Ubuntu Manpage: mpstat - Report processors related statistics.

Provided by: sysstat_12.7.7-0ubuntu1_amd64

NAME

       mpstat - Report processors related statistics.

SYNOPSIS

       mpstat [ -A ] [ --dec={ 0 | 1 | 2 } ] [ -H ] [ -n ] [ -u ] [ -T ] [ -V ] [ -I { keyword[,...] | ALL } ] [
       -N { node_list | ALL } ] [ -o JSON ] [ -P { cpu_list | ALL } ] [ interval [ count ] ]

DESCRIPTION

       The  mpstat  command writes to standard output activities for each available processor, processor 0 being
       the first one.  Global average activities among all processors are also reported.  The mpstat command can
       be used on both SMP and UP machines, but in the latter, only global average activities will  be  printed.
       If no activity has been selected, then the default report is the CPU utilization report.

       The  interval parameter specifies the amount of time in seconds between each report.  A value of 0 (or no
       parameters at all) indicates that processors statistics are to be reported  for  the  time  since  system
       startup  (boot).  The count parameter can be specified in conjunction with the interval parameter if this
       one is not set to zero. The value of count determines the number of reports generated at interval seconds
       apart. If the interval parameter is specified without the count parameter, the mpstat  command  generates
       reports continuously.

OPTIONS

-A This option is equivalent to specifying -n -u -I ALL. This option also implies specifying -N ALL
-P ALL unless these options are explicitly set on the command line.

--dec={ 0 | 1 | 2 }
Specify the number of decimal places to use (0 to 2, default value is 2).

-H Also detect and display statistics for physically hotplugged vCPUs.

-I { keyword[,...] | ALL }
Report interrupts statistics. Possible keywords are CPU, SCPU, and SUM.

With the CPU keyword, the number of each individual interrupt received per second by the CPU or
CPUs is displayed. Interrupts are those listed in /proc/interrupts file.

With the SCPU keyword, the number of each individual software interrupt received per second by the
CPU or CPUs is displayed. This option works only with kernels 2.6.31 and later. Software
interrupts are those listed in /proc/softirqs file.

With the SUM keyword, the mpstat command reports the total number of interrupts per processor.
The following values are displayed:

CPU Processor number. The keyword all indicates that statistics are calculated as averages
among all processors.

intr/s Show the total number of interrupts received per second by the CPU or CPUs.

The ALL keyword is equivalent to specifying all the keywords above and therefore all the
interrupts statistics are displayed.

-N { node_list | ALL }
Indicate the NUMA nodes for which statistics are to be reported. node_list is a list of comma-
separated values or range of values (e.g., 0,2,4-7,12-). Note that node all is the global average
among all nodes. The ALL keyword indicates that statistics are to be reported for all nodes.

-n Report summary CPU statistics based on NUMA node placement. The following values are displayed:

NODE Logical NUMA node number. The keyword all indicates that statistics are calculated as
averages among all nodes.

All the other fields are the same as those displayed with option -u (see below).

-o JSON
Display the statistics in JSON (JavaScript Object Notation) format. JSON output field order is
undefined, and new fields may be added in the future.

-P { cpu_list | ALL }
Indicate the processors for which statistics are to be reported. cpu_list is a list of comma-
separated values or range of values (e.g., 0,2,4-7,12-). Note that processor 0 is the first
processor, and processor all is the global average among all processors. The ALL keyword
indicates that statistics are to be reported for all processors. Offline processors are not
displayed.

-T Display topology elements in the CPU report (see option -u below). The following elements are
displayed:

CORE Logical core number.

SOCK Logical socket number.

NODE Logical NUMA node number.

-u Report CPU utilization. The following values are displayed:

CPU Processor number. The keyword all indicates that statistics are calculated as averages
among all processors.

%usr Show the percentage of CPU utilization that occurred while executing at the user level
(application).

%nice Show the percentage of CPU utilization that occurred while executing at the user level with
nice priority.

%sys Show the percentage of CPU utilization that occurred while executing at the system level
(kernel). Note that this does not include time spent servicing hardware and software
interrupts.

%iowait
Show the percentage of time that the CPU or CPUs were idle during which the system had an
outstanding disk I/O request.

%irq Show the percentage of time spent by the CPU or CPUs to service hardware interrupts.

%soft Show the percentage of time spent by the CPU or CPUs to service software interrupts.

%steal Show the percentage of time spent in involuntary wait by the virtual CPU or CPUs while the
hypervisor was servicing another virtual processor.

%guest Show the percentage of time spent by the CPU or CPUs to run a virtual processor.

%gnice Show the percentage of time spent by the CPU or CPUs to run a niced guest.

%idle Show the percentage of time that the CPU or CPUs were idle and the system did not have an
outstanding disk I/O request.

-V Print version number then exit.

ENVIRONMENT

       The mpstat command takes into account the following environment variable:

       S_COLORS
              By default statistics are displayed in color when the output is connected to a terminal.  Use this
              variable  to change the settings. Possible values for this variable are never, always or auto (the
              latter is equivalent to the default settings).
              Please note that the color (being red, yellow, or some other color) used to display a value is not
              indicative of any kind of issue simply because of the color. It only indicates different ranges of
              values.

       S_COLORS_SGR
              Specify the colors and other attributes used to display statistics on the terminal.  Its value  is
              a  colon-separated  list  of  capabilities  that defaults to I=32;22:N=34;1:W=35;1:X=31;1:Z=34;22.
              Supported capabilities are:

              I=     SGR (Select Graphic Rendition) substring for CPU number.

              N=     SGR substring for non-zero statistics values.

              W= (or M=)
                     SGR substring for percentage values in the range from 75% to 90% (or in the  range  10%  to
                     25% depending on the metric's meaning).

              X= (or H=)
                     SGR substring for percentage values greater than or equal to 90% (or lower than or equal to
                     10% depending on the metric's meaning).

              Z=     SGR substring for zero values.

       S_TIME_FORMAT
              If this variable exists and its value is ISO then the current locale will be ignored when printing
              the  date  in  the  report  header.   The mpstat command will use the ISO 8601 format (YYYY-MM-DD)
              instead.  The timestamp will also be compliant with ISO 8601 format.

EXAMPLES

       mpstat 2 5
              Display five reports of global statistics among all processors at two second intervals.

       mpstat -P ALL 2 5
              Display five reports of statistics for all processors at two second intervals.

BUGS

       /proc filesystem must be mounted for the mpstat command to work.

FILES

       /proc contains various files with system statistics.

AUTHOR

       Sebastien Godard (sysstat <at> orange.fr)