Provided by: refdb-clients_1.0.2-1_amd64 bug

NAME

       bib2ris, bib2ris-utf8 - converts bibtex bibliographic data to the RIS format

SYNOPSIS

       bib2ris [-e log-destination] [-h] [-j] [-l log-level] [-L log-file] [-q] [-s separator]
               [-v] [-y confdir] file

       bib2ris-utf8 [-e log-destination] [-h] [-j] [-l log-level] [-L log-file] [-q]
                    [-s separator] [-v] [-y confdir] file

DESCRIPTION

       bib2ris converts BibTeX bibliography files into RIS files. Latex commands, including
       non-ASCII characters written as commands, are preserved in the output. Importing the
       output of the bib2ris utility directly into RefDB is useful only if you use the data
       exclusively for LaTeX.

       bib2ris-utf8 is a variant which converts foreign characters to UTF-8 and strips all other
       LaTeX commands by means of the refdb_latex2utf8txt (1) tool. The output of bib2ris-utf8 is
       the preferred format for import into RefDB as it is suitable for both LaTeX and SGML/XML
       bibliographies.

       Unfortunately the concepts underlying BibTeX and RIS bibliographic data are quite
       different so that BibTeX data do not readily lend themselves to a clean conversion to the
       RIS format. This is not meant as an excuse to provide a bad filter but you should be aware
       that a few compile-time assumptions have to be made in order to get reasonable results. In
       any case, as the data models differ considerably, a loss-free round-trip conversion
       between the two data types is not possible: If you convert a BibTeX bibliography file to
       RIS and then back, the result will differ considerably from your input.

       The following considerations apply to the data import into RefDB and the data export from
       RefDB:

        1. BibTeX input data that are not written in UTF-8, that use formatting commands like
           font name, weight, or posture specifications, or that use LaTeX commands to write
           foreign and special characters should always be converted with bib2ris-utf8.

        2. BibTeX output data will have the LaTeX command characters properly escaped. The data
           will use the default encoding of your reference database unless you specifically
           request a different encoding with the getref command or with the refdbib tool. Keep in
           mind that recent LaTeX installations can work with UTF-8 data using the following
           incantation in the prolog, allowing the easiest support for all kinds of foreign
           characters:

               \usepackage[utf8]{inputenc}

OPTIONS

       -e log-destination
           log-destination can have the values 0, 1, or 2, or the equivalent strings stderr,
           syslog, or file, respectively. This value specifies where the log information goes to.
           0 (zero) means the messages are sent to stderr. They are immediately available on the
           screen but they may interfere with command output.  1 will send the output to the
           syslog facility. Keep in mind that syslog must be configured to accept log messages
           from user programs, see the syslog(8) man page for further information. Unix-like
           systems usually save these messages in /var/log/user.log.  2 will send the messages to
           a custom log file which can be specified with the -L option.

       -h
           Displays help and usage screen, then exits.

       -j
           Force bib2ris to use JO RIS fields in all cases. If this option is not used, bib2ris
           tries to infer whether a journal name is an abbreviation or not. If the string
           contains at least one period, JO will be used, otherwise JF will be used.

       -l log-level
           Specify the priority up to which events are logged. This is either a number between 0
           and 7 or one of the strings emerg, alert, crit, err, warning, notice, info, debug,
           respectively (see also Log level definitions).  -1 disables logging completely. A low
           log level like 0 means that only the most critical messages are logged. A higher log
           level means that less critical events are logged as well.  7 will include debug
           messages. The latter can be verbose and abundant, so you want to avoid this log level
           unless you need to track down problems.

       -L log-file
           Specify the full path to a log file that will receive the log messages. Typically this
           would be /var/log/refdba.

       -q
           Start without reading the configuration files. The client will use the compile-time
           defaults for all values that you do not set with command-line switches.

       -s separator
           Specify the delimiter which separates individual keywords in a non-standard keyword
           field. Use the string spc for whitespace-separated lists (spaces and tabs).

       -v
           Prints version and copyright information, then exits.

       -y confdir
           Specify the directory where the global configuration files are Note: By default, all
           RefDB applications look for their configuration files in a directory that is specified
           during the configure step when building the package. That is, you don't need the -y
           option unless you use precompiled binaries in unusual locations, e.g. by relocating a
           rpm package.

       file
           If used, this parameter denotes the names of one or more bibtex files. If no file is
           specified, bib2ris tries to read the data from stdin. Output is always sent to stdout.

DIAGNOSTICS

       The exit code of bib2ris indicates what went wrong in general (the details can be found in
       the log output). The code is the sum of the following error values:

       1
           general error; includes out of memory situations and invalid command-line options

       2
           incomplete entry (at least one essential field in an entry was missing)

       4
           unknown field name

       8
           unknown publication type

       16
           invalid BibTeX->RIS type mapping

       32
           parse error; includes file access errors

CONFIGURATION

       bib2ris evaluates the file bib2risrc to initialize itself.

       Table 1. bib2risrc
       ┌─────────────────┬──────────────────────┬──────────────────────────┐
       │VariableDefaultComment                  │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │logfile          │ /var/log/bib2ris.log │ The full path of a       │
       │                 │                      │ custom log file. This is │
       │                 │                      │ used only if logdest is  │
       │                 │                      │ set appropriately.       │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │logdest          │ 1                    │ The destination of the   │
       │                 │                      │ log information. 0 =     │
       │                 │                      │ print to stderr; 1 = use │
       │                 │                      │ the syslog facility; 2 = │
       │                 │                      │ use a custom logfile.    │
       │                 │                      │ The latter needs a       │
       │                 │                      │ proper setting of        │
       │                 │                      │ logfile.                 │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │loglevel         │ 6                    │ The log level up to      │
       │                 │                      │ which messages will be   │
       │                 │                      │ sent. A low setting (0)  │
       │                 │                      │ allows only the most     │
       │                 │                      │ important messages, a    │
       │                 │                      │ high setting (7) allows  │
       │                 │                      │ all messages including   │
       │                 │                      │ debug messages. -1 means │
       │                 │                      │ nothing will be logged.  │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │abbrevfirst      │ t                    │ If this option is set to │
       │                 │                      │ "t", the first names of  │
       │                 │                      │ all authors and editors  │
       │                 │                      │ will be abbreviated to   │
       │                 │                      │ the initials. If set to  │
       │                 │                      │ "f", the first names     │
       │                 │                      │ will be used as they are │
       │                 │                      │ found in the BibTeX      │
       │                 │                      │ bibliography file.       │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │listsep          │ ;                    │ This is the delimiter    │
       │                 │                      │ which separates          │
       │                 │                      │ individual keywords in a │
       │                 │                      │ non-standard keyword     │
       │                 │                      │ field. Use the string    │
       │                 │                      │ "spc" for                │
       │                 │                      │ whitespace-separated     │
       │                 │                      │ lists (spaces and tabs). │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │forcejabbrev     │ f                    │ If this is set to "t",   │
       │                 │                      │ journal names will be    │
       │                 │                      │ wrapped in RIS "JO"      │
       │                 │                      │ entries. If it is set to │
       │                 │                      │ "f", bib2ris will use    │
       │                 │                      │ "JO" entries only if the │
       │                 │                      │ journal name contains at │
       │                 │                      │ least one period,        │
       │                 │                      │ otherwise it will use    │
       │                 │                      │ "JF".                    │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │maparticle       │ JOUR                 │ map the BibTeX article   │
       │                 │                      │ publication type to a    │
       │                 │                      │ RIS type                 │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapbook          │ BOOK                 │ map the BibTeX book      │
       │                 │                      │ publication type to a    │
       │                 │                      │ RIS type                 │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapbooklet       │ PAMP                 │ map the BibTeX booklet   │
       │                 │                      │ publication type to a    │
       │                 │                      │ RIS type                 │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapconference    │ CHAP                 │ map the BibTeX           │
       │                 │                      │ conference publication   │
       │                 │                      │ type to a RIS type       │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapinbook        │ CHAP                 │ map the BibTeX inbook    │
       │                 │                      │ publication type to a    │
       │                 │                      │ RIS type                 │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapincollection  │ CHAP                 │ map the BibTeX           │
       │                 │                      │ incollection publication │
       │                 │                      │ type to a RIS type       │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapinproceedings │ CHAP                 │ map the BibTeX           │
       │                 │                      │ inproceedings            │
       │                 │                      │ publication type to a    │
       │                 │                      │ RIS type                 │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapmanual        │ BOOK                 │ map the BibTeX manual    │
       │                 │                      │ publication type to a    │
       │                 │                      │ RIS type                 │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapmastersthesis │ THES                 │ map the BibTeX           │
       │                 │                      │ mastersthesis            │
       │                 │                      │ publication type to a    │
       │                 │                      │ RIS type                 │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapmisc          │ GEN                  │ map the BibTeX misc      │
       │                 │                      │ publication type to a    │
       │                 │                      │ RIS type                 │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapphdthesis     │ THES                 │ map the BibTeX phdthesis │
       │                 │                      │ publication type to a    │
       │                 │                      │ RIS type                 │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapproceedings   │ CONF                 │ map the BibTeX           │
       │                 │                      │ proceedings publication  │
       │                 │                      │ type to a RIS type       │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │maptechreport    │ RPRT                 │ map the BibTeX           │
       │                 │                      │ techreport publication   │
       │                 │                      │ type to a RIS type       │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │mapunpublished   │ UNPB                 │ map the BibTeX           │
       │                 │                      │ unpublished publication  │
       │                 │                      │ type to a RIS type       │
       ├─────────────────┼──────────────────────┼──────────────────────────┤
       │nsf_xyz          │ (none)               │ You can specify an       │
       │                 │                      │ unlimited number of      │
       │                 │                      │ these entries to map     │
       │                 │                      │ non-standard BibTeX      │
       │                 │                      │ fields to RIS tags. The  │
       │                 │                      │ BibTeX field name in     │
       │                 │                      │ this variable has to be  │
       │                 │                      │ in lowercase, regardless │
       │                 │                      │ of the case in your      │
       │                 │                      │ input data (bib2ris      │
       │                 │                      │ treats field names as    │
       │                 │                      │ case-insensitive). The   │
       │                 │                      │ two-letter RIS tag has   │
       │                 │                      │ to be in uppercase. E.g. │
       │                 │                      │ to map your BibTeX       │
       │                 │                      │ "Abstract" field to the  │
       │                 │                      │ RIS "N2" tag, the entry  │
       │                 │                      │ would read:              │
       │                 │                      │ "nsf_abstract N2".       │
       └─────────────────┴──────────────────────┴──────────────────────────┘

DATA PROCESSING

       This section provides a few hints about the data conversion itself and the BibTeX format
       requirements.

       •   The parsing of the input data is done by the btparse library. All limitations of that
           library apply to bib2ris as well. This applies very specifically to two hardcoded
           settings in btparse which, simply put, limit the size and complexity (in terms of
           macros) of an input file that btparse can handle. If you run into this kind of problem
           (I had to pull a 2 MB BibTeX bibliography from the net in order to verify this limit)
           you should increase the values of NUM_MACROS and STRING_SIZE in the source file
           macros.c and recompile the btparse library.

       •   All entry names and field names in the BibTeX input file are treated as
           case-insensitive, i.e. "BoOk" is the same as "book" and "AUTHOR" is the same as
           "aUthoR".

       •   The entries are checked for completeness. An error is generated if an entry lacks
           fields which are considered essential for the particular publication type.

       •   Non-standard fields can be imported in addition to the predefined BibTeX fields.
           Create an entry for each non-standard BibTeX field name that your input data use in
           your bib2ris configuration file. The data are handled differently based on the type of
           RIS field they are imported to. If the data are imported to the RIS fields AD, N1, or
           N2, which basically have an unlimited size, all occurrences of these fields will be
           concatenated into a single AD, N1, or N2 tag line, respectively. If the data are
           mapped to the RIS KW field, the string will be tokenized based on the list separator
           specified in the listsep configuration variable. Each token will be written as a
           separate KW tag line. A special case is the RIS pseudo-field "PY.day". Data imported
           to this tag are integrated as the day part in the publication date tag line "PY" (year
           and month, but not day, are standard BibTeX fields and are recognized by default). All
           other fields will be printed with their requested RIS tag. It is at the discretion of
           any RIS importing application to decide what to do with duplicate tag lines. Multiples
           are allowed for author tags (AU, A2, A3) and the keyword tag (KW). refdb will use the
           last occurrence of a tag line that does not allow multiple occurrences.

       •   Abbreviated journal names are detected only if they use periods. E.g.  “J. Biol.
           Chem.”  will be mapped to a "JO" RIS element whereas “J Biol Chem” will be
           (incorrectly) mapped to a "JF" element (“Journal of Biological Chemistry” would
           correctly end up here too). Spaces after periods are optional. To capture “J Biol
           Chem” in a "JO" element, use the -j command line option or the "forcejabbrev"
           configuration file variable.

       •   The mapping of BibTeX publication types (book, inproceedings...) to RIS types as
           specified in the configuration file is checked for valid RIS types. If an invalid RIS
           type is specified, an error is generated and the compile-time default is used instead.

       •   By default the first names of authors and editors are not abbreviated. If you wish you
           can configure bib2ris to abbreviate first and middle names.

FILES

       PREFIX/etc/refdb/bib2risrc
           The global configuration file of bib2ris.

       $HOME/.bib2risrc
           The user configuration file of bib2ris.

SEE ALSO

       RefDB (7), refdb_latex2utf8txt (1), db2ris (1), en2ris (1), marc2ris (1), med2ris (1).

       RefDB manual (local copy) PREFIX/share/doc/refdb-<version>/refdb-manual/index.html

       RefDB manual (web) <http://refdb.sourceforge.net/manual/index.html>

       RefDB on the web <http://refdb.sourceforge.net/>

AUTHOR

       bib2ris was written by Markus Hoenicka <markus@mhoenicka.de>.