qemu-storage-daemon-qmp-ref
QEMU Storage Daemon QMP Reference Manual
- Provided by: qemu-utils-hwe (Version: 1:10.2.1+ds-1ubuntu4)
- Source: qemu-hwe
- Report a bug
INTRODUCTION
This manual describes the commands and events supported by the QEMU storage daemon QMP.
For locating a particular item, please see the QSD Index <>.
The following notation is used in examples:
-> ... text sent by client (commands) ... <- ... text sent by server (command responses and events) ...
Example text is formatted for readability. However, in real protocol usage, its commonly emitted as a single line.
Please refer to the QEMU Machine Protocol Specification <> for the general format of commands, responses, and events.
COMMON DATA TYPES
- Enum IoOperationType (Since: 2.1)
- An enumeration of the I/O operation types
- Enum OnOffAuto (Since: 2.2)
- An enumeration of three options: on, off, and auto
- Enum OnOffSplit (Since: 2.6)
- An enumeration of three values: on, off, and split
- Alternate StrOrNull (Since: 2.10)
- This is a string value or the explicit lack of a string (null pointer in C). Intended for cases when 'optional absent' already has a different meaning.
- Enum OffAutoPCIBAR (Since: 2.12)
- An enumeration of options for specifying a PCI BAR
- off -- The specified feature is disabled
- auto -- The PCI BAR for the feature is automatically selected
- bar0 -- PCI BAR0 is used for the feature
- bar1 -- PCI BAR1 is used for the feature
- bar2 -- PCI BAR2 is used for the feature
- bar3 -- PCI BAR3 is used for the feature
- bar4 -- PCI BAR4 is used for the feature
- bar5 -- PCI BAR5 is used for the feature
- Enum PCIELinkSpeed (Since: 4.0)
- An enumeration of PCIe link speeds in units of GT/s
- 2_5 -- 2.5GT/s
- 5 -- 5.0GT/s
- 8 -- 8.0GT/s
- 16 -- 16.0GT/s
- 32 -- 32.0GT/s (since 9.0)
- 64 -- 64.0GT/s (since 9.0)
- Enum PCIELinkWidth (Since: 4.0)
- An enumeration of PCIe link width
- Enum HostMemPolicy (Since: 2.1)
- Host memory policy types
- default -- restore default policy, remove any nondefault policy
- preferred -- set the preferred host nodes for allocation
- bind -- a strict policy that restricts memory allocation to the host nodes specified
- interleave -- memory allocations are interleaved across the set of host nodes specified
- Enum NetFilterDirection (Since: 2.5)
- Indicates whether a netfilter is attached to a netdev's transmit queue or receive queue or both.
- all -- the filter is attached both to the receive and the transmit queue of the netdev (default).
- rx -- the filter is attached to the receive queue of the netdev, where it will receive packets sent to the netdev.
- tx -- the filter is attached to the transmit queue of the netdev, where it will receive packets sent by the netdev.
- Enum GrabToggleKeys (Since: 4.0)
- Key combinations to toggle input-linux between host and guest.
- ctrl-ctrl -- left and right control key
- alt-alt -- left and right alt key
- shift-shift -- left and right shift key
- meta-meta -- left and right meta key
- scrolllock -- scroll lock key
- ctrl-scrolllock -- either control key and scroll lock key
SOCKET DATA TYPES
- Enum NetworkAddressFamily (Since: 2.1)
- The network address family
- ipv4 -- IPV4 family
- ipv6 -- IPV6 family
- unix -- unix socket
- vsock -- vsock family (since 2.8)
- unknown -- otherwise
- Object InetSocketAddress (Since: 1.3)
- Captures a socket address or address range in the Internet namespace.
- numeric (boolean, optional) -- true if the host/port are guaranteed to be numeric, false if name resolution should be attempted. Defaults to false. (Since 2.9)
- to (int, optional) -- If present, this is range of possible addresses, with port between port and to.
- ipv4 (boolean, optional) -- whether to accept IPv4 addresses, default try both IPv4 and IPv6
- ipv6 (boolean, optional) -- whether to accept IPv6 addresses, default try both IPv4 and IPv6
- keep-alive (boolean, optional) -- enable keep-alive when connecting to/listening on this socket. (Since 4.2, not supported for listening sockets until 10.1)
- keep-alive-count (int, optional) -- number of keep-alive packets sent before the connection is closed. Only supported for TCP sockets on systems where TCP_KEEPCNT socket option is defined (this includes Linux, Windows, macOS, FreeBSD, but not OpenBSD). When set to 0, system setting is used. (Since 10.1)
- keep-alive-idle (int, optional) -- time in seconds the connection needs to be idle before sending a keepalive packet. Only supported for TCP sockets on systems where TCP_KEEPIDLE socket option is defined (this includes Linux, Windows, macOS, FreeBSD, but not OpenBSD). When set to 0, system setting is used. (Since 10.1)
- keep-alive-interval (int, optional) -- time in seconds between keep-alive packets. Only supported for TCP sockets on systems where TCP_KEEPINTVL is defined (this includes Linux, Windows, macOS, FreeBSD, but not OpenBSD). When set to 0, system setting is used. (Since 10.1)
- mptcp (boolean, optional) -- enable multi-path TCP. (Since 6.1)
- The members of InetSocketAddressBase.
- Object UnixSocketAddress (Since: 1.3)
- Captures a socket address in the local ("Unix socket") namespace.
- path (string) -- filesystem path to use
- abstract (boolean, optional) -- if true, this is a Linux abstract socket address. path will be prefixed by a null byte, and optionally padded with null bytes. Defaults to false. (Since 5.1)
- tight (boolean, optional) -- if false, pad an abstract socket address with enough null bytes to make it fill struct sockaddr_un member sun_path. Defaults to true. (Since 5.1)
- Object VsockSocketAddress (Since: 2.8)
- Captures a socket address in the vsock namespace.
Note:
String types are used to allow for possible future
hostname or service resolution support.
- Object FdSocketAddress (Since: 1.2)
- A file descriptor name or number.
- str (string) -- decimal is for file descriptor number, otherwise it's a file descriptor name. Named file descriptors are permitted in monitor commands, in combination with the getfd <#command-QMP-misc.getfd> command. Decimal file descriptors are permitted at startup or other contexts where no monitor context is active.
- Object SocketAddressLegacy (Since: 1.3)
- Captures the address of a socket, which could also be a named file descriptor
- type (SocketAddressType) -- Transport type
- When type is inet: The members of InetSocketAddressWrapper.
- When type is unix: The members of UnixSocketAddressWrapper.
- When type is vsock: The members of VsockSocketAddressWrapper.
- When type is fd: The members of FdSocketAddressWrapper.
- Enum SocketAddressType (Since: 2.9)
- Available SocketAddress types
- inet -- Internet address
- unix -- Unix domain socket
- vsock -- VMCI address
- fd -- Socket file descriptor
- Object SocketAddress (Since: 2.9)
- Captures the address of a socket, which could also be a socket file descriptor
- type (SocketAddressType) -- Transport type
- When type is inet: The members of InetSocketAddress.
- When type is unix: The members of UnixSocketAddress.
- When type is vsock: The members of VsockSocketAddress.
- When type is fd: The members of FdSocketAddress.
CRYPTOGRAPHY
- Enum QCryptoTLSCredsEndpoint (Since: 2.5)
- The type of network endpoint that will be using the credentials. Most types of credential require different setup / structures depending on whether they will be used in a server versus a client.
- client -- the network endpoint is acting as the client
- server -- the network endpoint is acting as the server
- Enum QCryptoSecretFormat (Since: 2.6)
- The data format that the secret is provided in
- raw -- raw bytes. When encoded in JSON only valid UTF-8 sequences can be used
- base64 -- arbitrary base64 encoded binary data
- Enum QCryptoHashAlgo (Since: 2.6)
- The supported algorithms for computing content digests
- md5 -- MD5. Should not be used in any new code, legacy compat only
- sha1 -- SHA-1. Should not be used in any new code, legacy compat only
- sha224 -- SHA-224. (since 2.7)
- sha256 -- SHA-256. Current recommended strong hash.
- sha384 -- SHA-384. (since 2.7)
- sha512 -- SHA-512. (since 2.7)
- ripemd160 -- RIPEMD-160. (since 2.7)
- sm3 -- SM3. (since 9.2.0)
- Enum QCryptoCipherAlgo (Since: 2.6)
- The supported algorithms for content encryption ciphers
- aes-128 -- AES with 128 bit / 16 byte keys
- aes-192 -- AES with 192 bit / 24 byte keys
- aes-256 -- AES with 256 bit / 32 byte keys
- des -- DES with 56 bit / 8 byte keys. Do not use except in VNC. (since 6.1)
- 3des -- 3DES(EDE) with 192 bit / 24 byte keys (since 2.9)
- cast5-128 -- Cast5 with 128 bit / 16 byte keys
- serpent-128 -- Serpent with 128 bit / 16 byte keys
- serpent-192 -- Serpent with 192 bit / 24 byte keys
- serpent-256 -- Serpent with 256 bit / 32 byte keys
- twofish-128 -- Twofish with 128 bit / 16 byte keys
- twofish-192 -- Twofish with 192 bit / 24 byte keys
- twofish-256 -- Twofish with 256 bit / 32 byte keys
- sm4 -- SM4 with 128 bit / 16 byte keys (since 9.0)
- Enum QCryptoCipherMode (Since: 2.6)
- The supported modes for content encryption ciphers
- ecb -- Electronic Code Book
- cbc -- Cipher Block Chaining
- xts -- XEX with tweaked code book and ciphertext stealing
- ctr -- Counter (Since 2.8)
- Enum QCryptoIVGenAlgo (Since: 2.6)
- The supported algorithms for generating initialization vectors for full disk encryption. The 'plain' generator should not be used for disks with sector numbers larger than 2^32, except where compatibility with pre-existing Linux dm-crypt volumes is required.
- plain -- 64-bit sector number truncated to 32-bits
- plain64 -- 64-bit sector number
- essiv -- 64-bit sector number encrypted with a hash of the encryption key
- Enum QCryptoBlockFormat (Since: 2.6)
- The supported full disk encryption formats
- qcow -- QCow/QCow2 built-in AES-CBC encryption. Use only for liberating data from old images.
- luks -- LUKS encryption format. Recommended for new images
- Object QCryptoBlockOptionsBase (Since: 2.6)
- The common options that apply to all full disk encryption formats
- Object QCryptoBlockOptionsQCow (Since: 2.6)
- The options that apply to QCow/QCow2 AES-CBC encryption format
- key-secret (string, optional) -- the ID of a QCryptoSecret object providing the decryption key. Mandatory except when probing image for metadata only.
- Object QCryptoBlockOptionsLUKS (Since: 2.6)
- The options that apply to LUKS encryption format
- key-secret (string, optional) -- the ID of a QCryptoSecret object providing the decryption key. Mandatory except when probing image for metadata only.
- Object QCryptoBlockCreateOptionsLUKS (Since: 2.6)
- The options that apply to LUKS encryption format initialization
- cipher-alg (QCryptoCipherAlgo, optional) -- the cipher algorithm for data encryption. Currently defaults to 'aes-256'.
- cipher-mode (QCryptoCipherMode, optional) -- the cipher mode for data encryption. Currently defaults to 'xts'
- ivgen-alg (QCryptoIVGenAlgo, optional) -- the initialization vector generator. Currently defaults to 'plain64'
- ivgen-hash-alg (QCryptoHashAlgo, optional) -- the initialization vector generator hash. Currently defaults to 'sha256'
- hash-alg (QCryptoHashAlgo, optional) -- the master key hash algorithm. Currently defaults to 'sha256'
- iter-time (int, optional) -- number of milliseconds to spend in PBKDF passphrase processing. Currently defaults to 2000. (since 2.8)
- The members of QCryptoBlockOptionsLUKS.
- Object QCryptoBlockOpenOptions (Since: 2.6)
- The options that are available for all encryption formats when opening an existing volume
- The members of QCryptoBlockOptionsBase.
- When format is qcow: The members of QCryptoBlockOptionsQCow.
- When format is luks: The members of QCryptoBlockOptionsLUKS.
- Object QCryptoBlockCreateOptions (Since: 2.6)
- The options that are available for all encryption formats when initializing a new volume
- The members of QCryptoBlockOptionsBase.
- When format is qcow: The members of QCryptoBlockOptionsQCow.
- When format is luks: The members of QCryptoBlockCreateOptionsLUKS.
- Object QCryptoBlockInfoBase (Since: 2.7)
- The common information that applies to all full disk encryption formats
- Object QCryptoBlockInfoLUKSSlot (Since: 2.7)
- Information about the LUKS block encryption key slot options
- active (boolean) -- whether the key slot is currently in use
- key-offset (int) -- offset to the key material in bytes
- iters (int, optional) -- number of PBKDF2 iterations for key material
- stripes (int, optional) -- number of stripes for splitting key material
- Object QCryptoBlockInfoLUKS (Since: 2.7)
- Information about the LUKS block encryption options
- cipher-alg (QCryptoCipherAlgo) -- the cipher algorithm for data encryption
- cipher-mode (QCryptoCipherMode) -- the cipher mode for data encryption
- ivgen-alg (QCryptoIVGenAlgo) -- the initialization vector generator
- ivgen-hash-alg (QCryptoHashAlgo, optional) -- the initialization vector generator hash
- hash-alg (QCryptoHashAlgo) -- the master key hash algorithm
- detached-header (boolean) -- whether the LUKS header is detached (Since 9.0)
- payload-offset (int) -- offset to the payload data in bytes
- master-key-iters (int) -- number of PBKDF2 iterations for key material
- uuid (string) -- unique identifier for the volume
- slots ([QCryptoBlockInfoLUKSSlot]) -- information about each key slot
- Object QCryptoBlockInfo (Since: 2.7)
- Information about the block encryption options
- The members of QCryptoBlockInfoBase.
- When format is luks: The members of QCryptoBlockInfoLUKS.
- Enum QCryptoBlockLUKSKeyslotState (Since: 5.1)
- Defines state of keyslots that are affected by the update
- active -- The slots contain the given password and marked as active
- inactive -- The slots are erased (contain garbage) and marked as inactive
- Object QCryptoBlockAmendOptionsLUKS (Since: 5.1)
- This struct defines the update parameters that activate/de-activate set of keyslots
- state (QCryptoBlockLUKSKeyslotState) -- the desired state of the keyslots
- new-secret (string, optional) -- The ID of a QCryptoSecret object providing the password to be written into added active keyslots
- old-secret (string, optional) -- Optional (for deactivation only). If given will deactivate all keyslots that match password located in QCryptoSecret with this ID
- iter-time (int, optional) -- Optional (for activation only). Number of milliseconds to spend in PBKDF passphrase processing for the newly activated keyslot. Currently defaults to 2000.
- keyslot (int, optional) --
Optional. ID of the keyslot to activate/deactivate. For keyslot activation, keyslot should not be active already (this is unsafe to update an active keyslot), but possible if 'force' parameter is given. If keyslot is not given, first free keyslot will be written.
For keyslot deactivation, this parameter specifies the exact keyslot to deactivate
- secret (string, optional) -- Optional. The ID of a QCryptoSecret object providing the password to use to retrieve current master key. Defaults to the same secret that was used to open the image
- Object QCryptoBlockAmendOptions (Since: 5.1)
- The options that are available for all encryption formats when amending encryption settings
- The members of QCryptoBlockOptionsBase.
- When format is luks: The members of QCryptoBlockAmendOptionsLUKS.
- Object SecretCommonProperties (Since: 2.6)
- Properties for objects of classes derived from secret-common.
- format (QCryptoSecretFormat, optional) -- the data format that the secret is provided in (default: raw)
- keyid (string, optional) -- the name of another secret that should be used to decrypt the provided data. If not present, the data is assumed to be unencrypted.
- iv (string, optional) -- the random initialization vector used for encryption of this particular secret. Should be a base64 encrypted string of the 16-byte IV. Mandatory if keyid is given. Ignored if keyid is absent.
- Object SecretProperties (Since: 2.6)
- Properties for secret objects.
Either data or file must be provided, but not both.
- data (string, optional) -- the associated with the secret from
- file (string, optional) -- the filename to load the data associated with the secret from
- The members of SecretCommonProperties.
- Object SecretKeyringProperties (Since: 5.1)
- Availability: CONFIG_SECRET_KEYRING
Properties for secret_keyring objects.
- serial (int) -- serial number that identifies a key to get from the kernel
- The members of SecretCommonProperties.
- Object TlsCredsProperties (Since: 2.5)
- Properties for objects of classes derived from tls-creds.
- verify-peer (boolean, optional) -- if true the peer credentials will be verified once the handshake is completed. This is a no-op for anonymous credentials. (default: true)
- dir (string, optional) -- the path of the directory that contains the credential files
- endpoint (QCryptoTLSCredsEndpoint, optional) -- whether the QEMU network backend that uses the credentials will be acting as a client or as a server (default: client)
- priority (string, optional) -- a gnutls priority string as described at <https://gnutls.org/manual/html_node/Priority-Strings.html>
- Object TlsCredsAnonProperties (Since: 2.5)
- Properties for tls-creds-anon objects.
- Object TlsCredsPskProperties (Since: 3.0)
- Properties for tls-creds-psk objects.
- username (string, optional) -- the username which will be sent to the server. For clients only. If absent, "qemu" is sent and the property will read back as an empty string.
- The members of TlsCredsProperties.
- Object TlsCredsX509Properties (Since: 2.5)
- Properties for tls-creds-x509 objects.
- sanity-check (boolean, optional) -- if true, perform some sanity checks before using the credentials (default: true)
- passwordid (string, optional) -- For the server-key.pem and client-key.pem files which contain sensitive private keys, it is possible to use an encrypted version by providing the passwordid parameter. This provides the ID of a previously created secret object containing the password for decryption.
- The members of TlsCredsProperties.
- Enum QCryptoAkCipherAlgo (Since: 7.1)
- The supported algorithms for asymmetric encryption ciphers
- Enum QCryptoAkCipherKeyType (Since: 7.1)
- The type of asymmetric keys.
- Enum QCryptoRSAPaddingAlgo (Since: 7.1)
- The padding algorithm for RSA.
- Object QCryptoAkCipherOptionsRSA (Since: 7.1)
- Specific parameters for RSA algorithm.
- hash-alg (QCryptoHashAlgo) -- QCryptoHashAlgo
- padding-alg (QCryptoRSAPaddingAlgo) -- QCryptoRSAPaddingAlgo
- Object QCryptoAkCipherOptions (Since: 7.1)
- The options that are available for all asymmetric key algorithms when creating a new QCryptoAkCipher.
- alg (QCryptoAkCipherAlgo) -- encryption cipher algorithm
- When alg is rsa: The members of QCryptoAkCipherOptionsRSA.
BACKGROUND JOBS
- Enum JobType (Since: 1.7)
- Type of a background job.
- commit -- block commit job type, see block-commit
- stream -- block stream job type, see block-stream
- mirror -- drive mirror job type, see drive-mirror
- backup -- drive backup job type, see drive-backup
- create -- image creation job type, see blockdev-create (since 3.0)
- amend -- image options amend job type, see x-blockdev-amend (since 5.1)
- snapshot-load -- snapshot load job type, see snapshot-load <#command-QMP-migration.snapshot-load> (since 6.0)
- snapshot-save -- snapshot save job type, see snapshot-save <#command-QMP-migration.snapshot-save> (since 6.0)
- snapshot-delete -- snapshot delete job type, see snapshot-delete <#command-QMP-migration.snapshot-delete> (since 6.0)
- Enum JobStatus (Since: 2.12)
- Indicates the present state of a given job in its lifetime.
- undefined -- Erroneous, default state. Should not ever be visible.
- created -- The job has been created, but not yet started.
- running -- The job is currently running.
- paused -- The job is running, but paused. The pause may be requested by either the QMP user or by internal processes.
- ready -- The job is running, but is ready for the user to signal completion. This is used for long-running jobs like mirror that are designed to run indefinitely.
- standby -- The job is ready, but paused. This is nearly identical to paused. The job may return to ready or otherwise be canceled.
- waiting -- The job is waiting for other jobs in the transaction to converge to the waiting state. This status will likely not be visible for the last job in a transaction.
- pending -- The job has finished its work, but has finalization steps that it needs to make prior to completing. These changes will require manual intervention via job-finalize if auto-finalize was set to false. These pending changes may still fail.
- aborting -- The job is in the process of being aborted, and will finish with an error. The job will afterwards report that it is concluded. This status may not be visible to the management process.
- concluded -- The job has finished all work. If auto-dismiss was set to false, the job will remain in this state until it is dismissed via job-dismiss.
- null -- The job is in the process of being dismantled. This state should not ever be visible externally.
- Enum JobVerb (Since: 2.12)
- Represents command verbs that can be applied to a job.
- cancel -- see job-cancel
- pause -- see job-pause
- resume -- see job-resume
- set-speed -- see block-job-set-speed
- complete -- see job-complete
- dismiss -- see job-dismiss
- finalize -- see job-finalize
- change -- see block-job-change (since 8.2)
- Event JOB_STATUS_CHANGE (Since: 3.0)
- Emitted when a job transitions to a different status.
- Command job-pause (Since: 3.0)
- Pause an active job.
This command returns immediately after marking the active job for pausing. Pausing an already paused job is an error.
The job will pause as soon as possible, which means transitioning into the PAUSED state if it was RUNNING, or into STANDBY if it was READY. The corresponding JOB_STATUS_CHANGE event will be emitted.
Cancelling a paused job automatically resumes it.
- Command job-resume (Since: 3.0)
- Resume a paused job.
This command returns immediately after resuming a paused job. Resuming an already running job is an error.
This command also clears the error status for block-jobs (stream, commit, mirror, backup).
- Command job-cancel (Since: 3.0)
- Instruct an active background job to cancel at the next opportunity. This
command returns immediately after marking the active job for cancellation.
The job will cancel as soon as possible and then emit a JOB_STATUS_CHANGE event. Usually, the status will change to ABORTING, but it is possible that a job successfully completes (e.g. because it was almost done and there was no opportunity to cancel earlier than completing the job) and transitions to PENDING instead.
- Command job-complete (Since: 3.0)
- Manually trigger completion of an active job in the READY or STANDBY
state. Completing the job in any other state is an error.
This is supported only for drive mirroring, where it also switches the device to write to the target path only. Note that drive mirroring includes drive-mirror, blockdev-mirror and block-commit job (only in case of "active commit", when the node being commited is used by the guest). The ability to complete is signaled with a BLOCK_JOB_READY event.
This command completes an active background block operation synchronously. The ordering of this command's return with the BLOCK_JOB_COMPLETED event is not defined. Note that if an I/O error occurs during the processing of this command: 1) the command itself will fail; 2) the error will be processed according to the rerror/werror arguments that were specified when starting the operation.
- Command job-dismiss (Since: 3.0)
- Deletes a job that is in the CONCLUDED state. This command only needs to
be run explicitly for jobs that don't have automatic dismiss enabled. In
turn, automatic dismiss may be enabled only for jobs that have
auto-dismiss option, which are drive-backup,
blockdev-backup, drive-mirror, blockdev-mirror,
block-commit and block-stream. auto-dismiss is
enabled by default for these jobs.
This command will refuse to operate on any job that has not yet reached its terminal state, CONCLUDED. For jobs that make use of the JOB_READY event, job-cancel or job-complete will still need to be used as appropriate.
- Command job-finalize (Since: 3.0)
- Instructs all jobs in a transaction (or a single job if it is not part of
any transaction) to finalize any graph changes and do any necessary
cleanup. This command requires that all involved jobs are in the PENDING
state.
For jobs in a transaction, instructing one job to finalize will force ALL jobs in the transaction to finalize, so it is only necessary to instruct a single member job to finalize.
The command is applicable only to jobs which have auto-finalize option and only when this option is set to false.
- id (string) -- The identifier of any job in the transaction, or of a job that is not part of any transaction.
- Object JobInfo (Since: 3.0)
- Information about a job.
- id (string) -- The job identifier
- type (JobType) -- The kind of job that is being performed
- status (JobStatus) -- Current job state/status
- current-progress (int) -- Progress made until now. The unit is arbitrary and the value can only meaningfully be used for the ratio of current-progress to total-progress. The value is monotonically increasing.
- total-progress (int) -- Estimated current-progress value at the completion of the job. This value can arbitrarily change while the job is running, in both directions.
- error (string, optional) --
If this field is present, the job failed; if it is still missing in the CONCLUDED state, this indicates successful completion.
The value is a human-readable error message to describe the reason for the job failure. It should not be parsed by applications.
- Command query-jobs (Since: 3.0)
- Return information about jobs.
- Return
- [JobInfo] -- a list with info for each active job
BLOCK DEVICES
Block core (VM unrelated)
- id (string) -- unique snapshot id
- name (string) -- user chosen name
- vm-state-size (int) -- size of the VM state
- date-sec (int) -- UTC date of the snapshot in seconds
- date-nsec (int) -- fractional part in nano seconds to be used with date-sec
- vm-clock-sec (int) -- VM clock relative to boot in seconds
- vm-clock-nsec (int) -- fractional part in nano seconds to be used with vm-clock-sec
- icount (int, optional) -- Current instruction count. Appears when execution record/replay is enabled. Used for "time-traveling" to match the moment in the recorded execution with the snapshots. This counter may be obtained through query-replay <#command-QMP-replay.query-replay> command (since 5.2)
- The members of ImageInfoSpecificQCow2EncryptionBase.
- When format is luks: The members of QCryptoBlockInfoLUKS.
- compat (string) -- compatibility level
- data-file (string, optional) -- the filename of the external data file that is stored in the image and used as a default for opening the image (since: 4.0)
- data-file-raw (boolean, optional) -- True if the external data file must stay valid as a standalone (read-only) raw image without looking at qcow2 metadata (since: 4.0)
- extended-l2 (boolean, optional) -- true if the image has extended L2 entries; only valid for compat >= 1.1 (since 5.2)
- lazy-refcounts (boolean, optional) -- on or off; only valid for compat >= 1.1
- corrupt (boolean, optional) -- true if the image has been marked corrupt; only valid for compat >= 1.1 (since 2.2)
- refcount-bits (int) -- width of a refcount entry in bits (since 2.3)
- encrypt (ImageInfoSpecificQCow2Encryption, optional) -- details about encryption parameters; only set if image is encrypted (since 2.10)
- bitmaps ([Qcow2BitmapInfo], optional) -- A list of qcow2 bitmap details (since 4.0)
- compression-type (Qcow2CompressionType) -- the image cluster compression method (since 5.1)
- create-type (string) -- The create type of VMDK image
- cid (int) -- Content id of image
- parent-cid (int) -- Parent VMDK image's cid
- extents ([VmdkExtentInfo]) -- List of extent files
- Object VmdkExtentInfo (Since: 8.0)
- Information about a VMDK extent file
- filename (string) -- Name of the extent file
- format (string) -- Extent type (e.g. FLAT or SPARSE)
- virtual-size (int) -- Number of bytes covered by this extent
- cluster-size (int, optional) -- Cluster size in bytes (for non-flat extents)
- compressed (boolean, optional) -- Whether this extent contains compressed data
- encryption-format (RbdImageEncryptionFormat, optional) -- Image encryption format. If encryption is enabled for the image (see encrypted in BlockNodeInfo), this is the actual format in which the image is accessed. If encryption is not enabled, this is the result of probing when the image was opened, to give a suggestion which encryption format could be enabled. Note that probing results can be changed by the guest by writing a (possibly partial) encryption format header to the image, so don't treat this information as trusted if the guest is not trusted.
- luks -- Since 2.7
- rbd -- Since 6.1
- file -- Since 8.0
- qcow2 -- Not documented
- vmdk -- Not documented
- Object ImageInfoSpecific (Since: 1.7)
- A discriminated record of image format specific information structures.
- type (ImageInfoSpecificKind) -- block driver name
- When type is qcow2: The members of ImageInfoSpecificQCow2Wrapper.
- When type is vmdk: The members of ImageInfoSpecificVmdkWrapper.
- When type is luks: The members of ImageInfoSpecificLUKSWrapper.
- When type is rbd: The members of ImageInfoSpecificRbdWrapper.
- When type is file: The members of ImageInfoSpecificFileWrapper.
- request-alignment (int) -- Alignment requirement, in bytes, for offset/length of I/O requests.
- max-discard (int, optional) -- Maximum number of bytes that can be discarded at once. If not present, there is no specific maximum.
- discard-alignment (int, optional) -- Optimal alignment for discard requests in bytes. Note that this doesn't have to be a power of two. If not present, discards don't have a alignment requirement different from request-alignment.
- max-write-zeroes (int, optional) -- Maximum number of bytes that can be zeroed out at once. If not present, there is no specific maximum.
- write-zeroes-alignment (int, optional) -- Optimal alignment for write zeroes requests in bytes. Note that this doesn't have to be a power of two. If not present, write_zeroes doesn't have a alignment requirement different from request-alignment.
- opt-transfer (int, optional) -- Optimal transfer length in bytes. If not present, there is no preferred size.
- max-transfer (int, optional) -- Maximal transfer length in bytes. If not present, there is no specific maximum.
- max-hw-transfer (int, optional) -- Maximal hardware transfer length in bytes. Applies whenever transfers to the device bypass the kernel I/O scheduler, for example with SG_IO. If not present, there is no specific maximum.
- max-iov (int) -- Maximum number of scatter/gather elements
- max-hw-iov (int, optional) -- Maximum number of scatter/gather elements allowed by the hardware. Applies whenever transfers to the device bypass the kernel I/O scheduler, for example with SG_IO. If not present, the hardware limits is unknown and max-iov is always used.
- min-mem-alignment (int) -- Minimal required memory alignment in bytes for zero-copy I/O to succeed. For unaligned requests, a bounce buffer will be used.
- opt-mem-alignment (int) -- Optimal memory alignment in bytes. This is the alignment used for any buffer allocations QEMU performs internally.
- Object BlockNodeInfo (Since: 8.0)
- Information about a QEMU image file
- filename (string) -- name of the image file
- format (string) -- format of the image file
- virtual-size (int) -- maximum capacity in bytes of the image
- actual-size (int, optional) -- actual size on disk in bytes of the image
- dirty-flag (boolean, optional) -- true if image is not cleanly closed
- cluster-size (int, optional) -- size of a cluster in bytes
- encrypted (boolean, optional) -- true if the image is encrypted
- compressed (boolean, optional) -- true if the image is compressed (Since 1.7)
- backing-filename (string, optional) -- name of the backing file
- full-backing-filename (string, optional) -- full path of the backing file
- backing-filename-format (string, optional) -- the format of the backing file
- snapshots ([SnapshotInfo], optional) -- list of VM snapshots
- limits (BlockLimitsInfo, optional) -- block limits that are used for I/O on the node (Since 10.2)
- format-specific (ImageInfoSpecific, optional) -- structure supplying additional format-specific information (since 1.7)
- Object ImageInfo (Since: 1.3)
- Information about a QEMU image file, and potentially its backing image
- backing-image (ImageInfo, optional) -- info of the backing image
- The members of BlockNodeInfo.
- Object BlockChildInfo (Since: 8.0)
- Information about all nodes in the block graph starting at some node, annotated with information about that node in relation to its parent.
- name (string) -- Child name of the root node in the BlockGraphInfo struct, in its role as the child of some undescribed parent node
- info (BlockGraphInfo) -- Block graph information starting at this node
- Object BlockGraphInfo (Since: 8.0)
- Information about all nodes in a block (sub)graph in the form of BlockNodeInfo data. The base BlockNodeInfo struct contains the information for the (sub)graph's root node.
- children ([BlockChildInfo]) -- Array of links to this node's child nodes' information
- The members of BlockNodeInfo.
- Object ImageCheck (Since: 1.4)
- Information about a QEMU image file check
- filename (string) -- name of the image file checked
- format (string) -- format of the image file checked
- check-errors (int) -- number of unexpected errors occurred during check
- image-end-offset (int, optional) -- offset (in bytes) where the image ends, this field is present if the driver for the image format supports it
- corruptions (int, optional) -- number of corruptions found during the check if any
- leaks (int, optional) -- number of leaks found during the check if any
- corruptions-fixed (int, optional) -- number of corruptions fixed during the check if any
- leaks-fixed (int, optional) -- number of leaks fixed during the check if any
- total-clusters (int, optional) -- total number of clusters, this field is present if the driver for the image format supports it
- allocated-clusters (int, optional) -- total number of allocated clusters, this field is present if the driver for the image format supports it
- fragmented-clusters (int, optional) -- total number of fragmented clusters, this field is present if the driver for the image format supports it
- compressed-clusters (int, optional) -- total number of compressed clusters, this field is present if the driver for the image format supports it
- Object MapEntry (Since: 2.6)
- Mapping information from a virtual block range to a host file range
- start (int) -- virtual (guest) offset of the first byte described by this entry
- length (int) -- the number of bytes of the mapped virtual range
- data (boolean) -- reading the image will actually read data from a file (in particular, if offset is present this means that the sectors are not simply preallocated, but contain actual data in raw format)
- zero (boolean) -- whether the virtual blocks read as zeroes
- compressed (boolean) -- true if the data is stored compressed (since 8.2)
- depth (int) -- number of layers (0 = top image, 1 = top image's backing file, ..., n - 1 = bottom image (where n is the number of images in the chain)) before reaching one for which the range is allocated
- present (boolean) -- true if this layer provides the data, false if adding a backing layer could impact this region (since 6.1)
- offset (int, optional) -- if present, the image file stores the data for this range in raw format at the given (host) offset
- filename (string, optional) -- filename that is referred to by offset
- Object BlockdevCacheInfo (Since: 2.3)
- Cache mode information for a block device
- writeback (boolean) -- true if writeback mode is enabled
- direct (boolean) -- true if the host page cache is bypassed (O_DIRECT)
- no-flush (boolean) -- true if flush requests are ignored for the device
- child (string) -- The name of the child, for example 'file' or 'backing'.
- node-name (string) -- The name of the child's block driver node.
- Object BlockDeviceInfo (Since: 0.14)
- Information about the backing device for a block device.
- file (string) -- the filename of the backing device
- node-name (string) -- the name of the block driver node (Since 2.0)
- ro (boolean) -- true if the backing device was open read-only
- drv (string) -- the name of the block format used to open the backing device. As of 0.14 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg', 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', 'http', 'https', 'luks', 'nbd', 'parallels', 'qcow', 'qcow2', 'raw', 'vdi', 'vmdk', 'vpc', 'vvfat' 2.2: 'archipelago' added, 'cow' dropped 2.3: 'host_floppy' deprecated 2.5: 'host_floppy' dropped 2.6: 'luks' added 2.8: 'replication' added, 'tftp' dropped 2.9: 'archipelago' dropped
- backing_file (string, optional) -- the name of the backing file (for copy-on-write)
- backing_file_depth (int) -- number of files in the backing file chain (since: 1.2)
- children ([BlockdevChild]) -- Information about child block nodes. (since: 10.1)
- active (boolean) -- true if the backend is active; typical cases for inactive backends are on the migration source instance after migration completes and on the destination before it completes. (since: 10.0)
- encrypted (boolean) -- true if the backing device is encrypted
- detect_zeroes (BlockdevDetectZeroesOptions) -- detect and optimize zero writes (Since 2.1)
- bps (int) -- total throughput limit in bytes per second is specified
- bps_rd (int) -- read throughput limit in bytes per second is specified
- bps_wr (int) -- write throughput limit in bytes per second is specified
- iops (int) -- total I/O operations per second is specified
- iops_rd (int) -- read I/O operations per second is specified
- iops_wr (int) -- write I/O operations per second is specified
- image (ImageInfo) -- the info of image used (since: 1.6)
- bps_max (int, optional) -- total throughput limit during bursts, in bytes (Since 1.7)
- bps_rd_max (int, optional) -- read throughput limit during bursts, in bytes (Since 1.7)
- bps_wr_max (int, optional) -- write throughput limit during bursts, in bytes (Since 1.7)
- iops_max (int, optional) -- total I/O operations per second during bursts, in bytes (Since 1.7)
- iops_rd_max (int, optional) -- read I/O operations per second during bursts, in bytes (Since 1.7)
- iops_wr_max (int, optional) -- write I/O operations per second during bursts, in bytes (Since 1.7)
- bps_max_length (int, optional) -- maximum length of the bps_max burst period, in seconds. (Since 2.6)
- bps_rd_max_length (int, optional) -- maximum length of the bps_rd_max burst period, in seconds. (Since 2.6)
- bps_wr_max_length (int, optional) -- maximum length of the bps_wr_max burst period, in seconds. (Since 2.6)
- iops_max_length (int, optional) -- maximum length of the iops burst period, in seconds. (Since 2.6)
- iops_rd_max_length (int, optional) -- maximum length of the iops_rd_max burst period, in seconds. (Since 2.6)
- iops_wr_max_length (int, optional) -- maximum length of the iops_wr_max burst period, in seconds. (Since 2.6)
- iops_size (int, optional) -- an I/O size in bytes (Since 1.7)
- group (string, optional) -- throttle group name (Since 2.4)
- cache (BlockdevCacheInfo) -- the cache mode used for the block device (since: 2.3)
- write_threshold (int) -- configured write threshold for the device. 0 if disabled. (Since 2.3)
- dirty-bitmaps ([BlockDirtyInfo], optional) -- dirty bitmaps information (only present if node has one or more dirty bitmaps) (Since 4.2)
- Enum BlockDeviceIoStatus (Since: 1.0)
- An enumeration of block device I/O status.
- ok -- The last I/O operation has succeeded
- failed -- The last I/O operation has failed
- nospace -- The last I/O operation has failed due to a no-space condition
- Object BlockDirtyInfo (Since: 1.3)
- Block dirty bitmap information.
- name (string, optional) -- the name of the dirty bitmap (Since 2.4)
- count (int) -- number of dirty bytes according to the dirty bitmap
- granularity (int) -- granularity of the dirty bitmap in bytes (since 1.4)
- recording (boolean) -- true if the bitmap is recording new writes from the guest. (since 4.0)
- busy (boolean) -- true if the bitmap is in-use by some operation (NBD or jobs) and cannot be modified via QMP or used by another operation. (since 4.0)
- persistent (boolean) -- true if the bitmap was stored on disk, is scheduled to be stored on disk, or both. (since 4.0)
- inconsistent (boolean, optional) -- true if this is a persistent bitmap that was improperly stored. Implies persistent to be true; recording and busy to be false. This bitmap cannot be used. To remove it, use block-dirty-bitmap-remove. (Since 4.0)
- Enum Qcow2BitmapInfoFlags (Since: 4.0)
- An enumeration of flags that a bitmap can report to the user.
- in-use -- This flag is set by any process actively modifying the qcow2 file, and cleared when the updated bitmap is flushed to the qcow2 image. The presence of this flag in an offline image means that the bitmap was not saved correctly after its last usage, and may contain inconsistent data.
- auto -- The bitmap must reflect all changes of the virtual disk by any application that would write to this qcow2 file.
- Object Qcow2BitmapInfo (Since: 4.0)
- Qcow2 bitmap information.
- name (string) -- the name of the bitmap
- granularity (int) -- granularity of the bitmap in bytes
- flags ([Qcow2BitmapInfoFlags]) -- flags of the bitmap
- Object BlockLatencyHistogramInfo (Since: 4.0)
- Block latency histogram.
- boundaries ([int]) -- list of interval boundary values in nanoseconds, all greater than zero and in ascending order. For example, the list [10, 50, 100] produces the following histogram intervals: [0, 10), [10, 50), [50, 100), [100, +inf).
- bins ([int]) --
list of io request counts corresponding to histogram intervals, one more element than boundaries has. For the example above, bins may be something like [3, 1, 5, 2], and corresponding histogram looks like:
5| *
4| *
3| * *
2| * * *
1| * * * *
+------------------
10 50 100
- Object BlockInfo (Since: 0.14)
- Block device information. This structure describes a virtual device and the backing device associated with it.
- device (string) -- The device name associated with the virtual device.
- qdev (string, optional) -- The qdev ID, or if no ID is assigned, the QOM path of the block device. (since 2.10)
- type (string) -- This field is returned only for compatibility reasons, it should not be used (always returns 'unknown')
- removable (boolean) -- True if the device supports removable media.
- locked (boolean) -- True if the guest has locked this device from having its media removed
- tray_open (boolean, optional) -- True if the device's tray is open (only present if it has a tray)
- io-status (BlockDeviceIoStatus, optional) -- BlockDeviceIoStatus. Only present if the device supports it and the VM is configured to stop on errors (supported device models: virtio-blk, IDE, SCSI except scsi-generic)
- inserted (BlockDeviceInfo, optional) -- BlockDeviceInfo describing the device if media is present
- Object BlockMeasureInfo (Since: 2.10)
- Image file size calculation information. This structure describes the size
requirements for creating a new image file.
The size requirements depend on the new image file format. File size always equals virtual disk size for the 'raw' format, even for sparse POSIX files. Compact formats such as 'qcow2' represent unallocated and zero regions efficiently so file size may be smaller than virtual disk size.
The values are upper bounds that are guaranteed to fit the new image file. Subsequent modification, such as internal snapshot or further bitmap creation, may require additional space and is not covered here.
- required (int) -- Size required for a new image file, in bytes, when copying just allocated guest-visible contents.
- fully-allocated (int) -- Image file size, in bytes, once data has been written to all sectors, when copying just guest-visible contents.
- bitmaps (int, optional) -- Additional size required if all the top-level bitmap metadata in the source image were to be copied to the destination, present only when source and destination both support persistent bitmaps. (since 5.1)
- Command query-block (Since: 0.14)
- Get a list of BlockInfo for all virtual block devices.
- Return
- [BlockInfo] -- a list describing each virtual block device. Filter nodes that were created implicitly are skipped over.
-> { "execute": "query-block" }
<- {
"return":[
{
"io-status": "ok",
"device":"ide0-hd0",
"locked":false,
"removable":false,
"inserted":{
"ro":false,
"drv":"qcow2",
"encrypted":false,
"file":"disks/test.qcow2",
"backing_file_depth":1,
"bps":1000000,
"bps_rd":0,
"bps_wr":0,
"iops":1000000,
"iops_rd":0,
"iops_wr":0,
"bps_max": 8000000,
"bps_rd_max": 0,
"bps_wr_max": 0,
"iops_max": 0,
"iops_rd_max": 0,
"iops_wr_max": 0,
"iops_size": 0,
"detect_zeroes": "on",
"write_threshold": 0,
"image":{
"filename":"disks/test.qcow2",
"format":"qcow2",
"virtual-size":2048000,
"backing_file":"base.qcow2",
"full-backing-filename":"disks/base.qcow2",
"backing-filename-format":"qcow2",
"snapshots":[
{
"id": "1",
"name": "snapshot1",
"vm-state-size": 0,
"date-sec": 10000200,
"date-nsec": 12,
"vm-clock-sec": 206,
"vm-clock-nsec": 30
}
],
"backing-image":{
"filename":"disks/base.qcow2",
"format":"qcow2",
"virtual-size":2048000
}
}
},
"qdev": "ide_disk",
"type":"unknown"
},
{
"io-status": "ok",
"device":"ide1-cd0",
"locked":false,
"removable":true,
"qdev": "/machine/unattached/device[23]",
"tray_open": false,
"type":"unknown"
},
{
"device":"floppy0",
"locked":false,
"removable":true,
"qdev": "/machine/unattached/device[20]",
"type":"unknown"
},
{
"device":"sd0",
"locked":false,
"removable":true,
"type":"unknown"
}
]
}
- Object BlockDeviceTimedStats (Since: 2.5)
- Statistics of a block device during a given interval of time.
- interval_length (int) -- Interval used for calculating the statistics, in seconds.
- min_rd_latency_ns (int) -- Minimum latency of read operations in the defined interval, in nanoseconds.
- min_wr_latency_ns (int) -- Minimum latency of write operations in the defined interval, in nanoseconds.
- min_zone_append_latency_ns (int) -- Minimum latency of zone append operations in the defined interval, in nanoseconds (since 8.1)
- min_flush_latency_ns (int) -- Minimum latency of flush operations in the defined interval, in nanoseconds.
- max_rd_latency_ns (int) -- Maximum latency of read operations in the defined interval, in nanoseconds.
- max_wr_latency_ns (int) -- Maximum latency of write operations in the defined interval, in nanoseconds.
- max_zone_append_latency_ns (int) -- Maximum latency of zone append operations in the defined interval, in nanoseconds (since 8.1)
- max_flush_latency_ns (int) -- Maximum latency of flush operations in the defined interval, in nanoseconds.
- avg_rd_latency_ns (int) -- Average latency of read operations in the defined interval, in nanoseconds.
- avg_wr_latency_ns (int) -- Average latency of write operations in the defined interval, in nanoseconds.
- avg_zone_append_latency_ns (int) -- Average latency of zone append operations in the defined interval, in nanoseconds (since 8.1)
- avg_flush_latency_ns (int) -- Average latency of flush operations in the defined interval, in nanoseconds.
- avg_rd_queue_depth (number) -- Average number of pending read operations in the defined interval.
- avg_wr_queue_depth (number) -- Average number of pending write operations in the defined interval.
- avg_zone_append_queue_depth (number) -- Average number of pending zone append operations in the defined interval (since 8.1).
- Object BlockDeviceStats (Since: 0.14)
- Statistics of a virtual block device or a block backing device.
- rd_bytes (int) -- The number of bytes read by the device.
- wr_bytes (int) -- The number of bytes written by the device.
- zone_append_bytes (int) -- The number of bytes appended by the zoned devices (since 8.1)
- unmap_bytes (int) -- The number of bytes unmapped by the device (Since 4.2)
- rd_operations (int) -- The number of read operations performed by the device.
- wr_operations (int) -- The number of write operations performed by the device.
- zone_append_operations (int) -- The number of zone append operations performed by the zoned devices (since 8.1)
- flush_operations (int) -- The number of cache flush operations performed by the device (since 0.15)
- unmap_operations (int) -- The number of unmap operations performed by the device (Since 4.2)
- rd_total_time_ns (int) -- Total time spent on reads in nanoseconds (since 0.15)
- wr_total_time_ns (int) -- Total time spent on writes in nanoseconds (since 0.15)
- zone_append_total_time_ns (int) -- Total time spent on zone append writes in nanoseconds (since 8.1)
- flush_total_time_ns (int) -- Total time spent on cache flushes in nanoseconds (since 0.15).
- unmap_total_time_ns (int) -- Total time spent on unmap operations in nanoseconds (Since 4.2)
- wr_highest_offset (int) -- The offset after the greatest byte written to the device. The intended use of this information is for growable sparse files (like qcow2) that are used on top of a physical device.
- rd_merged (int) -- Number of read requests that have been merged into another request (Since 2.3).
- wr_merged (int) -- Number of write requests that have been merged into another request (Since 2.3).
- zone_append_merged (int) -- Number of zone append requests that have been merged into another request (since 8.1)
- unmap_merged (int) -- Number of unmap requests that have been merged into another request (Since 4.2)
- idle_time_ns (int, optional) -- Time since the last I/O operation, in nanoseconds. If the field is absent it means that there haven't been any operations yet (Since 2.5).
- failed_rd_operations (int) -- The number of failed read operations performed by the device (Since 2.5)
- failed_wr_operations (int) -- The number of failed write operations performed by the device (Since 2.5)
- failed_zone_append_operations (int) -- The number of failed zone append write operations performed by the zoned devices (since 8.1)
- failed_flush_operations (int) -- The number of failed flush operations performed by the device (Since 2.5)
- failed_unmap_operations (int) -- The number of failed unmap operations performed by the device (Since 4.2)
- invalid_rd_operations (int) -- The number of invalid read operations performed by the device (Since 2.5)
- invalid_wr_operations (int) -- The number of invalid write operations performed by the device (Since 2.5)
- invalid_zone_append_operations (int) -- The number of invalid zone append operations performed by the zoned device (since 8.1)
- invalid_flush_operations (int) -- The number of invalid flush operations performed by the device (Since 2.5)
- invalid_unmap_operations (int) -- The number of invalid unmap operations performed by the device (Since 4.2)
- account_invalid (boolean) -- Whether invalid operations are included in the last access statistics (Since 2.5)
- account_failed (boolean) -- Whether failed operations are included in the latency and last access statistics (Since 2.5)
- timed_stats ([BlockDeviceTimedStats]) -- Statistics specific to the set of previously defined intervals of time (Since 2.5)
- rd_latency_histogram (BlockLatencyHistogramInfo, optional) -- BlockLatencyHistogramInfo. (Since 4.0)
- wr_latency_histogram (BlockLatencyHistogramInfo, optional) -- BlockLatencyHistogramInfo. (Since 4.0)
- zone_append_latency_histogram (BlockLatencyHistogramInfo, optional) -- BlockLatencyHistogramInfo. (since 8.1)
- flush_latency_histogram (BlockLatencyHistogramInfo, optional) -- BlockLatencyHistogramInfo. (Since 4.0)
- Object BlockStatsSpecificFile (Since: 4.2)
- File driver statistics
- discard-nb-ok (int) -- The number of successful discard operations performed by the driver.
- discard-nb-failed (int) -- The number of failed discard operations performed by the driver.
- discard-bytes-ok (int) -- The number of bytes discarded by the driver.
- Object BlockStatsSpecificNvme (Since: 5.2)
- NVMe driver statistics
- completion-errors (int) -- The number of completion errors.
- aligned-accesses (int) -- The number of aligned accesses performed by the driver.
- unaligned-accesses (int) -- The number of unaligned accesses performed by the driver.
- Object BlockStatsSpecific (Since: 4.2)
- Block driver specific statistics
- driver (BlockdevDriver) -- block driver name
- When driver is file: The members of BlockStatsSpecificFile.
- When driver is host_device: The members of BlockStatsSpecificFile.
- When driver is nvme: The members of BlockStatsSpecificNvme.
- Object BlockStats (Since: 0.14)
- Statistics of a virtual block device or a block backing device.
- device (string, optional) -- If the stats are for a virtual block device, the name corresponding to the virtual block device.
- node-name (string, optional) -- The node name of the device. (Since 2.3)
- qdev (string, optional) -- The qdev ID, or if no ID is assigned, the QOM path of the block device. (since 3.0)
- stats (BlockDeviceStats) -- A BlockDeviceStats for the device.
- driver-specific (BlockStatsSpecific, optional) -- Optional driver-specific stats. (Since 4.2)
- parent (BlockStats, optional) -- This describes the file block device if it has one. Contains recursively the statistics of the underlying protocol (e.g. the host file for a qcow2 image). If there is no underlying protocol, this field is omitted
- backing (BlockStats, optional) -- This describes the backing block device if it has one. (Since 2.0)
- Command query-blockstats (Since: 0.14)
- Query the BlockStats for all virtual block devices.
- query-nodes (boolean, optional) -- If true, the command will query all the block nodes that have a node name, in a list which will include "parent" information, but not "backing". If false or omitted, the behavior is as before - query all the device backends, recursively including their "parent" and "backing". Filter nodes that were created implicitly are skipped over in this mode. (Since 2.3)
- Return
- [BlockStats] -- A list of statistics for each virtual block device.
-> { "execute": "query-blockstats" }
<- {
"return":[
{
"device":"ide0-hd0",
"parent":{
"stats":{
"wr_highest_offset":3686448128,
"wr_bytes":9786368,
"wr_operations":751,
"rd_bytes":122567168,
"rd_operations":36772
"wr_total_times_ns":313253456
"rd_total_times_ns":3465673657
"flush_total_times_ns":49653
"flush_operations":61,
"rd_merged":0,
"wr_merged":0,
"idle_time_ns":2953431879,
"account_invalid":true,
"account_failed":false
}
},
"stats":{
"wr_highest_offset":2821110784,
"wr_bytes":9786368,
"wr_operations":692,
"rd_bytes":122739200,
"rd_operations":36604
"flush_operations":51,
"wr_total_times_ns":313253456
"rd_total_times_ns":3465673657
"flush_total_times_ns":49653,
"rd_merged":0,
"wr_merged":0,
"idle_time_ns":2953431879,
"account_invalid":true,
"account_failed":false
},
"qdev": "/machine/unattached/device[23]"
},
{
"device":"ide1-cd0",
"stats":{
"wr_highest_offset":0,
"wr_bytes":0,
"wr_operations":0,
"rd_bytes":0,
"rd_operations":0
"flush_operations":0,
"wr_total_times_ns":0
"rd_total_times_ns":0
"flush_total_times_ns":0,
"rd_merged":0,
"wr_merged":0,
"account_invalid":false,
"account_failed":false
},
"qdev": "/machine/unattached/device[24]"
},
{
"device":"floppy0",
"stats":{
"wr_highest_offset":0,
"wr_bytes":0,
"wr_operations":0,
"rd_bytes":0,
"rd_operations":0
"flush_operations":0,
"wr_total_times_ns":0
"rd_total_times_ns":0
"flush_total_times_ns":0,
"rd_merged":0,
"wr_merged":0,
"account_invalid":false,
"account_failed":false
},
"qdev": "/machine/unattached/device[16]"
},
{
"device":"sd0",
"stats":{
"wr_highest_offset":0,
"wr_bytes":0,
"wr_operations":0,
"rd_bytes":0,
"rd_operations":0
"flush_operations":0,
"wr_total_times_ns":0
"rd_total_times_ns":0
"flush_total_times_ns":0,
"rd_merged":0,
"wr_merged":0,
"account_invalid":false,
"account_failed":false
}
}
]
}
- Enum BlockdevOnError (Since: 1.3)
- An enumeration of possible behaviors for errors on I/O operations. The exact meaning depends on whether the I/O was initiated by a guest or by a block job
- report -- for guest operations, report the error to the guest; for jobs, cancel the job
- ignore -- ignore the error, only report a QMP event (BLOCK_IO_ERROR or BLOCK_JOB_ERROR). The backup, mirror and commit block jobs retry the failing request later and may still complete successfully. The stream block job continues to stream and will complete with an error.
- enospc -- same as stop on ENOSPC, same as report otherwise.
- stop -- for guest operations, stop the virtual machine; for jobs, pause the job
- auto -- inherit the error handling policy of the backend (since: 2.7)
- Enum MirrorSyncMode (Since: 1.3)
- An enumeration of possible behaviors for the initial synchronization phase of storage mirroring.
- top -- copies data in the topmost image to the destination
- full -- copies data from all images to the destination
- none -- only copy data written from now on
- incremental -- only copy data described by the dirty bitmap. (since: 2.4)
- bitmap -- only copy data described by the dirty bitmap. Behavior on completion is determined by the BitmapSyncMode. (since: 4.2)
- Enum BitmapSyncMode (Since: 4.2)
- An enumeration of possible behaviors for the synchronization of a bitmap when used for data copy operations.
- on-success -- The bitmap is only synced when the operation is successful. This is the behavior always used for incremental backups.
- never -- The bitmap is never synchronized with the operation, and is treated solely as a read-only manifest of blocks to copy.
- always -- The bitmap is always synchronized with the operation, regardless of whether or not the operation was successful.
- Enum MirrorCopyMode (Since: 3.0)
- An enumeration whose values tell the mirror block job when to trigger writes to the target.
- background -- copy data in background only.
- write-blocking -- when data is written to the source, write it (synchronously) to the target as well. In addition, data is copied in background just like in background mode.
- Object BlockJobInfoMirror (Since: 8.2)
- Information specific to mirror block jobs.
- actively-synced (boolean) -- Whether the source is actively synced to the target, i.e. same data and new writes are done synchronously to both.
- Object BlockJobInfo (Since: 1.1)
- Information about a long-running block device operation.
- type (JobType) -- the job type ('stream' for image streaming)
- device (string) -- The job identifier. Originally the device name but other values are allowed since QEMU 2.7
- len (int) -- Estimated offset value at the completion of the job. This value can arbitrarily change while the job is running, in both directions.
- offset (int) -- Progress made until now. The unit is arbitrary and the value can only meaningfully be used for the ratio of offset to len. The value is monotonically increasing.
- busy (boolean) -- false if the job is known to be in a quiescent state, with no pending I/O. (Since 1.3)
- paused (boolean) -- whether the job is paused or, if busy is true, will pause itself as soon as possible. (Since 1.3)
- speed (int) -- the rate limit, bytes per second
- io-status (BlockDeviceIoStatus) -- the status of the job (since 1.3)
- ready (boolean) -- true if the job may be completed (since 2.2)
- status (JobStatus) -- Current job state/status (since 2.12)
- auto-finalize (boolean) -- Job will finalize itself when PENDING, moving to the CONCLUDED state. (since 2.12)
- auto-dismiss (boolean) -- Job will dismiss itself when CONCLUDED, and disappear. (since 2.12)
- error (string, optional) -- Error information if the job did not complete successfully. Not set if the job completed successfully. (since 2.12.1)
- When type is mirror: The members of BlockJobInfoMirror.
- Command query-block-jobs (Since: 1.1)
- Return information about long-running block device operations.
- Return
- [BlockJobInfo] -- a list of job info for each active block job
- Command block_resize (Since: 0.14)
- Resize a block image while a guest is running.
Either device or node-name must be set but not both.
- device (string, optional) -- the name of the device to get the image resized
- node-name (string, optional) -- graph node name to get the image resized (Since 2.0)
- size (int) -- new image size in bytes
- If device is not a valid block device, DeviceNotFound
-> { "execute": "block_resize",
"arguments": { "device": "scratch", "size": 1073741824 } }
<- { "return": {} }
- Enum NewImageMode (Since: 1.1)
- An enumeration that tells QEMU how to set the backing file path in a new image file.
- existing -- QEMU should look for an existing image file.
- absolute-paths -- QEMU should create a new image with absolute paths for the backing file. If there is no backing file available, the new image will not be backed either.
- Object BlockdevSnapshotSync
- Either device or node-name must be set but not both.
- device (string, optional) -- the name of the device to take a snapshot of.
- node-name (string, optional) -- graph node name to generate the snapshot from (Since 2.0)
- snapshot-file (string) -- the target of the new overlay image. If the file exists, or if it is a device, the overlay will be created in the existing file/device. Otherwise, a new file will be created.
- snapshot-node-name (string, optional) -- the graph node name of the new image (Since 2.0)
- format (string, optional) -- the format of the overlay image, default is 'qcow2'.
- mode (NewImageMode, optional) -- whether and how QEMU should create a new image, default is 'absolute-paths'.
- node (string) -- device or node name that will have a snapshot taken.
- overlay (string) -- reference to the existing block device that will become the overlay of node, as part of taking the snapshot. It must not have a current backing file (this can be achieved by passing "backing": null to blockdev-add).
- Object BackupPerf (Since: 6.0)
- Optional parameters for backup. These parameters don't affect functionality, but may significantly affect performance.
- use-copy-range (boolean, optional) -- Use copy offloading. Default false.
- max-workers (int, optional) -- Maximum number of parallel requests for the sustained background copying process. Doesn't influence copy-before-write operations. Default 64.
- max-chunk (int, optional) -- Maximum request length for the sustained background copying process. Doesn't influence copy-before-write operations. 0 means unlimited. If max-chunk is non-zero then it should not be less than job cluster size which is calculated as maximum of target image cluster size and 64k. Default 0.
- min-cluster-size (int, optional) -- Minimum size of blocks used by copy-before-write and background copy operations. Has to be a power of 2. No effect if smaller than the maximum of the target's cluster size and 64 KiB. Default 0. (Since 9.2)
- job-id (string, optional) -- identifier for the newly-created block job. If omitted, the device name will be used. (Since 2.7)
- device (string) -- the device name or node-name of a root node which should be copied.
- sync (MirrorSyncMode) -- what parts of the disk image should be copied to the destination (all the disk, only the sectors allocated in the topmost image, from a dirty bitmap, or only new I/O).
- speed (int, optional) -- the maximum speed, in bytes per second. The default is 0, for unlimited.
- bitmap (string, optional) -- The name of a dirty bitmap to use. Must be present if sync is "bitmap" or "incremental". Can be present if sync is "full" or "top". Must not be present otherwise. (Since 2.4 (drive-backup), 3.1 (blockdev-backup))
- bitmap-mode (BitmapSyncMode, optional) -- Specifies the type of data the bitmap should contain after the operation concludes. Must be present if a bitmap was provided, must not be present otherwise. (Since 4.2)
- compress (boolean, optional) -- true to compress data, if the target format supports it. (default: false) (since 2.8)
- on-source-error (BlockdevOnError, optional) -- the action to take on an error on the source, default 'report'. 'stop' and 'enospc' can only be used if the block device supports io-status (see BlockInfo).
- on-target-error (BlockdevOnError, optional) -- the action to take on an error on the target, default 'report' (no limitations, since this applies to a different block device than device).
- on-cbw-error (OnCbwError, optional) -- policy defining behavior on I/O errors in copy-before-write jobs; defaults to break-guest-write. (Since 10.1)
- auto-finalize (boolean, optional) -- When false, this job will wait in a PENDING state after it has finished its work, waiting for job-finalize before making any block graph changes. When true, this job will automatically perform its abort or commit actions. Defaults to true. (Since 2.12)
- auto-dismiss (boolean, optional) -- When false, this job will wait in a CONCLUDED state after it has completely ceased all work, and awaits job-dismiss. When true, this job will automatically disappear without user intervention. Defaults to true. (Since 2.12)
- filter-node-name (string, optional) -- the node name that should be assigned to the filter driver that the backup job inserts into the graph above node specified by drive. If this option is not given, a node name is autogenerated. (Since: 4.2)
- discard-source (boolean, optional) -- Discard blocks on source which have already been copied to the target. (Since 9.1)
- x-perf (BackupPerf, optional) -- Performance options. (Since 6.0)
- unstable -- Member x-perf is experimental.
Note:
on-source-error and on-target-error only
affect background I/O. If an error occurs during a guest write request, the
device's rerror/werror actions will be used.
- target (string) -- the target of the new image. If the file exists, or if it is a device, the existing file/device will be used as the new destination. If it does not exist, a new file will be created.
- format (string, optional) -- the format of the new destination, default is to probe if mode is 'existing', else the format of the source
- mode (NewImageMode, optional) -- whether and how QEMU should create a new image, default is 'absolute-paths'.
- The members of BackupCommon.
- target (string) -- the device name or node-name of the backup target node.
- The members of BackupCommon.
- Command blockdev-snapshot-sync (Since: 0.14)
- Takes a synchronous snapshot of a block device.
- The members of BlockdevSnapshotSync.
- If device is not a valid block device, DeviceNotFound
-> { "execute": "blockdev-snapshot-sync",
"arguments": { "device": "ide-hd0",
"snapshot-file":
"/some/place/my-image",
"format": "qcow2" } }
<- { "return": {} }
- Command blockdev-snapshot (Since: 2.5)
- Takes a snapshot of a block device.
Take a snapshot, by installing 'node' as the backing image of 'overlay'. Additionally, if 'node' is associated with a block device, the block device changes to using 'overlay' as its new active image.
- The members of BlockdevSnapshot.
- allow-write-only-overlay -- If present, the check whether this operation is safe was relaxed so that it can be used to change backing file of a destination of a blockdev-mirror. (since 5.0)
-> { "execute": "blockdev-add",
"arguments": { "driver": "qcow2",
"node-name": "node1534",
"file": { "driver": "file",
"filename": "hd1.qcow2" },
"backing": null } }
<- { "return": {} }
-> { "execute": "blockdev-snapshot",
"arguments": { "node": "ide-hd0",
"overlay": "node1534" } }
<- { "return": {} }
- Command change-backing-file (Since: 2.1)
- Change the backing file in the image file metadata. This does not cause QEMU to reopen the image file to reparse the backing filename (it may, however, perform a reopen to change permissions from r/o -> r/w -> r/o, if needed). The new backing file string is written into the image file metadata, and the QEMU internal strings are updated.
- image-node-name (string) -- The name of the block driver state node of the image to modify. The "device" argument is used to verify "image-node-name" is in the chain described by "device".
- device (string) -- The device name or node-name of the root node that owns image-node-name.
- backing-file (string) -- The string to write as the backing file. This string is not validated, so care should be taken when specifying the string or the image chain may not be able to be reopened again.
- If "device" does not exist or cannot be determined, DeviceNotFound
- Command block-commit (Since: 1.3)
- Live commit of data from overlay image nodes into backing nodes - i.e.,
writes data between 'top' and 'base' into 'base'.
If top == base, that is an error. If top has no overlays on top of it, or if it is in use by a writer, the job will not be completed by itself. The user needs to complete the job with the job-complete command after getting the ready event. (Since 2.0)
If the base image is smaller than top, then the base image will be resized to be the same size as top. If top is smaller than the base image, the base will not be truncated. If you want the base image size to match the size of the smaller top, you can safely truncate it yourself once the commit operation successfully completes.
- job-id (string, optional) -- identifier for the newly-created block job. If omitted, the device name will be used. (Since 2.7)
- device (string) -- the device name or node-name of a root node
- base-node (string, optional) -- The node name of the backing image to write data into. If not specified, this is the deepest backing image. (since: 3.1)
- base (string, optional) -- Same as base-node, except that it is a file name rather than a node name. This must be the exact filename string that was used to open the node; other strings, even if addressing the same file, are not accepted
- top-node (string, optional) -- The node name of the backing image within the image chain which contains the topmost data to be committed down. If not specified, this is the active layer. (since: 3.1)
- top (string, optional) -- Same as top-node, except that it is a file name rather than a node name. This must be the exact filename string that was used to open the node; other strings, even if addressing the same file, are not accepted
- backing-file (string, optional) --
The backing file string to write into the overlay image of 'top'. If 'top' does not have an overlay image, or if 'top' is in use by a writer, specifying a backing file string is an error.
This filename is not validated. If a pathname string is such that it cannot be resolved by QEMU, that means that subsequent QMP or HMP commands must use node-names for the image in question, as filename lookup methods will fail.
If not specified, QEMU will automatically determine the backing file string to use, or error out if there is no obvious choice. Care should be taken when specifying the string, to specify a valid filename or protocol. (Since 2.1)
- backing-mask-protocol (boolean, optional) -- If true, replace any protocol mentioned in the 'backing file format' with 'raw', rather than storing the protocol name as the backing format. Can be used even when no image header will be updated (default false; since 9.0).
- speed (int, optional) -- the maximum speed, in bytes per second
- on-error (BlockdevOnError, optional) -- the action to take on an error. 'ignore' means that the request should be retried. (default: report; since: 5.0)
- filter-node-name (string, optional) -- the node name that should be assigned to the filter driver that the commit job inserts into the graph above top. If this option is not given, a node name is autogenerated. (Since: 2.9)
- auto-finalize (boolean, optional) -- When false, this job will wait in a PENDING state after it has finished its work, waiting for job-finalize before making any block graph changes. When true, this job will automatically perform its abort or commit actions. Defaults to true. (Since 3.1)
- auto-dismiss (boolean, optional) -- When false, this job will wait in a CONCLUDED state after it has completely ceased all work, and awaits job-dismiss. When true, this job will automatically disappear without user intervention. Defaults to true. (Since 3.1)
- deprecated -- Members base and top are deprecated. Use base-node and top-node instead.
- If device does not exist, DeviceNotFound
-> { "execute": "block-commit",
"arguments": { "device": "virtio0",
"top": "/tmp/snap1.qcow2" } }
<- { "return": {} }
- Command drive-backup (Since: 1.6)
- This command is deprecated.
Start a point-in-time copy of a block device to a new destination. The status of ongoing drive-backup operations can be checked with query-block-jobs where the BlockJobInfo.type field has the value 'backup'. The operation can be stopped before it has completed using the job-cancel or block-job-cancel command.
- The members of DriveBackup.
- deprecated -- This command is deprecated. Use blockdev-backup instead.
- If device is not a valid block device, GenericError
-> { "execute": "drive-backup",
"arguments": { "device": "drive0",
"sync": "full",
"target": "backup.img" } }
<- { "return": {} }
- Command blockdev-backup (Since: 2.3)
- Start a point-in-time copy of a block device to a new destination. The status of ongoing blockdev-backup operations can be checked with query-block-jobs where the BlockJobInfo.type field has the value 'backup'. The operation can be stopped before it has completed using the job-cancel or block-job-cancel command.
- The members of BlockdevBackup.
- If device is not a valid block device, DeviceNotFound
-> { "execute": "blockdev-backup",
"arguments": { "device": "src-id",
"sync": "full",
"target": "tgt-id" } }
<- { "return": {} }
- Command query-named-block-nodes (Since: 2.0)
- Get the named block driver list
- flat (boolean, optional) -- Omit the nested data about backing image ("backing-image" key) if true. Default is false (Since 5.0)
- Return
- [BlockDeviceInfo]
-> { "execute": "query-named-block-nodes" }
<- { "return": [ { "ro":false,
"drv":"qcow2",
"encrypted":false,
"file":"disks/test.qcow2",
"node-name": "my-node",
"backing_file_depth":1,
"detect_zeroes":"off",
"bps":1000000,
"bps_rd":0,
"bps_wr":0,
"iops":1000000,
"iops_rd":0,
"iops_wr":0,
"bps_max": 8000000,
"bps_rd_max": 0,
"bps_wr_max": 0,
"iops_max": 0,
"iops_rd_max": 0,
"iops_wr_max": 0,
"iops_size": 0,
"write_threshold": 0,
"image":{
"filename":"disks/test.qcow2",
"format":"qcow2",
"virtual-size":2048000,
"backing_file":"base.qcow2",
"full-backing-filename":"disks/base.qcow2",
"backing-filename-format":"qcow2",
"snapshots":[
{
"id": "1",
"name": "snapshot1",
"vm-state-size": 0,
"date-sec": 10000200,
"date-nsec": 12,
"vm-clock-sec": 206,
"vm-clock-nsec": 30
}
],
"backing-image":{
"filename":"disks/base.qcow2",
"format":"qcow2",
"virtual-size":2048000
}
} } ] }
- block-backend -- corresponds to BlockBackend
- block-job -- corresponds to BlockJob
- block-driver -- corresponds to BlockDriverState
- id (int) -- Block graph node identifier. This id is generated only for x-debug-query-block-graph and does not relate to any other identifiers in QEMU.
- type (XDbgBlockGraphNodeType) -- Type of graph node. Can be one of block-backend, block-job or block-driver-state.
- name (string) -- Human readable name of the node. Corresponds to node-name for block-driver-state nodes; is not guaranteed to be unique in the whole graph (with block-jobs and block-backends).
- Enum BlockPermission (Since: 4.0)
- Enum of base block permissions.
- consistent-read -- A user that has the "permission" of consistent reads is guaranteed that their view of the contents of the block device is complete and self-consistent, representing the contents of a disk at a specific point. For most block devices (including their backing files) this is true, but the property cannot be maintained in a few situations like for intermediate nodes of a commit block job.
- write -- This permission is required to change the visible disk contents.
- write-unchanged -- This permission (which is weaker than BLK_PERM_WRITE) is both enough and required for writes to the block node when the caller promises that the visible disk content doesn't change. As the BLK_PERM_WRITE permission is strictly stronger, either is sufficient to perform an unchanging write.
- resize -- This permission is required to change the size of a block node.
- Object XDbgBlockGraphEdge (Since: 4.0)
- Block Graph edge description for x-debug-query-block-graph.
- parent (int) -- parent id
- child (int) -- child id
- name (string) -- name of the relation (examples are 'file' and 'backing')
- perm ([BlockPermission]) -- granted permissions for the parent operating on the child
- shared-perm ([BlockPermission]) -- permissions that can still be granted to other users of the child while it is still attached to this parent
- Object XDbgBlockGraph (Since: 4.0)
- Block Graph - list of nodes and list of edges.
- nodes ([XDbgBlockGraphNode]) -- Not documented
- edges ([XDbgBlockGraphEdge]) -- Not documented
- Command x-debug-query-block-graph (Since: 4.0)
- This command is unstable/experimental.
Get the block graph.
- Command drive-mirror (Since: 1.3)
- Start mirroring a block device's writes to a new destination. target specifies the target of the new image. If the file exists, or if it is a device, it will be used as the new destination for writes. If it does not exist, a new file will be created. format specifies the format of the mirror image, default is to probe if mode='existing', else the format of the source.
-> { "execute": "drive-mirror",
"arguments": { "device": "ide-hd0",
"target": "/some/place/my-image",
"sync": "full",
"format": "qcow2" } }
<- { "return": {} }
- Object DriveMirror (Since: 1.3)
- A set of parameters describing drive mirror setup.
- job-id (string, optional) -- identifier for the newly-created block job. If omitted, the device name will be used. (Since 2.7)
- device (string) -- the device name or node-name of a root node whose writes should be mirrored.
- target (string) -- the target of the new image. If the file exists, or if it is a device, the existing file/device will be used as the new destination. If it does not exist, a new file will be created.
- format (string, optional) -- the format of the new destination, default is to probe if mode is 'existing', else the format of the source
- node-name (string, optional) -- the new block driver state node name in the graph (Since 2.1)
- replaces (string, optional) -- with sync=full graph node name to be replaced by the new image when a whole image copy is done. This can be used to repair broken Quorum files. By default, device is replaced, although implicitly created filters on it are kept. (Since 2.1)
- mode (NewImageMode, optional) -- whether and how QEMU should create a new image, default is 'absolute-paths'.
- speed (int, optional) -- the maximum speed, in bytes per second
- sync (MirrorSyncMode) -- what parts of the disk image should be copied to the destination (all the disk, only the sectors allocated in the topmost image, or only new I/O).
- granularity (int, optional) -- granularity of the dirty bitmap, default is 64K if the image format doesn't have clusters, 4K if the clusters are smaller than that, else the cluster size. Must be a power of 2 between 512 and 64M (since 1.4).
- buf-size (int, optional) -- maximum amount of data in flight from source to target (since 1.4).
- on-source-error (BlockdevOnError, optional) -- the action to take on an error on the source, default 'report'. 'stop' and 'enospc' can only be used if the block device supports io-status (see BlockInfo).
- on-target-error (BlockdevOnError, optional) -- the action to take on an error on the target, default 'report' (no limitations, since this applies to a different block device than device).
- unmap (boolean, optional) -- Whether to try to unmap target sectors where source has only zero. If true, and target unallocated sectors will read as zero, target image sectors will be unmapped; otherwise, zeroes will be written. Both will result in identical contents. Default is true. (Since 2.4)
- copy-mode (MirrorCopyMode, optional) -- when to copy data to the destination; defaults to 'background' (Since: 3.0)
- auto-finalize (boolean, optional) -- When false, this job will wait in a PENDING state after it has finished its work, waiting for job-finalize before making any block graph changes. When true, this job will automatically perform its abort or commit actions. Defaults to true. (Since 3.1)
- auto-dismiss (boolean, optional) -- When false, this job will wait in a CONCLUDED state after it has completely ceased all work, and awaits job-dismiss. When true, this job will automatically disappear without user intervention. Defaults to true. (Since 3.1)
- node (string) -- name of device/node which the bitmap is tracking
- name (string) -- name of the dirty bitmap
- node (string) -- name of device/node which the bitmap is tracking
- name (string) -- name of the dirty bitmap (must be less than 1024 bytes)
- granularity (int, optional) -- the bitmap granularity, default is 64k for block-dirty-bitmap-add
- persistent (boolean, optional) -- the bitmap is persistent, i.e. it will be saved to the corresponding block device image file on its close. For now only Qcow2 disks support persistent bitmaps. Default is false for block-dirty-bitmap-add. (Since: 2.10)
- disabled (boolean, optional) -- the bitmap is created in the disabled state, which means that it will not track drive changes. The bitmap may be enabled with block-dirty-bitmap-enable. Default is false. (Since: 4.0)
- local (string) -- name of the bitmap, attached to the same node as target bitmap.
- external (BlockDirtyBitmap) -- bitmap with specified node
- node (string) -- name of device/node which the target bitmap is tracking
- target (string) -- name of the destination dirty bitmap
- bitmaps ([BlockDirtyBitmapOrStr]) -- name(s) of the source dirty bitmap(s) at node and/or fully specified BlockDirtyBitmap elements. The latter are supported since 4.1.
- Command block-dirty-bitmap-add (Since: 2.4)
- Create a dirty bitmap with a name on the node, and start tracking the writes.
- The members of BlockDirtyBitmapAdd.
- If node is not a valid block device or node, DeviceNotFound
- If name is already taken, GenericError
-> { "execute": "block-dirty-bitmap-add",
"arguments": { "node": "drive0", "name": "bitmap0" } }
<- { "return": {} }
- Command block-dirty-bitmap-remove (Since: 2.4)
- Stop write tracking and remove the dirty bitmap that was created with block-dirty-bitmap-add. If the bitmap is persistent, remove it from its storage too.
- The members of BlockDirtyBitmap.
- If node is not a valid block device or node, DeviceNotFound
- If name is not found, GenericError
- if name is frozen by an operation, GenericError
-> { "execute": "block-dirty-bitmap-remove",
"arguments": { "node": "drive0", "name": "bitmap0" } }
<- { "return": {} }
- Command block-dirty-bitmap-clear (Since: 2.4)
- Clear (reset) a dirty bitmap on the device, so that an incremental backup from this point in time forward will only backup clusters modified after this clear operation.
- The members of BlockDirtyBitmap.
- If node is not a valid block device, DeviceNotFound
- If name is not found, GenericError
-> { "execute": "block-dirty-bitmap-clear",
"arguments": { "node": "drive0", "name": "bitmap0" } }
<- { "return": {} }
- Command block-dirty-bitmap-enable (Since: 4.0)
- Enables a dirty bitmap so that it will begin tracking disk changes.
- The members of BlockDirtyBitmap.
- If node is not a valid block device, DeviceNotFound
- If name is not found, GenericError
-> { "execute": "block-dirty-bitmap-enable",
"arguments": { "node": "drive0", "name": "bitmap0" } }
<- { "return": {} }
- Command block-dirty-bitmap-disable (Since: 4.0)
- Disables a dirty bitmap so that it will stop tracking disk changes.
- The members of BlockDirtyBitmap.
- If node is not a valid block device, DeviceNotFound
- If name is not found, GenericError
-> { "execute": "block-dirty-bitmap-disable",
"arguments": { "node": "drive0", "name": "bitmap0" } }
<- { "return": {} }
- Command block-dirty-bitmap-merge (Since: 4.0)
- Merge dirty bitmaps listed in bitmaps to the target dirty
bitmap. Dirty bitmaps in bitmaps will be unchanged, except if it
also appears as the target bitmap. Any bits already set in
target will still be set after the merge, i.e., this operation does
not clear the target. On error, target is unchanged.
The resulting bitmap will count as dirty any clusters that were dirty in any of the source bitmaps. This can be used to achieve backup checkpoints, or in simpler usages, to copy bitmaps.
- The members of BlockDirtyBitmapMerge.
- If node is not a valid block device, DeviceNotFound
- If any bitmap in bitmaps or target is not found, GenericError
- If any of the bitmaps have different sizes or granularities, GenericError
-> { "execute": "block-dirty-bitmap-merge",
"arguments": { "node": "drive0", "target": "bitmap0",
"bitmaps": ["bitmap1"] } }
<- { "return": {} }
- Object BlockDirtyBitmapSha256 (Since: 2.10)
- SHA256 hash of dirty bitmap data
- Command x-debug-block-dirty-bitmap-sha256 (Since: 2.10)
- This command is unstable/experimental.
Get bitmap SHA256.
- The members of BlockDirtyBitmap.
- unstable -- This command is meant for debugging.
- If node is not a valid block device, DeviceNotFound
- If name is not found or if hashing has failed, GenericError
- Command blockdev-mirror (Since: 2.6)
- Start mirroring a block device's writes to a new destination.
- job-id (string, optional) -- identifier for the newly-created block job. If omitted, the device name will be used. (Since 2.7)
- device (string) -- The device name or node-name of a root node whose writes should be mirrored.
- target (string) -- the id or node-name of the block device to mirror to. This mustn't be attached to guest.
- replaces (string, optional) -- with sync=full graph node name to be replaced by the new image when a whole image copy is done. This can be used to repair broken Quorum files. By default, device is replaced, although implicitly created filters on it are kept.
- speed (int, optional) -- the maximum speed, in bytes per second
- sync (MirrorSyncMode) -- what parts of the disk image should be copied to the destination (all the disk, only the sectors allocated in the topmost image, or only new I/O).
- granularity (int, optional) -- granularity of the dirty bitmap, default is 64K if the image format doesn't have clusters, 4K if the clusters are smaller than that, else the cluster size. Must be a power of 2 between 512 and 64M
- buf-size (int, optional) -- maximum amount of data in flight from source to target
- on-source-error (BlockdevOnError, optional) -- the action to take on an error on the source, default 'report'. 'stop' and 'enospc' can only be used if the block device supports io-status (see BlockInfo).
- on-target-error (BlockdevOnError, optional) -- the action to take on an error on the target, default 'report' (no limitations, since this applies to a different block device than device).
- filter-node-name (string, optional) -- the node name that should be assigned to the filter driver that the mirror job inserts into the graph above device. If this option is not given, a node name is autogenerated. (Since: 2.9)
- copy-mode (MirrorCopyMode, optional) -- when to copy data to the destination; defaults to 'background' (Since: 3.0)
- auto-finalize (boolean, optional) -- When false, this job will wait in a PENDING state after it has finished its work, waiting for job-finalize before making any block graph changes. When true, this job will automatically perform its abort or commit actions. Defaults to true. (Since 3.1)
- auto-dismiss (boolean, optional) -- When false, this job will wait in a CONCLUDED state after it has completely ceased all work, and awaits job-dismiss. When true, this job will automatically disappear without user intervention. Defaults to true. (Since 3.1)
- target-is-zero (boolean, optional) -- Assume the destination reads as all zeroes before the mirror started. Setting this to true can speed up the mirror. Setting this to true when the destination is not actually all zero can corrupt the destination. (Since 10.1)
-> { "execute": "blockdev-mirror",
"arguments": { "device": "ide-hd0",
"target": "target0",
"sync": "full" } }
<- { "return": {} }
- Object BlockIOThrottle (Since: 1.1)
- A set of parameters describing block throttling.
- device (string, optional) -- Block device name
- id (string, optional) -- The name or QOM path of the guest device (since: 2.8)
- bps (int) -- total throughput limit in bytes per second
- bps_rd (int) -- read throughput limit in bytes per second
- bps_wr (int) -- write throughput limit in bytes per second
- iops (int) -- total I/O operations per second
- iops_rd (int) -- read I/O operations per second
- iops_wr (int) -- write I/O operations per second
- bps_max (int, optional) -- total throughput limit during bursts, in bytes (Since 1.7)
- bps_rd_max (int, optional) -- read throughput limit during bursts, in bytes (Since 1.7)
- bps_wr_max (int, optional) -- write throughput limit during bursts, in bytes (Since 1.7)
- iops_max (int, optional) -- total I/O operations per second during bursts, in bytes (Since 1.7)
- iops_rd_max (int, optional) -- read I/O operations per second during bursts, in bytes (Since 1.7)
- iops_wr_max (int, optional) -- write I/O operations per second during bursts, in bytes (Since 1.7)
- bps_max_length (int, optional) -- maximum length of the bps_max burst period, in seconds. It must only be set if bps_max is set as well. Defaults to 1. (Since 2.6)
- bps_rd_max_length (int, optional) -- maximum length of the bps_rd_max burst period, in seconds. It must only be set if bps_rd_max is set as well. Defaults to 1. (Since 2.6)
- bps_wr_max_length (int, optional) -- maximum length of the bps_wr_max burst period, in seconds. It must only be set if bps_wr_max is set as well. Defaults to 1. (Since 2.6)
- iops_max_length (int, optional) -- maximum length of the iops burst period, in seconds. It must only be set if iops_max is set as well. Defaults to 1. (Since 2.6)
- iops_rd_max_length (int, optional) -- maximum length of the iops_rd_max burst period, in seconds. It must only be set if iops_rd_max is set as well. Defaults to 1. (Since 2.6)
- iops_wr_max_length (int, optional) -- maximum length of the iops_wr_max burst period, in seconds. It must only be set if iops_wr_max is set as well. Defaults to 1. (Since 2.6)
- iops_size (int, optional) -- an I/O size in bytes (Since 1.7)
- group (string, optional) -- throttle group name (Since 2.4)
- deprecated -- Member device is deprecated. Use id instead.
- Object ThrottleLimits (Since: 2.11)
- Limit parameters for throttling. Since some limit combinations are illegal, limits should always be set in one transaction. All fields are optional. When setting limits, if a field is missing the current value is not changed.
- iops-total (int, optional) -- limit total I/O operations per second
- iops-total-max (int, optional) -- I/O operations burst
- iops-total-max-length (int, optional) -- length of the iops-total-max burst period, in seconds. It must only be set if iops-total-max is set as well.
- iops-read (int, optional) -- limit read operations per second
- iops-read-max (int, optional) -- I/O operations read burst
- iops-read-max-length (int, optional) -- length of the iops-read-max burst period, in seconds. It must only be set if iops-read-max is set as well.
- iops-write (int, optional) -- limit write operations per second
- iops-write-max (int, optional) -- I/O operations write burst
- iops-write-max-length (int, optional) -- length of the iops-write-max burst period, in seconds. It must only be set if iops-write-max is set as well.
- bps-total (int, optional) -- limit total bytes per second
- bps-total-max (int, optional) -- total bytes burst
- bps-total-max-length (int, optional) -- length of the bps-total-max burst period, in seconds. It must only be set if bps-total-max is set as well.
- bps-read (int, optional) -- limit read bytes per second
- bps-read-max (int, optional) -- total bytes read burst
- bps-read-max-length (int, optional) -- length of the bps-read-max burst period, in seconds. It must only be set if bps-read-max is set as well.
- bps-write (int, optional) -- limit write bytes per second
- bps-write-max (int, optional) -- total bytes write burst
- bps-write-max-length (int, optional) -- length of the bps-write-max burst period, in seconds. It must only be set if bps-write-max is set as well.
- iops-size (int, optional) -- when limiting by iops max size of an I/O in bytes
- Object ThrottleGroupProperties (Since: 2.11)
- Properties for throttle-group objects.
- limits (ThrottleLimits, optional) -- limits to apply for this throttle group
- x-iops-total (int, optional) -- Not documented
- x-iops-total-max (int, optional) -- Not documented
- x-iops-total-max-length (int, optional) -- Not documented
- x-iops-read (int, optional) -- Not documented
- x-iops-read-max (int, optional) -- Not documented
- x-iops-read-max-length (int, optional) -- Not documented
- x-iops-write (int, optional) -- Not documented
- x-iops-write-max (int, optional) -- Not documented
- x-iops-write-max-length (int, optional) -- Not documented
- x-bps-total (int, optional) -- Not documented
- x-bps-total-max (int, optional) -- Not documented
- x-bps-total-max-length (int, optional) -- Not documented
- x-bps-read (int, optional) -- Not documented
- x-bps-read-max (int, optional) -- Not documented
- x-bps-read-max-length (int, optional) -- Not documented
- x-bps-write (int, optional) -- Not documented
- x-bps-write-max (int, optional) -- Not documented
- x-bps-write-max-length (int, optional) -- Not documented
- x-iops-size (int, optional) -- Not documented
- unstable -- All members starting with x- are aliases for the same key without x- in the limits object. This is not a stable interface and may be removed or changed incompatibly in the future. Use limits for a supported stable interface.
- Command block-stream (Since: 1.1)
- Copy data from a backing file into a block device.
The block streaming operation is performed in the background until the entire backing file has been copied. This command returns immediately once streaming has started. The status of ongoing block streaming operations can be checked with query-block-jobs. The operation can be stopped before it has completed using the job-cancel or block-job-cancel command.
The node that receives the data is called the top image, can be located in any part of the chain (but always above the base image; see below) and can be specified using its device or node name. Earlier QEMU versions only allowed 'device' to name the top level node; presence of the 'base-node' parameter during introspection can be used as a witness of the enhanced semantics of 'device'.
If a base file is specified then sectors are not copied from that base file and its backing chain. This can be used to stream a subset of the backing file chain instead of flattening the entire image. When streaming completes the image file will have the base file as its backing file, unless that node was changed while the job was running. In that case, base's parent's backing (or filtered, whichever exists) child (i.e., base at the beginning of the job) will be the new backing file.
On successful completion the image file is updated to drop the backing file and the BLOCK_JOB_COMPLETED event is emitted.
In case device is a filter node, block-stream modifies the first non-filter overlay node below it to point to the new backing node instead of modifying device itself.
- job-id (string, optional) -- identifier for the newly-created block job. If omitted, the device name will be used. (Since 2.7)
- device (string) -- the device or node name of the top image
- base (string, optional) -- the common backing file name. It cannot be set if base-node or bottom is also set.
- base-node (string, optional) -- the node name of the backing file. It cannot be set if base or bottom is also set. (Since 2.8)
- bottom (string, optional) -- the last node in the chain that should be streamed into top. It cannot be set if base or base-node is also set. It cannot be filter node. (Since 6.0)
- backing-file (string, optional) --
The backing file string to write into the top image. This filename is not validated.
If a pathname string is such that it cannot be resolved by QEMU, that means that subsequent QMP or HMP commands must use node-names for the image in question, as filename lookup methods will fail.
If not specified, QEMU will automatically determine the backing file string to use, or error out if there is no obvious choice. Care should be taken when specifying the string, to specify a valid filename or protocol. (Since 2.1)
- backing-mask-protocol (boolean, optional) -- If true, replace any protocol mentioned in the 'backing file format' with 'raw', rather than storing the protocol name as the backing format. Can be used even when no image header will be updated (default false; since 9.0).
- speed (int, optional) -- the maximum speed, in bytes per second
- on-error (BlockdevOnError, optional) -- the action to take on an error (default report). 'stop' and 'enospc' can only be used if the block device supports io-status (see BlockInfo). (Since 1.3)
- filter-node-name (string, optional) -- the node name that should be assigned to the filter driver that the stream job inserts into the graph above device. If this option is not given, a node name is autogenerated. (Since: 6.0)
- auto-finalize (boolean, optional) -- When false, this job will wait in a PENDING state after it has finished its work, waiting for job-finalize before making any block graph changes. When true, this job will automatically perform its abort or commit actions. Defaults to true. (Since 3.1)
- auto-dismiss (boolean, optional) -- When false, this job will wait in a CONCLUDED state after it has completely ceased all work, and awaits job-dismiss. When true, this job will automatically disappear without user intervention. Defaults to true. (Since 3.1)
- If device does not exist, DeviceNotFound.
-> { "execute": "block-stream",
"arguments": { "device": "virtio0",
"base": "/tmp/master.qcow2" } }
<- { "return": {} }
- Command block-job-set-speed (Since: 1.1)
- Set maximum speed for a background block operation.
This command can only be issued when there is an active block job.
Throttling can be disabled by setting the speed to 0.
- device (string) -- The job identifier. This used to be a device name (hence the name of the parameter), but since QEMU 2.7 it can have other values.
- speed (int) -- the maximum speed, in bytes per second, or 0 for unlimited. Defaults to 0.
- If no background operation is active on this device, DeviceNotActive
- Command block-job-cancel (Since: 1.1)
- Stop an active background block operation.
This command returns immediately after marking the active background block operation for cancellation. It is an error to call this command if no operation is in progress.
The operation will cancel as soon as possible and then emit the BLOCK_JOB_CANCELLED event. Before that happens the job is still visible when enumerated using query-block-jobs.
Note that if you issue block-job-cancel after drive-mirror has indicated (via the event BLOCK_JOB_READY) that the source and destination are synchronized, then the event triggered by this command changes to BLOCK_JOB_COMPLETED, to indicate that the mirroring has ended and the destination now has a point-in-time copy tied to the time of the cancellation.
For streaming, the image file retains its backing file unless the streaming operation happens to complete just as it is being cancelled. A new streaming operation can be started at a later time to finish copying all data from the backing file.
- device (string) -- The job identifier. This used to be a device name (hence the name of the parameter), but since QEMU 2.7 it can have other values.
- force (boolean, optional) -- If true, and the job has already emitted the event BLOCK_JOB_READY, abandon the job immediately (even if it is paused) instead of waiting for the destination to complete its final synchronization (since 1.3)
- If no background operation is active on this device, DeviceNotActive
- Command block-job-pause (Since: 1.3)
- This command is deprecated.
Pause an active background block operation.
This command returns immediately after marking the active job for pausing. Pausing an already paused job is an error.
The job will pause as soon as possible, which means transitioning into the PAUSED state if it was RUNNING, or into STANDBY if it was READY. The corresponding JOB_STATUS_CHANGE event will be emitted.
Cancelling a paused job automatically resumes it.
- device (string) -- The job identifier. This used to be a device name (hence the name of the parameter), but since QEMU 2.7 it can have other values.
- deprecated -- This command is deprecated. Use job-pause instead.
- If no background operation is active on this device, DeviceNotActive
- Command block-job-resume (Since: 1.3)
- This command is deprecated.
Resume an active background block operation.
This command returns immediately after resuming a paused job. Resuming an already running job is an error.
This command also clears the error status of the job.
- device (string) -- The job identifier. This used to be a device name (hence the name of the parameter), but since QEMU 2.7 it can have other values.
- deprecated -- This command is deprecated. Use job-resume instead.
- If no background operation is active on this device, DeviceNotActive
- Command block-job-complete (Since: 1.3)
- This command is deprecated.
Manually trigger completion of an active job in the READY or STANDBY state. Completing the job in any other state is an error.
This is supported only for drive mirroring, where it also switches the device to write to the target path only. Note that drive mirroring includes drive-mirror, blockdev-mirror and block-commit job (only in case of "active commit", when the node being commited is used by the guest). The ability to complete is signaled with a BLOCK_JOB_READY event.
This command completes an active background block operation synchronously. The ordering of this command's return with the BLOCK_JOB_COMPLETED event is not defined. Note that if an I/O error occurs during the processing of this command: 1) the command itself will fail; 2) the error will be processed according to the rerror/werror arguments that were specified when starting the operation.
- device (string) -- The job identifier. This used to be a device name (hence the name of the parameter), but since QEMU 2.7 it can have other values.
- deprecated -- This command is deprecated. Use job-complete instead.
- If no background operation is active on this device, DeviceNotActive
- Command block-job-dismiss (Since: 2.12)
- This command is deprecated.
Deletes a job that is in the CONCLUDED state. This command only needs to be run explicitly for jobs that don't have automatic dismiss enabled. In turn, automatic dismiss may be enabled only for jobs that have auto-dismiss option, which are drive-backup, blockdev-backup, drive-mirror, blockdev-mirror, block-commit and block-stream. auto-dismiss is enabled by default for these jobs.
This command will refuse to operate on any job that has not yet reached its terminal state, CONCLUDED. For jobs that make use of the BLOCK_JOB_READY event, job-cancel, block-job-cancel or job-complete will still need to be used as appropriate.
- id (string) -- The job identifier.
- deprecated -- This command is deprecated. Use job-dismiss instead.
- Command block-job-finalize (Since: 2.12)
- This command is deprecated.
Instructs all jobs in a transaction (or a single job if it is not part of any transaction) to finalize any graph changes and do any necessary cleanup. This command requires that all involved jobs are in the PENDING state.
For jobs in a transaction, instructing one job to finalize will force ALL jobs in the transaction to finalize, so it is only necessary to instruct a single member job to finalize.
The command is applicable only to jobs which have auto-finalize option and only when this option is set to false.
- id (string) -- The job identifier.
- deprecated -- This command is deprecated. Use job-finalize instead.
- copy-mode (MirrorCopyMode) -- Switch to this copy mode. Currently, only the switch from 'background' to 'write-blocking' is implemented.
- Object BlockJobChangeOptions (Since: 8.2)
- Block job options that can be changed after job creation.
- id (string) -- The job identifier
- type (JobType) -- The job type
- When type is mirror: The members of BlockJobChangeOptionsMirror.
- Command block-job-change (Since: 8.2)
- Change the block job's options.
- Enum BlockdevDiscardOptions (Since: 2.9)
- Determines how to handle discard requests.
- Enum BlockdevDetectZeroesOptions (Since: 2.1)
- Describes the operation mode for the automatic conversion of plain zero writes by the OS to driver specific optimized zero write commands.
- off -- Disabled (default)
- on -- Enabled
- unmap -- Enabled and even try to unmap blocks if possible. This requires also that BlockdevDiscardOptions is set to unmap for this device.
- Enum BlockdevAioOptions (Since: 2.9)
- Selects the AIO backend to handle I/O requests
- threads -- Use QEMU's thread pool
- native -- Use native AIO backend (only Linux and Windows)
- io_uring -- Use linux io_uring (since 5.0)
- Object BlockdevCacheOptions (Since: 2.9)
- Includes cache-related options for block devices
- direct (boolean, optional) -- enables use of O_DIRECT (bypass the host page cache; default: false)
- no-flush (boolean, optional) -- ignore any flush requests for the device (default: false)
- Enum BlockdevDriver (Since: 2.9)
- Drivers that are supported in block device operations.
- throttle -- Since 2.11
- nvme -- Since 2.12
- copy-on-read -- Since 3.0
- blklogwrites -- Since 3.0
- blkreplay -- Since 4.2
- compress -- Since 5.0
- copy-before-write -- Since 6.2
- snapshot-access -- Since 7.0
- blkdebug -- Not documented
- blkverify -- Not documented
- bochs -- Not documented
- cloop -- Not documented
- dmg -- Not documented
- file -- Not documented
- ftp -- Not documented
- ftps -- Not documented
- gluster -- Not documented
- host_cdrom -- Not documented
- host_device -- Not documented
- http -- Not documented
- https -- Not documented
- io_uring -- Not documented
- iscsi -- Not documented
- luks -- Not documented
- nbd -- Not documented
- nfs -- Not documented
- null-aio -- Not documented
- null-co -- Not documented
- nvme-io_uring -- Not documented
- parallels -- Not documented
- preallocate -- Not documented
- qcow -- Not documented
- qcow2 -- Not documented
- qed -- Not documented
- quorum -- Not documented
- raw -- Not documented
- rbd -- Not documented
- replication -- Not documented
- ssh -- Not documented
- vdi -- Not documented
- vhdx -- Not documented
- virtio-blk-vfio-pci -- Not documented
- virtio-blk-vhost-user -- Not documented
- virtio-blk-vhost-vdpa -- Not documented
- vmdk -- Not documented
- vpc -- Not documented
- vvfat -- Not documented
- deprecated -- Member gluster is deprecated because GlusterFS development ceased.
- Object BlockdevOptionsFile (Since: 2.9)
- Driver specific block device options for the file backend.
- filename (string) -- path to the image file
- pr-manager (string, optional) -- the id for the object that will handle persistent reservations for this device (default: none, forward the commands via SG_IO; since 2.11)
- aio (BlockdevAioOptions, optional) -- AIO backend (default: threads) (since: 2.8)
- aio-max-batch (int, optional) -- maximum number of requests to batch together into a single submission in the AIO backend. The smallest value between this and the aio-max-batch value of the IOThread object is chosen. 0 means that the AIO backend will handle it automatically. (default: 0, since 6.2)
- locking (OnOffAuto, optional) -- whether to enable file locking. If set to 'auto', only enable when Open File Descriptor (OFD) locking API is available (default: auto, since 2.10)
- drop-cache (boolean, optional) -- invalidate page cache during live migration. This prevents stale data on the migration destination with cache.direct=off. Currently only supported on Linux hosts. (default: on, since: 4.0)
- x-check-cache-dropped (boolean, optional) -- whether to check that page cache was dropped on live migration. May cause noticeable delays if the image file is large, do not use in production. (default: off) (since: 3.0)
- dynamic-auto-read-only -- If present, enabled auto-read-only means that the driver will open the image read-only at first, dynamically reopen the image file read-write when the first writer is attached to the node and reopen read-only when the last writer is detached. This allows giving QEMU write permissions only on demand when an operation actually needs write access.
- unstable -- Member x-check-cache-dropped is meant for debugging.
- Object BlockdevOptionsNull (Since: 2.9)
- Driver specific block device options for the null backend.
- size (int, optional) -- size of the device in bytes.
- latency-ns (int, optional) -- emulated latency (in nanoseconds) in processing requests. Default to zero which completes requests immediately. (Since 2.4)
- read-zeroes (boolean, optional) -- if true, reads from the device produce zeroes; if false, the buffer is left unchanged. (default: false; since: 4.1)
- Object BlockdevOptionsNVMe (Since: 2.12)
- Driver specific block device options for the NVMe backend.
- device (string) -- PCI controller address of the NVMe device in format hhhh:bb:ss.f (host:bus:slot.function)
- namespace (int) -- namespace number of the device, starting from 1.
Note that the PCI device must have been unbound from any host kernel driver before instructing QEMU to add the blockdev.
- Object BlockdevOptionsVVFAT (Since: 2.9)
- Driver specific block device options for the vvfat protocol.
- dir (string) -- directory to be exported as FAT image
- fat-type (int, optional) -- FAT type: 12, 16 or 32
- floppy (boolean, optional) -- whether to export a floppy image (true) or partitioned hard disk (false; default)
- label (string, optional) -- set the volume label, limited to 11 bytes. FAT16 and FAT32 traditionally have some restrictions on labels, which are ignored by most operating systems. Defaults to "QEMU VVFAT". (since 2.4)
- rw (boolean, optional) -- whether to allow write operations (default: false)
- Object BlockdevOptionsGenericFormat (Since: 2.9)
- Driver specific block device options for image format that have no option besides their data source.
- Object BlockdevOptionsLUKS (Since: 2.9)
- Driver specific block device options for LUKS.
- key-secret (string, optional) -- the ID of a QCryptoSecret object providing the decryption key. Mandatory except when doing a metadata-only probe of the image. (since 2.6)
- header (BlockdevRef, optional) -- block device holding a detached LUKS header. (since 9.0)
- The members of BlockdevOptionsGenericFormat.
- Object BlockdevOptionsGenericCOWFormat (Since: 2.9)
- Driver specific block device options for image format that have no option besides their data source and an optional backing file.
- backing (BlockdevRefOrNull, optional) -- reference to or definition of the backing file block device, null disables the backing file entirely. Defaults to the backing file stored the image file.
- The members of BlockdevOptionsGenericFormat.
- Enum Qcow2OverlapCheckMode (Since: 2.9)
- General overlap check modes.
- none -- Do not perform any checks
- constant -- Perform only checks which can be done in constant time and without reading anything from disk
- cached -- Perform only checks which can be done without reading anything from disk
- all -- Perform all available overlap checks
- Object Qcow2OverlapCheckFlags (Since: 2.9)
- Structure of flags for each metadata structure. Setting a field to 'true' makes QEMU guard that Qcow2 format structure against unintended overwriting. See Qcow2 format specification for detailed information on these structures. The default value is chosen according to the template given.
- template (Qcow2OverlapCheckMode, optional) -- Specifies a template mode which can be adjusted using the other flags, defaults to 'cached'
- main-header (boolean, optional) -- Qcow2 format header
- active-l1 (boolean, optional) -- Qcow2 active L1 table
- active-l2 (boolean, optional) -- Qcow2 active L2 table
- refcount-table (boolean, optional) -- Qcow2 refcount table
- refcount-block (boolean, optional) -- Qcow2 refcount blocks
- snapshot-table (boolean, optional) -- Qcow2 snapshot table
- inactive-l1 (boolean, optional) -- Qcow2 inactive L1 tables
- inactive-l2 (boolean, optional) -- Qcow2 inactive L2 tables
- bitmap-directory (boolean, optional) -- Qcow2 bitmap directory (since 3.0)
- Alternate Qcow2OverlapChecks (Since: 2.9)
- Specifies which metadata structures should be guarded against unintended overwriting.
- flags (Qcow2OverlapCheckFlags) -- set of flags for separate specification of each metadata structure type
- mode (Qcow2OverlapCheckMode) -- named mode which chooses a specific set of flags
- format (BlockdevQcowEncryptionFormat) -- encryption format
- When format is aes: The members of QCryptoBlockOptionsQCow.
- Object BlockdevOptionsQcow (Since: 2.10)
- Driver specific block device options for qcow.
- encrypt (BlockdevQcowEncryption, optional) -- Image decryption options. Mandatory for encrypted images, except when doing a metadata-only probe of the image.
- The members of BlockdevOptionsGenericCOWFormat.
- format (BlockdevQcow2EncryptionFormat) -- encryption format
- When format is aes: The members of QCryptoBlockOptionsQCow.
- When format is luks: The members of QCryptoBlockOptionsLUKS.
- Object BlockdevOptionsPreallocate (Since: 6.0)
- Filter driver intended to be inserted between format and protocol node and do preallocation in protocol node on write.
- prealloc-align (int, optional) -- on preallocation, align file length to this number, default 1048576 (1M)
- prealloc-size (int, optional) -- how much to preallocate, default 134217728 (128M)
- The members of BlockdevOptionsGenericFormat.
- Object BlockdevOptionsQcow2 (Since: 2.9)
- Driver specific block device options for qcow2.
- lazy-refcounts (boolean, optional) -- whether to enable the lazy refcounts feature (default is taken from the image file)
- pass-discard-request (boolean, optional) -- whether discard requests to the qcow2 device should be forwarded to the data source
- pass-discard-snapshot (boolean, optional) -- whether discard requests for the data source should be issued when a snapshot operation (e.g. deleting a snapshot) frees clusters in the qcow2 file
- pass-discard-other (boolean, optional) -- whether discard requests for the data source should be issued on other occasions where a cluster gets freed
- discard-no-unref (boolean, optional) -- when enabled, data clusters will remain preallocated when they are no longer used, e.g. because they are discarded or converted to zero clusters. As usual, whether the old data is discarded or kept on the protocol level (i.e. in the image file) depends on the setting of the pass-discard-request option. Keeping the clusters preallocated prevents qcow2 fragmentation that would otherwise be caused by freeing and re-allocating them later. Besides potential performance degradation, such fragmentation can lead to increased allocation of clusters past the end of the image file, resulting in image files whose file length can grow much larger than their guest disk size would suggest. If image file length is of concern (e.g. when storing qcow2 images directly on block devices), you should consider enabling this option. (since 8.1)
- overlap-check (Qcow2OverlapChecks, optional) -- which overlap checks to perform for writes to the image, defaults to 'cached' (since 2.2)
- cache-size (int, optional) -- the maximum total size of the L2 table and refcount block caches in bytes (since 2.2)
- l2-cache-size (int, optional) -- the maximum size of the L2 table cache in bytes (since 2.2)
- l2-cache-entry-size (int, optional) -- the size of each entry in the L2 cache in bytes. It must be a power of two between 512 and the cluster size. The default value is the cluster size (since 2.12)
- refcount-cache-size (int, optional) -- the maximum size of the refcount block cache in bytes (since 2.2)
- cache-clean-interval (int, optional) -- clean unused entries in the L2 and refcount caches. The interval is in seconds. The default value is 600 on supporting platforms, and 0 on other platforms. 0 disables this feature. (since 2.5)
- encrypt (BlockdevQcow2Encryption, optional) -- Image decryption options. Mandatory for encrypted images, except when doing a metadata-only probe of the image. (since 2.10)
- data-file (BlockdevRef, optional) -- reference to or definition of the external data file. This may only be specified for images that require an external data file. If it is not specified for such an image, the data file name is loaded from the image file. (since 4.0)
- The members of BlockdevOptionsGenericCOWFormat.
- none -- Don't check the host key at all
- hash -- Compare the host key with a given hash
- known_hosts -- Check the host key against the known_hosts file
- md5 -- The given hash is an md5 hash
- sha1 -- The given hash is an sha1 hash
- sha256 -- The given hash is an sha256 hash
- type (SshHostKeyCheckHashType) -- The hash algorithm used for the hash
- hash (string) -- The expected hash value
- mode (SshHostKeyCheckMode) -- How to check the host key
- When mode is hash: The members of SshHostKeyHash.
- server (InetSocketAddress) -- host address
- path (string) -- path to the image on the host
- user (string, optional) -- user as which to connect, defaults to current local user name
- host-key-check (SshHostKeyCheck, optional) -- Defines how and what to check the host key against (default: known_hosts)
- Enum BlkdebugEvent (Since: 2.9)
- Trigger events supported by blkdebug.
- l1_shrink_write_table -- write zeros to the l1 table to shrink image. (since 2.11)
- l1_shrink_free_l2_clusters -- discard the l2 tables. (since 2.11)
- cor_write -- a write due to copy-on-read (since 2.11)
- cluster_alloc_space -- an allocation of file space for a cluster (since 4.1)
- none -- triggers once at creation of the blkdebug node (since 4.1)
- l1_update -- Not documented
- l1_grow_alloc_table -- Not documented
- l1_grow_write_table -- Not documented
- l1_grow_activate_table -- Not documented
- l2_load -- Not documented
- l2_update -- Not documented
- l2_update_compressed -- Not documented
- l2_alloc_cow_read -- Not documented
- l2_alloc_write -- Not documented
- read_aio -- Not documented
- read_backing_aio -- Not documented
- read_compressed -- Not documented
- write_aio -- Not documented
- write_compressed -- Not documented
- vmstate_load -- Not documented
- vmstate_save -- Not documented
- cow_read -- Not documented
- cow_write -- Not documented
- reftable_load -- Not documented
- reftable_grow -- Not documented
- reftable_update -- Not documented
- refblock_load -- Not documented
- refblock_update -- Not documented
- refblock_update_part -- Not documented
- refblock_alloc -- Not documented
- refblock_alloc_hookup -- Not documented
- refblock_alloc_write -- Not documented
- refblock_alloc_write_blocks -- Not documented
- refblock_alloc_write_table -- Not documented
- refblock_alloc_switch_table -- Not documented
- cluster_alloc -- Not documented
- cluster_alloc_bytes -- Not documented
- cluster_free -- Not documented
- flush_to_os -- Not documented
- flush_to_disk -- Not documented
- pwritev_rmw_head -- Not documented
- pwritev_rmw_after_head -- Not documented
- pwritev_rmw_tail -- Not documented
- pwritev_rmw_after_tail -- Not documented
- pwritev -- Not documented
- pwritev_zero -- Not documented
- pwritev_done -- Not documented
- empty_image_prepare -- Not documented
- Enum BlkdebugIOType (Since: 4.1)
- Kinds of I/O that blkdebug can inject errors in.
- read -- .bdrv_co_preadv()
- write -- .bdrv_co_pwritev()
- write-zeroes -- .bdrv_co_pwrite_zeroes()
- discard -- .bdrv_co_pdiscard()
- flush -- .bdrv_co_flush_to_disk()
- block-status -- .bdrv_co_block_status()
- Object BlkdebugInjectErrorOptions (Since: 2.9)
- Describes a single error injection for blkdebug.
- event (BlkdebugEvent) -- trigger event
- state (int, optional) -- the state identifier blkdebug needs to be in to actually trigger the event; defaults to "any"
- iotype (BlkdebugIOType, optional) -- the type of I/O operations on which this error should be injected; defaults to "all read, write, write-zeroes, discard, and flush operations" (since: 4.1)
- errno (int, optional) -- error identifier (errno) to be returned; defaults to EIO
- sector (int, optional) -- specifies the sector index which has to be affected in order to actually trigger the event; defaults to "any sector"
- once (boolean, optional) -- disables further events after this one has been triggered; defaults to false
- immediately (boolean, optional) -- fail immediately; defaults to false
- Object BlkdebugSetStateOptions (Since: 2.9)
- Describes a single state-change event for blkdebug.
- event (BlkdebugEvent) -- trigger event
- state (int, optional) -- the current state identifier blkdebug needs to be in; defaults to "any"
- new_state (int) -- the state identifier blkdebug is supposed to assume if this event is triggered
- Object BlockdevOptionsBlkdebug (Since: 2.9)
- Driver specific block device options for blkdebug.
- image (BlockdevRef) -- underlying raw block device (or image file)
- config (string, optional) -- filename of the configuration file
- align (int, optional) -- required alignment for requests in bytes, must be positive power of 2, or 0 for default
- max-transfer (int, optional) -- maximum size for I/O transfers in bytes, must be positive multiple of align and of the underlying file's request alignment (but need not be a power of 2), or 0 for default (since 2.10)
- opt-write-zero (int, optional) -- preferred alignment for write zero requests in bytes, must be positive multiple of align and of the underlying file's request alignment (but need not be a power of 2), or 0 for default (since 2.10)
- max-write-zero (int, optional) -- maximum size for write zero requests in bytes, must be positive multiple of align, of opt-write-zero, and of the underlying file's request alignment (but need not be a power of 2), or 0 for default (since 2.10)
- opt-discard (int, optional) -- preferred alignment for discard requests in bytes, must be positive multiple of align and of the underlying file's request alignment (but need not be a power of 2), or 0 for default (since 2.10)
- max-discard (int, optional) -- maximum size for discard requests in bytes, must be positive multiple of align, of opt-discard, and of the underlying file's request alignment (but need not be a power of 2), or 0 for default (since 2.10)
- inject-error ([BlkdebugInjectErrorOptions], optional) -- array of error injection descriptions
- set-state ([BlkdebugSetStateOptions], optional) -- array of state-change descriptions
- take-child-perms ([BlockPermission], optional) -- Permissions to take on image in addition to what is necessary anyway (which depends on how the blkdebug node is used). Defaults to none. (since 5.0)
- unshare-child-perms ([BlockPermission], optional) -- Permissions not to share on image in addition to what cannot be shared anyway (which depends on how the blkdebug node is used). Defaults to none. (since 5.0)
- Object BlockdevOptionsBlklogwrites (Since: 3.0)
- Driver specific block device options for blklogwrites.
- file (BlockdevRef) -- block device
- log (BlockdevRef) -- block device used to log writes to file
- log-sector-size (int, optional) -- sector size used in logging writes to file, determines granularity of offsets and sizes of writes (default: 512)
- log-append (boolean, optional) -- append to an existing log (default: false)
- log-super-update-interval (int, optional) -- interval of write requests after which the log super block is updated to disk (default: 4096)
- Object BlockdevOptionsBlkverify (Since: 2.9)
- Driver specific block device options for blkverify.
- test (BlockdevRef) -- block device to be tested
- raw (BlockdevRef) -- raw image used for verification
- Object BlockdevOptionsBlkreplay (Since: 4.2)
- Driver specific block device options for blkreplay.
- Enum QuorumReadPattern (Since: 2.9)
- An enumeration of quorum read patterns.
- quorum -- read all the children and do a quorum vote on reads
- fifo -- read only from the first child that has not failed
- Object BlockdevOptionsQuorum (Since: 2.9)
- Driver specific block device options for Quorum
- blkverify (boolean, optional) -- true if the driver must print content mismatch set to false by default
- children ([BlockdevRef]) -- the children block devices to use
- vote-threshold (int) -- the vote limit under which a read will fail
- rewrite-corrupted (boolean, optional) -- rewrite corrupted data when quorum is reached (Since 2.1)
- read-pattern (QuorumReadPattern, optional) -- choose read pattern and set to quorum by default (Since 2.2)
- Object BlockdevOptionsGluster (Since: 2.9)
- Driver specific block device options for Gluster
- volume (string) -- name of gluster volume where VM image resides
- path (string) -- absolute path to image file in gluster volume
- server ([SocketAddress]) -- gluster servers description
- debug (int, optional) -- libgfapi log level (default '4' which is Error) (Since 2.8)
- logfile (string, optional) -- libgfapi log file (default /dev/stderr) (Since 2.8)
- Object BlockdevOptionsIoUring (Since: 7.2)
- Availability: CONFIG_BLKIO
Driver specific block device options for the io_uring backend.
- Object BlockdevOptionsNvmeIoUring (Since: 7.2)
- Availability: CONFIG_BLKIO
Driver specific block device options for the nvme-io_uring backend.
- Object BlockdevOptionsVirtioBlkVfioPci (Since: 7.2)
- Availability: CONFIG_BLKIO
Driver specific block device options for the virtio-blk-vfio-pci backend.
- path (string) -- path to the PCI device's sysfs directory (e.g. /sys/bus/pci/devices/0000:00:01.0).
- Object BlockdevOptionsVirtioBlkVhostUser (Since: 7.2)
- Availability: CONFIG_BLKIO
Driver specific block device options for the virtio-blk-vhost-user backend.
- Object BlockdevOptionsVirtioBlkVhostVdpa (Since: 7.2)
- Availability: CONFIG_BLKIO
Driver specific block device options for the virtio-blk-vhost-vdpa backend.
- path (string) -- path to the vhost-vdpa character device.
- fdset -- Member path supports the special "/dev/fdset/N" path (since 8.1)
- Enum IscsiTransport (Since: 2.9)
- An enumeration of libiscsi transport types
- Enum IscsiHeaderDigest (Since: 2.9)
- An enumeration of header digests supported by libiscsi
- crc32c -- Not documented
- none -- Not documented
- crc32c-none -- Not documented
- none-crc32c -- Not documented
- Object BlockdevOptionsIscsi (Since: 2.9)
- Driver specific block device options for iscsi
- transport (IscsiTransport) -- The iscsi transport type
- portal (string) -- The address of the iscsi portal
- target (string) -- The target iqn name
- lun (int, optional) -- LUN to connect to. Defaults to 0.
- user (string, optional) -- User name to log in with. If omitted, no CHAP authentication is performed.
- password-secret (string, optional) -- The ID of a QCryptoSecret object providing the password for the login. This option is required if user is specified.
- initiator-name (string, optional) -- The iqn name we want to identify to the target as. If this option is not specified, an initiator name is generated automatically.
- header-digest (IscsiHeaderDigest, optional) -- The desired header digest. Defaults to none-crc32c.
- timeout (int, optional) -- Timeout in seconds after which a request will timeout. 0 means no timeout and is the default.
- luks-any -- Used for opening either luks or luks2 (Since 8.0)
- luks -- Not documented
- luks2 -- Not documented
- key-secret (string) -- ID of a QCryptoSecret object providing a passphrase for unlocking the encryption
- cipher-alg (QCryptoCipherAlgo, optional) -- The encryption algorithm
- The members of RbdEncryptionOptionsLUKSBase.
- format (RbdImageEncryptionFormat) -- Encryption format.
- parent (RbdEncryptionOptions, optional) -- Parent image encryption options (for cloned images). Can be left unspecified if this cloned image is encrypted using the same format and secret as its parent image (i.e. not explicitly formatted) or if its parent image is not encrypted. (Since 8.0)
- When format is luks: The members of RbdEncryptionOptionsLUKS.
- When format is luks2: The members of RbdEncryptionOptionsLUKS2.
- When format is luks-any: The members of RbdEncryptionOptionsLUKSAny.
- format (RbdImageEncryptionFormat) -- Encryption format.
- When format is luks: The members of RbdEncryptionCreateOptionsLUKS.
- When format is luks2: The members of RbdEncryptionCreateOptionsLUKS2.
- pool (string) -- Ceph pool name.
- namespace (string, optional) -- Rados namespace name in the Ceph pool. (Since 5.0)
- image (string) -- Image name in the Ceph pool.
- conf (string, optional) -- path to Ceph configuration file. Values in the configuration file will be overridden by options specified via QAPI.
- snapshot (string, optional) -- Ceph snapshot name.
- encrypt (RbdEncryptionOptions, optional) -- Image encryption options. (Since 6.1)
- user (string, optional) -- Ceph id name.
- auth-client-required ([RbdAuthMode], optional) -- Acceptable authentication modes. This maps to Ceph configuration option "auth_client_required". (Since 3.0)
- key-secret (string, optional) -- ID of a QCryptoSecret object providing a key for cephx authentication. This maps to Ceph configuration option "key". (Since 3.0)
- server ([InetSocketAddressBase], optional) -- Monitor host address and port. This maps to the "mon_host" Ceph option.
- Enum ReplicationMode (Since: 2.9)
- Availability: CONFIG_REPLICATION
An enumeration of replication modes.
- primary -- Primary mode, the vm's state will be sent to secondary QEMU.
- secondary -- Secondary mode, receive the vm's state from primary QEMU.
- Object BlockdevOptionsReplication (Since: 2.9)
- Availability: CONFIG_REPLICATION
Driver specific block device options for replication
- mode (ReplicationMode) -- the replication mode
- top-id (string, optional) -- In secondary mode, node name or device ID of the root node who owns the replication node chain. Must not be given in primary mode.
- The members of BlockdevOptionsGenericFormat.
- Object NFSServer (Since: 2.9)
- Captures the address of the socket
- type (NFSTransport) -- transport type used for NFS (only TCP supported)
- host (string) -- host address for NFS server
- Object BlockdevOptionsNfs (Since: 2.9)
- Driver specific block device option for NFS
- server (NFSServer) -- host address
- path (string) -- path of the image on the host
- user (int, optional) -- UID value to use when talking to the server (defaults to 65534 on Windows and getuid() on unix)
- group (int, optional) -- GID value to use when talking to the server (defaults to 65534 on Windows and getgid() in unix)
- tcp-syn-count (int, optional) -- number of SYNs during the session establishment (defaults to libnfs default)
- readahead-size (int, optional) -- set the readahead size in bytes (defaults to libnfs default)
- page-cache-size (int, optional) -- set the pagecache size in bytes (defaults to libnfs default)
- debug (int, optional) -- set the NFS debug level (max 2) (defaults to libnfs default)
- Object BlockdevOptionsCurlBase (Since: 2.9)
- Driver specific block device options shared by all protocols supported by the curl backend.
- url (string) -- URL of the image file
- readahead (int, optional) -- Size of the read-ahead cache; must be a multiple of 512 (defaults to 256 kB)
- timeout (int, optional) -- Timeout for connections, in seconds (defaults to 5)
- username (string, optional) -- Username for authentication (defaults to none)
- password-secret (string, optional) -- ID of a QCryptoSecret object providing a password for authentication (defaults to no password)
- proxy-username (string, optional) -- Username for proxy authentication (defaults to none)
- proxy-password-secret (string, optional) -- ID of a QCryptoSecret object providing a password for proxy authentication (defaults to no password)
- Object BlockdevOptionsCurlHttp (Since: 2.9)
- Driver specific block device options for HTTP connections over the curl backend. URLs must start with "<http://>".
- cookie (string, optional) -- List of cookies to set; format is "name1=content1; name2=content2;" as explained by CURLOPT_COOKIE(3). Defaults to no cookies.
- cookie-secret (string, optional) -- ID of a QCryptoSecret object providing the cookie data in a secure way. See cookie for the format. (since 2.10)
- The members of BlockdevOptionsCurlBase.
- Object BlockdevOptionsCurlHttps (Since: 2.9)
- Driver specific block device options for HTTPS connections over the curl backend. URLs must start with "<https://>".
- cookie (string, optional) -- List of cookies to set; format is "name1=content1; name2=content2;" as explained by CURLOPT_COOKIE(3). Defaults to no cookies.
- sslverify (boolean, optional) -- Whether to verify the SSL certificate's validity (defaults to true)
- cookie-secret (string, optional) -- ID of a QCryptoSecret object providing the cookie data in a secure way. See cookie for the format. (since 2.10)
- The members of BlockdevOptionsCurlBase.
- Object BlockdevOptionsCurlFtp (Since: 2.9)
- Driver specific block device options for FTP connections over the curl backend. URLs must start with "<ftp://>".
- Object BlockdevOptionsCurlFtps (Since: 2.9)
- Driver specific block device options for FTPS connections over the curl backend. URLs must start with "ftps://".
- sslverify (boolean, optional) -- Whether to verify the SSL certificate's validity (defaults to true)
- The members of BlockdevOptionsCurlBase.
- Object BlockdevOptionsNbd (Since: 2.9)
- Driver specific block device options for NBD.
- server (SocketAddress) -- NBD server address
- export (string, optional) -- export name
- tls-creds (string, optional) -- TLS credentials ID
- tls-hostname (string, optional) -- TLS hostname override for certificate validation (Since 7.0)
- x-dirty-bitmap (string, optional) -- A metadata context name such as "qemu:dirty-bitmap:NAME" or "qemu:allocation-depth" to query in place of the traditional "base:allocation" block status (see NBD_OPT_LIST_META_CONTEXT in the NBD protocol; and yes, naming this option x-context would have made more sense) (since 3.0)
- reconnect-delay (int, optional) -- On an unexpected disconnect, the nbd client tries to connect again until succeeding or encountering a serious error. During the first reconnect-delay seconds, all requests are paused and will be rerun on a successful reconnect. After that time, any delayed requests and all future requests before a successful reconnect will immediately fail. Default 0 (Since 4.2)
- open-timeout (int, optional) -- In seconds. If zero, the nbd driver tries the connection only once, and fails to open if the connection fails. If non-zero, the nbd driver will repeat connection attempts until successful or until open-timeout seconds have elapsed. Default 0 (Since 7.0)
- unstable -- Member x-dirty-bitmap is experimental.
- Object BlockdevOptionsRaw (Since: 2.9)
- Driver specific block device options for the raw driver.
- offset (int, optional) -- position where the block device starts
- size (int, optional) -- the assumed size of the device
- The members of BlockdevOptionsGenericFormat.
- Object BlockdevOptionsThrottle (Since: 2.11)
- Driver specific block device options for the throttle driver
- throttle-group (string) -- the name of the throttle-group object to use. It must already exist.
- file (BlockdevRef) -- reference to or definition of the data source block device
- Object BlockdevOptionsCor (Since: 6.0)
- Driver specific block device options for the copy-on-read driver.
- bottom (string, optional) -- The name of a non-filter node (allocation-bearing layer) that limits the COR operations in the backing chain (inclusive), so that no data below this node will be copied by this filter. If option is absent, the limit is not applied, so that data from all backing layers may be copied.
- The members of BlockdevOptionsGenericFormat.
- Enum OnCbwError (Since: 7.1)
- An enumeration of possible behaviors for copy-before-write operation failures.
- break-guest-write -- report the error to the guest. This way, the guest will not be able to overwrite areas that cannot be backed up, so the backup process remains valid.
- break-snapshot -- continue guest write. Doing so will make the provided snapshot state invalid and any backup or export process based on it will finally fail.
- Object BlockdevOptionsCbw (Since: 6.2)
- Driver specific block device options for the copy-before-write driver, which does so called copy-before-write operations: when data is written to the filter, the filter first reads corresponding blocks from its file child and copies them to target child. After successfully copying, the write request is propagated to file child. If copying fails, the original write request is failed too and no data is written to file child.
- target (BlockdevRef) -- The target for copy-before-write operations.
- bitmap (BlockDirtyBitmap, optional) -- If specified, copy-before-write filter will do copy-before-write operations only for dirty regions of the bitmap. Bitmap size must be equal to length of file and target child of the filter. Note also, that bitmap is used only to initialize internal bitmap of the process, so further modifications (or removing) of specified bitmap doesn't influence the filter. (Since 7.0)
- on-cbw-error (OnCbwError, optional) -- Behavior on failure of copy-before-write operation. Default is break-guest-write. (Since 7.1)
- cbw-timeout (int, optional) -- Zero means no limit. Non-zero sets the timeout in seconds for copy-before-write operation. When a timeout occurs, the respective copy-before-write operation will fail, and the on-cbw-error parameter will decide how this failure is handled. Default 0. (Since 7.1)
- min-cluster-size (int, optional) -- Minimum size of blocks used by copy-before-write operations. Has to be a power of 2. No effect if smaller than the maximum of the target's cluster size and 64 KiB. Default 0. (Since 9.2)
- The members of BlockdevOptionsGenericFormat.
- Object BlockdevOptions (Since: 2.9)
- Options for creating a block device. Many options are available for all block devices, independent of the block driver:
- driver (BlockdevDriver) -- block driver name
- node-name (string, optional) -- the node name of the new node. This option is required on the top level of blockdev-add. Valid node names start with an alphabetic character and may contain only alphanumeric characters, '-', '.' and '_'. Their maximum length is 31 characters. (Since 2.0)
- discard (BlockdevDiscardOptions, optional) -- discard-related options (default: ignore)
- cache (BlockdevCacheOptions, optional) -- cache-related options
- active (boolean, optional) -- whether the block node should be activated (default: true). Having inactive block nodes is useful primarily for migration because it allows opening an image on the destination while the source is still holding locks for it. (Since 10.0)
- read-only (boolean, optional) -- whether the block device should be read-only (default: false). Note that some block drivers support only read-only access, either generally or in certain configurations. In this case, the default value does not work and the option must be specified explicitly.
- auto-read-only (boolean, optional) -- if true and read-only is false, QEMU may automatically decide not to open the image read-write as requested, but fall back to read-only instead (and switch between the modes later), e.g. depending on whether the image file is writable or whether a writing user is attached to the node (default: false, since 3.1)
- detect-zeroes (BlockdevDetectZeroesOptions, optional) -- detect and optimize zero writes (Since 2.1) (default: off)
- force-share (boolean, optional) -- force share all permission on added nodes. Requires read-only=true. (Since 2.10)
- When driver is blkdebug: The members of BlockdevOptionsBlkdebug.
- When driver is blklogwrites: The members of BlockdevOptionsBlklogwrites.
- When driver is blkverify: The members of BlockdevOptionsBlkverify.
- When driver is blkreplay: The members of BlockdevOptionsBlkreplay.
- When driver is bochs: The members of BlockdevOptionsGenericFormat.
- When driver is cloop: The members of BlockdevOptionsGenericFormat.
- When driver is compress: The members of BlockdevOptionsGenericFormat.
- When driver is copy-before-write: The members of BlockdevOptionsCbw.
- When driver is copy-on-read: The members of BlockdevOptionsCor.
- When driver is dmg: The members of BlockdevOptionsGenericFormat.
- When driver is file: The members of BlockdevOptionsFile.
- When driver is ftp: The members of BlockdevOptionsCurlFtp.
- When driver is ftps: The members of BlockdevOptionsCurlFtps.
- When driver is gluster: The members of BlockdevOptionsGluster.
- When driver is host_cdrom: The members of BlockdevOptionsFile.
- When driver is host_device: The members of BlockdevOptionsFile.
- When driver is http: The members of BlockdevOptionsCurlHttp.
- When driver is https: The members of BlockdevOptionsCurlHttps.
- When driver is io_uring: The members of BlockdevOptionsIoUring.
- When driver is iscsi: The members of BlockdevOptionsIscsi.
- When driver is luks: The members of BlockdevOptionsLUKS.
- When driver is nbd: The members of BlockdevOptionsNbd.
- When driver is nfs: The members of BlockdevOptionsNfs.
- When driver is null-aio: The members of BlockdevOptionsNull.
- When driver is null-co: The members of BlockdevOptionsNull.
- When driver is nvme: The members of BlockdevOptionsNVMe.
- When driver is nvme-io_uring: The members of BlockdevOptionsNvmeIoUring.
- When driver is parallels: The members of BlockdevOptionsGenericFormat.
- When driver is preallocate: The members of BlockdevOptionsPreallocate.
- When driver is qcow2: The members of BlockdevOptionsQcow2.
- When driver is qcow: The members of BlockdevOptionsQcow.
- When driver is qed: The members of BlockdevOptionsGenericCOWFormat.
- When driver is quorum: The members of BlockdevOptionsQuorum.
- When driver is raw: The members of BlockdevOptionsRaw.
- When driver is rbd: The members of BlockdevOptionsRbd.
- When driver is replication: The members of BlockdevOptionsReplication.
- When driver is snapshot-access: The members of BlockdevOptionsGenericFormat.
- When driver is ssh: The members of BlockdevOptionsSsh.
- When driver is throttle: The members of BlockdevOptionsThrottle.
- When driver is vdi: The members of BlockdevOptionsGenericFormat.
- When driver is vhdx: The members of BlockdevOptionsGenericFormat.
- When driver is virtio-blk-vfio-pci: The members of BlockdevOptionsVirtioBlkVfioPci.
- When driver is virtio-blk-vhost-user: The members of BlockdevOptionsVirtioBlkVhostUser.
- When driver is virtio-blk-vhost-vdpa: The members of BlockdevOptionsVirtioBlkVhostVdpa.
- When driver is vmdk: The members of BlockdevOptionsGenericCOWFormat.
- When driver is vpc: The members of BlockdevOptionsGenericFormat.
- When driver is vvfat: The members of BlockdevOptionsVVFAT.
- Alternate BlockdevRef (Since: 2.9)
- Reference to a block device.
- definition (BlockdevOptions) -- defines a new block device inline
- reference (string) -- references the ID of an existing block device
- Alternate BlockdevRefOrNull (Since: 2.9)
- Reference to a block device.
- definition (BlockdevOptions) -- defines a new block device inline
- reference (string) -- references the ID of an existing block device. An empty string means that no block device should be referenced. Deprecated; use null instead.
- null (null) -- No block device should be referenced (since 2.10)
- Command blockdev-add (Since: 2.9)
- Creates a new block device.
-> { "execute": "blockdev-add",
"arguments": {
"driver": "qcow2",
"node-name": "test1",
"file": {
"driver": "file",
"filename": "test.qcow2"
}
}
}
<- { "return": {} }
-> { "execute": "blockdev-add",
"arguments": {
"driver": "qcow2",
"node-name": "node0",
"discard": "unmap",
"cache": {
"direct": true
},
"file": {
"driver": "file",
"filename": "/tmp/test.qcow2"
},
"backing": {
"driver": "raw",
"file": {
"driver": "file",
"filename": "/dev/fdset/4"
}
}
}
}
<- { "return": {} }
- Command blockdev-reopen (Since: 6.1)
- Reopens one or more block devices using the given set of options. Any
option not specified will be reset to its default value regardless of its
previous status. If an option cannot be changed or a particular driver
does not support reopening then the command will return an error. All
devices in the list are reopened in one transaction, so if one of them
fails then the whole transaction is cancelled.
The command receives a list of block devices to reopen. For each one of them, the top-level node-name option (from BlockdevOptions) must be specified and is used to select the block device to be reopened. Other node-name options must be either omitted or set to the current name of the appropriate node. This command won't change any node name and any attempt to do it will result in an error.
In the case of options that refer to child nodes, the behavior of this command depends on the value:
- 1.
- A set of options (BlockdevOptions): the child is reopened with the specified set of options.
- 2.
- A reference to the current child: the child is reopened using its existing set of options.
- 3.
- A reference to a different node: the current child is replaced with the specified one.
- 4.
- null: the current child (if any) is detached.
Options (1) and (2) are supported in all cases. Option (3) is supported for file and backing, and option (4) for backing only.
Unlike with blockdev-add, the backing option must always be present unless the node being reopened does not have a backing file and its image does not have a default backing file name as part of its metadata.
- Command blockdev-del (Since: 2.9)
- Deletes a block device that has been added using blockdev-add. The command will fail if the node is attached to a device or is otherwise being used.
-> { "execute": "blockdev-add",
"arguments": {
"driver": "qcow2",
"node-name": "node0",
"file": {
"driver": "file",
"filename": "test.qcow2"
}
}
}
<- { "return": {} }
-> { "execute": "blockdev-del",
"arguments": { "node-name": "node0" }
}
<- { "return": {} }
- Command blockdev-set-active (Since: 10.0)
- Activate or inactivate a block device. Use this to manage the handover of
block devices on migration with qemu-storage-daemon.
Activating a node automatically activates all of its child nodes first. Inactivating a node automatically inactivates any of its child nodes that are not in use by a still active node.
- node-name (string, optional) -- Name of the graph node to activate or inactivate. By default, all nodes are affected by the operation.
- active (boolean) -- true if the nodes should be active when the command returns success, false if they should be inactive.
-> { "execute": "blockdev-set-active",
"arguments": {
"node-name": "node0",
"active": false
}
}
<- { "return": {} }
- Object BlockdevCreateOptionsFile (Since: 2.12)
- Driver specific image creation options for file.
- filename (string) -- Filename for the new image file
- size (int) -- Size of the virtual disk in bytes
- preallocation (PreallocMode, optional) -- Preallocation mode for the new image (default: off; allowed values: off, falloc (if CONFIG_POSIX_FALLOCATE), full (if CONFIG_POSIX))
- nocow (boolean, optional) -- Turn off copy-on-write (valid only on btrfs; default: off)
- extent-size-hint (int, optional) -- Extent size hint to add to the image file; 0 for not adding an extent size hint (default: 1 MB, since 5.1)
- Object BlockdevCreateOptionsGluster (Since: 2.12)
- Driver specific image creation options for gluster.
- location (BlockdevOptionsGluster) -- Where to store the new image file
- size (int) -- Size of the virtual disk in bytes
- preallocation (PreallocMode, optional) -- Preallocation mode for the new image (default: off; allowed values: off, falloc (if CONFIG_GLUSTERFS_FALLOCATE), full (if CONFIG_GLUSTERFS_ZEROFILL))
- Object BlockdevCreateOptionsLUKS (Since: 2.12)
- Driver specific image creation options for LUKS.
- file (BlockdevRef, optional) -- Node to create the image format on, mandatory except when 'preallocation' is not requested
- header (BlockdevRef, optional) -- Block device holding a detached LUKS header. (since 9.0)
- size (int) -- Size of the virtual disk in bytes
- preallocation (PreallocMode, optional) -- Preallocation mode for the new image (since: 4.2) (default: off; allowed values: off, metadata, falloc, full)
- The members of QCryptoBlockCreateOptionsLUKS.
- Object BlockdevCreateOptionsNfs (Since: 2.12)
- Driver specific image creation options for NFS.
- location (BlockdevOptionsNfs) -- Where to store the new image file
- size (int) -- Size of the virtual disk in bytes
- Object BlockdevCreateOptionsParallels (Since: 2.12)
- Driver specific image creation options for parallels.
- file (BlockdevRef) -- Node to create the image format on
- size (int) -- Size of the virtual disk in bytes
- cluster-size (int, optional) -- Cluster size in bytes (default: 1 MB)
- Object BlockdevCreateOptionsQcow (Since: 2.12)
- Driver specific image creation options for qcow.
- file (BlockdevRef) -- Node to create the image format on
- size (int) -- Size of the virtual disk in bytes
- backing-file (string, optional) -- File name of the backing file if a backing file should be used
- encrypt (QCryptoBlockCreateOptions, optional) -- Encryption options if the image should be encrypted
- v2 -- The original QCOW2 format as introduced in QEMU 0.10 (version 2)
- v3 -- The extended QCOW2 format as introduced in QEMU 1.1 (version 3)
- Enum Qcow2CompressionType (Since: 5.1)
- Compression type used in qcow2 image file
- zlib -- zlib compression, see <<http://zlib.net/>>
- zstd -- zstd compression, see <<http://github.com/facebook/zstd>>
- Object BlockdevCreateOptionsQcow2 (Since: 2.12)
- Driver specific image creation options for qcow2.
- file (BlockdevRef) -- Node to create the image format on
- data-file (BlockdevRef, optional) -- Node to use as an external data file in which all guest data is stored so that only metadata remains in the qcow2 file (since: 4.0)
- data-file-raw (boolean, optional) -- True if the external data file must stay valid as a standalone (read-only) raw image without looking at qcow2 metadata (default: false; since: 4.0)
- extended-l2 (boolean, optional) -- True to make the image have extended L2 entries (default: false; since 5.2)
- size (int) -- Size of the virtual disk in bytes
- version (BlockdevQcow2Version, optional) -- Compatibility level (default: v3)
- backing-file (string, optional) -- File name of the backing file if a backing file should be used
- backing-fmt (BlockdevDriver, optional) -- Name of the block driver to use for the backing file
- encrypt (QCryptoBlockCreateOptions, optional) -- Encryption options if the image should be encrypted
- cluster-size (int, optional) -- qcow2 cluster size in bytes (default: 65536)
- preallocation (PreallocMode, optional) -- Preallocation mode for the new image (default: off; allowed values: off, falloc, full, metadata)
- lazy-refcounts (boolean, optional) -- True if refcounts may be updated lazily (default: off)
- refcount-bits (int, optional) -- Width of reference counts in bits (default: 16)
- compression-type (Qcow2CompressionType, optional) -- The image cluster compression method (default: zlib, since 5.1)
- Object BlockdevCreateOptionsQed (Since: 2.12)
- Driver specific image creation options for qed.
- file (BlockdevRef) -- Node to create the image format on
- size (int) -- Size of the virtual disk in bytes
- backing-file (string, optional) -- File name of the backing file if a backing file should be used
- backing-fmt (BlockdevDriver, optional) -- Name of the block driver to use for the backing file
- cluster-size (int, optional) -- Cluster size in bytes (default: 65536)
- table-size (int, optional) -- L1/L2 table size (in clusters)
- Object BlockdevCreateOptionsRbd (Since: 2.12)
- Driver specific image creation options for rbd/Ceph.
- location (BlockdevOptionsRbd) -- Where to store the new image file. This location cannot point to a snapshot.
- size (int) -- Size of the virtual disk in bytes
- cluster-size (int, optional) -- RBD object size
- encrypt (RbdEncryptionCreateOptions, optional) -- Image encryption options. (Since 6.1)
- Enum BlockdevVmdkSubformat (Since: 4.0)
- Subformat options for VMDK images
- monolithicSparse -- Single file image with sparse cluster allocation
- monolithicFlat -- Single flat data image and a descriptor file
- twoGbMaxExtentSparse -- Data is split into 2GB (per virtual LBA) sparse extent files, in addition to a descriptor file
- twoGbMaxExtentFlat -- Data is split into 2GB (per virtual LBA) flat extent files, in addition to a descriptor file
- streamOptimized -- Single file image sparse cluster allocation, optimized for streaming over network.
- Enum BlockdevVmdkAdapterType (Since: 4.0)
- Adapter type info for VMDK images
- ide -- Not documented
- buslogic -- Not documented
- lsilogic -- Not documented
- legacyESX -- Not documented
- Object BlockdevCreateOptionsVmdk (Since: 4.0)
- Driver specific image creation options for VMDK.
- file (BlockdevRef) -- Where to store the new image file. This refers to the image file for monolithcSparse and streamOptimized format, or the descriptor file for other formats.
- size (int) -- Size of the virtual disk in bytes
- extents ([BlockdevRef], optional) -- Where to store the data extents. Required for monolithcFlat, twoGbMaxExtentSparse and twoGbMaxExtentFlat formats. For monolithicFlat, only one entry is required; for twoGbMaxExtent* formats, the number of entries required is calculated as extent_number = virtual_size / 2GB. Providing more extents than will be used is an error.
- subformat (BlockdevVmdkSubformat, optional) -- The subformat of the VMDK image. Default: "monolithicSparse".
- backing-file (string, optional) -- The path of backing file. Default: no backing file is used.
- adapter-type (BlockdevVmdkAdapterType, optional) -- The adapter type used to fill in the descriptor. Default: ide.
- hwversion (string, optional) -- Hardware version. The meaningful options are "4" or "6". Default: "4".
- toolsversion (string, optional) -- VMware guest tools version. Default: "2147483647" (Since 6.2)
- zeroed-grain (boolean, optional) -- Whether to enable zeroed-grain feature for sparse subformats. Default: false.
- Object BlockdevCreateOptionsSsh (Since: 2.12)
- Driver specific image creation options for SSH.
- location (BlockdevOptionsSsh) -- Where to store the new image file
- size (int) -- Size of the virtual disk in bytes
- Object BlockdevCreateOptionsVdi (Since: 2.12)
- Driver specific image creation options for VDI.
- file (BlockdevRef) -- Node to create the image format on
- size (int) -- Size of the virtual disk in bytes
- preallocation (PreallocMode, optional) -- Preallocation mode for the new image (default: off; allowed values: off, metadata)
- Object BlockdevCreateOptionsVhdx (Since: 2.12)
- Driver specific image creation options for vhdx.
- file (BlockdevRef) -- Node to create the image format on
- size (int) -- Size of the virtual disk in bytes
- log-size (int, optional) -- Log size in bytes, must be a multiple of 1 MB (default: 1 MB)
- block-size (int, optional) -- Block size in bytes, must be a multiple of 1 MB and not larger than 256 MB (default: automatically choose a block size depending on the image size)
- subformat (BlockdevVhdxSubformat, optional) -- vhdx subformat (default: dynamic)
- block-state-zero (boolean, optional) -- Force use of payload blocks of type 'ZERO'. Non-standard, but default. Do not set to 'off' when using 'qemu-img convert' with subformat=dynamic.
- Object BlockdevCreateOptionsVpc (Since: 2.12)
- Driver specific image creation options for vpc (VHD).
- file (BlockdevRef) -- Node to create the image format on
- size (int) -- Size of the virtual disk in bytes
- subformat (BlockdevVpcSubformat, optional) -- vhdx subformat (default: dynamic)
- force-size (boolean, optional) -- Force use of the exact byte size instead of rounding to the next size that can be represented in CHS geometry (default: false)
- Object BlockdevCreateOptions (Since: 2.12)
- Options for creating an image format on a given node.
- driver (BlockdevDriver) -- block driver to create the image format
- When driver is file: The members of BlockdevCreateOptionsFile.
- When driver is gluster: The members of BlockdevCreateOptionsGluster.
- When driver is luks: The members of BlockdevCreateOptionsLUKS.
- When driver is nfs: The members of BlockdevCreateOptionsNfs.
- When driver is parallels: The members of BlockdevCreateOptionsParallels.
- When driver is qcow: The members of BlockdevCreateOptionsQcow.
- When driver is qcow2: The members of BlockdevCreateOptionsQcow2.
- When driver is qed: The members of BlockdevCreateOptionsQed.
- When driver is rbd: The members of BlockdevCreateOptionsRbd.
- When driver is ssh: The members of BlockdevCreateOptionsSsh.
- When driver is vdi: The members of BlockdevCreateOptionsVdi.
- When driver is vhdx: The members of BlockdevCreateOptionsVhdx.
- When driver is vmdk: The members of BlockdevCreateOptionsVmdk.
- When driver is vpc: The members of BlockdevCreateOptionsVpc.
- Command blockdev-create (Since: 3.0)
- Starts a job to create an image format on a given node. The job is automatically finalized, but a manual job-dismiss is required.
- job-id (string) -- Identifier for the newly created job.
- options (BlockdevCreateOptions) -- Options for the image creation.
- Object BlockdevAmendOptionsLUKS (Since: 5.1)
- Driver specific image amend options for LUKS.
- Object BlockdevAmendOptionsQcow2 (Since: 5.1)
- Driver specific image amend options for qcow2. For now, only encryption options can be amended
- Object BlockdevAmendOptions (Since: 5.1)
- Options for amending an image format
- driver (BlockdevDriver) -- Block driver of the node to amend.
- When driver is luks: The members of BlockdevAmendOptionsLUKS.
- When driver is qcow2: The members of BlockdevAmendOptionsQcow2.
- Command x-blockdev-amend (Since: 5.1)
- This command is unstable/experimental.
Starts a job to amend format specific options of an existing open block device. The job is automatically finalized, but a manual job-dismiss is required.
- job-id (string) -- Identifier for the newly created job.
- node-name (string) -- Name of the block node to work on
- options (BlockdevAmendOptions) -- Options (driver specific)
- force (boolean, optional) -- Allow unsafe operations, format specific. For luks that allows erase of the last active keyslot (permanent loss of data), and replacement of an active keyslot (possible loss of data if IO error happens)
- unstable -- This command is experimental.
- Enum BlockErrorAction (Since: 2.1)
- An enumeration of action that has been taken when a DISK I/O occurs
- ignore -- error has been ignored
- report -- error has been reported to the device
- stop -- error caused VM to be stopped
- Event BLOCK_IMAGE_CORRUPTED (Since: 1.7)
- Emitted when a disk image is being marked corrupt. The image can be identified by its device or node name. The 'device' field is always present for compatibility reasons, but it can be empty ("") if the image does not have a device name associated.
- device (string) -- device name. This is always present for compatibility reasons, but it can be empty ("") if the image does not have a device name associated.
- node-name (string, optional) -- node name (Since: 2.4)
- msg (string) -- informative message for human consumption, such as the kind of corruption being detected. It should not be parsed by machine as it is not guaranteed to be stable
- offset (int, optional) -- if the corruption resulted from an image access, this is the host's access offset into the image
- size (int, optional) -- if the corruption resulted from an image access, this is the access size
- fatal (boolean) -- if set, the image is marked corrupt and therefore unusable after this event and must be repaired (Since 2.2; before, every BLOCK_IMAGE_CORRUPTED event was fatal)
Note:
If action is "stop", a STOP
<#event-QMP-run-state.STOP> event will eventually follow the
BLOCK_IO_ERROR event.
<- { "event": "BLOCK_IMAGE_CORRUPTED",
"data": { "device": "", "node-name": "drive", "fatal": false,
"msg": "L2 table offset 0x2a2a2a00 unaligned (L1 index: 0)" },
"timestamp": { "seconds": 1648243240, "microseconds": 906060 } }
- Event BLOCK_IO_ERROR (Since: 0.13)
- Emitted when a disk I/O error occurs
- qom-path (string) -- path to the device object in the QOM tree (since 9.2)
- device (string) -- device name. This is always present for compatibility reasons, but it can be empty ("") if the image does not have a device name associated.
- node-name (string, optional) -- node name. Note that errors may be reported for the root node that is directly attached to a guest device rather than for the node where the error occurred. The node name is not present if the drive is empty. (Since: 2.8)
- operation (IoOperationType) -- I/O operation
- action (BlockErrorAction) -- action that has been taken
- nospace (boolean, optional) -- true if I/O error was caused due to a no-space condition. This key is only present if query-block's io-status is present, please see query-block documentation for more information (since: 2.2)
- reason (string) -- human readable string describing the error cause. (This field is a debugging aid for humans, it should not be parsed by applications) (since: 2.2)
Note:
If action is "stop", a STOP
<#event-QMP-run-state.STOP> event will eventually follow the
BLOCK_IO_ERROR event.
Note:
This event is rate-limited.
<- { "event": "BLOCK_IO_ERROR",
"data": { "qom-path": "/machine/unattached/device[0]",
"device": "ide0-hd1",
"node-name": "#block212",
"operation": "write",
"action": "stop",
"reason": "No space left on device" },
"timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
- Event BLOCK_JOB_COMPLETED (Since: 1.1)
- Emitted when a block job has completed
- type (JobType) -- job type
- device (string) -- The job identifier. Originally the device name but other values are allowed since QEMU 2.7
- len (int) -- maximum progress value
- offset (int) -- current progress value. On success this is equal to len. On failure this is less than len
- speed (int) -- rate limit, bytes per second
- error (string, optional) -- error message. Only present on failure. This field contains a human-readable error message. There are no semantics other than that streaming has failed and clients should not try to interpret the error string
<- { "event": "BLOCK_JOB_COMPLETED",
"data": { "type": "stream", "device": "virtio-disk0",
"len": 10737418240, "offset": 10737418240,
"speed": 0 },
"timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
- Event BLOCK_JOB_CANCELLED (Since: 1.1)
- Emitted when a block job has been cancelled
- type (JobType) -- job type
- device (string) -- The job identifier. Originally the device name but other values are allowed since QEMU 2.7
- len (int) -- maximum progress value
- offset (int) -- current progress value. On success this is equal to len. On failure this is less than len
- speed (int) -- rate limit, bytes per second
<- { "event": "BLOCK_JOB_CANCELLED",
"data": { "type": "stream", "device": "virtio-disk0",
"len": 10737418240, "offset": 134217728,
"speed": 0 },
"timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
- Event BLOCK_JOB_ERROR (Since: 1.3)
- Emitted when a block job encounters an error
- device (string) -- The job identifier. Originally the device name but other values are allowed since QEMU 2.7
- operation (IoOperationType) -- I/O operation
- action (BlockErrorAction) -- action that has been taken
<- { "event": "BLOCK_JOB_ERROR",
"data": { "device": "ide0-hd1",
"operation": "write",
"action": "stop" },
"timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
- Event BLOCK_JOB_READY (Since: 1.3)
- Emitted when a block job is ready to complete
- type (JobType) -- job type
- device (string) -- The job identifier. Originally the device name but other values are allowed since QEMU 2.7
- len (int) -- maximum progress value
- offset (int) -- current progress value. On success this is equal to len. On failure this is less than len
- speed (int) -- rate limit, bytes per second
Note:
The "ready to complete" status is always reset
by a BLOCK_JOB_ERROR event.
<- { "event": "BLOCK_JOB_READY",
"data": { "device": "drive0", "type": "mirror", "speed": 0,
"len": 2097152, "offset": 2097152 },
"timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
- Event BLOCK_JOB_PENDING (Since: 2.12)
- Emitted when a block job is awaiting explicit authorization to finalize graph changes via job-finalize. If this job is part of a transaction, it will not emit this event until the transaction has converged first.
<- { "event": "BLOCK_JOB_PENDING",
"data": { "type": "mirror", "id": "backup_1" },
"timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
- Enum PreallocMode (Since: 2.2)
- Preallocation mode of QEMU image file
- off -- no preallocation
- metadata -- preallocate only for metadata
- falloc -- like full preallocation but allocate disk space by posix_fallocate() rather than writing data.
- full -- preallocate all data by writing it to the device to ensure disk space is really available. This data may or may not be zero, depending on the image format and storage. full preallocation also sets up metadata correctly.
- Event BLOCK_WRITE_THRESHOLD (Since: 2.3)
- Emitted when writes on block device reaches or exceeds the configured write threshold. For thin-provisioned devices, this means the device should be extended to avoid pausing for disk exhaustion. The event is one shot. Once triggered, it needs to be re-registered with another block-set-write-threshold command.
- node-name (string) -- graph node name on which the threshold was exceeded.
- amount-exceeded (int) -- amount of data which exceeded the threshold, in bytes.
- write-threshold (int) -- last configured threshold, in bytes.
- Command block-set-write-threshold (Since: 2.3)
- Change the write threshold for a block drive. An event will be delivered
if a write to this block drive crosses the configured threshold. The
threshold is an offset, thus must be non-negative. Default is no write
threshold. Setting the threshold to zero disables it.
This is useful to transparently resize thin-provisioned drives without the guest OS noticing.
- node-name (string) -- graph node name on which the threshold must be set.
- write-threshold (int) -- configured threshold for the block device, bytes. Use 0 to disable the threshold.
-> { "execute": "block-set-write-threshold",
"arguments": { "node-name": "mydev",
"write-threshold": 17179869184 } }
<- { "return": {} }
- Command x-blockdev-change (Since: 2.7)
- This command is unstable/experimental.
Dynamically reconfigure the block driver state graph.
Currently only supports adding and deleting quorum children. A child will be added at the end of the list of children. Its contents must be consistent with the other childrens' contents. Deleting a child that is not last in the list of children is problematic, because it "renumbers" the children following it.
- parent (string) -- the id or name of the parent node.
- child (string, optional) -- the name of a child to be deleted. Mutually exclusive with node.
- node (string, optional) -- the name of the node to be added. Mutually exclusive with child.
- unstable -- This command is experimental.
- Example: Add a new node to a quorum
-> { "execute": "blockdev-add",
"arguments": {
"driver": "raw",
"node-name": "new_node",
"file": { "driver": "file",
"filename": "test.raw" } } }
<- { "return": {} }
-> { "execute": "x-blockdev-change",
"arguments": { "parent": "disk1",
"node": "new_node" } }
<- { "return": {} }
- Example: Delete a quorum's node
-> { "execute": "x-blockdev-change",
"arguments": { "parent": "disk1",
"child": "children.1" } }
<- { "return": {} }
- Command x-blockdev-set-iothread (Since: 2.12)
- This command is unstable/experimental.
Move node and its children into the iothread. If iothread is null then move node and its children into the main loop.
The node must not be attached to a BlockBackend.
- node-name (string) -- the name of the block driver node
- iothread (StrOrNull) -- the name of the IOThread object or null for the main loop
- force (boolean, optional) -- true if the node and its children should be moved when a BlockBackend is already attached
- unstable -- This command is experimental and intended for test cases that need control over IOThreads only.
- Example: Move a node into an IOThread
-> { "execute": "x-blockdev-set-iothread",
"arguments": { "node-name": "disk1",
"iothread": "iothread0" } }
<- { "return": {} }
- Example: Move a node into the main loop
-> { "execute": "x-blockdev-set-iothread",
"arguments": { "node-name": "disk1",
"iothread": null } }
<- { "return": {} }
- Enum QuorumOpType (Since: 2.6)
- An enumeration of the quorum operation types
- Event QUORUM_FAILURE (Since: 2.0)
- Emitted by the Quorum block driver if it fails to establish a quorum
- reference (string) -- device name if defined else node name
- sector-num (int) -- number of the first sector of the failed read operation
- sectors-count (int) -- failed read operation sector count
Note:
This event is rate-limited.
<- { "event": "QUORUM_FAILURE",
"data": { "reference": "usr1", "sector-num": 345435, "sectors-count": 5 },
"timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
- Event QUORUM_REPORT_BAD (Since: 2.0)
- Emitted to report a corruption of a Quorum file
- type (QuorumOpType) -- quorum operation type (Since 2.6)
- error (string, optional) -- error message. Only present on failure. This field contains a human-readable error message. There are no semantics other than that the block layer reported an error and clients should not try to interpret the error string.
- node-name (string) -- the graph node name of the block driver state
- sector-num (int) -- number of the first sector of the failed read operation
- sectors-count (int) -- failed read operation sector count
Note:
This event is rate-limited.
- Example: Read operation
<- { "event": "QUORUM_REPORT_BAD",
"data": { "node-name": "node0", "sector-num": 345435, "sectors-count": 5,
"type": "read" },
"timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
- Example: Flush operation
<- { "event": "QUORUM_REPORT_BAD",
"data": { "node-name": "node0", "sector-num": 0, "sectors-count": 2097120,
"type": "flush", "error": "Broken pipe" },
"timestamp": { "seconds": 1456406829, "microseconds": 291763 } }
- device (string) -- the device name or node-name of a root node to generate the snapshot from
- name (string) -- the name of the internal snapshot to be created
- Command blockdev-snapshot-internal-sync (Since: 1.7)
- Synchronously take an internal snapshot of a block device, when the format of the image used supports it. If the name is an empty string, or a snapshot with name already exists, the operation will fail.
- The members of BlockdevSnapshotInternal.
- If device is not a valid block device, GenericError
- If any snapshot matching name exists, or name is empty, GenericError
- If the format of the image used does not support it, GenericError
Note:
Only some image formats such as qcow2 and rbd support
internal snapshots.
-> { "execute": "blockdev-snapshot-internal-sync",
"arguments": { "device": "ide-hd0",
"name": "snapshot0" }
}
<- { "return": {} }
- Command blockdev-snapshot-delete-internal-sync (Since: 1.7)
- Synchronously delete an internal snapshot of a block device, when the format of the image used support it. The snapshot is identified by name or id or both. One of the name or id is required. Return SnapshotInfo for the successfully deleted snapshot.
- device (string) -- the device name or node-name of a root node to delete the snapshot from
- id (string, optional) -- optional the snapshot's ID to be deleted
- name (string, optional) -- optional the snapshot's name to be deleted
- If device is not a valid block device, GenericError
- If snapshot not found, GenericError
- If the format of the image used does not support it, GenericError
- If id and name are both not specified, GenericError
-> { "execute": "blockdev-snapshot-delete-internal-sync",
"arguments": { "device": "ide-hd0",
"name": "snapshot0" }
}
<- { "return": {
"id": "1",
"name": "snapshot0",
"vm-state-size": 0,
"date-sec": 1000012,
"date-nsec": 10,
"vm-clock-sec": 100,
"vm-clock-nsec": 20,
"icount": 220414
}
}
- Object DummyBlockCoreForceArrays (Since: 8.0)
- Not used by QMP; hack to let us use BlockGraphInfoList internally
Block device exports
- handshake-max-seconds (int, optional) -- Time limit, in seconds, at which a client that has not completed the negotiation handshake will be disconnected, or 0 for no limit (since 10.0; default: 10).
- tls-creds (string, optional) -- ID of the TLS credentials object (since 2.6).
- tls-authz (string, optional) -- ID of the QAuthZ authorization object used to validate the client's x509 distinguished name. This object is is only resolved at time of use, so can be deleted and recreated on the fly while the NBD server is active. If missing, it will default to denying access (since 4.0).
- max-connections (int, optional) -- The maximum number of connections to allow at the same time, 0 for unlimited. Setting this to 1 also stops the server from advertising multiple client support (since 5.2; default: 100).
- Object NbdServerOptions
- Keep this type consistent with the NbdServerOptionsLegacy type. The only intended difference is using SocketAddress instead of SocketAddressLegacy.
- addr (SocketAddress) -- Address on which to listen (since 4.2).
- The members of NbdServerOptionsBase.
- Object NbdServerOptionsLegacy
- Keep this type consistent with the NbdServerOptions type. The only intended difference is using SocketAddressLegacy instead of SocketAddress.
- addr (SocketAddressLegacy) -- Address on which to listen (since 1.3).
- The members of NbdServerOptionsBase.
- Command nbd-server-start (Since: 1.3)
- Start an NBD server listening on the given host and port. Block devices can then be exported using nbd-server-add. The NBD server will present them as named exports; for example, another QEMU instance could refer to them as "nbd:HOST:PORT:exportname=NAME".
- Object BlockExportOptionsNbdBase (Since: 5.0)
- An NBD block export (common options shared between nbd-server-add and the NBD branch of block-export-add).
- name (string, optional) -- Export name. If unspecified, the device parameter is used as the export name. (Since 2.12)
- description (string, optional) -- Free-form description of the export, up to 4096 bytes. (Since 5.0)
- Object BlockExportOptionsNbd (Since: 5.2)
- An NBD block export (distinct options used in the NBD branch of block-export-add).
- bitmaps ([BlockDirtyBitmapOrStr], optional) -- Also export each of the named dirty bitmaps reachable from device, so the NBD client can use NBD_OPT_SET_META_CONTEXT with the metadata context name "qemu:dirty-bitmap:BITMAP" to inspect each bitmap. Since 7.1 bitmap may be specified by node/name pair.
- allocation-depth (boolean, optional) -- Also export the allocation depth map for device, so the NBD client can use NBD_OPT_SET_META_CONTEXT with the metadata context name "qemu:allocation-depth" to inspect allocation details. (since 5.2)
- The members of BlockExportOptionsNbdBase.
- Object BlockExportOptionsVhostUserBlk (Since: 5.2)
- A vhost-user-blk block export.
- addr (SocketAddress) -- The vhost-user socket on which to listen. Both 'unix' and 'fd' SocketAddress types are supported. Passed fds must be UNIX domain sockets.
- logical-block-size (int, optional) -- Logical block size in bytes. Defaults to 512 bytes.
- num-queues (int, optional) -- Number of request virtqueues. Must be greater than 0. Defaults to 1.
- Enum FuseExportAllowOther (Since: 6.1)
- Possible allow_other modes for FUSE exports.
- off -- Do not pass allow_other as a mount option.
- on -- Pass allow_other as a mount option.
- auto -- Try mounting with allow_other first, and if that fails, retry without allow_other.
- Object BlockExportOptionsFuse (Since: 6.0)
- Availability: CONFIG_FUSE
Options for exporting a block graph node on some (file) mountpoint as a raw image.
- mountpoint (string) -- Path on which to export the block device via FUSE. This must point to an existing regular file.
- growable (boolean, optional) -- Whether writes beyond the EOF should grow the block node accordingly. (default: false)
- allow-other (FuseExportAllowOther, optional) -- If this is off, only QEMU's user is allowed access to this export. That cannot be changed even with chmod or chown. Enabling this option will allow other users access to the export with the FUSE mount option "allow_other". Note that using allow_other as a non-root user requires user_allow_other to be enabled in the global fuse.conf configuration file. In auto mode (the default), the FUSE export driver will first attempt to mount the export with allow_other, and if that fails, try again without. (since 6.1; default: auto)
- Object BlockExportOptionsVduseBlk (Since: 7.1)
- A vduse-blk block export.
- name (string) -- the name of VDUSE device (must be unique across the host).
- num-queues (int, optional) -- the number of virtqueues. Defaults to 1.
- queue-size (int, optional) -- the size of virtqueue. Defaults to 256.
- logical-block-size (int, optional) -- Logical block size in bytes. Range [512, PAGE_SIZE] and must be power of 2. Defaults to 512 bytes.
- serial (string, optional) -- the serial number of virtio block device. Defaults to empty string.
- Object NbdServerAddOptions (Since: 5.0)
- An NBD block export, per legacy nbd-server-add command.
- device (string) -- The device name or node name of the node to be exported
- writable (boolean, optional) -- Whether clients should be able to write to the device via the NBD connection (default false).
- bitmap (string, optional) -- Also export a single dirty bitmap reachable from device, so the NBD client can use NBD_OPT_SET_META_CONTEXT with the metadata context name "qemu:dirty-bitmap:BITMAP" to inspect the bitmap (since 4.0).
- The members of BlockExportOptionsNbdBase.
- Command nbd-server-add (Since: 1.3)
- This command is deprecated.
Export a block node to QEMU's embedded NBD server.
The export name will be used as the id for the resulting block export.
- The members of NbdServerAddOptions.
- deprecated -- This command is deprecated. Use block-export-add instead.
- if the server is not running
- if an export with the same name already exists
- Enum BlockExportRemoveMode (Since: 2.12)
- Mode for removing a block export.
- safe -- Remove export if there are no existing connections, fail otherwise.
- hard -- Drop all connections immediately and remove export.
- Command nbd-server-remove (Since: 2.12)
- This command is deprecated.
Remove NBD export by name.
- name (string) -- Block export id.
- mode (BlockExportRemoveMode, optional) -- Mode of command operation. See BlockExportRemoveMode description. Default is 'safe'.
- deprecated -- This command is deprecated. Use block-export-del instead.
- if the server is not running
- if export is not found
- if mode is 'safe' and there are existing connections
- Command nbd-server-stop (Since: 1.3)
- Stop QEMU's embedded NBD server, and unregister all devices previously added via nbd-server-add.
- Enum BlockExportType (Since: 4.2)
- An enumeration of block export types
- nbd -- NBD export
- vhost-user-blk -- vhost-user-blk export (since 5.2)
- fuse -- FUSE export (since: 6.0)
- vduse-blk -- vduse-blk export (since 7.1)
- Object BlockExportOptions (Since: 4.2)
- Describes a block export, i.e. how single node should be exported on an external interface.
- type (BlockExportType) -- Block export type
- id (string) -- A unique identifier for the block export (across all export types)
- node-name (string) -- The node name of the block node to be exported (since: 5.2)
- writable (boolean, optional) -- True if clients should be able to write to the export (default false)
- writethrough (boolean, optional) -- If true, caches are flushed after every write request to the export before completion is signalled. (since: 5.2; default: false)
- iothread (string, optional) -- The name of the iothread object where the export will run. The default is to use the thread currently associated with the block node. (since: 5.2)
- fixed-iothread (boolean, optional) -- True prevents the block node from being moved to another thread while the export is active. If true and iothread is given, export creation fails if the block node cannot be moved to the iothread. The default is false. (since: 5.2)
- allow-inactive (boolean, optional) -- If true, the export allows the exported node to be inactive. If it is created for an inactive block node, the node remains inactive. If the export type doesn't support running on an inactive node, an error is returned. If false, inactive block nodes are automatically activated before creating the export and trying to inactivate them later fails. (since: 10.0; default: false)
- When type is nbd: The members of BlockExportOptionsNbd.
- When type is vhost-user-blk: The members of BlockExportOptionsVhostUserBlk.
- When type is fuse: The members of BlockExportOptionsFuse.
- When type is vduse-blk: The members of BlockExportOptionsVduseBlk.
- Command block-export-add (Since: 5.2)
- Creates a new block export.
- Command block-export-del (Since: 5.2)
- Request to remove a block export. This drops the user's reference to the export, but the export may still stay around after this command returns until the shutdown of the export has completed.
- id (string) -- Block export id.
- mode (BlockExportRemoveMode, optional) -- Mode of command operation. See BlockExportRemoveMode description. Default is 'safe'.
- if the export is not found
- if mode is 'safe' and the export is still in use (e.g. by existing client connections)
- Event BLOCK_EXPORT_DELETED (Since: 5.2)
- Emitted when a block export is removed and its id can be reused.
- Object BlockExportInfo (Since: 5.2)
- Information about a single block export.
- id (string) -- The unique identifier for the block export
- type (BlockExportType) -- The block export type
- node-name (string) -- The node name of the block node that is exported
- shutting-down (boolean) -- True if the export is shutting down (e.g. after a block-export-del command, but before the shutdown has completed)
- Return
- [BlockExportInfo] -- A list describing all block exports
CHARACTER DEVICES
- Object ChardevInfo (Since: 0.14)
- Information about a character device.
- label (string) -- the label of the character device
- filename (string) -- the filename of the character device
- frontend-open (boolean) -- shows whether the frontend device attached to this backend (e.g. with the chardev=... option) is in open or closed state (since 2.1)
Note:
filename is encoded using the QEMU command line
character device encoding. See the QEMU man page for details.
- Command query-chardev (Since: 0.14)
- Return information about current character devices.
- Return
- [ChardevInfo]
-> { "execute": "query-chardev" }
<- {
"return": [
{
"label": "charchannel0",
"filename": "unix:/var/lib/libvirt/qemu/seabios.rhel6.agent,server=on",
"frontend-open": false
},
{
"label": "charmonitor",
"filename": "unix:/var/lib/libvirt/qemu/seabios.rhel6.monitor,server=on",
"frontend-open": true
},
{
"label": "charserial0",
"filename": "pty:/dev/pts/2",
"frontend-open": true
}
]
}
- Object ChardevBackendInfo (Since: 2.0)
- Information about a character device backend
- Command query-chardev-backends (Since: 2.0)
- Return information about character device backends.
- Return
- [ChardevBackendInfo]
-> { "execute": "query-chardev-backends" }
<- {
"return":[
{
"name":"udp"
},
{
"name":"tcp"
},
{
"name":"unix"
},
{
"name":"spiceport"
}
]
}
- Enum DataFormat (Since: 1.4)
- An enumeration of data format.
- Command ringbuf-write (Since: 1.4)
- Write to a ring buffer character device.
- device (string) -- the ring buffer character device name
- data (string) -- data to write
- format (DataFormat, optional) --
data encoding (default 'utf8').
- base64: data must be base64 encoded text. Its binary decoding gets written.
- utf8: data's UTF-8 encoding is written
- data itself is always Unicode regardless of format, like any other string.
-> { "execute": "ringbuf-write",
"arguments": { "device": "foo",
"data": "abcdefgh",
"format": "utf8" } }
<- { "return": {} }
- Command ringbuf-read (Since: 1.4)
- Read from a ring buffer character device.
- device (string) -- the ring buffer character device name
- size (int) -- how many bytes to read at most
- format (DataFormat, optional) --
data encoding (default 'utf8').
- base64: the data read is returned in base64 encoding.
- utf8: the data read is interpreted as UTF-8. Bug: can screw up when the buffer contains invalid UTF-8 sequences, NUL characters, after the ring buffer lost data, and when reading stops because the size limit is reached.
- The return value is always Unicode regardless of format, like any other string.
- Return
- string -- data read from the device
-> { "execute": "ringbuf-read",
"arguments": { "device": "foo",
"size": 1000,
"format": "utf8" } }
<- { "return": "abcdefgh" }
- Object ChardevCommon (Since: 2.6)
- Configuration shared across all chardev backends
- logfile (string, optional) -- The name of a logfile to save output
- logappend (boolean, optional) -- true to append instead of truncate (default to false to truncate)
- Object ChardevFile (Since: 1.4)
- Configuration info for file chardevs.
- in (string, optional) -- The name of the input file
- out (string) -- The name of the output file
- append (boolean, optional) -- Open the file in append mode (default false to truncate) (Since 2.6)
- The members of ChardevCommon.
- Object ChardevHostdev (Since: 1.4)
- Configuration info for device and pipe chardevs.
- device (string) -- The name of the special file for the device, i.e. /dev/ttyS0 on Unix or COM1: on Windows
- The members of ChardevCommon.
- Object ChardevSocket (Since: 1.4)
- Configuration info for (stream) socket chardevs.
- addr (SocketAddressLegacy) -- socket address to listen on (server=true) or connect to (server=false)
- tls-creds (string, optional) -- the ID of the TLS credentials object (since 2.6)
- tls-authz (string, optional) -- the ID of the QAuthZ authorization object against which the client's x509 distinguished name will be validated. This object is only resolved at time of use, so can be deleted and recreated on the fly while the chardev server is active. If missing, it will default to denying access (since 4.0)
- server (boolean, optional) -- create server socket (default: true)
- wait (boolean, optional) -- wait for incoming connection on server sockets (default: false). Silently ignored with server: false. This use is deprecated.
- nodelay (boolean, optional) -- set TCP_NODELAY socket option (default: false)
- telnet (boolean, optional) -- enable telnet protocol on server sockets (default: false)
- tn3270 (boolean, optional) -- enable tn3270 protocol on server sockets (default: false) (Since: 2.10)
- websocket (boolean, optional) -- enable websocket protocol on server sockets (default: false) (Since: 3.1)
- reconnect-ms (int, optional) -- For a client socket, if a socket is disconnected, then attempt a reconnect after the given number of milliseconds. Setting this to zero disables this function. (default: 0) (Since: 9.2)
- The members of ChardevCommon.
- Object ChardevUdp (Since: 1.5)
- Configuration info for datagram socket chardevs.
- remote (SocketAddressLegacy) -- remote address
- local (SocketAddressLegacy, optional) -- local address
- The members of ChardevCommon.
- Object ChardevMux (Since: 1.5)
- Configuration info for mux chardevs.
- Object ChardevHub (Since: 10.0)
- Configuration info for hub chardevs.
- chardevs ([string]) -- IDs to be added to this hub (maximum 4 devices).
- The members of ChardevCommon.
- Object ChardevStdio (Since: 1.5)
- Configuration info for stdio chardevs.
- signal (boolean, optional) -- Allow signals (such as SIGINT triggered by ^C) be delivered to QEMU. Default: true.
- The members of ChardevCommon.
- Object ChardevSpiceChannel (Since: 1.5)
- Availability: CONFIG_SPICE
Configuration info for spice vm channel chardevs.
- Object ChardevSpicePort (Since: 1.5)
- Availability: CONFIG_SPICE
Configuration info for spice port chardevs.
- fqdn (string) -- name of the channel (see docs/spice-port-fqdn.txt)
- The members of ChardevCommon.
- Object ChardevDBus (Since: 7.0)
- Availability: CONFIG_DBUS_DISPLAY
Configuration info for DBus chardevs.
- name (string) -- name of the channel (following docs/spice-port-fqdn.txt)
- The members of ChardevCommon.
- Object ChardevVC (Since: 1.5)
- Configuration info for virtual console chardevs.
- width (int, optional) -- console width, in pixels
- height (int, optional) -- console height, in pixels
- cols (int, optional) -- console width, in chars
- rows (int, optional) -- console height, in chars
- The members of ChardevCommon.
Note:
The options are only effective when the VNC or SDL
graphical display backend is active. They are ignored with the GTK, Spice, VNC
and D-Bus display backends.
- Object ChardevRingbuf (Since: 1.5)
- Configuration info for ring buffer chardevs.
- size (int, optional) -- ring buffer size, must be power of two, default is 65536
- The members of ChardevCommon.
- Object ChardevQemuVDAgent (Since: 6.1)
- Availability: CONFIG_SPICE_PROTOCOL
Configuration info for QEMU vdagent implementation.
- mouse (boolean, optional) -- enable/disable mouse, default is enabled.
- clipboard (boolean, optional) -- enable/disable clipboard, default is disabled.
- The members of ChardevCommon.
- Object ChardevPty (Since: 9.2)
- Configuration info for pty implementation.
- path (string, optional) -- optional path to create a symbolic link that points to the allocated PTY
- The members of ChardevCommon.
- file -- regular files
- serial -- serial host device
- parallel -- parallel host device
- pipe -- pipes (since 1.5)
- socket -- stream socket
- udp -- datagram socket (since 1.5)
- pty -- pseudo-terminal
- null -- provides no input, throws away output
- mux -- (since 1.5)
- hub -- (since 10.0)
- msmouse -- emulated Microsoft serial mouse (since 1.5)
- wctablet -- emulated Wacom Penpartner serial tablet (since 2.9)
- braille -- Baum Braille device (since 1.5)
- testdev -- device for test-suite control (since 2.2)
- stdio -- standard I/O (since 1.5)
- console -- Windows console (since 1.5)
- spicevmc -- spice vm channel (since 1.5)
- spiceport -- Spice port channel (since 1.5)
- qemu-vdagent -- Spice vdagent (since 6.1)
- dbus -- D-Bus channel (since 7.0)
- vc -- virtual console (since 1.5)
- ringbuf -- memory ring buffer (since 1.6)
- memory -- synonym for ringbuf (since 1.5)
- deprecated -- Member memory is deprecated. Use ringbuf instead.
- Object ChardevSpiceChannelWrapper (Since: 1.5)
- Availability: CONFIG_SPICE.INDENT 7.0
- Members
- data (ChardevSpiceChannel) -- Configuration info for spice vm channel chardevs
- Object ChardevSpicePortWrapper (Since: 1.5)
- Availability: CONFIG_SPICE.INDENT 7.0
- Members
- data (ChardevSpicePort) -- Configuration info for spice port chardevs
- Object ChardevQemuVDAgentWrapper (Since: 6.1)
- Availability: CONFIG_SPICE_PROTOCOL.INDENT 7.0
- Members
- data (ChardevQemuVDAgent) -- Configuration info for QEMU vdagent implementation
- Object ChardevDBusWrapper (Since: 7.0)
- Availability: CONFIG_DBUS_DISPLAY.INDENT 7.0
- Members
- data (ChardevDBus) -- Configuration info for DBus chardevs
- Object ChardevBackend (Since: 1.4)
- Configuration info for the new chardev backend.
- type (ChardevBackendKind) -- backend type
- When type is file: The members of ChardevFileWrapper.
- When type is serial: The members of ChardevHostdevWrapper.
- When type is parallel: The members of ChardevHostdevWrapper.
- When type is pipe: The members of ChardevHostdevWrapper.
- When type is socket: The members of ChardevSocketWrapper.
- When type is udp: The members of ChardevUdpWrapper.
- When type is pty: The members of ChardevPtyWrapper.
- When type is null: The members of ChardevCommonWrapper.
- When type is mux: The members of ChardevMuxWrapper.
- When type is hub: The members of ChardevHubWrapper.
- When type is msmouse: The members of ChardevCommonWrapper.
- When type is wctablet: The members of ChardevCommonWrapper.
- When type is braille: The members of ChardevCommonWrapper.
- When type is testdev: The members of ChardevCommonWrapper.
- When type is stdio: The members of ChardevStdioWrapper.
- When type is console: The members of ChardevCommonWrapper.
- When type is spicevmc: The members of ChardevSpiceChannelWrapper.
- When type is spiceport: The members of ChardevSpicePortWrapper.
- When type is qemu-vdagent: The members of ChardevQemuVDAgentWrapper.
- When type is dbus: The members of ChardevDBusWrapper.
- When type is vc: The members of ChardevVCWrapper.
- When type is ringbuf: The members of ChardevRingbufWrapper.
- When type is memory: The members of ChardevRingbufWrapper.
- Object ChardevReturn (Since: 1.4)
- Return info about the chardev backend just created.
- pty (string, optional) -- name of the slave pseudoterminal device, present if and only if a chardev of type 'pty' was created
- Command chardev-add (Since: 1.4)
- Add a character device backend
- id (string) -- the chardev's ID, must be unique
- backend (ChardevBackend) -- backend type and parameters
- Return
- ChardevReturn
-> { "execute" : "chardev-add",
"arguments" : { "id" : "foo",
"backend" : { "type" : "null", "data" : {} } } }
<- { "return": {} }
-> { "execute" : "chardev-add",
"arguments" : { "id" : "bar",
"backend" : { "type" : "file",
"data" : { "out" : "/tmp/bar.log" } } } }
<- { "return": {} }
-> { "execute" : "chardev-add",
"arguments" : { "id" : "baz",
"backend" : { "type" : "pty", "data" : {} } } }
<- { "return": { "pty" : "/dev/pty/42" } }
- Command chardev-change (Since: 2.10)
- Change a character device backend
- id (string) -- the chardev's ID, must exist
- backend (ChardevBackend) -- new backend type and parameters
- Return
- ChardevReturn
-> { "execute" : "chardev-change",
"arguments" : { "id" : "baz",
"backend" : { "type" : "pty", "data" : {} } } }
<- { "return": { "pty" : "/dev/pty/42" } }
-> {"execute" : "chardev-change",
"arguments" : {
"id" : "charchannel2",
"backend" : {
"type" : "socket",
"data" : {
"addr" : {
"type" : "unix" ,
"data" : {
"path" : "/tmp/charchannel2.socket"
}
},
"server" : true,
"wait" : false }}}}
<- {"return": {}}
- Event VSERPORT_CHANGE (Since: 2.1)
- Emitted when the guest opens or closes a virtio-serial port.
- id (string) -- device identifier of the virtio-serial port
- open (boolean) -- true if the guest has opened the virtio-serial port
Note:
This event is rate-limited.
<- { "event": "VSERPORT_CHANGE",
"data": { "id": "channel0", "open": true },
"timestamp": { "seconds": 1401385907, "microseconds": 422329 } }
USER AUTHORIZATION
- Enum QAuthZListPolicy (Since: 4.0)
- The authorization policy result
- Enum QAuthZListFormat (Since: 4.0)
- The authorization policy match format
- Object QAuthZListRule (Since: 4.0)
- A single authorization rule.
- match (string) -- a string or glob to match against a user identity
- policy (QAuthZListPolicy) -- the result to return if match evaluates to true
- format (QAuthZListFormat, optional) -- the format of the match rule (default 'exact')
- Object AuthZListProperties (Since: 4.0)
- Properties for authz-list objects.
- policy (QAuthZListPolicy, optional) -- Default policy to apply when no rule matches (default: deny)
- rules ([QAuthZListRule], optional) -- Authorization rules based on matching user
- Object AuthZListFileProperties (Since: 4.0)
- Properties for authz-listfile objects.
- filename (string) -- File name to load the configuration from. The file must contain valid JSON for AuthZListProperties.
- refresh (boolean, optional) -- If true, inotify is used to monitor the file, automatically reloading changes. If an error occurs during reloading, all authorizations will fail until the file is next successfully loaded. (default: true if the binary was built with CONFIG_INOTIFY1, false otherwise)
- Object AuthZPAMProperties (Since: 4.0)
- Properties for authz-pam objects.
- Object AuthZSimpleProperties (Since: 4.0)
- Properties for authz-simple objects.
- identity (string) -- Identifies the allowed user. Its format depends on the network service that authorization object is associated with. For authorizing based on TLS x509 certificates, the identity must be the x509 distinguished name.
TRANSACTIONS
- Object Abort (Since: 1.6)
- This action can be used to test transaction failure.
- Enum ActionCompletionMode (Since: 2.5)
- An enumeration of transactional completion modes.
- individual -- Do not attempt to cancel any other Actions if any Actions fail after the Transaction request succeeds. All Actions that can complete successfully will do so without waiting on others. This is the default.
- grouped -- If any Action fails after the Transaction succeeds, cancel all Actions. Actions do not complete until all Actions are ready to complete. May be rejected by Actions that do not support this completion mode.
- abort -- Since 1.6
- block-dirty-bitmap-add -- Since 2.5
- block-dirty-bitmap-remove -- Since 4.2
- block-dirty-bitmap-clear -- Since 2.5
- block-dirty-bitmap-enable -- Since 4.0
- block-dirty-bitmap-disable -- Since 4.0
- block-dirty-bitmap-merge -- Since 4.0
- blockdev-backup -- Since 2.3
- blockdev-snapshot -- Since 2.5
- blockdev-snapshot-internal-sync -- Since 1.7
- blockdev-snapshot-sync -- since 1.1
- drive-backup -- Since 1.6
- deprecated -- Member drive-backup is deprecated. Use member blockdev-backup instead.
- Object TransactionAction (Since: 1.1)
- A discriminated record of operations that can be performed with transaction.
- type (TransactionActionKind) -- the operation to be performed
- When type is abort: The members of AbortWrapper.
- When type is block-dirty-bitmap-add: The members of BlockDirtyBitmapAddWrapper.
- When type is block-dirty-bitmap-remove: The members of BlockDirtyBitmapWrapper.
- When type is block-dirty-bitmap-clear: The members of BlockDirtyBitmapWrapper.
- When type is block-dirty-bitmap-enable: The members of BlockDirtyBitmapWrapper.
- When type is block-dirty-bitmap-disable: The members of BlockDirtyBitmapWrapper.
- When type is block-dirty-bitmap-merge: The members of BlockDirtyBitmapMergeWrapper.
- When type is blockdev-backup: The members of BlockdevBackupWrapper.
- When type is blockdev-snapshot: The members of BlockdevSnapshotWrapper.
- When type is blockdev-snapshot-internal-sync: The members of BlockdevSnapshotInternalWrapper.
- When type is blockdev-snapshot-sync: The members of BlockdevSnapshotSyncWrapper.
- When type is drive-backup: The members of DriveBackupWrapper.
- Object TransactionProperties (Since: 2.5)
- Optional arguments to modify the behavior of a Transaction.
- completion-mode (ActionCompletionMode, optional) -- Controls how jobs launched asynchronously by Actions will complete or fail as a group. See ActionCompletionMode for details.
- Command transaction (Since: 1.1)
- Executes a number of transactionable QMP commands atomically. If any
operation fails, then the entire set of actions will be abandoned and the
appropriate error returned.
For external snapshots, the dictionary contains the device, the file to use for the new snapshot, and the format. The default format, if not specified, is qcow2.
Each new snapshot defaults to being created by QEMU (wiping any contents if the file already exists), but it is also possible to reuse an externally-created file. In the latter case, you should ensure that the new image file has the same contents as the current one; QEMU cannot perform any meaningful check. Typically this is achieved by using the current image file as the backing file for the new image.
On failure, the original disks pre-snapshot attempt will be used.
For internal snapshots, the dictionary contains the device and the snapshot's name. If an internal snapshot matching name already exists, the request will be rejected. Only some image formats support it, for example, qcow2, and rbd,
On failure, QEMU will try delete the newly created internal snapshot in the transaction. When an I/O error occurs during deletion, the user needs to fix it later with qemu-img or other command.
- actions ([TransactionAction]) -- List of TransactionAction; information needed for the respective operations.
- properties (TransactionProperties, optional) -- structure of additional options to control the execution of the transaction. See TransactionProperties for additional detail.
- Any errors from commands in the transaction
Note:
The transaction aborts on the first failure. Therefore,
there will be information on only one failed operation returned in an error
condition, and subsequent actions will not have been attempted.
-> { "execute": "transaction",
"arguments": { "actions": [
{ "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd0",
"snapshot-file": "/some/place/my-image",
"format": "qcow2" } },
{ "type": "blockdev-snapshot-sync", "data" : { "node-name": "myfile",
"snapshot-file": "/some/place/my-image2",
"snapshot-node-name": "node3432",
"mode": "existing",
"format": "qcow2" } },
{ "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd1",
"snapshot-file": "/some/place/my-image2",
"mode": "existing",
"format": "qcow2" } },
{ "type": "blockdev-snapshot-internal-sync", "data" : {
"device": "ide-hd2",
"name": "snapshot0" } } ] } }
<- { "return": {} }
QMP MONITOR CONTROL
- Command qmp_capabilities (Since: 0.13)
- Enable QMP capabilities.
- enable ([QMPCapability], optional) -- An optional list of QMPCapability values to enable. The client must not enable any capability that is not mentioned in the QMP greeting message. If the field is not provided, it means no QMP capabilities will be enabled. (since 2.12)
-> { "execute": "qmp_capabilities",
"arguments": { "enable": [ "oob" ] } }
<- { "return": {} }
Note:
This command is valid exactly when first connecting: it
must be issued before any other command will be accepted, and will fail once
the monitor is accepting other commands. (see QEMU Machine Protocol
Specification <>)
Note:
The QMP client needs to explicitly enable QMP
capabilities, otherwise all the QMP capabilities will be turned off by
default.
- Enum QMPCapability (Since: 2.12)
- Enumeration of capabilities to be advertised during initial client connection, used for agreeing on particular QMP extension behaviors.
- oob -- QMP ability to support out-of-band requests. (Please refer to qmp-spec.rst for more information on OOB)
- Object VersionTriple (Since: 2.4)
- A three-part version number.
- major (int) -- The major version number.
- minor (int) -- The minor version number.
- micro (int) -- The micro version number.
- Object VersionInfo (Since: 0.14)
- A description of QEMU's version.
- qemu (VersionTriple) -- The version of QEMU. By current convention, a micro version of 50 signifies a development branch. A micro version greater than or equal to 90 signifies a release candidate for the next minor version. A micro version of less than 50 signifies a stable release.
- package (string) -- QEMU will always set this field to an empty string. Downstream versions of QEMU should set this to a non-empty string. The exact format depends on the downstream however it highly recommended that a unique name is used.
- Command query-version (Since: 0.14)
- Return the current version of QEMU.
- Return
- VersionInfo -- An object describing the current version of QEMU.
-> { "execute": "query-version" }
<- {
"return":{
"qemu":{
"major":0,
"minor":11,
"micro":5
},
"package":""
}
}
- Object CommandInfo (Since: 0.14)
- Information about a QMP command
- Command query-commands (Since: 0.14)
- Return a list of supported QMP commands by this server
- Return
- [CommandInfo] -- A list of all supported commands
-> { "execute": "query-commands" }
<- {
"return":[
{
"name":"query-balloon"
},
{
"name":"system_powerdown"
},
...
]
}
This example has been shortened as the real response is too long.
- Command quit (Since: 0.14)
- Request graceful QEMU process termination.
While every attempt is made to send the QMP response before terminating, this is not guaranteed. When using this interface, a premature EOF would not be unexpected.
- Enum MonitorMode (Since: 5.0)
- An enumeration of monitor modes.
- readline -- HMP monitor (human-oriented command line interface)
- control -- QMP monitor (JSON-based machine interface)
- Object MonitorOptions (Since: 5.0)
- Options to be used for adding a new monitor.
- id (string, optional) -- Name of the monitor
- mode (MonitorMode, optional) -- Selects the monitor mode (default: readline in the system emulator, control in qemu-storage-daemon)
- pretty (boolean, optional) -- Enables pretty printing (QMP only)
- chardev (string) -- Name of a character device to expose the monitor on
QMP INTROSPECTION
- Command query-qmp-schema (Since: 2.5)
- Command query-qmp-schema exposes the QMP wire ABI as an array of
SchemaInfo. This lets QMP clients figure out what commands and
events are available in this QEMU, and their parameters and results.
However, the SchemaInfo can't reflect all the rules and restrictions that apply to QMP. It's interface introspection (figuring out what's there), not interface specification. The specification is in the QAPI schema.
Furthermore, while we strive to keep the QMP wire format backwards-compatible across QEMU versions, the introspection output is not guaranteed to have the same stability. For example, one version of QEMU may list an object member as an optional non-variant, while another lists the same member only through the object's variants; or the type of a member may change from a generic string into a specific enum or from one specific type into an alternate that includes the original type alongside something else.
- Return
- [SchemaInfo] --
an array where each element describes an entity in the ABI: command, event, type, ...
The order of the various elements is unspecified; however, all names are guaranteed to be unique (no name will be duplicated with different meta-types).
Note:
The QAPI schema is also used to help define
internal interfaces, by defining QAPI types. These are not part of the
QMP wire ABI, and therefore not returned by this command.
- Enum SchemaMetaType (Since: 2.5)
- This is a SchemaInfo's meta type, i.e. the kind of entity it describes.
- builtin -- a predefined type such as 'int' or 'bool'.
- enum -- an enumeration type
- array -- an array type
- object -- an object type (struct or union)
- alternate -- an alternate type
- command -- a QMP command
- event -- a QMP event
- name (string) -- the entity's name, inherited from base. The SchemaInfo is always referenced by this name. Commands and events have the name defined in the QAPI schema. Unlike command and event names, type names are not part of the wire ABI. Consequently, type names are meaningless strings here, although they are still guaranteed unique regardless of meta-type.
- meta-type (SchemaMetaType) -- the entity's meta type, inherited from base.
- features ([string], optional) -- names of features associated with the entity, in no particular order. (since 4.1 for object types, 4.2 for commands, 5.0 for the rest)
- When meta-type is builtin: The members of SchemaInfoBuiltin.
- When meta-type is enum: The members of SchemaInfoEnum.
- When meta-type is array: The members of SchemaInfoArray.
- When meta-type is object: The members of SchemaInfoObject.
- When meta-type is alternate: The members of SchemaInfoAlternate.
- When meta-type is command: The members of SchemaInfoCommand.
- When meta-type is event: The members of SchemaInfoEvent.
- Object SchemaInfoBuiltin (Since: 2.5)
- Additional SchemaInfo members for meta-type 'builtin'.
- Enum JSONType (Since: 2.5)
- The four primitive and two structured types according to RFC 8259 section 1, plus 'int' (split off 'number'), plus the obvious top type 'value'.
- string -- JSON string
- number -- JSON number
- int -- JSON number that is an integer
- boolean -- literal false or true
- null -- literal null
- object -- JSON object
- array -- JSON array
- value -- any JSON value
- Object SchemaInfoEnum (Since: 2.5)
- Additional SchemaInfo members for meta-type 'enum'.
- members ([SchemaInfoEnumMember]) -- the enum type's members, in no particular order. (since 6.2)
- values ([string]) -- the enumeration type's member names, in no particular order. Redundant with members. Just for backward compatibility.
- deprecated -- Member values is deprecated. Use members instead.
Values of this type are JSON string on the wire.
- Object SchemaInfoEnumMember (Since: 6.2)
- An object member.
- name (string) -- the member's name, as defined in the QAPI schema.
- features ([string], optional) -- names of features associated with the member, in no particular order.
- Object SchemaInfoArray (Since: 2.5)
- Additional SchemaInfo members for meta-type 'array'.
Values of this type are JSON array on the wire.
- Object SchemaInfoObject (Since: 2.5)
- Additional SchemaInfo members for meta-type 'object'.
- members ([SchemaInfoObjectMember]) -- the object type's (non-variant) members, in no particular order.
- tag (string, optional) -- the name of the member serving as type tag. An element of members with this name must exist.
- variants ([SchemaInfoObjectVariant], optional) -- variant members, i.e. additional members that depend on the type tag's value. Present exactly when tag is present. The variants are in no particular order, and may even differ from the order of the values of the enum type of the tag.
Values of this type are JSON object on the wire.
- Object SchemaInfoObjectMember (Since: 2.5)
- An object member.
- name (string) -- the member's name, as defined in the QAPI schema.
- type (string) -- the name of the member's type.
- default (value, optional) -- default when used as command parameter. If absent, the parameter is mandatory. If present, the value must be null. The parameter is optional, and behavior when it's missing is not specified here. Future extension: if present and non-null, the parameter is optional, and defaults to this value.
- features ([string], optional) -- names of features associated with the member, in no particular order. (since 5.0)
- Object SchemaInfoObjectVariant (Since: 2.5)
- The variant members for a value of the type tag.
- case (string) -- a value of the type tag.
- type (string) -- the name of the object type that provides the variant members when the type tag has value case.
- Object SchemaInfoAlternate (Since: 2.5)
- Additional SchemaInfo members for meta-type 'alternate'.
- members ([SchemaInfoAlternateMember]) -- the alternate type's members, in no particular order. The members' wire encoding is distinct, see How to use the QAPI code generator <> section Alternate types.
On the wire, this can be any of the members.
- Object SchemaInfoAlternateMember (Since: 2.5)
- An alternate member.
- Object SchemaInfoCommand (Since: 2.5)
- Additional SchemaInfo members for meta-type 'command'.
- arg-type (string) -- the name of the object type that provides the command's parameters.
- ret-type (string) -- the name of the command's result type.
- allow-oob (boolean, optional) -- whether the command allows out-of-band execution, defaults to false (Since: 2.12)
- Object SchemaInfoEvent (Since: 2.5)
- Additional SchemaInfo members for meta-type 'event'.
QEMU OBJECT MODEL (QOM)
- name (string) -- the name of the property
- type (string) --
the type of the property. This will typically come in one of four forms:
- 1.
- A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'. These types are mapped to the appropriate JSON type.
- 2.
- A child type in the form 'child<subtype>' where subtype is a qdev device type name. Child properties create the composition tree.
- 3.
- A link type in the form 'link<subtype>' where subtype is a qdev device type name. Link properties form the device model graph.
- description (string, optional) -- if specified, the description of the property.
- default-value (value, optional) -- the default value, if any (since 5.0)
- name (string) -- the name of the property.
- type (string) -- the type of the property, as described in ObjectPropertyInfo.
- value (value, optional) -- the value of the property. Absent when the property cannot be read.
Since 10.1
Since 10.1
- Command qom-list (Since: 1.2)
- List properties of a object given a path in the object model.
- path (string) -- the path within the object model. See qom-get for a description of this parameter.
- Return
- [ObjectPropertyInfo] -- a list that describe the properties of the object.
-> { "execute": "qom-list",
"arguments": { "path": "/chardevs" } }
<- { "return": [ { "name": "type", "type": "string" },
{ "name": "parallel0", "type": "child<chardev-vc>" },
{ "name": "serial0", "type": "child<chardev-vc>" },
{ "name": "mon0", "type": "child<chardev-stdio>" } ] }
- Command qom-get (Since: 1.2)
- Get a property value.
- path (string) --
The path within the object model. There are two forms of supported paths--absolute and partial paths.
Absolute paths are derived from the root object and can follow child<> or link<> properties. Since they can follow link<> properties, they can be arbitrarily long. Absolute paths look like absolute filenames and are prefixed with a leading slash.
Partial paths look like relative filenames. They do not begin with a prefix. The matching rules for partial paths are subtle but designed to make specifying objects easy. At each level of the composition tree, the partial path is matched as an absolute path. The first match is not returned. At least two matches are searched for. A successful result is only returned if only one match is found. If more than one match is found, a flag is return to indicate that the match was ambiguous.
- property (string) -- The property name to read
- Return
- value -- The property value. The type depends on the property type. child<> and link<> properties are returned as #str pathnames. All integer property types (u8, u16, etc) are returned as #int.
- Example: Use absolute path
-> { "execute": "qom-get",
"arguments": { "path": "/machine/unattached/device[0]",
"property": "hotplugged" } }
<- { "return": false }
- Example: Use partial path
-> { "execute": "qom-get",
"arguments": { "path": "unattached/sysbus",
"property": "type" } }
<- { "return": "System" }
- Command qom-list-get
- List properties and their values for each object path in the input list.
- paths ([string]) -- The absolute or partial path for each object, as described in qom-get.
- If any path is not valid or is ambiguous
- Return
- [ObjectPropertiesValues] -- A list where each element is the result for the corresponding element of paths.
Since 10.1
- Command qom-set (Since: 1.2)
- Set a property value.
- path (string) -- see qom-get for a description of this parameter
- property (string) -- the property name to set
- value (value) -- a value who's type is appropriate for the property type. See qom-get for a description of type mapping.
-> { "execute": "qom-set",
"arguments": { "path": "/machine",
"property": "graphics",
"value": false } }
<- { "return": {} }
- Object ObjectTypeInfo (Since: 1.1)
- This structure describes a search result from qom-list-types
- name (string) -- the type name found in the search
- abstract (boolean, optional) -- the type is abstract and can't be directly instantiated. Omitted if false. (since 2.10)
- parent (string, optional) -- Name of parent type, if any (since 2.10)
- Command qom-list-types (Since: 1.1)
- Return a list of types given search parameters.
- implements (string, optional) -- if specified, only return types that implement this type name
- abstract (boolean, optional) -- if true, include abstract types in the results
- Return
- [ObjectTypeInfo] -- a list of types, or an empty list if no results are found
- Command qom-list-properties (Since: 2.12)
- List properties associated with a QOM object.
Note:
Objects can create properties at runtime, for example to
describe links between different devices and/or objects. These properties are
not included in the output of this command.
- Return
- [ObjectPropertyInfo] -- a list describing object properties
- Object CanHostSocketcanProperties (Since: 2.12)
- Availability: CONFIG_LINUX
Properties for can-host-socketcan objects.
- if (string) -- interface name of the host system CAN bus to connect to
- canbus (string) -- object ID of the can-bus object to connect to the host interface
- Object ColoCompareProperties (Since: 2.8)
- Properties for colo-compare objects.
- primary_in (string) -- name of the character device backend to use for the primary input (incoming packets are redirected to outdev)
- secondary_in (string) -- name of the character device backend to use for secondary input (incoming packets are only compared to the input on primary_in and then dropped)
- outdev (string) -- name of the character device backend to use for output
- iothread (string) -- name of the iothread to run in
- notify_dev (string, optional) -- name of the character device backend to be used to communicate with the remote colo-frame (only for Xen COLO)
- compare_timeout (int, optional) -- the maximum time to hold a packet from primary_in for comparison with an incoming packet on secondary_in in milliseconds (default: 3000)
- expired_scan_cycle (int, optional) -- the interval at which colo-compare checks whether packets from primary have timed out, in milliseconds (default: 3000)
- max_queue_size (int, optional) -- the maximum number of packets to keep in the queue for comparing with incoming packets from secondary_in. If the queue is full and additional packets are received, the additional packets are dropped. (default: 1024)
- vnet_hdr_support (boolean, optional) -- if true, vnet header support is enabled (default: false)
- Object CryptodevBackendProperties (Since: 2.8)
- Properties for cryptodev-backend and cryptodev-backend-builtin objects.
- queues (int, optional) -- the number of queues for the cryptodev backend. Ignored for cryptodev-backend and must be 1 for cryptodev-backend-builtin. (default: 1)
- throttle-bps (int, optional) -- limit total bytes per second (Since 8.0)
- throttle-ops (int, optional) -- limit total operations per second (Since 8.0)
- Object CryptodevVhostUserProperties (Since: 2.12)
- Availability: CONFIG_VHOST_CRYPTO
Properties for cryptodev-vhost-user objects.
- chardev (string) -- the name of a Unix domain socket character device that connects to the vhost-user server
- The members of CryptodevBackendProperties.
- Object DBusVMStateProperties (Since: 5.0)
- Properties for dbus-vmstate objects.
- addr (string) -- the name of the DBus bus to connect to
- id-list (string, optional) -- a comma separated list of DBus IDs of helpers whose data should be included in the VM state on migration
- Enum NetfilterInsert (Since: 5.0)
- Indicates where to insert a netfilter relative to a given other filter.
- Object NetfilterProperties (Since: 2.5)
- Properties for objects of classes derived from netfilter.
- netdev (string) -- id of the network device backend to filter
- queue (NetFilterDirection, optional) -- indicates which queue(s) to filter (default: all)
- status (string, optional) -- indicates whether the filter is enabled ("on") or disabled ("off") (default: "on")
- position (string, optional) -- specifies where the filter should be inserted in the filter list. "head" means the filter is inserted at the head of the filter list, before any existing filters. "tail" means the filter is inserted at the tail of the filter list, behind any existing filters (default). "id=<id>" means the filter is inserted before or behind the filter specified by <id>, depending on the insert property. (default: "tail")
- insert (NetfilterInsert, optional) -- where to insert the filter relative to the filter given in position. Ignored if position is "head" or "tail". (default: behind)
- Object FilterBufferProperties (Since: 2.5)
- Properties for filter-buffer objects.
- interval (int) -- a non-zero interval in microseconds. All packets arriving in the given interval are delayed until the end of the interval.
- The members of NetfilterProperties.
- Object FilterDumpProperties (Since: 2.5)
- Properties for filter-dump objects.
- file (string) -- the filename where the dumped packets should be stored
- maxlen (int, optional) -- maximum number of bytes in a packet that are stored (default: 65536)
- The members of NetfilterProperties.
- Object FilterMirrorProperties (Since: 2.6)
- Properties for filter-mirror objects.
- outdev (string) -- the name of a character device backend to which all incoming packets are mirrored
- vnet_hdr_support (boolean, optional) -- if true, vnet header support is enabled (default: false)
- The members of NetfilterProperties.
- Object FilterRedirectorProperties (Since: 2.6)
- Properties for filter-redirector objects.
At least one of indev or outdev must be present. If both are present, they must not refer to the same character device backend.
- indev (string, optional) -- the name of a character device backend from which packets are received and redirected to the filtered network device
- outdev (string, optional) -- the name of a character device backend to which all incoming packets are redirected
- vnet_hdr_support (boolean, optional) -- if true, vnet header support is enabled (default: false)
- The members of NetfilterProperties.
- Object FilterRewriterProperties (Since: 2.8)
- Properties for filter-rewriter objects.
- vnet_hdr_support (boolean, optional) -- if true, vnet header support is enabled (default: false)
- The members of NetfilterProperties.
- Object InputBarrierProperties (Since: 4.2)
- Properties for input-barrier objects.
- name (string) -- the screen name as declared in the screens section of barrier.conf
- server (string, optional) -- hostname of the Barrier server (default: "localhost")
- port (string, optional) -- TCP port of the Barrier server (default: "24800")
- x-origin (string, optional) -- x coordinate of the leftmost pixel on the guest screen (default: "0")
- y-origin (string, optional) -- y coordinate of the topmost pixel on the guest screen (default: "0")
- width (string, optional) -- the width of secondary screen in pixels (default: "1920")
- height (string, optional) -- the height of secondary screen in pixels (default: "1080")
- Object InputLinuxProperties (Since: 2.6)
- Availability: CONFIG_LINUX
Properties for input-linux objects.
- evdev (string) -- the path of the host evdev device to use
- grab_all (boolean, optional) -- if true, grab is toggled for all devices (e.g. both keyboard and mouse) instead of just one device (default: false)
- repeat (boolean, optional) -- enables auto-repeat events (default: false)
- grab-toggle (GrabToggleKeys, optional) -- the key or key combination that toggles device grab (default: ctrl-ctrl)
- Object EventLoopBaseProperties (Since: 7.1)
- Common properties for event loops
- aio-max-batch (int, optional) -- maximum number of requests in a batch for the AIO engine, 0 means that the engine will use its default. (default: 0)
- thread-pool-min (int, optional) -- minimum number of threads reserved in the thread pool (default:0)
- thread-pool-max (int, optional) -- maximum number of threads the thread pool can contain (default:64)
- Object IothreadProperties (Since: 2.0)
- Properties for iothread objects.
- poll-max-ns (int, optional) -- the maximum number of nanoseconds to busy wait for events. 0 means polling is disabled (default: 32768 on POSIX hosts, 0 otherwise)
- poll-grow (int, optional) -- the multiplier used to increase the polling time when the algorithm detects it is missing events due to not polling long enough. 0 selects a default behaviour (default: 0)
- poll-shrink (int, optional) -- the divisor used to decrease the polling time when the algorithm detects it is spending too long polling without encountering events. 0 selects a default behaviour (default: 0)
- The members of EventLoopBaseProperties.
The aio-max-batch option is available since 6.1.
- Object MainLoopProperties (Since: 7.1)
- Properties for the main-loop object.
- Object MemoryBackendProperties (Since: 2.1)
- Properties for objects of classes derived from memory-backend.
- merge (boolean, optional) -- if true, mark the memory as mergeable (default depends on the machine type)
- dump (boolean, optional) -- if true, include the memory in core dumps (default depends on the machine type)
- host-nodes ([int], optional) -- the list of NUMA host nodes to bind the memory to
- policy (HostMemPolicy, optional) -- the NUMA policy (default: 'default')
- prealloc (boolean, optional) -- if true, preallocate memory (default: false)
- prealloc-threads (int, optional) -- number of CPU threads to use for prealloc (default: 1)
- prealloc-context (string, optional) -- thread context to use for creation of preallocation threads (default: none) (since 7.2)
- share (boolean, optional) -- if false, the memory is private to QEMU; if true, it is shared (default false for backends memory-backend-file and memory-backend-ram, true for backends memory-backend-epc, memory-backend-memfd, and memory-backend-shm)
- reserve (boolean, optional) -- if true, reserve swap space (or huge pages) if applicable (default: true) (since 6.1)
- size (int) -- size of the memory region in bytes
- x-use-canonical-path-for-ramblock-id (boolean, optional) -- if true, the canonical path is used for ramblock-id. Disable this for 4.0 machine types or older to allow migration with newer QEMU versions. (default: false generally, but true for machine types <= 4.0)
Note:
prealloc=true and reserve=false cannot be set at the same
time. With reserve=true, the behavior depends on the operating system: for
example, Linux will not reserve swap space for shared file mappings --
"not applicable". In contrast, reserve=false will bail out if it
cannot be configured accordingly.
- Object MemoryBackendFileProperties (Since: 2.1)
- Properties for memory-backend-file objects.
- align (int, optional) -- the base address alignment when QEMU mmap(2)s mem-path. Some backend stores specified by mem-path require an alignment different than the default one used by QEMU, e.g. the device DAX /dev/dax0.0 requires 2M alignment rather than 4K. In such cases, users can specify the required alignment via this option. 0 selects a default alignment (currently the page size). (default: 0)
- offset (int, optional) -- the offset into the target file that the region starts at. You can use this option to back multiple regions with a single file. Must be a multiple of the page size. (default: 0) (since 8.1)
- discard-data (boolean, optional) -- if true, the file contents can be destroyed when QEMU exits, to avoid unnecessarily flushing data to the backing file. Note that discard-data is only an optimization, and QEMU might not discard file contents if it aborts unexpectedly or is terminated using SIGKILL. (default: false)
- mem-path (string) -- the path to either a shared memory or huge page filesystem mount
- pmem (boolean, optional) -- specifies whether the backing file specified by mem-path is in host persistent memory that can be accessed using the SNIA NVM programming model (e.g. Intel NVDIMM).
- readonly (boolean, optional) -- if true, the backing file is opened read-only; if false, it is opened read-write. (default: false)
- rom (OnOffAuto, optional) -- whether to create Read Only Memory (ROM) that cannot be modified by the VM. Any write attempts to such ROM will be denied. Most use cases want writable RAM instead of ROM. However, selected use cases, like R/O NVDIMMs, can benefit from ROM. If set to 'on', create ROM; if set to 'off', create writable RAM; if set to 'auto', the value of the readonly property is used. This property is primarily helpful when we want to have proper RAM in configurations that would traditionally create ROM before this property was introduced: VM templating, where we want to open a file readonly (readonly set to true) and mark the memory to be private for QEMU (share set to false). For this use case, we need writable RAM instead of ROM, and want to set this property to 'off'. (default: auto, since 8.2)
- The members of MemoryBackendProperties.
- Object MemoryBackendMemfdProperties (Since: 2.12)
- Availability: CONFIG_LINUX
Properties for memory-backend-memfd objects.
- hugetlb (boolean, optional) -- if true, the file to be created resides in the hugetlbfs filesystem (default: false)
- hugetlbsize (int, optional) -- the hugetlb page size on systems that support multiple hugetlb page sizes (it must be a power of 2 value supported by the system). 0 selects a default page size. This option is ignored if hugetlb is false. (default: 0)
- seal (boolean, optional) -- if true, create a sealed-file, which will block further resizing of the memory (default: true)
- The members of MemoryBackendProperties.
- Object MemoryBackendShmProperties (Since: 9.1)
- Availability: CONFIG_POSIX
Properties for memory-backend-shm objects.
This memory backend supports only shared memory, which is the default.
- Object MemoryBackendEpcProperties (Since: 6.2)
- Availability: CONFIG_LINUX
Properties for memory-backend-epc objects.
The merge boolean option is false by default with epc
The dump boolean option is false by default with epc
- Object PrManagerHelperProperties (Since: 2.11)
- Availability: CONFIG_LINUX
Properties for pr-manager-helper objects.
- Object QtestProperties (Since: 6.0)
- Properties for qtest objects.
- chardev (string) -- the chardev to be used to receive qtest commands on.
- log (string, optional) -- the path to a log file
- Object RemoteObjectProperties (Since: 6.0)
- Properties for x-remote-object objects.
- fd (string) -- file descriptor name previously passed via getfd <#command-QMP-misc.getfd> command
- devid (string) -- the id of the device to be associated with the file descriptor
- Object VfioUserServerProperties (Since: 7.1)
- Properties for x-vfio-user-server objects.
- socket (SocketAddress) -- socket to be used by the libvfio-user library
- device (string) -- the ID of the device to be emulated at the server
- Object IOMMUFDProperties (Since: 9.0)
- Properties for iommufd objects.
- fd (string, optional) -- file descriptor name previously passed via getfd <#command-QMP-misc.getfd> command, which represents a pre-opened /dev/iommu. This allows the iommufd object to be shared across several subsystems (VFIO, VDPA, ...), and the file descriptor to be shared with other process, e.g. DPDK. (default: QEMU opens /dev/iommu by itself)
- Object AcpiGenericInitiatorProperties (Since: 9.0)
- Properties for acpi-generic-initiator objects.
- pci-dev (string) -- PCI device ID to be associated with the node
- node (int) -- NUMA node associated with the PCI device
- Object AcpiGenericPortProperties (Since: 9.2)
- Properties for acpi-generic-port objects.
- pci-bus (string) -- QOM path of the PCI bus of the hostbridge associated with this SRAT Generic Port Affinity Structure. This is the same as the bus parameter for the root ports attached to this host bridge. The resulting SRAT Generic Port Affinity Structure will refer to the ACPI object in DSDT that represents the host bridge (e.g. ACPI0016 for CXL host bridges). See ACPI 6.5 Section 5.2.16.7 for more information.
- node (int) -- Similar to a NUMA node ID, but instead of providing a reference point used for defining NUMA distances and access characteristics to memory or from an initiator (e.g. CPU), this node defines the boundary point between non-discoverable system buses which must be described by firmware, and a discoverable bus. NUMA distances and access characteristics are defined to and from that point. For system software to establish full initiator to target characteristics this information must be combined with information retrieved from the discoverable part of the path. An example would use CDAT (see UEFI.org) information read from devices and switches in conjunction with link characteristics read from PCIe Configuration space. To get the full path latency from CPU to CXL attached DRAM CXL device: Add the latency from CPU to Generic Port (from HMAT indexed via the node ID in this SRAT structure) to that for CXL bus links, the latency across intermediate switches and from the EP port to the actual memory. Bandwidth is more complex as there may be interleaving across multiple devices and shared links in the path.
- Object RngProperties (Since: 1.3)
- Properties for objects of classes derived from rng.
- opened (boolean, optional) -- if true, the device is opened immediately when applying this option and will probably fail when processing the next option. Don't use; only provided for compatibility. (default: false)
- deprecated -- Member opened is deprecated. Setting true doesn't make sense, and false is already the default.
- Object RngEgdProperties (Since: 1.3)
- Properties for rng-egd objects.
- chardev (string) -- the name of a character device backend that provides the connection to the RNG daemon
- The members of RngProperties.
- Object RngRandomProperties (Since: 1.3)
- Availability: CONFIG_POSIX
Properties for rng-random objects.
- filename (string, optional) -- the filename of the device on the host to obtain entropy from (default: "/dev/urandom")
- The members of RngProperties.
- Object IgvmCfgProperties (Since: 10.1)
- Availability: CONFIG_IGVM
Properties common to objects that handle IGVM files.
- Object SevCommonProperties (Since: 9.1)
- Properties common to objects that are derivatives of sev-common.
- sev-device (string, optional) -- SEV device to use (default: "/dev/sev")
- cbitpos (int, optional) -- C-bit location in page table entry (default: 0)
- reduced-phys-bits (int) -- number of bits in physical addresses that become unavailable when SEV is enabled
- kernel-hashes (boolean, optional) -- if true, add hashes of kernel/initrd/cmdline to a designated guest firmware page for measured boot with -kernel (default: false) (since 6.2)
- Object SevGuestProperties (Since: 2.12)
- Properties for sev-guest objects.
- dh-cert-file (string, optional) -- guest owners DH certificate (encoded with base64)
- session-file (string, optional) -- guest owners session parameters (encoded with base64)
- policy (int, optional) -- SEV policy value (default: 0x1)
- handle (int, optional) -- SEV firmware handle (default: 0)
- legacy-vm-type (OnOffAuto, optional) -- Use legacy KVM_SEV_INIT KVM interface for creating the VM. The newer KVM_SEV_INIT2 interface, from Linux >= 6.10, syncs additional vCPU state when initializing the VMSA structures, which will result in a different guest measurement. Set this to 'on' to force compatibility with older QEMU or kernel versions that rely on legacy KVM_SEV_INIT behavior. 'auto' will behave identically to 'on', but will automatically switch to using KVM_SEV_INIT2 if the user specifies any additional options that require it. If set to 'off', QEMU will require KVM_SEV_INIT2 unconditionally. (default: off) (since 9.1)
- The members of SevCommonProperties.
- Object SevSnpGuestProperties (Since: 9.1)
- Properties for sev-snp-guest objects. Most of these are direct arguments
for the KVM_SNP_* interfaces documented in the Linux kernel source under
Documentation/arch/x86/amd-memory-encryption.rst, which are in turn
closely coupled with the SNP_INIT/SNP_LAUNCH_* firmware commands
documented in the SEV-SNP Firmware ABI Specification (Rev 0.9).
More usage information is also available in the QEMU source tree under docs/amd-memory-encryption.
- policy (int, optional) -- the 'POLICY' parameter to the SNP_LAUNCH_START command, as defined in the SEV-SNP firmware ABI (default: 0x30000)
- guest-visible-workarounds (string, optional) -- 16-byte, base64-encoded blob to report hypervisor-defined workarounds, corresponding to the 'GOSVW' parameter of the SNP_LAUNCH_START command defined in the SEV-SNP firmware ABI (default: all-zero)
- id-block (string, optional) -- 96-byte, base64-encoded blob to provide the 'ID Block' structure for the SNP_LAUNCH_FINISH command defined in the SEV-SNP firmware ABI (default: all-zero)
- id-auth (string, optional) -- 4096-byte, base64-encoded blob to provide the 'ID Authentication Information Structure' for the SNP_LAUNCH_FINISH command defined in the SEV-SNP firmware ABI (default: all-zero)
- author-key-enabled (boolean, optional) -- true if 'id-auth' blob contains the 'AUTHOR_KEY' field defined SEV-SNP firmware ABI (default: false)
- host-data (string, optional) -- 32-byte, base64-encoded, user-defined blob to provide to the guest, as documented for the 'HOST_DATA' parameter of the SNP_LAUNCH_FINISH command in the SEV-SNP firmware ABI (default: all-zero)
- vcek-disabled (boolean, optional) -- Guests are by default allowed to choose between VLEK (Versioned Loaded Endorsement Key) or VCEK (Versioned Chip Endorsement Key) when requesting attestation reports from firmware. Set this to true to disable the use of VCEK. (default: false) (since: 9.1)
- The members of SevCommonProperties.
- Object TdxGuestProperties (Since: 10.1)
- Properties for tdx-guest objects.
- attributes (int, optional) -- The 'attributes' of a TD guest that is passed to KVM_TDX_INIT_VM
- sept-ve-disable (boolean, optional) -- toggle bit 28 of TD attributes to control disabling of EPT violation conversion to #VE on guest TD access of PENDING pages. Some guest OS (e.g., Linux TD guest) may require this to be set, otherwise they refuse to boot.
- mrconfigid (string, optional) -- ID for non-owner-defined configuration of the guest TD, e.g., run-time or OS configuration (base64 encoded SHA384 digest). Defaults to all zeros.
- mrowner (string, optional) -- ID for the guest TD’s owner (base64 encoded SHA384 digest). Defaults to all zeros.
- mrownerconfig (string, optional) -- ID for owner-defined configuration of the guest TD, e.g., specific to the workload rather than the run-time or OS (base64 encoded SHA384 digest). Defaults to all zeros.
- quote-generation-socket (SocketAddress, optional) -- socket address for Quote Generation Service (QGS). QGS is a daemon running on the host. Without it, the guest will not be able to get a TD quote for attestation.
- Object ThreadContextProperties (Since: 7.2)
- Properties for thread context objects.
- cpu-affinity ([int], optional) -- the list of host CPU numbers used as CPU affinity for all threads created in the thread context (default: QEMU main thread CPU affinity)
- node-affinity ([int], optional) -- the list of host node numbers that will be resolved to a list of host CPU numbers used as CPU affinity. This is a shortcut for specifying the list of host CPU numbers belonging to the host nodes manually by setting cpu-affinity. (default: QEMU main thread affinity)
- acpi-generic-initiator -- Not documented
- acpi-generic-port -- Not documented
- authz-list -- Not documented
- authz-listfile -- Not documented
- authz-pam -- Not documented
- authz-simple -- Not documented
- can-bus -- Not documented
- can-host-socketcan -- Not documented
- colo-compare -- Not documented
- cryptodev-backend -- Not documented
- cryptodev-backend-builtin -- Not documented
- cryptodev-backend-lkcf -- Not documented
- cryptodev-vhost-user -- Not documented
- dbus-vmstate -- Not documented
- filter-buffer -- Not documented
- filter-dump -- Not documented
- filter-mirror -- Not documented
- filter-redirector -- Not documented
- filter-replay -- Not documented
- filter-rewriter -- Not documented
- igvm-cfg -- Not documented
- input-barrier -- Not documented
- input-linux -- Not documented
- iommufd -- Not documented
- iothread -- Not documented
- main-loop -- Not documented
- memory-backend-epc -- Not documented
- memory-backend-file -- Not documented
- memory-backend-memfd -- Not documented
- memory-backend-ram -- Not documented
- memory-backend-shm -- Not documented
- pef-guest -- Not documented
- pr-manager-helper -- Not documented
- qtest -- Not documented
- rng-builtin -- Not documented
- rng-egd -- Not documented
- rng-random -- Not documented
- secret -- Not documented
- secret_keyring -- Not documented
- sev-guest -- Not documented
- sev-snp-guest -- Not documented
- thread-context -- Not documented
- s390-pv-guest -- Not documented
- tdx-guest -- Not documented
- throttle-group -- Not documented
- tls-creds-anon -- Not documented
- tls-creds-psk -- Not documented
- tls-creds-x509 -- Not documented
- tls-cipher-suites -- Not documented
- x-remote-object -- Not documented
- x-vfio-user-server -- Not documented
- unstable -- Members x-remote-object and x-vfio-user-server are experimental.
- Object ObjectOptions (Since: 6.0)
- Describes the options of a user creatable QOM object.
- qom-type (ObjectType) -- the class name for the object to be created
- id (string) -- the name of the new object
- When qom-type is acpi-generic-initiator: The members of AcpiGenericInitiatorProperties.
- When qom-type is acpi-generic-port: The members of AcpiGenericPortProperties.
- When qom-type is authz-list: The members of AuthZListProperties.
- When qom-type is authz-listfile: The members of AuthZListFileProperties.
- When qom-type is authz-pam: The members of AuthZPAMProperties.
- When qom-type is authz-simple: The members of AuthZSimpleProperties.
- When qom-type is can-host-socketcan: The members of CanHostSocketcanProperties.
- When qom-type is colo-compare: The members of ColoCompareProperties.
- When qom-type is cryptodev-backend: The members of CryptodevBackendProperties.
- When qom-type is cryptodev-backend-builtin: The members of CryptodevBackendProperties.
- When qom-type is cryptodev-backend-lkcf: The members of CryptodevBackendProperties.
- When qom-type is cryptodev-vhost-user: The members of CryptodevVhostUserProperties.
- When qom-type is dbus-vmstate: The members of DBusVMStateProperties.
- When qom-type is filter-buffer: The members of FilterBufferProperties.
- When qom-type is filter-dump: The members of FilterDumpProperties.
- When qom-type is filter-mirror: The members of FilterMirrorProperties.
- When qom-type is filter-redirector: The members of FilterRedirectorProperties.
- When qom-type is filter-replay: The members of NetfilterProperties.
- When qom-type is filter-rewriter: The members of FilterRewriterProperties.
- When qom-type is igvm-cfg: The members of IgvmCfgProperties.
- When qom-type is input-barrier: The members of InputBarrierProperties.
- When qom-type is input-linux: The members of InputLinuxProperties.
- When qom-type is iommufd: The members of IOMMUFDProperties.
- When qom-type is iothread: The members of IothreadProperties.
- When qom-type is main-loop: The members of MainLoopProperties.
- When qom-type is memory-backend-epc: The members of MemoryBackendEpcProperties.
- When qom-type is memory-backend-file: The members of MemoryBackendFileProperties.
- When qom-type is memory-backend-memfd: The members of MemoryBackendMemfdProperties.
- When qom-type is memory-backend-ram: The members of MemoryBackendProperties.
- When qom-type is memory-backend-shm: The members of MemoryBackendShmProperties.
- When qom-type is pr-manager-helper: The members of PrManagerHelperProperties.
- When qom-type is qtest: The members of QtestProperties.
- When qom-type is rng-builtin: The members of RngProperties.
- When qom-type is rng-egd: The members of RngEgdProperties.
- When qom-type is rng-random: The members of RngRandomProperties.
- When qom-type is secret: The members of SecretProperties.
- When qom-type is secret_keyring: The members of SecretKeyringProperties.
- When qom-type is sev-guest: The members of SevGuestProperties.
- When qom-type is sev-snp-guest: The members of SevSnpGuestProperties.
- When qom-type is tdx-guest: The members of TdxGuestProperties.
- When qom-type is thread-context: The members of ThreadContextProperties.
- When qom-type is throttle-group: The members of ThrottleGroupProperties.
- When qom-type is tls-creds-anon: The members of TlsCredsAnonProperties.
- When qom-type is tls-creds-psk: The members of TlsCredsPskProperties.
- When qom-type is tls-creds-x509: The members of TlsCredsX509Properties.
- When qom-type is tls-cipher-suites: The members of TlsCredsProperties.
- When qom-type is x-remote-object: The members of RemoteObjectProperties.
- When qom-type is x-vfio-user-server: The members of VfioUserServerProperties.
- Command object-add (Since: 2.0)
- Create a QOM object.
-> { "execute": "object-add",
"arguments": { "qom-type": "rng-random", "id": "rng1",
"filename": "/dev/hwrng" } }
<- { "return": {} }
- Command object-del (Since: 2.0)
- Remove a QOM object.
- id (string) -- the name of the QOM object to remove
- If id is not a valid id for a QOM object
Copyright
2025, The QEMU Project Developers