuristics section. Pcs automatically creates and
distributes TLS certificates and sets the 'tls' model option to the default value 'on'.
Example: pcs quorum device add model net algorithm=lms host=qnetd.internal.example.com
device heuristics delete
Remove all heuristics settings of the configured quorum device.
device heuristics remove
Remove all heuristics settings of the configured quorum device.
device delete
Remove a quorum device from the cluster.
device remove
Remove a quorum device from the cluster.
device status [--full]
Show quorum device runtime status. Using --full will give more detailed output.
device update [<generic options>] [model <model options>] [heuristics <heuristics options>]
Add, remove or change quorum device options. Unspecified options will be kept unchanged. If you
wish to remove an option, set it to empty value, i.e. 'option_name='. Requires the cluster to be
stopped. Model and options are all documented in corosync-qdevice(8) man page; for heuristics
options check the quorum.device.heuristics subkey section, for model options check the
quorum.device.<device model> subkey sections.
WARNING: If you want to change "host" option of qdevice model net, use "pcs quorum device remove"
and "pcs quorum device add" commands to set up configuration properly unless old and new host is
the same machine.
expected-votes <votes>
Set expected votes in the live cluster to specified value. This only affects the live cluster,
not changes any configuration files.
unblock [--yes]
Cancel waiting for all nodes when establishing quorum. Useful in situations where you know the
cluster is inquorate, but you are confident that the cluster should proceed with resource
management regardless. This command should ONLY be used when nodes which the cluster is waiting
for have been confirmed to be powered off and to have no access to shared resources.
WARNING: If the nodes are not actually powered off or they do have access to shared resources,
data corruption/cluster failure can occur. To prevent accidental running of this command, --yes or
interactive user response is required in order to proceed.
update [auto_tie_breaker=[0|1]] [last_man_standing=[0|1]] [last_man_standing_window=[<time in ms>]]
[wait_for_all=[0|1]]
Add, remove or change quorum options. At least one option must be specified. Unspecified options
will be kept unchanged. If you wish to remove an option, set it to empty value, i.e.
'option_name='. Options are documented in corosync's votequorum(5) man page. Requires the cluster
to be stopped.
booth
setup sites <address> <address> [<address>...] [arbitrators <address> ...] [--force]
Write new booth configuration with specified sites and arbitrators. Total number of peers (sites
and arbitrators) must be odd. When the configuration file already exists, command fails unless
--force is specified.
destroy
Remove booth configuration files.
ticket add <ticket> [<name>=<value> ...]
Add new ticket to the local site configuration. Ticket options are specified in booth manpage.
ticket delete <ticket>
Remove the specified ticket from the local site configuration. The ticket remains loaded in the
current CIB and should be cleaned up using the "pcs ticket cleanup" command.
ticket remove <ticket>
Remove the specified ticket from the local site configuration. The ticket remains loaded in the
current CIB and should be cleaned up using the "pcs ticket cleanup" command.
ticket cleanup [ticket]
Remove tickets from CIB at the local site. If no ticket name is provided, remove all the tickets
present in the CIB but not in the booth configuration. If the ticket name is specified, then
remove the specified ticket from CIB.
ticket standby <ticket>
Tell the cluster on the local site that this ticket is standby. The dependent resources will be
stopped or demoted gracefully without triggering loss-policies.
ticket unstandby <ticket>
Tell the cluster on the local site that this ticket is no longer standby.
config [<node>]
Show booth configuration from the specified node or from the current node if node not specified.
create ip <address>
Make the cluster run booth service on the specified ip address as a cluster resource. Typically
this is used to run booth site.
delete Remove booth resources created by the "pcs booth create" command.
remove Remove booth resources created by the "pcs booth create" command.
restart
Restart booth resources created by the "pcs booth create" command.
ticket grant <ticket> [<site address>]
Grant the ticket to the site specified by the address, hence to the booth formation this site is a
member of. When this specification is omitted, site address that has been specified with 'pcs
booth create' command is used. Specifying site address is therefore mandatory when running this
command at a host in an arbitrator role.
Note that the ticket must not be already granted in given booth formation; for an ad-hoc (and, in
the worst case, abrupt, for a lack of a direct atomicity) change of this preference baring direct
interventions at the sites, the ticket needs to be revoked first, only then it can be granted at
another site again.
ticket revoke <ticket> [<site address>]
Revoke the ticket in the booth formation as identified with one of its member sites specified by
the address. When this specification is omitted, site address that has been specified with a prior
'pcs booth create' command is used. Specifying site address is therefore mandatory when running
this command at a host in an arbitrator role.
status Print current status of booth on the local node.
pull <node>
Pull booth configuration from the specified node. Pull booth configuration from the specified
node. After pulling the configuration, the booth should be restarted. In case any tickets were
removed, the "pcs ticket cleanup" command should be used to remove any leftover tickets still
loaded in the CIB at the current site.
sync [--skip-offline]
Send booth configuration from the local node to all nodes in the cluster.
enable Enable booth arbitrator service.
disable
Disable booth arbitrator service.
start Start booth arbitrator service.
stop Stop booth arbitrator service.
status
[status] [--full] [--hide-inactive]
View all information about the cluster and resources (--full provides more details,
--hide-inactive hides inactive resources).
resources [<resource id | tag id>] [node=<node>] [--hide-inactive]
Show status of all currently configured resources. If --hide-inactive is specified, only show
active resources. If a resource or tag id is specified, only show status of the specified resource
or resources in the specified tag. If node is specified, only show status of resources configured
for the specified node.
cluster
View current cluster status.
corosync
View current membership information as seen by corosync.
quorum View current quorum status.
qdevice <device model> [--full] [<cluster name>]
Show runtime status of specified model of quorum device provider. Using --full will give more
detailed output. If <cluster name> is specified, only information about the specified cluster
will be displayed.
booth Print current status of booth on the local node.
nodes [corosync | both | config]
View current status of nodes from pacemaker. If 'corosync' is specified, view current status of
nodes from corosync instead. If 'both' is specified, view current status of nodes from both
corosync & pacemaker. If 'config' is specified, print nodes from corosync & pacemaker
configuration.
pcsd [<node>]...
Show current status of pcsd on nodes specified, or on all nodes configured in the local cluster if
no nodes are specified.
xml View xml version of status (output from crm_mon -r -1 -X).
wait [<timeout>]
Wait for the cluster to settle into stable state. Timeout can be specified as bare number which
describes number of seconds or number with unit (s or sec for seconds, m or min for minutes, h or
hr for hours). If 'timeout' is not specified or set to zero, it defaults to 60 minutes.
Example: pcs status wait 30min
query resource <resource-id> exists [--quiet]
Query the existence of the resource.
Print 'True' and exit with 0 if the query evaluates to true. Exit with 1 if an error occurs while
performing the query. Print 'False' and exit with 2 otherwise.
If --quiet is specified, do not print any output and just exit with the appropriate return code.
query resource <resource-id> is-stonith [--quiet]
Query if the resource is a stonith resource.
Print 'True' and exit with 0 if the query evaluates to true. Exit with 1 if an error occurs while
performing the query. Print 'False' and exit with 2 otherwise.
If --quiet is specified, do not print any output and just exit with the appropriate return code.
query resource <resource-id> is-type (primitive | group | clone [unique] [promotable] | bundle [unique])
[--quiet]
Query if the resource is of given type. Allows to query whether clones are globally unique or
promotable. Allows to query whether bundles are globally unique.
Print 'True' and exit with 0 if the query evaluates to true. Exit with 1 if an error occurs while
performing the query. Print 'False' and exit with 2 otherwise.
If --quiet is specified, do not print any output and just exit with the appropriate return code.
query resource <resource-id> get-type
Get type of a resource in pacemaker cluster. The output is one of 'primitive', 'group', 'clone',
'clone unique', 'clone promotable', 'clone unique promotable', 'bundle' or 'bundle unique'.
query resource <resource-id> is-state <state> [on-node <node-name>] [members all|any|none] [instances
all|any|none] [--quiet]
Query if the resource is in the given state. <state> can be one of 'active', 'blocked',
'demoting', 'disabled', 'enabled', 'failed', 'failure_ignored', 'locked_to', 'maintenance',
'managed', 'migrating', 'monitoring', 'orphaned', 'pending', 'promoted', 'promoting', 'started',
'starting', 'stopped', 'stopping', 'unmanaged' or 'unpromoted'.
States 'starting', 'stopping', 'promoting', 'demoting', 'migrating' and 'monitoring' describe that
resource operation (start, stop, promote, demote, migrate_from/to, or monitor) is currently in
progress on the resource. 'pending' will evaluate to true if any of these operations is currently
in progress on the resource.
State 'locked_to' allows to specify node name of the node that the resource is locked to.
With groups, the state is read and evaluated on the group first. If the state cannot be determined
from only the group, evaluate the state of the member resources and return true if the query is
true for ALL of the members. 'members' can be used to specify how to evaluate the states of the
members. If 'members' is specified, then always evaluate the query only on the member resources
without looking at the group itself. This means that for example queries for 'started' and
'stopped' on a group with one started and one stopped member will both evaluate as false at the
same time if 'members' is not specified or it is set to 'all'.
With clones and bundles, the state is read and evaluated on the clone or bundle first. If the
state cannot be determined from only the clone or bundle, evaluate the state on the instances and
return true if the query is true for ANY of the instances. 'instances' can be used to specify how
to evaluate the state of the instances. If 'instances' is specified, then always evaluate the
query only on the instances without looking at the clone or bundle themselves. This means that for
example queries for 'started' and 'stopped' on a clone with one started and one stopped instance
will both evaluate as true at the same time if 'instances' is not specified or it is set to 'any'.
'on-node' can be used to test whether the resource is in given state on the node with the given
name. If 'on-node' is used, then always check only the member resources for groups and instances
for clones or bundles.
Queries on the state of cloned or bundled resources are evaluated similarly to queries on clones
or bundles. Evaluate the state of every instance and return true if the query is true for ANY of
the instances. 'instances' can be used to specify how the query should be evaluated. It is
possible to query single specific instance of unique clones or bundles by using resource id
together with the suffix that distinguishes instances for unique clones and bundles.
Example: Query if any instance of resource is started
pcs status query resource resource_id is-state started
Example: Query if one specific instance is started
pcs status query resource resource_id:0 is-state started
Print 'True' and exit with 0 if the query evaluates to true. Exit with 1 if an error occurs while
performing the query. Print 'False' and exit with 2 otherwise.
If --quiet is specified, do not print any output and just exit with the appropriate return code.
query resource <resource-id> is-in-group [<group-id>] [--quiet]
Query if the resource is in any group or in a group with the specified id.
Print 'True' and exit with 0 if the query evaluates to true. Exit with 1 if an error occurs while
performing the query. Print 'False' and exit with 2 otherwise.
Print the id of the group on new line if the resource is in any group.
If --quiet is specified, do not print any output and just exit with the appropriate return code.
query resource <resource-id> is-in-clone [<clone-id>] [--quiet]
Query if the resource is in any clone or in a clone with the specified id. Resource that is in a
cloned group is considered to be in the clone itself.
Print 'True' and exit with 0 if the query evaluates to true. Exit with 1 if an error occurs while
performing the query. Print 'False' and exit with 2 otherwise.
Print the id of the clone on new line if the resource is in any clone.
If --quiet is specified, do not print any output and just exit with the appropriate return code.
query resource <resource-id> is-in-bundle [<bundle-id>] [--quiet]
Query if the resource is in any bundle or in a bundle with the specified id.
Print 'True' and exit with 0 if the query evaluates to true. Exit with 1 if an error occurs while
performing the query. Print 'False' and exit with 2 otherwise.
Print the id of the bundle on new line if the resource is in any bundle.
If --quiet is specified, do not print any output and just exit with the appropriate return code.
query resource <resource-id> get-nodes
Get all nodes on which the resource is running. With groups, return nodes on which any of the
members is running. For clones or bundles, return nodes on which any of the instances or replicas
are running.
Print each node name on new line.
query resource <resource-id> get-members
Get ids of member resources of the resource. Only useful for group, clone and bundle resources.
Print each member id on new line.
query resource <resource-id> get-index-in-group
Get an index of the resource in a group. The first resource in a group has an index of 0. Usable
only for resources that are in a group.
config
[show] View full cluster configuration.
backup [filename]
Creates the tarball containing the cluster configuration files. If filename is not specified the
standard output will be used.
restore [--local] [filename]
Restores the cluster configuration files on all nodes from the backup. If filename is not
specified the standard input will be used. If --local is specified only the files on the current
node will be restored.
checkpoint
List all available configuration checkpoints.
checkpoint view <checkpoint_number>
Show specified configuration checkpoint.
checkpoint diff <checkpoint_number> <checkpoint_number>
Show differences between the two specified checkpoints. Use checkpoint number 'live' to compare a
checkpoint to the current live configuration.
checkpoint restore <checkpoint_number>
Restore cluster configuration to specified checkpoint.
pcsd
certkey <certificate file> <key file>
Load custom certificate and key files for use in pcsd.
status [<node>]...
Show current status of pcsd on nodes specified, or on all nodes configured in the local cluster if
no nodes are specified.
sync-certificates
Sync pcsd certificates to all nodes in the local cluster.
deauth [<token>]...
Delete locally stored authentication tokens used by remote systems to connect to the local pcsd
instance. If no tokens are specified all tokens will be deleted. After this command is run other
nodes will need to re-authenticate against this node to be able to connect to it.
host
auth (<host name> [addr=<address>[:<port>]])... [-u <username>] [-p <password>]
Authenticate local pcs/pcsd against pcsd on specified hosts. It is possible to specify an address
and a port via which pcs/pcsd will communicate with each host. If an address is not specified a
host name will be used. If a port is not specified 2224 will be used.
deauth [<host name>]...
Delete authentication tokens which allow pcs/pcsd on the current system to connect to remote pcsd
instances on specified host names. If the current system is a member of a cluster, the tokens will
be deleted from all nodes in the cluster. If no host names are specified all tokens will be
deleted. After this command is run this node will need to re-authenticate against other nodes to
be able to connect to them.
node
attribute [[<node>] [--name <name>] | (--output-format text|cmd|json) | <node> <name>=<value> ...]
Manage node attributes. If no parameters are specified, show attributes of all nodes. If one
parameter is specified, show attributes of specified node. If --name is specified, show specified
attribute's value from all nodes. If more parameters are specified, set attributes of specified
node. Attributes can be removed by setting an attribute without a value. There are 3 formats of
output available: 'cmd', 'json' and 'text', default is 'text'. Format 'text' is a human friendly
output. Format 'cmd' prints pcs commands which can be used to recreate the same configuration.
Format 'json' is a machine oriented output of the configuration.
maintenance [--all | <node>...] [--wait[=n]]
Put specified node(s) into maintenance mode, if no nodes or options are specified the current node
will be put into maintenance mode, if --all is specified all nodes will be put into maintenance
mode. If --wait is specified, pcs will wait up to 'n' seconds for the node(s) to be put into
maintenance mode and then return 0 on success or 1 if the operation not succeeded yet. If 'n' is
not specified it defaults to 60 minutes.
unmaintenance [--all | <node>...] [--wait[=n]]
Remove node(s) from maintenance mode, if no nodes or options are specified the current node will
be removed from maintenance mode, if --all is specified all nodes will be removed from maintenance
mode. If --wait is specified, pcs will wait up to 'n' seconds for the node(s) to be removed from
maintenance mode and then return 0 on success or 1 if the operation not succeeded yet. If 'n' is
not specified it defaults to 60 minutes.
standby [--all | <node>...] [--wait[=n]]
Put specified node(s) into standby mode (the node specified will no longer be able to host
resources), if no nodes or options are specified the current node will be put into standby mode,
if --all is specified all nodes will be put into standby mode. If --wait is specified, pcs will
wait up to 'n' seconds for the node(s) to be put into standby mode and then return 0 on success or
1 if the operation not succeeded yet. If 'n' is not specified it defaults to 60 minutes.
unstandby [--all | <node>...] [--wait[=n]]
Remove node(s) from standby mode (the node specified will now be able to host resources), if no
nodes or options are specified the current node will be removed from standby mode, if --all is
specified all nodes will be removed from standby mode. If --wait is specified, pcs will wait up to
'n' seconds for the node(s) to be removed from standby mode and then return 0 on success or 1 if
the operation not succeeded yet. If 'n' is not specified it defaults to 60 minutes.
utilization [[<node>] [--name <name>] | (--output-format text|cmd|json) | <node> <name>=<value> ...]
Add specified utilization options to specified node. If node is not specified, shows utilization
of all nodes. If --name is specified, shows specified utilization value from all nodes. If
utilization options are not specified, shows utilization of specified node. Utilization option
should be in format name=value, value has to be integer. Options may be removed by setting an
option without a value. There are 3 formats of output available: 'cmd', 'json' and 'text', default
is 'text'. Format 'text' is a human friendly output. Format 'cmd' prints pcs commands which can be
used to recreate the same configuration. Format 'json' is a machine oriented output of the
configuration.
Example: pcs node utilization node1 cpu=4 ram= For the utilization configuration to be in effect,
cluster property 'placement-strategy' must be configured accordingly.
alert
[config] [--output-format text|cmd|json]
Show all configured alerts. There are 3 formats of output available: 'cmd', 'json' and 'text',
default is 'text'. Format 'text' is a human friendly output. Format 'cmd' prints pcs commands
which can be used to recreate the same configuration. Format 'json' is a machine oriented output
of the configuration.
create path=<path> [id=<alert-id>] [description=<description>] [options [<option>=<value>]...] [meta
[<meta-option>=<value>]...]
Define an alert handler with specified path. Id will be automatically generated if it is not
specified.
update <alert-id> [path=<path>] [description=<description>] [options [<option>=<value>]...] [meta
[<meta-option>=<value>]...]
Update an existing alert handler with specified id. Unspecified options will be kept unchanged. If
you wish to remove an option, set it to empty value, i.e. 'option_name='.
delete <alert-id> ...
Remove alert handlers with specified ids.
remove <alert-id> ...
Remove alert handlers with specified ids.
recipient add <alert-id> value=<recipient-value> [id=<recipient-id>] [description=<description>] [options
[<option>=<value>]...] [meta [<meta-option>=<value>]...]
Add new recipient to specified alert handler.
recipient update <recipient-id> [value=<recipient-value>] [description=<description>] [options
[<option>=<value>]...] [meta [<meta-option>=<value>]...]
Update an existing recipient identified by its id. Unspecified options will be kept unchanged. If
you wish to remove an option, set it to empty value, i.e. 'option_name='.
recipient delete <recipient-id> ...
Remove specified recipients.
recipient remove <recipient-id> ...
Remove specified recipients.
client
local-auth [<pcsd-port>] [-u <username>] [-p <password>]
Authenticate current user to local pcsd. This is required to run some pcs commands which may
require permissions of root user such as 'pcs cluster start'.
dr
config Display disaster-recovery configuration from the local node.
status [--full] [--hide-inactive]
Display status of the local and the remote site cluster (--full provides more details,
--hide-inactive hides inactive resources).
set-recovery-site <recovery site node>
Set up disaster-recovery with the local cluster being the primary site. The recovery site is
defined by a name of one of its nodes.
destroy
Permanently destroy disaster-recovery configuration on all sites.
tag
[config [<tag id>...]] [--output-format text|cmd|json]
Display configured tags. There are 3 formats of output available: 'cmd', 'json' and 'text',
default is 'text'. Format 'text' is a human friendly output. Format 'cmd' prints pcs commands
which can be used to recreate the same configuration. Format 'json' is a machine oriented output
of the configuration.
create <tag id> <id> [<id>]...
Create a tag containing the specified ids.
delete <tag id>...
Delete specified tags.
remove <tag id>...
Delete specified tags.
update <tag id> [add <id> [<id>]... [--before <id> | --after <id>]] [remove <id> [<id>]...]
Update a tag using the specified ids. Ids can be added, removed or moved in a tag. You can use
--before or --after to specify the position of the added ids relatively to some id already
existing in the tag. By adding ids to a tag they are already in and specifying --after or --before
you can move the ids in the tag.
EXAMPLES
Show all resources
# pcs resource config
Show options specific to the 'VirtualIP' resource
# pcs resource config VirtualIP
Create a new resource called 'VirtualIP' with options
# pcs resource create VirtualIP ocf:heartbeat:IPaddr2 ip=192.168.0.99 cidr_netmask=32 nic=eth2 op
monitor interval=30s
Create a new resource called 'VirtualIP' with options
# pcs resource create VirtualIP IPaddr2 ip=192.168.0.99 cidr_netmask=32 nic=eth2 op monitor
interval=30s
Change the ip address of VirtualIP and remove the nic option
# pcs resource update VirtualIP ip=192.168.0.98 nic=
Delete the VirtualIP resource
# pcs resource delete VirtualIP
Create the MyStonith stonith fence_virt device which can fence host 'f1'
# pcs stonith create MyStonith fence_virt pcmk_host_list=f1
Set the stonith-enabled property to false on the cluster (which disables stonith)
# pcs property set stonith-enabled=false
USING --FORCE IN PCS COMMANDS
Various pcs commands accept the --force option. Its purpose is to override some of checks that pcs is
doing or some of errors that may occur when a pcs command is run. When such error occurs, pcs will print
the error with a note it may be overridden. The exact behavior of the option is different for each pcs
command. Using the --force option can lead into situations that would normally be prevented by logic of
pcs commands and therefore its use is strongly discouraged unless you know what you are doing.
ENVIRONMENT VARIABLES
EDITOR
Path to a plain-text editor. This is used when pcs is requested to present a text for the user to
edit.
no_proxy, https_proxy, all_proxy, NO_PROXY, HTTPS_PROXY, ALL_PROXY
These environment variables (listed according to their priorities) control how pcs handles proxy
servers when connecting to cluster nodes. See curl(1) man page for details.
CHANGES IN PCS-0.12
This section summarizes the most important changes in commands done in pcs-0.12.x compared to pcs-0.11.x.
For detailed description of current commands see above.
Pacemaker 3 changes
Following pacemaker 3, pcs has dropped support for:
nagios and upstart resource classes
rkt containers in bundle resources
multiple rules in a single location constraint
Legacy role names
Legacy role names and derived options and keywords are no longer accepted, use 'Promoted', 'Unpromoted',
--promoted, 'promotable', 'promoted-max'.
Mixing resources and stonith resources
Using stonith resources in 'pcs resource' commands and resources in 'pcs stonith' commands is no longer
allowed.
Resources validation
When creating or updating a resource or stonith, its options are now validated by the resource or stonith
agent. Unless --agent-validation is specified, this does not prevent misconfiguring the resource or
stonith by exiting with an error. In pcs-0.11, the validation was done only when --agent-validation was
specified.
Pacemaker rules
Several date-spec and duration options have been removed in pacemaker 3. Therefore, pcs no longer
supports them either. Previously supported date-spec and duration options were: hours, monthdays,
weekdays, yearsdays, months, weeks, years, weekyears, moon. New date-spec options are: seconds, minutes,
hours, monthdays, weekdays, yeardays, months, weeks, years, weekyears. New duration options are: seconds,
minutes, hours, days, weeks, months, years.
Using spaces in dates in location constraint rules is no longer allowed.
Rules are supposed to be specified as a single string argument. Specifying rules as multiple arguments
has been deprecated and might be removed in a future release.
--yes instead of --force as an alternative to interactive confirmation
Some pcs commands require interactive confirmation to proceed. Previously, this could be overridden by
specifying --force. Since pcs-0.12, using --force for this purpose is deprecated in favor of --yes. The
--force flag is kept to override validation errors, which was its originally intended use. Affected
commands are: 'pcs cluster destroy', 'pcs quorum unblock', 'pcs stonith confirm', 'pcs stonith sbd device
setup' and 'pcs stonith sbd watchdog test'.
acl
role assign | unassign
The possibility of not specifying 'user' or 'group' keyword is now deprecated and might be removed
in a future release.
show This deprecated command has been removed. Use 'pcs acl config' instead
alert
show This deprecated command has been removed. Use 'pcs alert config' instead.
cluster
certkey
This deprecated command has been removed. Use 'pcs pcsd certkey' instead.
node add-remote | add-guest
--wait option is deprecated. Instead, use the 'pcs status wait' command to wait for the cluster to
settle into stable state. Use the 'pcs status query resource' commands to verify that the resource
is in the expected state after the wait.
node remove-remote | delete-remote
These commands no longer remove location constraints referencing the node name of the removed
remote node.
pcsd-status
This deprecated command has been removed. Use 'pcs status pcsd' or 'pcs pcsd status' instead.
constraint
colocation add
Specifying score as a standalone value is deprecated in favor of score=value. This makes the
command consistent with other commands for creating constraints.
list This deprecated command, as well as its variants 'pcs constraint [location | colocation | order |
ticket] list', has been removed. Use 'pcs constraint [location | colocation | order | ticket]
config' instead.
location add
Specifying score as a standalone value is deprecated in favor of score=value. This makes the
command consistent with other commands for creating constraints.
rule add | delete | remove
These deprecated commands have been removed, as pacemaker 3 no longer allows location constraints
to contain more than one rule.
show This deprecated command, as well as its variants 'pcs constraint [location | colocation | order |
ticket] show', has been removed. Use 'pcs constraint [location | colocation | order | ticket]
config' instead.
property
list This deprecated command has been removed. Use 'pcs property config' instead.
show This deprecated command has been removed. Use 'pcs property config' instead.
resource
--wait option
This option is deprecated in all resource commands except 'pcs resource restart' and 'pcs resource
move'. Instead, use the 'pcs status wait' command to wait for the cluster to settle into stable
state. Use the 'pcs status query resource' commands to verify that the resource is in the expected
state after the wait.
defaults <name>=<value>...
This deprecated command has been removed. Use 'pcs resource defaults update <name>=<value>...' if
you only manage one set of defaults, or 'pcs resource defaults set' if you manage several sets of
defaults.
move Since pcs-0.11, this command automatically deletes location constraints used for moving a
resource. Therefore, its deprecated flag --autodelete has been removed.
op defaults <name>=<value>...
This deprecated command has been removed. Use 'pcs resource op defaults update <name>=<value>...'
if you only manage one set of defaults, or 'pcs resource op defaults set' if you manage several
sets of defaults.
remove | delete
Removing resources representing remote and guest nodes is no longer possible. Use 'pcs cluster
node remove-remote' to remove remote nodes and 'pcs cluster node remove-guest' to remove guest
nodes.
stonith
create --group
Creating stonith resources in groups is no longer allowed.
defaults <name>=<value>...
This deprecated command has been removed. Use 'pcs stonith defaults update <name>=<value>...' if
you only manage one set of defaults, or 'pcs stonith defaults set' if you manage several sets of
defaults.
disable
Deprecated options --brief, --no-strict, --safe and --simulate have been removed.
level add | clear | delete | remove
Delimiting stonith devices with a comma is no longer allowed.
Ambiguous syntax of 'pcs stonith level clear | delete | remove' is no longer supported.
op defaults <name>=<value>...
This deprecated command has been removed. Use 'pcs stonith op defaults update <name>=<value>...'
if you only manage one set of defaults, or 'pcs stonith op defaults set' if you manage several
sets of defaults.
tag
list This deprecated command has been removed. Use 'pcs tag config' instead.
CHANGES IN PCS-0.11
This section summarizes the most important changes in commands done in pcs-0.11.x compared to pcs-0.10.x.
For detailed description of current commands see above.
Legacy role names
Roles 'Master' and 'Slave' are deprecated and should not be used anymore. Instead, use 'Promoted' and
'Unpromoted', respectively. Similarly, --master has been deprecated and replaced with --promoted.
cluster
uidgid rm
This command has been replaced with 'pcs cluster uidgid delete' and 'pcs cluster uidgid remove'.
resource
move The 'pcs resource move' now automatically removes location constraint used for moving a resource.
It is equivalent of 'pcs resource move --autodelete' from pcs-0.10.9. Legacy functionality of the
'resource move' command is still available as 'resource move-with-constraint <resource id>'.
show --full
This command has been replaced with 'pcs resource config'.
show --groups
This command has been replaced with 'pcs resource group list'.
show This command has been replaced with 'pcs resource status'.
stonith
show --full
This command has been replaced with 'pcs stonith config'.
show This command has been replaced with 'pcs stonith status'.
CHANGES IN PCS-0.10
This section summarizes the most important changes in commands done in pcs-0.10.x compared to pcs-0.9.x.
For detailed description of current commands see above.
acl
show The 'pcs acl show' command has been deprecated and will be removed. Please use 'pcs acl config'
instead. Applicable in pcs-0.10.9 and newer.
alert
show The 'pcs alert show' command has been deprecated and will be removed. Please use 'pcs alert
config' instead. Applicable in pcs-0.10.9 and newer.
cluster
auth The 'pcs cluster auth' command only authenticates nodes in a local cluster and does not accept a
node list. The new command for authentication is 'pcs host auth'. It allows one to specify host
names, addresses and pcsd ports.
node add
Custom node names and Corosync 3.x with knet are fully supported now, therefore the syntax has
been completely changed.
The --device and --watchdog options have been replaced with 'device' and 'watchdog' options,
respectively.
pcsd-status
The 'pcs cluster pcsd-status' command has been deprecated and will be removed. Please use 'pcs
pcsd status' or 'pcs status pcsd' instead. Applicable in pcs-0.10.9 and newer.
quorum This command has been replaced with 'pcs quorum'.
remote-node add
This command has been replaced with 'pcs cluster node add-guest'.
remote-node remove
This command has been replaced with 'pcs cluster node delete-guest' and its alias 'pcs cluster
node remove-guest'.
setup Custom node names and Corosync 3.x with knet are fully supported now, therefore the syntax has
been completely changed.
The --name option has been removed. The first parameter of the command is the cluster name now.
The --local option has been replaced with --corosync_conf <path>.
standby
This command has been replaced with 'pcs node standby'.
uidgid rm
This command has been deprecated, use 'pcs cluster uidgid delete' or 'pcs cluster uidgid remove'
instead.
unstandby
This command has been replaced with 'pcs node unstandby'.
verify The -V option has been replaced with --full.
To specify a filename, use the -f option.
constraint
list The 'pcs constraint list' command, as well as its variants 'pcs constraint [location | colocation
| order | ticket] list', has been deprecated and will be removed. Please use 'pcs constraint
[location | colocation | order | ticket] config' instead. Applicable in pcs-0.10.9 and newer.
show The 'pcs constraint show' command, as well as its variants 'pcs constraint [location | colocation
| order | ticket] show', has been deprecated and will be removed. Please use 'pcs constraint
[location | colocation | order | ticket] config' instead. Applicable in pcs-0.10.9 and newer.
pcsd
clear-auth
This command has been replaced with 'pcs host deauth' and 'pcs pcsd deauth'.
property
list The 'pcs property list' command has been deprecated and will be removed. Please use 'pcs property
config' instead. Applicable in pcs-0.10.9 and newer.
set The --node option is no longer supported. Use the 'pcs node attribute' command to set node
attributes.
show The --node option is no longer supported. Use the 'pcs node attribute' command to view node
attributes.
The 'pcs property show' command has been deprecated and will be removed. Please use 'pcs property
config' instead. Applicable in pcs-0.10.9 and newer.
unset The --node option is no longer supported. Use the 'pcs node attribute' command to unset node
attributes.
resource
create The 'master' keyword has been changed to 'promotable'.
failcount reset
The command has been removed as 'pcs resource cleanup' is doing exactly the same job.
master This command has been replaced with 'pcs resource promotable'.
show Previously, this command displayed either status or configuration of resources depending on the
parameters specified. This was confusing, therefore the command was replaced by several new
commands. To display resources status, run 'pcs resource' or 'pcs resource status'. To display
resources configuration, run 'pcs resource config' or 'pcs resource config <resource name>'. To
display configured resource groups, run 'pcs resource group list'.
status
groups This command has been replaced with 'pcs resource group list'.
stonith
level add | clear | delete | remove
Delimiting stonith devices with a comma is deprecated, use a space instead. Applicable in
pcs-0.10.9 and newer.
level clear
Syntax of the command has been fixed so that it is not ambiguous any more. New syntax is 'pcs
stonith level clear [target <target> | stonith <stonith id>...]'. Old syntax 'pcs stonith level
clear [<target> | <stonith ids>]' is deprecated but still functional in pcs-0.10.x. Applicable in
pcs-0.10.9 and newer.
level delete | remove
Syntax of the command has been fixed so that it is not ambiguous any more. New syntax is 'pcs
stonith level delete | remove [target <target>] [stonith <stonith id>]...'. Old syntax 'pcs
stonith level delete | remove [<target>] [<stonith id>]...' is deprecated but still functional in
pcs-0.10.x. Applicable in pcs-0.10.9 and newer.
sbd device setup
The --device option has been replaced with the 'device' option.
sbd enable
The --device and --watchdog options have been replaced with 'device' and 'watchdog' options,
respectively.
show Previously, this command displayed either status or configuration of stonith resources depending
on the parameters specified. This was confusing, therefore the command was replaced by several new
commands. To display stonith resources status, run 'pcs stonith' or 'pcs stonith status'. To
display stonith resources configuration, run 'pcs stonith config' or 'pcs stonith config <stonith
name>'.
tag
list The 'pcs tag list' command has been deprecated and will be removed. Please use 'pcs tag config'
instead. Applicable in pcs-0.10.9 and newer.
SEE ALSO
http://clusterlabs.org/doc/
pcsd(8), pcs_snmp_agent(8)
corosync_overview(8), votequorum(5), corosync.conf(5), corosync-qdevice(8), corosync-qdevice-tool(8),
corosync-qnetd(8), corosync-qnetd-tool(8)
pacemaker-controld(7), pacemaker-fenced(7), pacemaker-schedulerd(7), crm_mon(8), crm_report(8),
crm_simulate(8)
boothd(8), sbd(8)
pcs 0.12.1 2025-07-08 PCS(8)