NAME

       acpitool - a Linux ACPI client, allowing you to query or set ACPI values

SYNOPSIS

       acpitool [ -aAbBcefFhjlmnosStTvVwWz ]

DESCRIPTION

       acpitool  is  a  Linux  ACPI  client. It simply reads /proc/acpi or /sys/class entries and
       presents the output in a meaningfull, human-readable format.

       It provides a.o. information on battery status, AC adapter presence, thermal reading, etc.
       This  command  is  most  useful on laptops with an ACPI compliant BIOS and a Linux kernel,
       preferably from the 2.6 series, with ACPI enabled.

       Acpitool also allows the machine to be put into standby, if your laptop supports it.

       If your laptop is a Toshiba , it allows you to set the LCD brighness level and toggle  the
       fan on/off.

       If you have an Asus laptop, it can also set the LCD brightness level, switch the LCD panel
       on or off, and control the mail led and wireless led.

       If you have an IBM Thinkpad laptop, it can once again set the LCD  brightness  level,  and
       also eject the ultrabay device.

OPTIONS

       -a, --ac_adapter
              Show AC adapter presence

       -A     Show  supported  Asus  ACPI  extensions  (LCD  brightness  level, video out routing
              DSDT/acpi4asus info)

       -b     Show battery status information, available batteries only.

       -B, --battery
              Show detailed battery status information, for all battery entries found.

       -c, --cpu
              Show CPU information (type, speed,  PM  capabilities,  throttling  states,  c-state
              usage, frequency scaling).

       -e     Show  just  about  everything  :  more  info on the batteries, ACPI version, kernel
              version, CPU, . . .

       -f, --fan
              Show  fan  status  (shows  fan  info  specific  to  Toshiba  or  IBM  Thinkpad,  if
              applicable).

       -F x   Force  the  fan  on  (x=1) or switch back to auto mode (x=0). Works only on Toshiba
              laptops.  The fan is switched off ONLY if it was forced on first,  not  if  it  was
              switched on automatically. Requires write access to /proc/acpi/toshiba/fan

       -h, --help
              Show help text.

       -j     Eject Thinkpad ultrabay device.  Requires write acces to /proc/acpi/ibm/bay

       -l x   Set  LCD brightness level to x, where x is in the range 0..7. Works only on Toshiba
              and IBM Thinkpad laptops.   Requires  write  access  to  /proc/acpi/tochiba/lcd  or
              /proc/acpi/ibm/brightness
              Illegal values for x will result in the value being set to either 0 or 7.

       -m x   Switch  the  mail  led on (x=1) or off (x=0). Works only on Asus laptops.  Requires
              write access to /proc/acpi/asus/mled

       -n x   Switch the wireless led on  (x=1)  or  off  (x=0).  Works  only  on  Asus  laptops.
              Requires write access to /proc/acpi/asus/wled

       -o x   Switch  the  LCD panel on (x=1) or off (x=0). Works only on Asus laptops.  Requires
              write access to /proc/acpi/asus/lcd

       -s, --suspend to memory
              Put the machine into sleep  state  S3,  if  possible.   Requires  write  access  to
              /proc/acpi/sleep (kernel 2.4.x) or /sys/power/state (kernel 2.6.x)

       -S, --suspend to disk ?
              Put  the  machine  into  sleep  state  S4,  if  possible.  Requires write access to
              /proc/acpi/sleep (kernel 2.4.x) or /sys/power/state (kernel 2.6.x)

       -t, --thermal
              Show thermal zone(s) information, including trip_points.

       -T, --Toshiba
              Show supported Toshiba ACPI extensions, currently being LCD brightness level, video
              out  routing  (what  display  is the video chip sending to) and fan status (on/off,
              forced or not).

       -v     Show more verbose output when something is not found. Makes sense  only  when  used
              together with other options.

       -V, --version
              Show acpitool version number and release date, then exit.

       -w     Show  the  wakeup  capable  devices.  (Available  since  ACPI  20040715, check your
              version).

       -W x   Enable/disable wakeup capable device x. Run 'acpitool -w' to see valid numbers  for
              x.  Requires write access to /proc/acpi/wakeup

       -z x   Set  Asus  LCD brightness level to x, where x is 0..15. Works only on Asus laptops.
              Requires write access to /proc/acpi/asus/brn

REMARKS

       This program absolutely requires a Linux kernel with ACPI support  enabled.  This  program
       will not work without it.

       IBM Thinkpad support is part of the Linux kernel since kernel 2.6.10.

       Don't  blame  me  if acpitool can't suspend your laptop : there are quite some problematic
       laptops out there. Check the acpi-bugzilla list if you don't believe me ;)

       Note that some options, like -F, -l , -j, -s, -W  and -z, require write access to some  of
       the  /proc/acpi  entries.  This  requires  acpitool  either  to  be  run as root or either
       administrative measures must be taken, most likely by root, to  allow  ordinary  users  to
       write  to these files. Creating a group for ACPI users and setting permissions accordingly
       comes to mind.

       Also note that older laptops (< 2000) often simply don't have ACPI support,  they  usually
       support APM only.

BUGS

       Let me know if you think you found one.

FILES

       /proc/acpi/...
       /proc/acpi/toshiba
       /proc/acpi/asus
       /proc/acpi/ibm
       /sys/power/state

HOMEPAGE

       http://freeunix.dyndns.org:8000/site2/acpitool.shtml

AUTHOR

       This  program  is written and maintained by David Leemans (davidleemans |at| scarlet |dot|
       be) and may be freely distributed under the terms  of  the  GNU  General  Public  License.
       There is ABSOLUTELY NO WARRANTY for this program.