Provided by: atari800_3.0.0-1ubuntu2_amd64 bug

NAME

       atari800 - emulator of Atari 8-bit computers and the 5200 console

SYNOPSIS

       atari800 [option]... [file]...

DESCRIPTION

       atari800  emulates the Atari 8-bit computer systems including the 400, 800, 1200XL, 600XL,
       800XL, 65XE, 130XE, 800XE and the XE Game System, and  also  the  Atari  5200  SuperSystem
       console.

OPTIONS

       -help  Print complete and up-to-date list of command line switches

       -v     Print emulator version

       -verbose
              Display framerate when exiting

       -config filename
              Specify an alternative configuration filename

       -autosave-config
              Automatically save the current configuration on emulator exit.

       -no-autosave-config
              Don't save the current configuration on emulator exit (the default).

       -osa_rom filename
              Path to file containing Atari Rev.A Operating System.

       -osb_rom filename
              Path to file containing Atari Rev.B Operating System.

       -xlxe_rom filename
              Path to file containing Atari XL/XE Operating System.

       -5200_rom filename
              Path to file containing Atari 5200 Games System ROM.

       -basic_rom filename
              Path to file containing Atari BASIC ROM.  Used to override paths defined at compile
              time.

       -800-rev auto|a-ntsc|a-pal|b-ntsc|custom
              Select operating system revision for Atari 800:

              auto   The default.  Use the most appropriate from the available ones.
              a-ntsc Use OS rev. A NTSC from early NTSC 400/800 units.
              a-pal  Use OS rev. A PAL from PAL 400/800 units.
              a-pal  Use OS rev. B NTSC from late NTSC 400/800 units.
              custom Use a custom OS.

       -xl-rev auto|10|11|1|2|3a|3b|5|3|4|59|59a|custom
              Select operating system revision for Atari XL/XE:

              auto   The default.  Use the most appropriate from the available ones.
              10     Use OS AA000000 rev. 10 from early 1200XL units.
              11     Use OS AA000001 rev. 11 from late 1200XL units.
              1      Use OS BB000000 rev. 1 from the 600XL.
              2      Use OS BB000001 rev. 2 from the 800XL and early 65XE/130XE units.
              3a     Use prototype OS BB000002 rev. 3 from 1400XL/1450XLD units  (also  known  as
                     1540OS3.V0 and 1450R3V0.ROM).
              3b     Use  prototype  OS  BB000002  rev.  3 ver. 4 from 1400XL/1450XLD units (also
                     known as os1450.128 and 1450R3VX.ROM).
              5      Use prototype OS CC000001 rev. 4 (also known as Rev. 5), for  which  sources
                     are                               available                               at
                     <http://www.atariage.com/forums/topic/78579-a800ossrc/page__view__findpost__p__961535>.
              3      Use OS BB000001 rev. 3 from late 65XE/130XE units.
              4      Use OS BB000001 rev. 4 from the XEGS.
              59     Use OS BB000001 rev. 59 from the Arabic 65XE.
              59a    Use    OS    BB000001    rev.   59   from   Kevin   Savetz'   Arabic   65XE:
                     <http://www.savetz.com/vintagecomputers/arabic65xe/>.
              custom Use a custom OS.

       -5200-rev auto|orig|a|custom
              Select BIOS revision for Atari 5200:

              auto   The default.  Use the most appropriate from the available ones.
              orig   Use BIOS from 4-port and early 2-port 5200 units.
              a      Use BIOS rev. A from late 2-port 5200 units.
              custom Use a custom BIOS.

       -basic-rev auto|a|b|c|custom
              Select BASIC revision:

              auto   The default.  Use the most appropriate from the available ones.
              a      Use BASIC rev. A.
              b      Use BASIC rev. B from early 600XL/800XL units.
              c      Use BASIC rev. C from late 600XL/800XL and all XE units.
              custom Use a custom BASIC.

       -xegame-rev auto|orig|custom
              Select XEGS builtin game version:

              auto   The default.  Use the most appropriate from the available ones.
              orig   Use the original Missile Command game.
              custom Use a custom game ROM.

       -atari Emulate Atari 400/800

       -1200  Emulate Atari 1200XL

       -xl    Emulate Atari 800XL

       -xe    Emulate Atari 130XE

       -320xe Emulate Atari 320XE (Compy-Shop)

       -rambo Emulate Atari 320XE (Rambo)

       -xegs  Emulate Atari XEGS

       -5200  Emulate Atari 5200

       -emuos Use EmuOS

       -c     Enable RAM between 0xc000 and 0xcfff in Atari 800

       -axlon n
              Use Atari 800 Axlon memory expansion: n k total RAM

       -axlon0f
              Use Axlon shadow at 0x0fc0-0x0fff

       -mosaic n
              Use 400/800 Mosaic memory expansion: n k total RAM

       -mapram
              Enable the MapRAM memory expansion.  Works  only  when  emulating  an  Atari  XL/XE
              machine.

       -no-mapram
              Disable the MapRAM memory expansion.

       -pal   Emulate PAL TV mode

       -ntsc  Emulate NTSC TV mode

       -nobasic
              Used  to  disable  Basic  when  starting the emulator in XL/XE mode.  Simulates the
              Option key being held down during system boot.

       -basic Turn on Atari BASIC ROM

       -cart filename
              Insert cartridge (CART or raw format)

       -cart-type 0..59
              Select type of the cartridge inserted with the -cart option.  When inserting a  raw
              ROM image its type cannot be detected automaticcaly, and must be provided with this
              option.  Setting to 0 means disabling the cartridge, and any other number indicates
              a specific cartridge type:
              1      Standard 8 KB cartridge
              2      Standard 16 KB cartridge
              3      OSS two chip 16 KB cartridge (034M)
              4      Standard 32 KB 5200 cartridge
              5      DB 32 KB cartridge
              6      Two chip 16 KB 5200 cartridge
              7      Bounty Bob Strikes Back 40 KB 5200 cartridge
              8      64 KB Williams cartridge
              9      Express 64 KB cartridge
              10     Diamond 64 KB cartridge
              11     SpartaDos X 64 KB cartridge
              12     XEGS 32 KB cartridge
              13     XEGS 64 KB cartridge
              14     XEGS 128 KB cartridge
              15     OSS one chip 16 KB cartridge
              16     One chip 16 KB 5200 cartridge
              17     Atrax 128 KB cartridge
              18     Bounty Bob Strikes Back 40 KB cartridge
              19     Standard 8 KB 5200 cartridge
              20     Standard 4 KB 5200 cartridge
              21     Right slot 8 KB cartridge
              22     32 KB Williams cartridge
              23     XEGS 256 KB cartridge
              24     XEGS 512 KB cartridge
              25     XEGS 1 MB cartridge
              26     MegaCart 16 KB cartridge
              27     MegaCart 32 KB cartridge
              28     MegaCart 64 KB cartridge
              29     MegaCart 128 KB cartridge
              30     MegaCart 256 KB cartridge
              31     MegaCart 512 KB cartridge
              32     MegaCart 1 MB cartridge
              33     Switchable XEGS 32 KB cartridge
              34     Switchable XEGS 64 KB cartridge
              35     Switchable XEGS 128 KB cartridge
              36     Switchable XEGS 256 KB cartridge
              37     Switchable XEGS 512 KB cartridge
              38     Switchable XEGS 1 MB cartridge
              39     Phoenix 8 KB cartridge
              40     Blizzard 16 KB cartridge
              41     Atarimax 128 KB Flash cartridge
              42     Atarimax 1 MB Flash cartridge
              43     SpartaDos X 128 KB cartridge
              44     OSS 8 KB cartridge
              45     OSS two chip 16 KB cartridge (043M)
              46     Blizzard 4 KB cartridge
              47     AST 32 KB cartridge
              48     Atrax SDX 64 KB cartridge
              49     Atrax SDX 128 KB cartridge
              50     Turbosoft 64 KB cartridge
              51     Turbosoft 128 KB cartridge
              52     Ultracart 32 KB cartridge
              53     Low bank 8 KB cartridge
              54     SIC! 128 KB cartridge
              55     SIC! 256 KB cartridge
              56     SIC! 512 KB cartridge
              57     Standard 2 KB cartridge
              58     Standard 4 KB cartridge
              59     Right slot 4 KB cartridge
       If  this option is not given, the user will be asked to choose the cartridge type when the
       emulator starts.

       -cart2 filename
              Insert piggyback cartridge (CART or raw format).  This  works  only  if  the  first
              cartridge is a pass-through (currently only SpartaDOS X 64KB and 128KB types).

       -cart2-type 0..59
              Select type of the cartridge inserted with the -cart2 option.  When inserting a raw
              ROM image its type cannot be detected automatically, and must be provided with this
              option.  The available values are the same as for the -cart-type option above.

       -cart-autoreboot
              Automatically  reboot  after  cartridge  inserting/removing  (this  is  the default
              setting).  This does not apply to the piggyback cartridge - inserting  or  removing
              it never causes automatic reboot.

       -no-cart-autoreboot
              Disable automatic reboot after cartridge inserting/removing.

       -run filename
              Run Atari program (EXE, COM, XEX, BAS, LST)

       -state filename
              Load saved-state file

       -tape filename
              Attach cassette image (CAS format or raw file)

       -boottape filename
              Attach cassette image and boot it

       -tape-readonly
              Set the attached cassette image as read-only.

       -1400  Emulate the Atari 1400XL

       -xld   Emulate the Atari 1450XLD

       -bb    Emulate the CSS Black Box

       -mio   Emulate the ICD MIO board

       -nopatch
              Normally  the  OS is patched giving very fast I/O.  This options prevents the patch
              from being applied so that the OS accesses the serial port hardware directly.  This
              option will probably never be needed since programs that access the serial hardware
              should work even if the OS has been patched.

       -nopatchall
              Don't patch OS at all, H:, P: and R: devices won't work

       -H1 path
              Set path for H1: device

       -H2 path
              Set path for H2: device

       -H3 path
              Set path for H3: device

       -H4 path
              Set path for H4: device

       -Hpath path
              Set path for Atari executables on the H: device

       -hreadonly
              Enable read-only mode for H: device

       -hreadwrite
              Disable read-only mode for H: device

       -devbug
              Put debugging messages for H: and P: devices in log file

       -rtime Enable R-Time 8 emulation

       -nortime
              Disable R-Time 8 emulation

       -rdevice [dev]
              Enable R: device.  If dev is specified then it's used as host  serial  device  name
              (e.g.   /dev/ttyS0  on linux).  If there is no dev specified then R: is directed to
              network.

       -mouse off
              Do not use mouse

       -mouse pad
              Emulate paddles

       -mouse touch
              Emulate Atari Touch Tablet

       -mouse koala
              Emulate Koala Pad

       -mouse pen
              Emulate Light Pen

       -mouse gun
              Emulate Light Gun

       -mouse amiga
              Emulate Amiga mouse

       -mouse st
              Emulate Atari ST mouse

       -mouse trak
              Emulate Atari Trak-Ball

       -mouse joy
              Emulate joystick using mouse

       -mouseport num
              Set mouse port 1-4 (default 1)

       -mousespeed num
              Set mouse speed 1-9 (default 3)

       -multijoy
              Emulate MultiJoy4 interface

       -directmouse
              Use mouse's absolute position

       -cx85 num
              Emulate CX85 numeric keypad on port num

       -grabmouse
              SDL only, prevent mouse pointer from leaving the window

       -record filename
              Record all input events to filename. Can be used for gaming contests (highest score
              etc).

       -playback filename
              Playback input events from filename. Watch an expert play the game.

       -refresh
              Controls  screen  refresh  rate.   A  numerical  value  follows  this  option which
              specifies how many emulated screen updates are required before the actual screen is
              updated.   This value effects the speed of the emulation: A higher value results in
              faster CPU emulation but a less frequently updated screen.

       -artif mode
              Set artifacting mode 0-4 (0 = disable)

       -colors-preset standard|deep-black|vibrant
              Use one of predefined colour adjustments

       -saturation n
              Set screen color saturation (like TV Colour control)

       -ntsc-saturation n, -pal-saturation n
              Set saturation only for NTSC or PAL, respectively

       -contrast n
              Set screen contrast (also called white level)

       -ntsc-contrast n, -pal-contrast -fIn
              Set contrast only for NTSC or PAL, respectively

       -brightness n
              Set screen brightness (also called black level)

       -ntsc-brightness n, -pal-brightness n
              Set brightness only for NTSC or PAL, respectively

       -gamma n
              Set screen gamma correction

       -ntsc-gamma n, -pal-gamma n
              Set gamma adjustment only for NTSC or PAL, respectively

       -tint n
              Set tint -1..1.

       -ntsc-tint n, -pal-tint n
              Set tint only for NTSC or PAL, respectively

       -ntsc-colordelay n
              Set GTIA color delay for NTSC system.  This emulates  adjusting  the  potentiometer
              existing at the bottom of Atari computers, which adjusts hues of colors produced by
              the computer.

       -pal-colordelay n
              Set GTIA color delay for PAL system.

       -paletten filename, -palettep filename
              Read Atari NTSC/PAL colors from ACT file

       -paletten-adjust, -palettep-adjust
              Apply colour adjustments (brightness, contrast etc.) to the loaded NTSC/PAL palette
              (by default the loaded palette is displayed unmodified).

       -screenshots pattern
              Set  filename  pattern  for screenshots.  Use to override the default atari000.png,
              atari001.png etc.  filenames.  Hashes are replaced with raising numbers.   Existing
              files are overwritten only if all the files defined by the pattern exist.

       -showspeed
              Show percentage of actual speed

       -sound Enable sound

       -nosound
              Disable sound

       -dsprate freq
              Set mixing frequency (Hz)

       -snddelay time
              Set sound delay (milliseconds)

   Curses Options
       -left  Use columns 0 to 39

       -central
              Use columns 20 to 59

       -right Use columns 40 to 79

       -wide1 Use columns 0 to 79.  In this mode only the even character positions are used.  The
              odd locations are filled with spaces.

       -wide2 Use columns 0 to 79.  This mode is similar to -wide1 except that the spaces are  in
              reverse video if the previous character was also in reverse video.

   Falcon Options
       -interlace x
              Generate Falcon screen only every x frame

       -videl Direct VIDEL programming (Falcon/VGA only)

       -double
              Double the screen size on NOVA

       -delta Delta screen output (differences only)

       -joyswap
              Swap joysticks

   Java NestedVM Options
       -scale n
              Scale width and height by n

   SDL Options
       -fullscreen
              Start  in  fullscreen  mode.   The  default  resolution is 336x240 and can be later
              changed.

       -windowed
              Start in a window (the default).

       -rotate90
              Rotate display (useful for devices with 240x320 screen).

       -no-rotate90
              Don't rotate display (the default).

       -fs-width number-of-pixels
              Host horizontal resolution for fullscreen.

       -fs-height number-of-pixels
              Host vertical resolution for fullscreen.

       -win-width number-of-pixels
              Set horizontal size of the window.  The window can be later resized manually.

       -win-height number-of-pixels
              Set vertical size of the window.  The window can be later resized nanually.

       -bpp number-of-bits
              Sets image color depth when OpenGL acceleration is disabled.  Accepted values  are:
              0 (use desktop depth; this is the default), 8, 16 and 32.  Depending on the type of
              graphics hardware, the fullscreen setting and current desktop bit depth, either  of
              the  values  might  give  the best performance.  Note that with bit depth set to 16
              emulation of colors is slightly less accurate.

       -vsync Synchronize the display with  the  monitor's  vertical  retrace,  to  remove  image
              tearing  artifacts.   This  improves  display  quality,  but  may  be not available
              depending  on  the   current   wideo   mode   (fullscreen/windowed),   the   chosen
              SDL_VIDEODRIVER  and  type  of graphics hardware.  Synchronization is available for
              some SDL videodrivers (directx, dga) but not for others.  In OpenGL this option has
              no  effect - vertical synchronization must be instead enabled in the video hardware
              driver's settings, if available.

       -no-vsync
              Disable synchronization with monitor's vertical retrace (the default).

       -horiz-area narrow|tv|full|number
              Set amount of visible screen horizontally:

              narrow Shows 320 pixels.
              tv     The default.  Shows area visible on a standard TV (336 pixels).
              full   Shows full overscan area (384 pixels).
              number An exact horizontal size can be set by providing a number  between  160  and
                     384.

       -vertical-area short|tv|full|number
              Set amount of visible screen vertically:

              short  Shows 200 pixels.
              tv     The  default.   Shows  area  visible  on  a  typical  TV (224 or 240 pixels,
                     depending on current TV system).
              full   Shows full overscan area, which can be up to  300  pixels  in  case  of  the
                     XEP80.
              number An  exact  number  of  visible  scanlines  can  be set by providing a number
                     between 100 and 300.

       Note that when displaying output of an XEP80 or Austin Franklin 80  column  card,  the  tv
       setting  will  crop  the  top and bottom parts of text area, just like a real TV does - in
       such case setting the option to full would be more appriopriate.

       -horiz-shift number
              When the visible horizontal area is not set to  full,  this  option  specifies  the
              screen's  area  that will be visible.  Values higher than 0 will cause showing more
              of the right side of the screen, while values lower than 0 will cause showing  more
              of the left side.  The default is 0 (no shift).  -vert-shift number Analogically to
              -horiz-shift: when the visible vertical area  is  not  set  to  full,  this  option
              specifies  the screen's area that will be visible.  Values higher than 0 will cause
              showing more of the bottom part of the screen, while values lower than 0 will cause
              showing more of the top part.  The default is 0 (no shift).

       -stretch none|integral|full|number
              Choose method of stretching the image to fit the screen/window area:

              none   The image won't be stretched at all.
              integral
                     The  default.   The  image  will fit the screen/window but will be stretched
                     only by an integral multiplier.  This setting allows for  nice  output  when
                     using scanlines in low screen resolutions.
              full   The  screen will fit the entire screen/window area.  This setting looks best
                     in high screen resolutions.
              number A custom  multiplier  (floating  point  number)  can  be  also  provided  to
                     precisely set the amount of stretching.

       -fit-screen width|heightWhen -stretch is set to integral or full, this parameter
              controls how the stretching is performed with relation to window/screen size:

              width  Fits the image's width while allowing it to be cropped vertically.
              height Fits the image's height while allowing it to be cropped horizontally.
              both   The default.  Fit both the image's width and height, avoiding cropping.

       -image-aspect none|square-pixels|real
              Choose how the image's aspect ratio should be maintained when stretching:

              none   Causes   the   image   to  be  stretched  without  restriction  to  fit  the
                     screen/window area fully.
              square-pixels
                     The  default.   Causes  the  image  to  be  stretched  by  the  same  amount
                     horizontally  and  vertically,  maintaining  square  pixels.   In low screen
                     resolutions this setting may produce the nicest result.
              real   Recreates the aspect ratio of a real TV display (pixels are not square), but
                     only if the -host-aspect-ratio option is set correctly.

       -host-aspect-ratio auto|x:y
              Set the aspect ratio of the host monitor on which the emulator's display is placed.
              Allowed values are auto for autodetection, or ratios like  4:3,  16:9,  1.25:1  ...
              This  value  is  used  to  properly  maintain  image's  aspect  ratio  when  having
              -image-aspect set to real.  The default value is auto.  Note that host aspect ratio
              detection  works as expected only if the desktop resolution matches aspect ratio of
              the display device (in other words, display pixels are square).  If,  for  example,
              desktop  resolution  is 800x600 on a 16:9 monitor, autodetection will fail and host
              aspect ratio will have to be set manually, by measuring physical width  and  height
              of the monitor and setting the parameter to width:height.

       -80column
              Shows  output  of  an 80 column hardware, when it is available (the default).  This
              parameter has effect only if an 80 column hardware is activated, using one  of  the
              parameters -af80, -proto80 or -af80.

       -no-80column
              Deactivates showing output of an 80 column hardware.

       -audio16
              Enable 16-bit sound output

       -nojoystick
              Do not initialize SDL joysticks

       -joy0 path-to-device
              Define path to device used in LPTjoy 0. Available on linux-ia32 only.

       -joy1 path-to-device
              Define path to device used in LPTjoy 1. Available on linux-ia32 only.

       -ntscemu
              Activate  NTSC  filter.  This  faithfully  emulates NTSC composite video artifacts.
              -artif is not needed in this mode and will not work.

       -no-ntscemu
              Disable NTSC filter.

       -ntsc-filter-preset composite|svideo|rgb|monochrome
              Use one of predefined NTSC filter adjustments.

       -ntsc-sharpness n
              Set sharpness of the NTSC filter.

       -ntsc-resolution n
              Set resolution of the NTSC filter.

       -ntsc-artifacts n
              Set artifacts of the NTSC filter.

       -ntsc-fringing n
              Set fringing of the NTSC filter.

       -ntsc-bleed n
              Set bleed of the NTSC filter.

       -ntsc-burstphase n
              Set burst phase of the NTSC filter.  This changes colors of  artifacts.   The  best
              values are 0, 0.5, 1, 1.5.

       -scanlines n
              Set visibility of scanlines (0..100).  Scanlines are only visible when the screen's
              or window's vertical size is at least 480  (more  precisely,  at  least  twice  the
              number of scanlines given in -vert-area).

       -scanlinesint
              Enable scanlines interpolation (looks nicer).

       -no-scanlinesint
              Disable scanlines interpolation (in software modes may give better performance).

       -video-accel
              Use  OpenGL  hardware  acceleration for displaying and stretching of the emulator's
              display.  Using OpenGL improves performance.

       -no-video-accel
              Don't use OpenGL hardware acceleration (the default).

       -pixel-format bgr16|rgb16|bgra32|argb32
              Choose format of texture data when OpenGL acceleration is  enabled.   Depending  on
              the  type  of  the  graphics  hardware,  either  of  the values might give the best
              performance.  Note that with pixel format set  to  bgr16  or  rgb16,  emulation  of
              colors is slightly less accurate.

       -pbo   Use  Pixel  Buffer Objects when OpenGL acceleration is enabled (the default).  PBOs
              are available on newer graphics  hardware  and  when  used,  substantially  improve
              emulator's  performance.   However  in rare cases (some Intel on-board chips) using
              PBOs may actually descrease perfromance.

       -no-pbo
              Don't use Pixel Buffer Objects when OpenGL acceleration is used.

       -bilinear-filter
              Enable bilinear filtering of the screen in OpenGL modes.

       -no-bilinear-filter
              Disable bilinear filtering in OpenGL modes (the default).

       -opengl-lib path
              Provide a custom OpenGL shared library.  If not given, Atari800 will use a  default
              system-specific library (typically opengl32.dll or libGL.so).

       -proto80
              Emulate a prototype 80 column board for the 1090

       -xep80 Emulate the XEP80

       -xep80port n
              Use XEP80 on joystick port n

       -af80  Emulate the Austin Franklin 80 column daughterboard for Atari 800.

   X11 Options
       -small Run the emulator in a small window where each Atari 800 pixel is represented by one
              X Window pixel

       -large Runs the emulator in a large window where each Atari 800 pixel is represented by  a
              2x2 X Window rectangle. This mode is selected by default.

       -huge  Runs  the  emulator in a huge window where each Atari 800 pixel is represented by a
              3x3 X Window rectangle.

       -clip_x number-of-pixels
              Set left offset for clipping

       -clip_width number-of-pixels
              Set the width of the clipping-area

       -clip_y number-of-pixels
              Set top offset for clipping

       -clip_height number-of-pixels
              Set the height of the clipping-area

       -private_cmap
              Use private colormap

       -sio   Show SIO monitor

       -x11bug
              Enable debug code in atari_x11.c

       -keypad
              Keypad mode

KEYBOARD, JOYSTICK AND OTHER CONTROLLERS

       F1                    Built in user interface
       F2                    Option key
       F3                    Select key
       F4                    Start key
       F5                    Reset key ("warm reset")
       Shift+F5              Reboot ("cold reset")
       F6                    Help key (XL/XE only)
       F7                    Break key
       F8                    Enter monitor
       F9                    Exit emulator
       F10                   Save screenshot
       Shift+F10             Save interlaced screenshot
       Alt+R                 Run Atari program
       Alt+D                 Disk management
       Alt+C                 Cartridge management
       Alt+Y                 Select system
       Alt+O                 Sound settings
       Alt+W                 Sound recording start/stop
       Alt+S                 Save state file
       Alt+L                 Load state file
       Alt+A                 About the emulator
       Insert                Insert line (Atari Shift+'>')
       Ctrl+Insert           Insert character (Atari Ctrl+'>')
       Shift+Ctrl+Insert     Shift+Ctrl+'>'
       Delete                Delete line (Atari Shift+Backspace)
       Shift+Backspace       Delete line (Atari Shift+Backspace)
       Ctrl+Delete           Delete character (Atari Ctrl+Backspace)
       Ctrl+Backspace        Delete character (Atari Ctrl+Backspace)
       Shift+Ctrl+Delete     Shift+Ctrl+Backspace
       Shift+Ctrl+Backspace  Shift+Ctrl+Backspace
       Home                  Clear (Atari Shift+'<')
       Ctrl+Home             Ctrl+'<' (also clears screen)
       Shift+Ctrl+Home       Shift+Ctrl+'<'
       ~                     Inverse video
       Up                    Up (Atari Ctrl+'-')
       Down                  Down (Atari Ctrl+'=')
       Left                  Left (Atari ctrl+'+')
       Right                 Right (Atari ctrl+'*')
       Ctrl+Up               -
       Ctrl+Down             =
       Ctrl+Left             +
       Ctrl+Right            *
       Shift+Up              _ (Atari Shift+'-')
       Shift+Down            | (Atari Shift+'=')
       Shift+Left             (Atari Shift+'+')
       Shift+Right           ^ (Atari Shift+'*')
       Shift+Ctrl+Up         Shift+Ctrl+-
       Shift+Ctrl+Down       Shift+Ctrl+=
       Ctrl+\                Ctrl+Esc  (Workaround for Windows)
       Shift+Ctrl+\          Shift+Ctrl+Esc (Workaround for Windows)

   CX85 Keypad (if enabled):
       host keypad 0123456789-. 0123456789-.
       host keypad              NO
       host keypad Ctrl+/       ESCAPE
       host keypad *            DELETE
       host keypad +            YES
       host keypad Enter        +ENTER

       Paddles, Atari touch tablet, Koala pad, light pen, light gun, ST/Amiga mouse, Atari  trak-
       ball,  joystick  and  Atari  5200 analog controller are emulated using mouse on ports that
       support it.  See the options above for how to enable mouse.

   Basic
       No function keys or Alt+letter shortcuts.  Use Ctrl+C to enter the  monitor.   Controllers
       not supported in this version.

   Curses
       F10  (Save  screenshot)  does  not  work  in the default CURSES_BASIC build.  Shift+F5 and
       Shift+F10 don't work at all.  Avoid Ctrl + C, H, J, M, Q, S and Z.  The remaining  control
       characters  can  be  typed.   Control  characters  are  displayed  on  the screen with the
       associated upper case character in bold.

       Controllers not supported in this version.

   Falcon
       Help   Help key (XL/XE)

       Joystick 0 is operated by the numeric keypad (make sure that the numeric keypad  has  been
       enabled).

               7 8 9
                \|/
               4 5 6
                /|\
               1 2 3

               And 0 is the fire key.

       Mouse not supported in this version.

   SDL
       `              Atari/Inverse key
       LSUPER         Atari/Inverse key (unusable under Windows)
       RSUPER         CapsToggle (+Shift = CapsLock)

       LAlt+F         Switch fullscreen/windowed display.
       LAlt+G         Switch visible horizontal area. See -horiz-area.
       LAlt+J         Swap keyboard_emulated joysticks
       LAlt+M         Grab mouse (prevents mouse pointer from leaving the window)

       LAlt+LShift+1  Decrease tint (also called hue)
       LAlt+1         Increase hue
       LAlt+LShift+2  Decrease saturation (like TV Colour control)
       LAlt+2         Increase saturation
       LAlt+LShift+3  Decrease contrast (also called white level)
       LAlt+3         Increase contrast
       LAlt+LShift+4  Decrease brightness (also called black level)
       LAlt+4         Increase brightness
       LAlt+LShift+5  Decrease gamma adjustment
       LAlt+5         Increase gamma adjustment
       LAlt+LShift+6  Decrease color delay (Atari color adjustment potentiometer)
       LAlt+6         Increase color delay

       These keys work only in the NTSC filter mode (-ntscemu):
              LAlt+LShift+7  Decrease sharpness
              LAlt+7         Increase sharpness
              LAlt+LShift+8  Decrease resolution
              LAlt+8         Increase resolution
              LAlt+LShift+9  Decrease artifacts
              LAlt+9         Increase artifacts
              LAlt+LShift+0  Decrease fringing
              LAlt+0         Increase fringing
              LAlt+LShift+-  Decrease bleed
              LAlt+-         Increase bleed
              LAlt+LShift+=  Decrease NTSC burst phase (use this to change artifacting colours)
              LAlt+=         Increase NTSC burst phase

       LAlt+LShift+[  Decrease scanlines visibility
       LAlt+[         Increase scanlines visibility
       LAlt+]         Toggle NTSC composite/S-Video/RGB/monochrome settings

       LAlt+Shift+X   Enable/disable output of a 80 column hardware (use with -xep80, -proto80 or
                      -af80).

       Apart from standard joysticks (handled by the  SDL)  up  to  two  keyboard  joysticks  are
       supported.  The keys used for joystick directions and the trigger can be freely defined in
       the config UI (Controller Config -> Define layout).  Keyboard joystick  emulation  can  be
       enabled/disabled  in  the  Controller  Config.   By default, joy 0 is enabled and joy 1 is
       disabled (to not steal normal AWDS keys in the emulator).

   X11
       Alt    Atari key (either Alt key will work)

       Joystick 0 is operated by the mouse position relative to the center  of  the  screen.  The
       mouse button acts as the trigger.  On Linux, standard joysticks are also supported.

FILES

       /usr/share/atari800/ATARIOSA.ROM
              Atari O/S A

       /usr/share/atari800/ATARIOSB.ROM
              Atari O/S B

       /usr/share/atari800/ATARIXL.ROM
              Atari 800XL O/S

       /usr/share/atari800/ATARI5200.ROM
              Atari 5200 O/S

       /usr/share/atari800/ATARIBAS.ROM
              Atari Basic

BUGS

       See the BUGS file.