tmd710_tncsetup
tool to configure the TNC on several Kenwood radios
- Provided by: tmd710-tncsetup (Version: 1.13.1-3build1)
- Report a bug
SYNOPSIS
tmd710_tncsetup [options]
DESCRIPTION
This manual page documents briefly the tmd710-tncsetup command.
OPTIONS
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below. You must supply at least two arguments: the band (0 for Band A, 1 for Band B) and the serial port
- -B, --band
- the frequency band to use (0 for Band A or 1 for Band B)
- -S, --serialport
- the serial port to use for communication with the operation panel
- -b, --baudrate
- sets the HBAUD parameter (TNC speed, 1200 or 9600 baud)
- -m, --maxframe
- sets the MAXFRAME parameter (1-7)
- -p, --paclen
- sets the PACLEN parameter (0-255)
- -d, --txdelay
- sets the TXDELAY parameter (0-120)
- -s, --software-flow
- configure the TNC for software flow-control
- -h, --hardware-flow
- configure the TNC for hardware flow-control
- -c, --callsign
- configure the callsign
- -i
- Initialize TNC (default is into Packet KISS mode) 1 : TNC off 2 : Packet command mode only
- -V, --version
- display the version
AUTHOR
Written by Francois Marier <va7gpl@fmarier.org>
Project Homepage: https://github.com/fmarier/tmd710_tncsetup